On Tue, Feb 9, 2010 at 9:14 PM, Andy Walls awa...@radix.net wrote:
Both Ooops below are related to userspace loading of firmware for the
HVR-950Q.
Very strange. The xc5000 function doesn't appear to really do
anything unusual. It calls request_firmware(), pushes the code into
the chip, and
On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux rlem...@cooptel.qc.ca wrote:
Andy,
This is a great answer! Thanks very much. When I get into this situation
again
I will know what to look for.
A possible reason why I got into this problem in the first place is that I
tried
many
Hi Andy,
Thanks for taking the time to do some testing in your environment.
On Sun, Feb 7, 2010 at 7:10 PM, Andy Walls awa...@radix.net wrote:
My observations:
1. With the amplifier on and anti-alias filter off things looked fine.
2. With the amplifier on and anti-alias filter on things
Hello Mr. Shack,
On Mon, Feb 8, 2010 at 8:43 AM, Chicken Shack chicken.sh...@gmx.de wrote:
I vote for Andy Walls, Devin Heitmueller. There are a couple of capable
candidates here who can really do that job with a better output for the
whole Linux community.
There is ABSOLUTELY NO necessity
On Mon, Feb 8, 2010 at 11:43 PM, Richard Lemieux rlem...@cooptel.qc.ca wrote:
Hi,
I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that
activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has
run (and is no longer in use by an application) triggers
On Wed, Feb 3, 2010 at 8:51 PM, Andy Walls awa...@radix.net wrote:
With all that said, if you have a baseband Luma or Chroma signal with
strong spurious high frequency components (crappy source, or you're
overdriving the front end and getting intermods), then keep the
anti-alias filter turned
Hey Andy,
On Thu, Feb 4, 2010 at 11:15 PM, Andy Walls awa...@radix.net wrote:
Hmmm. The AGC (or static gain level?) of the amplifier in the SAA7113
before the anti-alias filter may be set too high causing the clipping
(intermods) there. It may be worth looking at the gain setting for that
On Tue, Feb 2, 2010 at 7:29 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
The better is to allow enabling/disabling the anti-alias via ctrl.
Whatever default is chosen, the driver may adjust the control default
at the board initialization, or even blocking the control when the
other mode
On Wed, Feb 3, 2010 at 3:36 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1114,7 +1122,11 @@ static int xc2028_set_params(struct
On Wed, Feb 3, 2010 at 3:40 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/staging/tm6000/hack.c
+++ b/drivers/staging/tm6000/hack.c
snip
This patch shouldn't be merged at all. You should figure out the
correct zl10353_config
On Wed, Feb 3, 2010 at 3:38 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/media/dvb/frontends/zl10353.h
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -45,6 +45,8 @@ struct zl10353_config
/* clock control registers
On Wed, Feb 3, 2010 at 3:31 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -221,12 +239,13 @@ struct usb_device_id tm6000_id_table [] = {
{
On Wed, Feb 3, 2010 at 3:50 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
Am 03.02.2010 21:25, schrieb Mauro Carvalho Chehab:
This one is a very obscure patch. What are you doing this patch and why?
Stefan Ringel wrote:
signed-off-by: Stefan Ringel stefan.rin...@arcor.de
---
Hello all,
I am doing some quality improvements for a couple of the
em28xx/saa7113 designs, and I found a pretty serious problem which
appears to have been there for some time.
In fact, the regression was introduced when the saa7115 support was
added in 2005 (hg revision 2750). This change
On Mon, Feb 1, 2010 at 2:49 PM, Arnaud Boy psyka...@gmail.com wrote:
Hi!
I've a card PINNACLE PCTV HYBRID PRO (2) with the PCI ID
0x2304:0x0226. This is work on analog mode but the em28xx module
don't register dvb interface.
I think the card could work if we uncomment the commented part in
On Mon, Feb 1, 2010 at 3:35 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
add Terratec Cinergy Hybrid XE
bugfix i2c transfer
add frontend callback
add init for tm6010
add digital-init for tm6010
add callback for analog/digital switch
bugfix usb transfer in DVB-mode
signed-off-by: Stefan
On Mon, Feb 1, 2010 at 4:23 PM, Stefan Ringel stefan.rin...@arcor.de wrote:
You should start by breaking it down into a patch series, so that the
incremental changes can be reviewed. That will allow you to explain
in the patch descriptions why all the individual changes you have made
are
On Fri, Jan 29, 2010 at 11:02 AM, David Henig dhhe...@googlemail.com wrote:
Thanks, I appear to have the headers and no longer have to do the symlink,
but still getting the same error - any help gratefully received, or do I
need to get a vanilla kernel?
Open up the file v4l/.config and change
Hi Andy,
On Thu, Jan 28, 2010 at 9:24 PM, Andy Walls awa...@radix.net wrote:
Devin,
I found interesting system interactions. On my dual core x86_64 Fedora
12 machine loading an HVR-1600 cold (no firmware has been loaded yet),
the pulseaudio daemon opens up a CX23418 ALSA node almost
On Fri, Jan 29, 2010 at 1:40 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
I doubt it would solve. IMO, having it modular is good, since you may not
need cx18 alsa on all devices.
Modularity is good, but we really need to rethink about the way we are
loading these modules (this applies to
On Fri, Jan 29, 2010 at 2:59 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
The asynchronous load were added not to improve the boot load time, but to
avoid some troubles that happens when the load is synchronous.
I don't remember what were the exact trouble, but I suspect that it was
On Wed, Jan 27, 2010 at 4:00 PM, Sebastian Spiess
sebastian.spi...@gmail.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi there,
below is my dmesh output for my Pinnacle PCTV Hybrid Pro
hope it helps
[ 8899.390876] em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870,
On Mon, Jan 25, 2010 at 11:45 AM, Theodore Kilgore
kilg...@banach.math.auburn.edu wrote:
On Mon, 25 Jan 2010, Mauro Carvalho Chehab wrote:
Hi Devin/Andy/Jean,
snip
The sq905c has a warning.
snip
drivers/media/video/gspca/sq905c.c: In function ?sd_config?:
On Mon, Jan 25, 2010 at 3:05 PM, Morten Friesgaard friesga...@gmail.com wrote:
Sound like a lot of work, and it would be easier just to buy a
functional tuner :)
Guess I'm busy enough. However, I did manage to find some more info,
for someone to use someday :)
/Morten
Model: EU 2008
USB
On Fri, Jan 22, 2010 at 11:18 AM, Morten Friesgaard
friesga...@gmail.com wrote:
Actually I don't understand why this em28xx driver is the only one
being patched, guess that reduces backward compability!? :-P
There are many drivers actively being developed. What I'm trying to
say is that the
On Fri, Jan 22, 2010 at 12:48 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
if (stv090x_i2c_gate_ctrl(fe, 1) 0)
goto err;
tuner access
if (stv090x_i2c_gate_ctrl(fe, 0) 0)
goto err;
Ok. It is very unusual to have a lock internally like the above, since
On Fri, Jan 22, 2010 at 1:23 PM, Manu Abraham abraham.m...@gmail.com wrote:
The point there is that it is a dual demod which implements a FSM for
it's tuner flow control and hence. The demodulators in the tree are
generally single/standalone and don't need such a FSM to handle that.
Even if
On Fri, Jan 22, 2010 at 2:11 PM, Manu Abraham abraham.m...@gmail.com wrote:
I think you understood incorrectly. Generally most demodulators have
an option to detect the I2C stop bit, thereby automatically disabling
the gate, while some don't. In those cases, you don't even need a
On Fri, Jan 22, 2010 at 3:22 PM, Manu Abraham abraham.m...@gmail.com wrote:
On Fri, Jan 22, 2010 at 11:40 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
Also, the dvb_frontend.c makes calls to i2c_gate_ctrl() at various
points, so you would need to ensure that none of those occur
On Fri, Jan 22, 2010 at 3:59 PM, Manu Abraham abraham.m...@gmail.com wrote:
No, rather on frontend shutdown, demodulator sleep() is called
instead. demodulator sleep() shuts down the tuner, AFAIR. This is the
original and correct behaviour for dvb frontend.
Both the tuner and frontend are
On Fri, Jan 22, 2010 at 4:32 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
There is one remaining checkpatch warning:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#45: FILE: drivers/media/video/cx18/cx18-driver.c:52:
+EXPORT_SYMBOL(cx18_ext_init);
On Fri, Jan 22, 2010 at 4:55 PM, Mauro Carvalho Chehab
mauroche...@gmail.com wrote:
Ah, I forgot to mention: if you're interested on seeing the commits, you
need to subscribe linuxtv-comm...@linuxtv.org. In addition to the -hg
commits that were available there since the beginning of the -hg
On Fri, Jan 22, 2010 at 5:03 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
I'm actually on linuxtv-commits, but I didn't get any of the
notifications. Am I missing something?
Nevermind. I didn't see your note about the first few having been missed.
Cheers,
Devin
--
Devin J
On Wed, Jan 20, 2010 at 12:26 PM, Morten Friesgaard
friesga...@gmail.com wrote:
Hello.
I installed mythbuntu 9.10 this week on some old hardware, I had a
Hauppauge 500MCE PVR in and made it work fairly easy. I'm used to
gentoo
However, I want to record HD signal, so I plugged in a Eyetv
Hello Mauro,
I find it somewhat unfortunate that this is labeled ANNOUNCE instead
of RFC. It shows how little you care about soliciting the opinions
of the other developers. Rather than making a proposal for how the
process can be improved and soliciting feedback, you have chosen to
decide for
On Tue, Jan 19, 2010 at 9:20 PM, Roel Kluin roel.kl...@gmail.com wrote:
Regardless of the state-Mode in both cases the same value was
written.
If state-Mode wasn't set, it is always 0.
Signed-off-by: Roel Kluin roel.kl...@gmail.com
---
drivers/media/common/tuners/mxl5005s.c | 7 +++
On Mon, Jan 18, 2010 at 10:01 AM, Valerio Bontempi
valerio.bonte...@gmail.com wrote:
Hi all,
I am still having problem using v4l-dvb drivers with Terratec Cinergy T USB
XS.
As reported in first mail, I am using the last version of v4l-dvb
drivers with few lines adjustment in order to make
On Mon, Jan 18, 2010 at 10:31 AM, Stefan Ringel stefan.rin...@arcor.de wrote:
I have a question. How are loaded the base firmware into xc3028, in
once or in a split ? It's importent for TM6010, the USB-Analyzer said
that it load it in once and then send a quitting reqeuest.
In most drivers,
On Mon, Jan 18, 2010 at 11:03 AM, Adriano Gigante adrig...@yahoo.it wrote:
Hi Devin,
The 0ccd:0043 is on my todo list of devices to work on (they sent me a
sample board), although it's not the highest priority on my list given
how old it is.
Did they sent you also a 0ccd:0072 card
On Mon, Jan 18, 2010 at 11:11 AM, Ismo Kuhmonen ismo...@gmail.com wrote:
Hi
Why my Pinnacle DVB-T 73€ USB not working?
Are you running the current v4l-dvb tree? Support for the 73e was
introduced into the v4l-dvb tree on September 2nd, so the changes
probably haven't gotten into whatever
Hello Markus,
On Mon, Jan 18, 2010 at 11:29 AM, Markus Rechberger
mrechber...@gmail.com wrote:
Just fyi there's a hardware bug with the 0072/terratec hybrid xs fm
(cx25843 - xc5000):
http://img91.imageshack.us/i/0004qf8.png/
http://img104.imageshack.us/i/0009cp4.png/
nothing that
Hello Mauro,
Please PULL from
http://kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-3 for the
following:
cx18-alsa: Fix the rates definition and move some buffer freeing code.
cx18: address possible passing of NULL to snd_card_free
cx18-alsa: codingstyle cleanup
cx18-alsa: codingstyle cleanup
Hello Mauro,
Please PULL from
http://kernellabs.com/hg/~dheitmueller/xc3028-regression for the
following:
xc3028: fix regression in firmware loading time
This is a fix for a regression you introduced into the tuner-xc2028
driver in rev 12824.
Devin
--
Devin J. Heitmueller - Kernel Labs
On Sun, Jan 17, 2010 at 5:18 AM, Patrick Boettcher
pboettc...@kernellabs.com wrote:
The 74e is not a dib0700-based device, my assumption at that time was wrong.
For the 74e afaik, there is no LinuxTV driver right now. (IIRC it is a Abilis
based design)
Patrick is correct in that the 74e is an
On Sun, Jan 17, 2010 at 2:05 AM, Franklin Meng fmeng2...@yahoo.com wrote:
I retested my device and tried several different GPIO sequences but so far
every time I change between the Analog and digital interface, the SAA7113
needs to be reinitialized. I tried leaving both the digital and
On Fri, Jan 15, 2010 at 3:00 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
I've tried to tactfully point this out in the past, but PLEASE STOP
USING THE TRUNK AS YOUR PERSONAL DEVELOPMENT SANDBOX. These changes
should have gone into a branch, and you should have solicited testers
for
On Fri, Jan 15, 2010 at 6:00 PM, Oliver Endriss o.endr...@gmx.de wrote:
I believe your assumption is incorrect. I believe the enumeration
order is not deterministic even for multiple instances of the same
driver. It is not uncommon to hear mythtv users complain that I have
two PVR-150 cards
On Thu, Jan 14, 2010 at 10:35 AM, Andreas Besse be...@motama.com wrote:
if a system contains multiple DVB cards of the same type, how is the
order of devices determined by the driver/kernel?
I use 2 Technotrend S2-3200 cards in a system and observerd that if I
load the driver driver budget_ci
On Thu, Jan 14, 2010 at 11:01 AM, Andreas Besse be...@motama.com wrote:
yes if there are different drivers I already observed the behaviour that
the ordering gets flipped after reboot.
But if I assume, that there is only *one* driver that is loaded (e.g.
budget_av) for all dvb cards in the
On Thu, Jan 14, 2010 at 1:54 PM, Franklin Meng fmeng2...@yahoo.com wrote:
Unfortunately, I do not know the difference. I thought it might be to do
something to the tuner but I am not quite sure. If I remember correctly, the
traces that I obtained also showed a difference between the analog
On Thu, Jan 14, 2010 at 5:00 PM, CityK ci...@rogers.com wrote:
Franklin Meng wrote:
As far as I can tell, the Kworld 315U is the only board that uses this
combination of parts.. Thomson tuner, LG demod, and SAA7113. I don't think
any other device has used the SAA7113 together with a
On Wed, Jan 13, 2010 at 3:32 AM, xof x...@skynet.be wrote:
Are you sure? (it is an Ubuntu-only issue)
I can see several
#include asm/asm.h
in the v4l tree that compile fine on Ubuntu
but only linux/drivers/media/dvb/firewire/firedtv-1394.c contains
#include asm.h
and doesn't compile.
On Wed, Jan 13, 2010 at 9:00 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Michael Krufky wrote:
The same tree is also available using http instead of https:
http://www.kernellabs.com/hg/~dheitmueller/em28xx-pal-vbi-2
This should work for you without issue.
Ok. Applied, thanks!
On Sat, Jan 9, 2010 at 2:30 PM, Franklin Meng fmeng2...@yahoo.com wrote:
I tweaked the GPIO's a bit more for the Kworld 315U and switching between
analog and digital signals is more reliable now. Attached is an updated diff.
Hello Franklin,
This is pretty good stuff. A few
On Tue, Jan 12, 2010 at 4:26 PM, Hagen von Eitzen ha...@von-eitzen.de wrote:
Dear all,
as suggested by http://www.linuxtv.org/wiki/index.php/Bug_Report I report
several warnings and errors not yet covered in latest
http://www.xs4all.nl/~hverkuil/logs/Monday.log I get when compiling.
(The
Hello Mauro,
Please PULL from http://www.kernellabs.com/hg/~dheitmueller/dib0700_ir
for the following:
dib0700: rework IR logic for firmware 1.20
You had mentioned that you intended to do some porting of the dib0700
to use your new backend, so please do me a favor and merge this
*before* you
On Sun, Jan 10, 2010 at 7:33 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Hi Devin,
Unfortunately, I got some merge conflicts with cx18 code from Andy, due to
the buffer handling changes. Could you please rebase your tree against tip,
solving those conflicts?
Sure, I'll try to do
On Sun, Jan 10, 2010 at 2:49 AM, Francesco Lavra
francescola...@interfree.it wrote:
Yes, the IR core is broken, a patch has been submitted by myself some
time ago (http://patchwork.kernel.org/patch/70126/), but hasn't made it
to v4l-dvb yet.
Thanks for the heads up. I actually didn't see that
On Fri, Jan 8, 2010 at 8:55 PM, Ralph Siemsen ral...@netwinder.org wrote:
Now the driver loads, and I follow it up with modprobe tuner.
Unfortunately, no luck yet using tvtime, it just reports:
videoinput: No inputs available on video4linux2 device '/dev/video0'.
But I suspect that is a
On Thu, Jan 7, 2010 at 2:49 PM, istva...@mailbox.hu istva...@mailbox.hu wrote:
On 01/05/2010 02:25 AM, Raena Lea-Shannon wrote:
Thanks. Will try again later.
By the way, for those who would like to test it, here is a patch based
on Devin Heitmueller's XC4000 driver and Mirek Slugen's older
On Wed, Jan 6, 2010 at 5:00 AM, Harald Gustafsson hgu1...@gmail.com wrote:
Hi,
Thanks for working on improving the Nova T 500 performance, it is much
appreciated, and let me know if you need further help with debugging it.
I tried your dib0700-ir tree. My problems with the Nova T 500 and the
On Tue, Jan 5, 2010 at 3:40 AM, Michael Rüttgers
i...@michael-ruettgers.de wrote:
Hello,
a year ago I bought a device named Hama Video Editor, which was not
(and is not yet) supported by the em28xx driver.
So I played around with the card parameter and got the device basically
working with
Mauro,
Please PULL from
http://www.kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-2 for the
following:
cx18-alsa: Fix the rates definition and move some buffer freeing code.
cx18: address possible passing of NULL to snd_card_free
cx18-alsa: codingstyle cleanup
cx18-alsa: codingstyle cleanup
cx18:
On Tue, Jan 5, 2010 at 12:50 PM, Franz Fürbaß franz.fuerb...@chello.at wrote:
Hello,
[1] . Can't scan for DVB-T channels with Hauppauge HVR 4000 HD.
[2] Got a scan problem with the Hauppauge HVR 4000 HD card.
If I try to scan for channels with the DVB-T frontend
On Tue, Jan 5, 2010 at 6:37 PM, Franz Fürbaß franz.fuerb...@chello.at wrote:
Ok, seems to work. I put an usleep(500); between close and open.
I will try to apply this to MythTV and w_scan as well.
You can certainly try that with w_scan and MythTV to see if it
improves your situation.
Hello All,
If there are any users who have been waiting for the PCTV 340e to be
supported, there is now a tree available for testing:
http://kernellabs.com/hg/~dheitmueller/pctv-340e-2
Comments welcome. More info can be found here:
http://www.kernellabs.com/blog/?p=1247
Cheers,
Devin
--
On Tue, Dec 22, 2009 at 5:34 AM, Mauro Carvalho Chehab
Provided that you've fixed the points that Takashi rised about the alsa
part, I'm fine. Please send a separate pull request c/c him , in order
to allow him to send his ack.
Ok. With the holidays upon us and my being out of town, I will
On Tue, Dec 22, 2009 at 10:11 AM, Valerio Bontempi
valerio.bonte...@gmail.com wrote:
Before the update, v4l-dvb driver worked fine, and now it doesn't work
even if I remove the updated packages.
Checking for kernel modules conflict, I found only the modules
installed by v4l-dvb sources.
#find
On Sun, Dec 20, 2009 at 6:40 PM, Pedro Ribeiro ped...@gmail.com wrote:
Damn, I suspected that.
Anyway, I'm having trouble viewing analog TV. I can scan and watch
channels fine, but there is no audio, and I don't know how to
configure it. If you could help me, I would really appreciate it
On Mon, Dec 21, 2009 at 12:21 PM, Takashi Iwai ti...@suse.de wrote:
Just a very quick look through the files, here are some comments:
- snd_card_free() can't be called with NULL, but the error path in
snd_cx18_init() may reach that (when snd_card_create() returns an
error).
- Specifying
On Mon, Dec 21, 2009 at 3:09 PM, Robert Longfield
robert.longfi...@gmail.com wrote:
Well it gets even better.
So on the weekend I was able to steal a few minutes to properly
trouble shoot the issue now that I know it was in the mythbuntu box.
As a long shot I pulled out the Promise Tech
On Mon, Dec 21, 2009 at 10:24 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
In the case of this patch series, the complains are not related to 80 cols:
snip
In this case, there was a mix of 80-column issues, as well as some
other issues. I did fix the issues other than the 80-column
On Sun, Dec 20, 2009 at 12:07 PM, Pedro Ribeiro ped...@gmail.com wrote:
Hello all,
I'm having trouble setting up DVB for my Pinnacle PCTV Hybrid Stick
(2), AKA 330e.
You can check the linux-media archives for more info, but I can tell
you that the 330e is not currently supported for DVB mode
On Mon, Dec 14, 2009 at 11:19 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Em Mon, 14 Dec 2009 11:10:50 -0500
Devin Heitmueller dheitmuel...@kernellabs.com escreveu:
On Mon, Dec 14, 2009 at 11:09 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
I can't pull. Your site
Hello Mauro,
Please PULL from
https://www.kernellabs.com/hg/~dheitmueller/em28xx-pal-vbi-2 for the
following:
em28xx: add PAL support for VBI
This basically just goes back and fixes up the VBI support so that it
is no longer NTSC specific (fixing constants and properly setting up
the VBI region
On Sun, Dec 20, 2009 at 10:28 PM, Andy Walls awa...@radix.net wrote:
Hmmm on the current v4l-dvb tree, the command
$ v4l/scripts/checkpatch.pl --no-tree --strict \
-f linux/drivers/media/video/cx18/cx18-driver.c
yields warnings about pre-existing 80 column lines and
On Fri, Dec 18, 2009 at 9:05 AM, Paulo Assis pj.as...@gmail.com wrote:
Hi,
I'm currently porting the GPL linux-avc2210k driver (
http://www.freelists.org/archive/linux-avc2210k/ ) to V4L2.
The current version has it's own API that makes it incompatible with
any software except for specific
On Mon, Dec 14, 2009 at 11:09 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
I can't pull. Your site is not responding.
Hmm... it seems a temporary failure. It is working now.
That is strange (works fine from here). You reported a similar issue
trying to pull one of Michael Krufky's
On Mon, Dec 14, 2009 at 11:19 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Em Mon, 14 Dec 2009 11:10:50 -0500
Devin Heitmueller dheitmuel...@kernellabs.com escreveu:
On Mon, Dec 14, 2009 at 11:09 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
I can't pull. Your site
On Sat, Dec 12, 2009 at 5:34 PM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Hi Devin,
It is better to submit the RFC patches to alsa ML for they to take a look.
Cheers,
Mauro
Is there something specific you want the ALSA people to review? There
are no changes to the ALSA core and
, {0xad, 0xad} },
{0x060d, {0x70, 0xf0} },
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Acked-by: Devin Heitmueller dheitmuel
Hello Mauro,
Please pull from
http://www.kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-2 for the
following:
cx18-alsa: fix memory leak in error condition
cx18-alsa: remove a couple of warnings
cx18-alsa: name alsa device after the actual card
cx18: cleanup cx18-alsa debug logging
cx18: rework
On Thu, Dec 10, 2009 at 1:28 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Hi David,
Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-firmware.git
master
For dib0700 firmware.
Mauro,
I had David pull in this firmware months ago (so it could be
On Thu, Dec 10, 2009 at 2:21 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Devin
Hmm... sorry, it seems I missed your pull request.
I'll need to re-check my git update script here... I should have been able to
notice it.
Because of the timeliness for Karmic (they actually moved it
Hello John,
On Thu, Dec 10, 2009 at 8:38 PM, John S Gruber johnsgru...@gmail.com wrote:
I think you found something in the specification I haven't found. What did you
see that indicated how to deal with equipment misbehaving in this way?
I'm referring to section 2.3.2.3 of Universal Serial Bus
On Wed, Dec 9, 2009 at 12:14 PM, Valerio Bontempi
Hi Paulo,
no luck with your suggestion, I have no errors compiling and
installing the drivers but after rebooting it is not working at all.
Modprobe em28xx produces the same error already sent in the previous mail
You're seeing an error when
On Wed, Dec 9, 2009 at 12:49 PM, Valerio Bontempi
Hi Devin
attached you find the output.log requested
Thanks a lot
Ah, there is your problem. You have updates installed, presumably by
your distro.
/lib/modules/2.6.31.5-0.1-desktop/updates/kernel/drivers/media/video/em28xx
On Wed, Dec 9, 2009 at 1:21 PM, Valerio Bontempi
I don't know how it is happened, because I followed the normal way to
compile v4l-dvb, so it seems a very strange behaviour...
however, how can I solve, cleaning out all the in-kernel modules and
all the modules I need to remove?
Well, the
On Tue, Dec 8, 2009 at 12:35 PM, Rob Beard r...@esdelle.co.uk wrote:
Hi folks,
I've borrowed a WinTV HVR-900 USB stick from a friend of mine to see if I
can get any reception in my area before forking out for one however I've run
in to a couple of problems and wondered if anyone had used one
On Fri, Dec 4, 2009 at 6:26 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
On Fri, Dec 4, 2009 at 5:15 PM, John S Gruber johnsgru...@gmail.com wrote:
Addressing audio quality problem.
In sound/usb/usbaudio.c, for the Hauppage HVR-950Q only, change
retire_capture_urb to copy
On Fri, Dec 4, 2009 at 9:31 AM, John S Gruber johnsgru...@gmail.com wrote:
I produced the dump of URB sizes you requested by adding that printk() line.
The
results are at http://pastebin.com/f26f29133
Hi John,
This is good info (especially since you have kernel timestamps enabled).
Did you
On Fri, Dec 4, 2009 at 5:15 PM, John S Gruber johnsgru...@gmail.com wrote:
Addressing audio quality problem.
In sound/usb/usbaudio.c, for the Hauppage HVR-950Q only, change
retire_capture_urb to copy the entire byte stream while still counting
entire audio frames. urbs unaligned on channel
On Thu, Dec 3, 2009 at 4:47 PM, Bert Massop bert.mas...@gmail.com wrote:
Hi Jan,
The datasheet for the TDA18218 can be obtained from NXP:
http://www.nxp.com/documents/data_sheet/TDA18218HN.pdf
That's all the information I have at the moment, maybe Mike has some
other information (like the
On Thu, Dec 3, 2009 at 11:00 PM, John S Gruber johnsgru...@gmail.com wrote:
I have problems with my audio that I've tracked down to the transfer
of audio from the au0828
in my hvr-950Q. I spotted the following comment about green screen
detection and I wonder
if it might be related.
On Thu, Dec 3, 2009 at 11:21 PM, Devin Heitmueller
dheitmuel...@kernellabs.com wrote:
On Thu, Dec 3, 2009 at 11:00 PM, John S Gruber johnsgru...@gmail.com wrote:
I have problems with my audio that I've tracked down to the transfer
of audio from the au0828
in my hvr-950Q. I spotted
On Tue, Dec 1, 2009 at 4:18 AM, Vincent McIntyre
vincent.mcint...@gmail.com wrote:
Hi Rob
I missed your followup and tested the 'revert.diff' patch, attached
for reference.
I have been slow replying because I've been scratching my head over the
results.
I used 'signaltest.pl' to test[1],
On Tue, Dec 1, 2009 at 12:03 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Just taking an example from the dibcom0700 driver (as the same driver
supports several different RC5 and NEC codes at the same time),
the kernel table has several keycodes added there, all working
at the same
On Mon, Nov 30, 2009 at 12:28 PM, Patrick Boettcher
- Add support for PCTV 74e (Pinnacle) + fix USB vendor IDs
Patrick,
You added the USB ID for the 74e? Is that the result of actually
trying it with the hardware? As far as I know, the 74e is not a
Dibcom design.
Devin
--
Devin J.
On Tue, Nov 24, 2009 at 6:39 PM, Andy Walls awa...@radix.net wrote:
BTW, I did a quick skim of your cx18-alsa stuff. I noticed two things:
1. A memory leak in an error path:
http://www.kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-2/rev/cb267593943f#l85
2. Technically open_id should
On Wed, Nov 25, 2009 at 1:07 PM, Jarod Wilson ja...@wilsonet.com wrote:
Took me a minute to figure out exactly what you were talking about. You're
referring to the current in-kernel decoding done on an ad-hoc basis for
assorted remotes bundled with capture devices, correct?
Admittedly,
801 - 900 of 1306 matches
Mail list logo
