Hi Philipp,
it now works properly.
On 12 September 2012 17:02, Philipp Zabel p.za...@pengutronix.de wrote:
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
Changes since v4:
- Fix menu_skip_mask for V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE v4l2_ctrl.
Tested-by: Javier Martin
On 12 September 2012 17:02, Philipp Zabel p.za...@pengutronix.de wrote:
This fixes a failure in vb2_qbuf in user pointer mode where
__qbuf_userptr checks if the buffer queued by userspace is large
enough. The failure would happen if coda_queue_setup was called
with empty fmt (and thus set the
Hi Philipp,
On 12 September 2012 17:02, Philipp Zabel p.za...@pengutronix.de wrote:
These patches contain initial firmware loading and encoding support for the
CODA7 series VPU contained in i.MX51 and i.MX53 SoCs, and fix some
multi-instance
issues.
Changes since v4:
- Added Javier's
If you want to speed up the process and you have you could send a pull
request to Mauro.
But be careful with the following patches that have been sent to the
list after the initial support of the driver and before these series:
http://patchwork.linuxtv.org/patch/14048/
Hi,
our new i.MX27 based platform (Visstrim-SM20) uses an ov7675 sensor
attached to the CSI interface. Apparently, this sensor is fully
compatible with the old ov7670. For this reason, it seems rather
sensible that they should share the same driver: ov7670.c
One of the challenges we have to face
On Thu 13 September 2012 11:48:17 javier Martin wrote:
Hi,
our new i.MX27 based platform (Visstrim-SM20) uses an ov7675 sensor
attached to the CSI interface. Apparently, this sensor is fully
compatible with the old ov7670. For this reason, it seems rather
sensible that they should share the
Hi Francesco
On 12 September 2012 19:07, Francesco Lavra francescolavra...@gmail.com wrote:
Hi Sangwook,
two remarks from my review on September 9th haven't been addressed.
Thanks for the review.
I missed those, please let me correct them and send patch again.
Regards
Sangwook
I believe
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:24 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
These will be used by v4l2-dev.c to improve ioctl checking.
I.e. ioctls for capture should return -ENOTTY when called for
an output device.
Signed-off-by:
On Friday 07 September 2012 15:29:12 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Add a new flag that tells userspace that the monotonic clock is used
for timestamps and update the documentation accordingly.
We decided on this new flag during the 2012 Media Workshop.
Hi Hans,
On Friday 07 September 2012 15:29:13 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Add the new V4L2_CAP_MONOTONIC_TS capability to those drivers that
use monotomic timestamps instead of the system time.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
For
Hi Sascha,
On Tuesday 04 September 2012 11:24:46 Sascha Hauer wrote:
Hi Laurent,
On Fri, Aug 17, 2012 at 02:49:39AM +0200, Laurent Pinchart wrote:
+/**
+ * panel_get_modes - Get video modes supported by the panel
+ * @panel: The panel
+ * @modes: Pointer to an array of modes
+ *
+
On Friday 07 September 2012 15:29:03 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Specify that STREAMON/OFF should return 0 if the stream is already
started/stopped.
The spec never specified what the correct behavior is. This ambiguity
was resolved during the 2012 Media
Hi Sakari,
On Sunday 09 September 2012 10:40:17 Sakari Ailus wrote:
On Sat, Sep 08, 2012 at 01:11:04PM +0200, Hans Verkuil wrote:
On Fri September 7 2012 20:20:51 Sakari Ailus wrote:
Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
add V4L2_CID_TEST_PATTERN of
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:10 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
The 'custom' timings are no longer just for custom timings, but also for
standard CEA/VESA timings. So rename to V4L2_IN/OUT_CAP_DV_TIMINGS.
The old define is
Hi Hans,
On Wednesday 05 September 2012 10:28:30 Hans Verkuil wrote:
On Wed 5 September 2012 10:04:41 Jun Nie wrote:
Is there any summary for this summit or presentation material? I am
looking forward for some idea on CEC. It is really complex in
functionality.
Maybe other guys is
Hi Sakari,
On Friday 07 September 2012 21:46:44 Sakari Ailus wrote:
Could you replace the above with this text (with appropriate indentation
etc.) while keeping the reference to Wikipedia?
--8--
Differential pulse-code modulation (DPCM) compression can be used to
compress the
Hi Prabhakar,
Thanks for the patch.
On Tuesday 11 September 2012 19:53:38 Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
Add a helper function to modify the menu, max and default value
to set.
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
Signed-off-by: Manjunath
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:05 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
During the 2012 Media Workshop it was decided that bus_info as returned
by VIDIOC_QUERYCAP can no longer be empty. It should be a unique identifier,
and empty
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:06 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
This buffer type isn't used at all, and since it is effectively undefined
what it should do it is deprecated. The define still exists, but any
internal support
On Friday 07 September 2012 15:29:04 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
- S/TRY_FMT should always succeed, unless an invalid type field is passed
in. - TRY_FMT should give the same result as S_FMT, all other things being
equal. - ENUMFMT may return different
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:25 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/pci/ivtv/ivtv-streams.c |3 +++
drivers/media/pci/zoran/zoran_card.c
Hi Wanlong,
Thanks for the patch.
On Monday 27 August 2012 15:23:15 Wanlong Gao wrote:
At commit 07d106d0, Linus pointed out that ENOIOCTLCMD should be
translated as ENOTTY to user mode.
Cc: Laurent Pinchart laurent.pinch...@ideasonboard.com
Cc: Mauro Carvalho Chehab mche...@infradead.org
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:14 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
It was not entirely obvious that the sequence count should also
be set for output devices. Also made it more explicit that this
sequence counter counts frames,
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:15 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
While the documentation says that VIDIOC_CROPCAP is compulsory for
all video capture and output devices, in practice VIDIOC_CROPCAP is
only implemented for
On 09/13/2012 12:03 PM, Laurent Pinchart wrote:
Hi Wanlong,
Thanks for the patch.
On Monday 27 August 2012 15:23:15 Wanlong Gao wrote:
At commit 07d106d0, Linus pointed out that ENOIOCTLCMD should be
translated as ENOTTY to user mode.
Cc: Laurent Pinchart
On Thu 13 September 2012 03:01:34 Laurent Pinchart wrote:
Hi Hans,
On Wednesday 05 September 2012 10:28:30 Hans Verkuil wrote:
On Wed 5 September 2012 10:04:41 Jun Nie wrote:
Is there any summary for this summit or presentation material? I am
looking forward for some idea on CEC. It is
On Thu 13 September 2012 03:24:53 Laurent Pinchart wrote:
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:05 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
During the 2012 Media Workshop it was decided that bus_info as returned
by VIDIOC_QUERYCAP can
On Thu 13 September 2012 04:21:14 Laurent Pinchart wrote:
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:06 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
This buffer type isn't used at all, and since it is effectively undefined
what it should do it
On Thu 13 September 2012 04:22:52 Laurent Pinchart wrote:
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:10 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
The 'custom' timings are no longer just for custom timings, but also for
standard CEA/VESA
Hi Hans,
thank you for your response.
On 13 September 2012 12:07, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu 13 September 2012 11:48:17 javier Martin wrote:
Hi,
our new i.MX27 based platform (Visstrim-SM20) uses an ov7675 sensor
attached to the CSI interface. Apparently, this sensor is
On Thu 13 September 2012 04:28:41 Laurent Pinchart wrote:
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:14 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
It was not entirely obvious that the sequence count should also
be set for output devices.
On Thu 13 September 2012 04:36:27 Laurent Pinchart wrote:
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:24 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
These will be used by v4l2-dev.c to improve ioctl checking.
I.e. ioctls for capture should
On Thu 13 September 2012 04:37:27 Laurent Pinchart wrote:
Hi Hans,
Thanks for the patch.
On Friday 07 September 2012 15:29:25 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
On Thu 13 September 2012 12:47:53 javier Martin wrote:
Hi Hans,
thank you for your response.
On 13 September 2012 12:07, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu 13 September 2012 11:48:17 javier Martin wrote:
Hi,
our new i.MX27 based platform (Visstrim-SM20) uses an ov7675 sensor
This patch adds driver for S5K4ECGX sensor with embedded ISP SoC,
S5K4ECGX, which is a 5M CMOS Image sensor from Samsung
The driver implements preview mode of the S5K4ECGX sensor.
capture (snapshot) operation, face detection are missing now.
Following controls are supported:
On 13 September 2012 13:00, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu 13 September 2012 12:47:53 javier Martin wrote:
Hi Hans,
thank you for your response.
On 13 September 2012 12:07, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu 13 September 2012 11:48:17 javier Martin wrote:
Hi,
Am Donnerstag, den 13.09.2012, 09:51 +0200 schrieb javier Martin:
If you want to speed up the process and you have you could send a pull
request to Mauro.
Should I include the four patches below in the pull request, or wait for
them to hit staging/for_v3.7 ?
But be careful with the following
On Thu, Sep 13, 2012 at 03:40:40AM +0200, Laurent Pinchart wrote:
Hi Sascha,
+int panel_get_modes(struct panel *panel, const struct fb_videomode
**modes)
+{
+ if (!panel-ops || !panel-ops-get_modes)
+ return 0;
+
+ return panel-ops-get_modes(panel, modes);
+}
Hi Philipp,
On 13 September 2012 13:24, Philipp Zabel p.za...@pengutronix.de wrote:
Am Donnerstag, den 13.09.2012, 09:51 +0200 schrieb javier Martin:
If you want to speed up the process and you have you could send a pull
request to Mauro.
Should I include the four patches below in the pull
On Thu 13 September 2012 13:19:14 javier Martin wrote:
On 13 September 2012 13:00, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu 13 September 2012 12:47:53 javier Martin wrote:
3.- Adjust vstart/vstop in order to remove an horizontal green line.
Why? Currently, in the driver, for VGA,
Hi Laurent,
Thanks for the review.
On Thursday 13 September 2012 06:45 AM, Laurent Pinchart wrote:
Hi Prabhakar,
Thanks for the patch.
On Tuesday 11 September 2012 19:53:38 Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
Add a helper function to modify the menu, max and
On Thu 13 September 2012 13:43:36 Prabhakar Lad wrote:
Hi Laurent,
Thanks for the review.
On Thursday 13 September 2012 06:45 AM, Laurent Pinchart wrote:
Hi Prabhakar,
Thanks for the patch.
On Tuesday 11 September 2012 19:53:38 Prabhakar Lad wrote:
From: Lad, Prabhakar
Done.
[ actually you're lucky - my low-priority RTT is in the range of
months atm ... ]
Christoph
2012/9/9 Hernán Rossetto hmronl...@gmail.com:
It seems these were not added to the dvb-apps mercurial repo.
Is this the way to submit these files ?
If not, please let me know and I'll follow
Hi,
On 09/12/2012 04:36 PM, Frank Schäfer wrote:
snip
And a negative side effect is, that unknown pac7302 devices (with no
V4LCONTROL_ROTATED_90_JPEG entry in libv4lconvert) do not work.
With a consistent API behavior, they would work fine (output a rotated
image). Users would at least know
Hi Javier,
I'm not too familiar with soc_camera and ov7670 drivers, so my comments
reflects my understanding of the question, without taking into account
drivers specifics.
Em 13-09-2012 06:48, javier Martin escreveu:
Hi,
our new i.MX27 based platform (Visstrim-SM20) uses an ov7675 sensor
This patch adds support for prepare/finish callbacks in VB2 allocators.
These callback are used for buffer flushing.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Federico Vaga federico.v...@gmail.com
---
Signed-off-by: Federico Vaga federico.v...@gmail.com
---
drivers/media/i2c/adv7180.c | 3 ---
1 file modificato, 3 rimozioni(-)
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 45ecf8d..43bc2b9 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
Signed-off-by: Federico Vaga federico.v...@gmail.com
---
drivers/media/v4l2-core/Kconfig | 5 +
drivers/media/v4l2-core/Makefile | 1 +
drivers/media/v4l2-core/videobuf2-dma-streaming.c | 205 ++
include/media/videobuf2-dma-streaming.h
Signed-off-by: Federico Vaga federico.v...@gmail.com
Acked-by: Giancarlo Asnaghi giancarlo.asna...@st.com
---
drivers/media/pci/sta2x11/Kconfig |2 +-
drivers/media/pci/sta2x11/sta2x11_vip.c | 1235 ++-
2 file modificati, 411 inserzioni(+), 826 rimozioni(-)
Hello,
On Thursday, September 13, 2012 3:53 PM Federico Vaga wrote:
Signed-off-by: Federico Vaga federico.v...@gmail.com
A few words explaining why this memory handling module is required or
beneficial will
definitely improve the commit :)
---
drivers/media/v4l2-core/Kconfig
On Thu 13 September 2012 15:52:47 Federico Vaga wrote:
Signed-off-by: Federico Vaga federico.v...@gmail.com
---
drivers/media/v4l2-core/Kconfig | 5 +
drivers/media/v4l2-core/Makefile | 1 +
drivers/media/v4l2-core/videobuf2-dma-streaming.c | 205
Multistream support for DVBAPI. Version increased to 5.8.
Signed-off-by: Evgeny Plehov evgenyple...@ukr.net
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index bb51edf..a6a6839 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -62,6 +62,7
Multistream support for stv090x
Signed-off-by: Evgeny Plehov evgenyple...@ukr.net
diff --git a/drivers/media/dvb-frontends/stv090x.c
b/drivers/media/dvb-frontends/stv090x.c
index ea86a56..13caec0 100644
--- a/drivers/media/dvb-frontends/stv090x.c
+++ b/drivers/media/dvb-frontends/stv090x.c
@@
Update multistream support.
Signed-off-by: Evgeny Plehov evgenyple...@ukr.net
diff --git a/drivers/media/pci/pt1/va1j5jf8007s.c
b/drivers/media/pci/pt1/va1j5jf8007s.c
index d980dfb..1b637b7 100644
--- a/drivers/media/pci/pt1/va1j5jf8007s.c
+++ b/drivers/media/pci/pt1/va1j5jf8007s.c
@@ -329,8
Multistream support for DVBAPI. If my english bad - please fix it somebody :)
Signed-off-by: Evgeny Plehov evgenyple...@ukr.net
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml
b/Documentation/DocBook/media/dvb/dvbproperty.xml
index d188be9..c7c14be 100644
---
Add hardware event/error counters which can be dumped into the kernel
log through VIDIOC_LOG_STATUS ioctl. The counters are reset in each
s_stream(1) call. Any errors are logged after streaming is turned off.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park
typo: steaming - streaming :-)
fixed
The header and esp. the source could really do with more
documentation. It is not at all clear from the code what the
dma-streaming allocator does and how it differs from other
allocators.
The other allocators are not documented and to understand them I
On Thursday, September 13, 2012 3:53 PM Federico Vaga wrote:
Signed-off-by: Federico Vaga federico.v...@gmail.com
A few words explaining why this memory handling module is required or
beneficial will definitely improve the commit :)
ok, I will write some lines
+static void
Hi Mauro,
please pull the following patches that fix a few issues in the coda driver and
add initial firmware loading and encoding support for the CODA7 series VPU
contained in i.MX51 and i.MX53 SoCs.
The following changes since commit 79e8c7bebb467bbc3f2514d75bba669a3f354324:
Merge tag
Added V4L2_CID_COLOR_KILLER control to the bt8xx driver.
The control V4L2_CID_PRIVATE_CHROMA_AGC was changed too because
with this change the bttv driver must touch two bits in the
SC Loop Control Registers, for controls V4L2_CID_COLOR_KILLER
and V4L2_CID_PRIVATE_CHROMA_AGC.
---
On Thu, 13 Sep 2012 17:46:32 +0200
Federico Vaga federico.v...@gmail.com wrote:
A few words explaining why this memory handling module is required or
beneficial will definitely improve the commit :)
ok, I will write some lines
In general, all of these patches need *much* better
On Thu, 13 Sep 2012 17:42:33 +0200
Federico Vaga federico.v...@gmail.com wrote:
The header and esp. the source could really do with more
documentation. It is not at all clear from the code what the
dma-streaming allocator does and how it differs from other
allocators.
The other
Well, there is some documentation here:
https://lwn.net/Articles/447435/
I know this, I learned from this page :)
What I'm saying is that I don't know what to write inside the code to
make it clearer than now. I think is clear, because if you know the
videobuf2, you know what I'm
In data giovedì 13 settembre 2012 11:45:31, Jonathan Corbet ha scritto:
On Thu, 13 Sep 2012 17:46:32 +0200
Federico Vaga federico.v...@gmail.com wrote:
A few words explaining why this memory handling module is required
or
beneficial will definitely improve the commit :)
ok, I
On 12-09-2012 17:56, Devin Heitmueller wrote:
On Wed, Sep 12, 2012 at 11:37 AM, Thomas Seilund t...@netmaster.dk wrote:
Hi All,
I just bought the HD PVR 2 Gaming Edition from Hauppauge.
It there any change this device will be supported by the hdpvr kernel
driver. (Or any other driver for that
Hi Hans,
Thanks for the RFC!
On Tue, Sep 04, 2012 at 12:38:06PM +0200, Hans Verkuil wrote:
Hi all,
During the Media Workshop last week we discussed how the timestamp and
sequence fields in struct v4l2_buffer should be used.
While trying to document the exact behavior I realized that
On Thu, 13 Sep 2012 10:40:57 +0800
Bob Liu lliu...@gmail.com wrote:
The addr parameter may not page aligned eg. when it's come from
vfb_mmap():vma-vm_start in video driver.
This patch fix the check in remap_pfn_range() else some driver like v4l2 will
fail in this function while calling
On Thu, Sep 13, 2012 at 01:29:54PM +0200, Sascha Hauer wrote:
You have seen my of videomode helper proposal. One result there
was that we want to have ranges for the margin/synclen fields.
Does it make sense to base this new panel framework on a more
sophisticated internal reprentation
On Thu, Sep 13, 2012 at 2:28 PM, Thomas Seilund t...@netmaster.dk wrote:
Do you know if anybody plans to make a driver?
I have not heard of any such plans. It's a brand new device though,
so it's possible that somebody will step up to do such (especially if
the original HD-PVR stops being
V4L2 buffers use the monotonic clock, while statistics buffers use wall
time. This makes it difficult to correlate video frames and statistics.
Switch statistics buffers to the monotonic clock to fix this.
Reported-by: Antoine Reversat a.rever...@gmail.com
Signed-off-by: Laurent Pinchart
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Thu Sep 13 19:00:21 CEST 2012
git hash:79e8c7bebb467bbc3f2514d75bba669a3f354324
gcc version: i686-linux-gcc
changeset 1248c7cb66d734b60efed41be7c7b86909812c0e broke html compilation:
Documentation/DocBook/v4l2.xml:584: parser error : Entity 'sub-subdev-g-edid'
not defined
Documentation/DocBook/v4l2.xml:626: parser error : chunk is not well balanced
Documentation/DocBook/media_api.xml:74: parser error
Hi Hans,
Thanks for the patch!
On Fri, Sep 07, 2012 at 03:29:12PM +0200, Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Add a new flag that tells userspace that the monotonic clock is used
for timestamps and update the documentation accordingly.
We decided on this new flag
Hi Sakari,
On Thursday 13 September 2012 23:38:14 Sakari Ailus wrote:
On Fri, Sep 07, 2012 at 03:29:12PM +0200, Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Add a new flag that tells userspace that the monotonic clock is used
for timestamps and update the documentation
On Thu September 13 2012 22:50:32 Laurent Pinchart wrote:
Hi Sakari,
On Thursday 13 September 2012 23:38:14 Sakari Ailus wrote:
On Fri, Sep 07, 2012 at 03:29:12PM +0200, Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Add a new flag that tells userspace that the
On Thu September 13 2012 22:11:40 Mauro Carvalho Chehab wrote:
changeset 1248c7cb66d734b60efed41be7c7b86909812c0e broke html compilation:
Documentation/DocBook/v4l2.xml:584: parser error : Entity 'sub-subdev-g-edid'
not defined
Documentation/DocBook/v4l2.xml:626: parser error : chunk is not
On Wed, 2012-09-12 at 08:32 +0200, Marx wrote:
Hello
I'm trying to use dual DVB-T tuner based on ITE9135 tuner. I use Debian
kernel 3.5-trunk-686-pae. My motherboard is AsRock E350M1 (no USB3 ports).
Tuner is detected ok, see log at the end of post.
When I try to scan channels, bug
Hi Laurent,
Thanks for the patch!
On Thu, Sep 13, 2012 at 09:53:23PM +0200, Laurent Pinchart wrote:
V4L2 buffers use the monotonic clock, while statistics buffers use wall
time. This makes it difficult to correlate video frames and statistics.
Switch statistics buffers to the monotonic
This commit add a sound codec driver for Silicon Laboratories 476x
series of AM/FM radio chips.
Signed-off-by: Andrey Smirnov andrey.smir...@convergeddevices.net
---
sound/soc/codecs/Kconfig |4 +
sound/soc/codecs/Makefile |2 +
sound/soc/codecs/si476x.c | 346
This patchset contains a driver for a Silicon Laboratories 476x series
of radio tuners. The driver itself is implemented as an MFD devices
comprised of three parts:
1. Core device that provides all the other devices with basic
functionality and locking scheme.
2. Radio device that translates
This commit adds a driver that exposes all the radio related
functionality of the Si476x series of chips via the V4L2 subsystem.
Signed-off-by: Andrey Smirnov andrey.smir...@convergeddevices.net
---
drivers/media/radio/Kconfig| 17 +
drivers/media/radio/radio-si476x.c | 1307
Em 13-09-2012 20:19, Mauro Carvalho Chehab escreveu:
Em Sat, 18 Aug 2012 11:48:52 -0400
Steven Toth st...@kernellabs.com escreveu:
Mauro, please read below, a new set of patches I'm submitting for merge.
On Thu, Aug 16, 2012 at 2:49 PM, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu August
Thank you Christoph!
So is this (emailing you) the right way to get stuff added to the
mercurial repo ?
Please let me know so I know how to proceed in the future.
Thanks again,
Hernán.-
On Thu, Sep 13, 2012 at 9:03 AM, Christoph Pfister
christophpfis...@gmail.com wrote:
Done.
[ actually
Em Thu, 13 Sep 2012 20:23:42 -0300
Mauro Carvalho Chehab mche...@redhat.com escreveu:
Em 13-09-2012 20:19, Mauro Carvalho Chehab escreveu:
Em Sat, 18 Aug 2012 11:48:52 -0400
Steven Toth st...@kernellabs.com escreveu:
Mauro, please read below, a new set of patches I'm submitting for
Em 13-09-2012 21:59, Mauro Carvalho Chehab escreveu:
Em Thu, 13 Sep 2012 20:23:42 -0300
Mauro Carvalho Chehab mche...@redhat.com escreveu:
Em 13-09-2012 20:19, Mauro Carvalho Chehab escreveu:
Em Sat, 18 Aug 2012 11:48:52 -0400
Steven Toth st...@kernellabs.com escreveu:
Mauro, please read
85 matches
Mail list logo