On Wed, Jun 10, 2009 at 5:55 AM, wrote:
> From: Muralidharan Karicheri
>
> re-sending with RFC in the header
>
> This patch adds support for setting bus parameters such as bus type
> (BT.656, BT.1120 etc), width (example 10 bit raw image data bus)
> and polarities (vsync, hsync, field etc) in sub
Mauro,
Please pull from http://kernellabs.com/hg/~dheitmueller/au8522-qam64
for the following:
- au8522: add support for QAM-64 modulation type
The patch went in unmodified after doing some testing to ensure it
didn't break anything with VSB or QAM256 (and adding a proper patch
description). Th
To add another data-point, I am also getting this error with the same
board ... as far as I have been able to test, it's something that was
OK in 2.6.27, regressed in 2.6.28 and is still a problem in 2.6.30.
Note that this is the rev.1 DViCO
lsb_release -rd
Description:Ubuntu karmic (developm
On Sat, 13 Jun 2009 18:12:10 +1000
Hans de Goede wrote:
> Getting ovfx2 support into the mainline kernel sounds like a good idea!
>
> I'm not such a big fan of merging the driver as is though, as it does
> its own buffer management (and ioctl handling, usb interrupt handling,
> locking, etc).
Mauro,
Please pull from http://mercurial.intuxication.org/hg/v4l-dvb-commits
for the following 4 changesets:
01/04: Remote control debugging for dw2102 driver based USB cards
http://mercurial.intuxication.org/hg/v4l-dvb-commits?cmd=changeset;node=6d3b1e91f924
02/04: Add keymaps for TeVii and TB
Hello Mauro,
Please pull from
http://kernellabs.com/hg/~dheitmueller/em28xx-no-audio for the
following:
- em28xx: don't create audio device if not supported
This should correct the problems you noticed with the previous patch
in the misc-fixes tree.
Tested with Kworld 2800d and HVR-950. Would
On 15 June 2009 01:49:09 Simon Kenyon wrote:
> Igor M. Liplianin wrote:
> > On 6 June 2009 23:37:47 Simon Kenyon wrote:
> >> Igor M. Liplianin wrote:
> >>> On 5 June 2009 21:41:46 Simon Kenyon wrote:
> Simon Kenyon wrote:
> > Simon Kenyon wrote:
> >> the picture seems to be breaking up
Igor M. Liplianin wrote:
On 6 June 2009 23:37:47 Simon Kenyon wrote:
Igor M. Liplianin wrote:
On 5 June 2009 21:41:46 Simon Kenyon wrote:
Simon Kenyon wrote:
Simon Kenyon wrote:
the picture seems to be breaking up badly
will revert to my version and see if that fixes it
[sorry for the delay
On Sunday 14 June 2009, Hans Verkuil wrote:
> > +#define dump_reg(sd, reg, val) \
> > do {\
> > - val = tvp514x_read_reg(client, reg);\
> > - v4l_info(client, "Reg(0x%.2X): 0x
On Sunday 14 June 2009, Hans Verkuil wrote:
> > /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
>
> Huh? What's this? I only know the tlv320aic23b and that's an audio driver.
AIC33 is another audio codec chip:
http://focus.ti.com/docs/prod/folders/print/tlv320aic33.html
One can't list a
Let's begin the maintainers party.
> A board designer knows what the host supports, knows what the sensor
> supports, and knows if he added any inverters on the board, and based on
> all that information he can just setup these parameters for the sensor
> chip. Settings that are fixed on the se
On Sun, 14 Jun 2009, Hans Verkuil wrote:
> The point I'm making here is that since the autoconf part is done in software
> it *can* be changed. And while just looking at the code there is no reason why
> choosing a positive vs. negative polarity makes any difference if both host
> and i2c device s
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Sun Jun 14 19:00:03 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 11965:bff77ec33116
gcc version: gcc
On Sunday 14 June 2009 17:33:19 Guennadi Liakhovetski wrote:
> On Fri, 12 Jun 2009, Hans Verkuil wrote:
>
> > On Friday 12 June 2009 14:59:03 Guennadi Liakhovetski wrote:
> > > On Fri, 12 Jun 2009, Hans Verkuil wrote:
> > >
> > > > > 1. it is very unusual that the board designer has to mandate wh
On Sunday 14 June 2009 18:23:41 Trent Piepho wrote:
> On Sun, 14 Jun 2009, Eduardo Valentin wrote:
> > >> +/* FM Modulator class control IDs */
> > >> +#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900)
> > >> +#define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX
On Sun, 14 Jun 2009, Eduardo Valentin wrote:
> >> +/* FM Modulator class control IDs */
> >> +#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900)
> >> +#define V4L2_CID_FM_TX_CLASS ? ? ? ? ? ? ? ? (V4L2_CTRL_CLASS_FM_TX | 1)
> >> +
> >> +#define V4L2_CID_RDS_ENABLED ? ? ? ? ? ? ?
On 06/14/2009 01:48 PM, Simon Kenyon wrote:
just bought one of these on the off-chance that it might work
i did not know what chips were on the car when i bought it
but at €17 for a dual tuner dvb-t pci card i reckoned it was worth a try
i have looked at the card and it has:
the e3c EC188/EC100
On Fri, 12 Jun 2009, Hans Verkuil wrote:
> On Friday 12 June 2009 14:59:03 Guennadi Liakhovetski wrote:
> > On Fri, 12 Jun 2009, Hans Verkuil wrote:
> >
> > > > 1. it is very unusual that the board designer has to mandate what signal
> > > > polarity has to be used - only when there's additional
Hi all,
I think I've finally finished reviewing all the pending patches.
Are there any that I've missed? Or are there other postings that need my
attention?
Please let me know, otherwise I assume that I'm (finally!) up to date.
Regards,
Hans
--
Hans Verkuil - video4linux developer -
On Sunday 14 June 2009 14:44:53 Hans Verkuil wrote:
> On Sunday 14 June 2009 12:14:38 Hans Verkuil wrote:
> > On Wednesday 06 May 2009 20:31:33 hvaib...@ti.com wrote:
> > > From: Vaibhav Hiremath
> > >
> > > This patch converts TVP514x driver to sub-device framework
> > > from V4L2-int framework.
Hi André
first of all, thanks for responding :-)
> http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI#S2A
>PI to be applied, but it fails on some chunks...
yep, i tried it (maybe i did something wrong !? ) :
snip---
scheffen
On Thursday 11 June 2009 19:00:49 m-kariche...@ti.com wrote:
> From: Muralidharan Karicheri
>
> common voss module for video drivers
>
> This is a new module added for vpss library functions that are
> used for configuring vpss system module. All video drivers will
> include vpss.h header file a
On Thursday 11 June 2009 19:00:47 m-kariche...@ti.com wrote:
> From: Muralidharan Karicheri
>
> DM644x platform and board setup
>
> This adds plarform and board setup changes required to support
> vpfe capture driver on DM644x
>
> Added registration of vpss platform driver based on last comment
On Thursday 11 June 2009 19:00:46 m-kariche...@ti.com wrote:
> From: Muralidharan Karicheri
>
> DM355 platform and board setup
>
> This has platform and board setup changes to support vpfe capture
> driver for DM355 EVMs.
>
> Added registration of vpss platform driver based on last review
>
>
Hi Chris,
Christian Heidingsfelder [Heidingsfelder + Partner] wrote:
> It seems i own the two not working DVB-S Devices on linux.
> Its a TT-Connect S2 -3650 CI and a Pinnacle PCTV Dual Sat Pro PCI 4000I.
> Is there any chance to get one of them working. I use Gentoo with the
2.6.29-
> gentoo-r
On Sunday 14 June 2009 12:14:38 Hans Verkuil wrote:
> On Wednesday 06 May 2009 20:31:33 hvaib...@ti.com wrote:
> > From: Vaibhav Hiremath
> >
> > This patch converts TVP514x driver to sub-device framework
> > from V4L2-int framework.
> >
> > NOTE: Please note that this patch has not been tested
On Friday 12 June 2009 19:30:31 Eduardo Valentin wrote:
> Hello all,
>
> I'm resending the FM transmitter driver and the proposed changes in
> v4l2 api files in order to cover the fmtx extended controls class.
>
> Difference from version #6 is that now I've added added lots of comments
> made
On Sun, Jun 14, 2009 at 01:14:06PM +0200, ext Hans Verkuil wrote:
> On Friday 12 June 2009 19:30:37 Eduardo Valentin wrote:
> > This patch adds files which creates the radio interface
> > for si4713 FM transmitter (modulator) devices.
> >
> > In order to do the real access to device registers, this
On Friday 12 June 2009 19:30:37 Eduardo Valentin wrote:
> This patch adds files which creates the radio interface
> for si4713 FM transmitter (modulator) devices.
>
> In order to do the real access to device registers, this
> driver uses the v4l2 subdev interface exported by si4713 i2c driver.
>
Hi Hans,
On Sun, Jun 14, 2009 at 1:41 PM, Hans Verkuil wrote:
> On Friday 12 June 2009 19:30:36 Eduardo Valentin wrote:
>> This single patch adds documentation description for FM Modulator (FM_TX)
>> Extended Control Class and its Control IDs. The text was added under
>> "Extended Controls" sectio
Hi Hans,
On Sun, Jun 14, 2009 at 1:46 PM, Hans Verkuil wrote:
> On Friday 12 June 2009 19:30:33 Eduardo Valentin wrote:
>> This patch adds a new class of extended controls. This class
>> is intended to support FM Radio Modulators properties such as:
>> rds, audio limiters, audio compression, pilot
just bought one of these on the off-chance that it might work
i did not know what chips were on the car when i bought it
but at €17 for a dual tuner dvb-t pci card i reckoned it was worth a try
i have looked at the card and it has:
the e3c EC188/EC100 pair of pci chips
a pair of MaxLinear MxL5003
On Friday 12 June 2009 19:30:33 Eduardo Valentin wrote:
> This patch adds a new class of extended controls. This class
> is intended to support FM Radio Modulators properties such as:
> rds, audio limiters, audio compression, pilot tone generation,
> tuning power levels and preemphasis properties.
On Friday 12 June 2009 19:30:36 Eduardo Valentin wrote:
> This single patch adds documentation description for FM Modulator (FM_TX)
> Extended Control Class and its Control IDs. The text was added under
> "Extended Controls" section.
>
> Signed-off-by: Eduardo Valentin
> ---
> v4l2-spec/Makefile
-- Forwarded Message --
Subject: [linux-dvb] Fwd: TT-Connect S2 -3650 CI and Pinnacle PCTV Dual Sat
Pro PCI 4000I
Date: Sunday 14 June 2009
From: "Christian Heidingsfelder [Heidingsfelder + Partner]"
To: linux-...@linuxtv.org
First of all :
Hi to all (and especially to F
On Sunday 14 June 2009 11:50:51 Hans Verkuil wrote:
> Hi Mauro,
>
> Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-misc for the
> following:
>
> - ivtv/cx18: fix regression: class controls are no longer seen
> - v4l2-ctl: add modulator get/set options.
> - v4l2-spec: update VIDIOC_
On Wednesday 06 May 2009 20:31:33 hvaib...@ti.com wrote:
> From: Vaibhav Hiremath
>
> This patch converts TVP514x driver to sub-device framework
> from V4L2-int framework.
>
> NOTE: Please note that this patch has not been tested on any board,
> only compilation/build tested.
>
> Changes
Hi Mauro,
Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-misc for the
following:
- ivtv/cx18: fix regression: class controls are no longer seen
- v4l2-ctl: add modulator get/set options.
- v4l2-spec: update VIDIOC_G/S_MODULATOR section.
- compat: fix __fls check for the arm archite
Hi Erik,
For the latest version of the gspca ov519 driver, with all me
recent work for adding ov511 and ov518 support in it see:
http://linuxtv.org/hg/~hgoede/gspca
Regards,
Hans
On 06/13/2009 02:45 AM, Erik de Castro Lopo wrote:
Hans de Goede wrote:
This looks to me like its just ov51x-j
Hi Patrick,
The daily build reports these warnings for dib3000mc.c and dib7000p.c:
/marune/build/v4l-dvb-master/v4l/dib3000mc.c: In
function 'dib3000mc_i2c_enumeration':
/marune/build/v4l-dvb-master/v4l/dib3000mc.c:863: warning: the frame size of
1508 bytes is larger than 1024 bytes
/marune/bu
40 matches
Mail list logo
