Re: Hauppage WinTV-HVR-900H
Mauro Carvalho Chehab wrote: have it implemented). This is the case of xc3028, so you'll need to turn off signal detection while tuning, and be sure that you're loading the proper frequency table used on your Country. It should be noticed that several tuner drivers don't have signal detection (or not This is what i'm doing actually, i have signal detection disabled in tvtime+of course the proper frequency for my country, but still i get channels with very bad pictures (not watchable) with my USB sticks, but i get all the channels with a very good pictures with my PCI card (with signal detection enabled), and using the same analog cable+same setup+same kernel version. Cheers, Mauro Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Fri, Oct 9, 2009 at 1:22 PM, Ali Abdallah wrote: Screenshots here for TV and S-Video input configuration with TV time. http://ali.blogsite.org/files/tvtime/ Could you try the S-Video or composite input and see if the picture quality is still bad (as this well help isolate whether it's a problem with the tuner chip or the decoder. Same picture quality with S-Video, but with composite there is no picture. Ok, this helps alot. This rules out the tuner and suggests that perhaps the video decoder is not being programmed properly. Could you please send me the output of "dmesg"? I'll see about setting up a tree with some additional debugging for you to try out. Follow up, i manager to get the hvr 900 instead the 900H, and i got the same result with the analog signal, i tried with my friend's windows system, same result, no analog channels detected, however i got all the channels a hvr pci card, so i expect these USB keys needs really a very strong signal, so there is no problem in the driver, sorry for the noise, hopefully the 900H will get a driver soon. Thanks, Devin Thanks, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Fri, Oct 9, 2009 at 1:22 PM, Ali Abdallah wrote: Screenshots here for TV and S-Video input configuration with TV time. http://ali.blogsite.org/files/tvtime/ Could you try the S-Video or composite input and see if the picture quality is still bad (as this well help isolate whether it's a problem with the tuner chip or the decoder. Same picture quality with S-Video, but with composite there is no picture. Ok, this helps alot. This rules out the tuner and suggests that perhaps the video decoder is not being programmed properly. Could you please send me the output of "dmesg"? usb 1-1: new high speed USB device using ehci_hcd and address 15 usb 1-1: configuration #1 chosen from 1 choice em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20 em28xx #0: EEPROM info: em28xx #0:AC97 audio (5 sample rates) em28xx #0:USB Remote wakeup capable em28xx #0:500mA max power em28xx #0:Table at 0x04, strings=0x206a, 0x006a, 0x em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) em28xx #0: Your board has no unique USB ID. em28xx #0: A hint were successfully done, based on eeprom hash. em28xx #0: This method is not 100% failproof. em28xx #0: If the board were missdetected, please email this log to: em28xx #0: V4L Mailing List em28xx #0: Board detected as Pinnacle Hybrid Pro tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) tuner 1-0061: chip found @ 0xc2 (em28xx #0) xc2028 1-0061: creating new instance xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner usb 1-1: firmware: requesting xc3028-v27.fw xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 1-0061: Loading firmware for type=BASE (1), id . xc2028 1-0061: Loading firmware for type=(0), id b700. SCODE (2000), id b700: xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 8000. em28xx #0: Config register raw data: 0x58 em28xx #0: AC97 vendor ID = 0x em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 1-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as /dev/video0 em28xx #0: V4L2 VBI device registered as /dev/vbi0 xc2028 1-0061: attaching existing instance xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner em28xx #0/2: xc3028 attached DVB: registering new adapter (em28xx #0) DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Successfully loaded em28xx-dvb tvp5150 1-005c: tvp5150am1 detected. tvp5150 1-005c: tvp5150am1 detected. tvp5150 1-005c: tvp5150am1 detected. xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id . (0), id 00ff: xc2028 1-0061: Loading firmware for type=(0), id 0020. xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0020. tvp5150 1-005c: tvp5150am1 detected. xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id . (0), id 00ff: xc2028 1-0061: Loading firmware for type=(0), id 0020. xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0020. I'll see about setting up a tree with some additional debugging for you to try out. Okay i'm ready to try it out. Thanks, Devin Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Fri, Oct 9, 2009 at 5:34 AM, Ali Abdallah wrote: Okay, i installed the latest drivers+the firmware of the device using extract_xc3028.pl, the device seems to be detected now, i can detect all the analog TV of my cable using tvtime, but manually, i mean i had to disable signal detection when scanning, otherwise i got no results, since the picture quality is terrible. Of course i'm sure that all the connections (cable to antenna, cable to the usb stick, ...) are correct, since it works with my old PC equipped with a PCI TV card. Any advice, what could be the problem? firmware? since you said (you added support for this device) should i open a bug report? is this device reported as working by other users? Please help if possible, almost two weeks with no real success. Could you please provide a screen shot of the tvtime output? Screenshots here for TV and S-Video input configuration with TV time. http://ali.blogsite.org/files/tvtime/ Could you try the S-Video or composite input and see if the picture quality is still bad (as this well help isolate whether it's a problem with the tuner chip or the decoder. Same picture quality with S-Video, but with composite there is no picture. Many thanks. Devin Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Fri, Oct 9, 2009 at 5:34 AM, Ali Abdallah wrote: Okay, i installed the latest drivers+the firmware of the device using extract_xc3028.pl, the device seems to be detected now, i can detect all the analog TV of my cable using tvtime, but manually, i mean i had to disable signal detection when scanning, otherwise i got no results, since the picture quality is terrible. Of course i'm sure that all the connections (cable to antenna, cable to the usb stick, ...) are correct, since it works with my old PC equipped with a PCI TV card. Any advice, what could be the problem? firmware? since you said (you added support for this device) should i open a bug report? is this device reported as working by other users? Please help if possible, almost two weeks with no real success. Could you please provide a screen shot of the tvtime output? I will provide you a screenshot when i go back home this evening. Also, are you trying to capture over-the-air or are you capturing cable television? It is a cable but at the end it is connected to main antenna of the building. What analog standard are you using? PAL-BG? SECAM. Did you make sure to tell tvtime which analog standard you are using? Yes i'm sure, settings are SECAM, area France. Could you try the S-Video or composite input and see if the picture quality is still bad (as this well help isolate whether it's a problem with the tuner chip or the decoder. I will also try these at reply this evening. Devin Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Thu, Oct 8, 2009 at 2:20 PM, Ali Abdallah wrote: I have the card since alsmost 3 years, it never worked, but now i'm in urgent need of getting an analog usb stick to work with Linux. The PCTV hybrid: Bus 001 Device 004: ID eb1a:2881 eMPIA Technology, Inc. Thanks for you support, but i need an analog usb stick, well hopefully the wintv 900H will get supported soon. Well, I added support for that device last month, so I would suggest you install the latest v4l-dvb code from http://linuxtv.org/hg/v4l-dvb. Directions can be found here: http://linuxtv.org/repo Okay, i installed the latest drivers+the firmware of the device using extract_xc3028.pl, the device seems to be detected now, i can detect all the analog TV of my cable using tvtime, but manually, i mean i had to disable signal detection when scanning, otherwise i got no results, since the picture quality is terrible. Of course i'm sure that all the connections (cable to antenna, cable to the usb stick, ...) are correct, since it works with my old PC equipped with a PCI TV card. Any advice, what could be the problem? firmware? since you said (you added support for this device) should i open a bug report? is this device reported as working by other users? Please help if possible, almost two weeks with no real success. Cheers, Devin Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Thu, Oct 8, 2009 at 2:20 PM, Ali Abdallah wrote: I have the card since alsmost 3 years, it never worked, but now i'm in urgent need of getting an analog usb stick to work with Linux. The PCTV hybrid: Bus 001 Device 004: ID eb1a:2881 eMPIA Technology, Inc. Thanks for you support, but i need an analog usb stick, well hopefully the wintv 900H will get supported soon. Well, I added support for that device last month, so I would suggest you install the latest v4l-dvb code from http://linuxtv.org/hg/v4l-dvb. Directions can be found here: http://linuxtv.org/repo Analog part also? Cheers, Devin Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Devin Heitmueller wrote: On Thu, Oct 8, 2009 at 11:01 AM, Ali Abdallah wrote: If you're interested in helping the driver development, then take a look at the related mailing list posts. Otherwise, you might be better off choosing a different product. On the other hand, I think there's been some recent progress on the PCTV hybrid pro -- Devin Heitmueller has been doing a lot of work on those products lately. For more information, see http://kernellabs.com That's a good new, i can still get that card, probably i can help testing the driver. It depends on what your needs are and whether you already own the device. If you own an older version of the board already, it may or may not work depending on which board you ended up with (if you send the USB ID, I can tell you the status in terms of support). If you haven't bought it yet, then the currently shipping version of this product is not supported (I'm actively working on the support). Also, even once I have added the support, it will only be for the digital part of the card, with no plans at this time to do the analog support. I have the card since alsmost 3 years, it never worked, but now i'm in urgent need of getting an analog usb stick to work with Linux. The PCTV hybrid: Bus 001 Device 004: ID eb1a:2881 eMPIA Technology, Inc. Thanks for you support, but i need an analog usb stick, well hopefully the wintv 900H will get supported soon. Cheers, Devin Cheers, Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Hauppage WinTV-HVR-900H
Michael Krufky wrote: On Thu, Oct 8, 2009 at 10:33 AM, Ali Abdallah wrote: Hi, Very unlucky, i bought a pinnacle hybrid pro and couldn't get it to work with linux, then i gave it up, and i found that HVR-900 card works well under linux, i got one, but i didn't know that the company is referring now for 900 same as 900H. 900H doesn't work under Linux, is there is way to get this card working? googling i didn't find much information, all i found is work under way to get this card supported (2008). Please help, Mauro was working on this driver some time ago... There is a current thread about the tm6010 on the mailing list now, but I have not read up on it. Last I heard, progress on the driver has been minimal. I saw the thread, but no news since quite some time, and trust me, searching on the internet it seems a lot of people are getting the 900H instead of the 900, it is the hauppage fault here. Almost all other Hauppauge products have relatively decent linux support -- you were unlucky and picked the one usb stick that will probably not be fully functional for a while. That's why i got hauppauge card, but well it was the 900H one. If you're interested in helping the driver development, then take a look at the related mailing list posts. Otherwise, you might be better off choosing a different product. On the other hand, I think there's been some recent progress on the PCTV hybrid pro -- Devin Heitmueller has been doing a lot of work on those products lately. For more information, see http://kernellabs.com That's a good new, i can still get that card, probably i can help testing the driver. Are you specifically looking for a hybrid analog / digital usb stick? ...or is digital-only good enough for your purposes? Yeah, i need to get an analog USB stick to work under Linux, because i replaced my desktop with a small imax mini (which i got the windows refund for it) but it is a very small PC that doesn't have PCI card. So basically if i can get the analog part of the PCTV hybrid pro or the Win TV hvr900h to work under Linux that will be awesome. -Mike Thanks for your quick reply. Ali. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hauppage WinTV-HVR-900H
Hi, Very unlucky, i bought a pinnacle hybrid pro and couldn't get it to work with linux, then i gave it up, and i found that HVR-900 card works well under linux, i got one, but i didn't know that the company is referring now for 900 same as 900H. 900H doesn't work under Linux, is there is way to get this card working? googling i didn't find much information, all i found is work under way to get this card supported (2008). Please help, . -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html