Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Hi, On Friday 29 May 2015 08:34 PM, Felipe Balbi wrote: Hi, On Fri, May 29, 2015 at 05:04:38PM +0530, Kishon Vijay Abraham I wrote: Hi Felipe, On Wednesday 27 May 2015 12:09 AM, Felipe Balbi wrote: On Tue, May 26, 2015 at 11:37:17AM -0700, Arun Ramamurthy wrote: Hi On 15-05-26 07:19 AM, Felipe Balbi wrote: HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks Then, if the option is invisible, how can you depend on it ? It can never be selected by poking around in Kconfig. IMO, it's counterintuitive that you need to enable a PHY driver before you can see your EHCI/OHCI/whatever controller listed in Kconfig. If the controller requires PHY for it to be functional, it is okay to make the controller depend on PHY IMHO. We want to try and minimize the usage of 'select' wherever possible or else 'select' is the most intuitive way. The other option is just to leave the 'depends on' and let the user select PHY. How can you 'depend' on something that the user can't select by navigating through Kconfig ? hmm... Actually it's selected when the user selects the PHY driver. Maybe we should directly depend on the PHY driver instead of Generic PHY? Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
On Mon, Jun 01, 2015 at 06:22:41PM +0530, Kishon Vijay Abraham I wrote: Hi, On Friday 29 May 2015 08:34 PM, Felipe Balbi wrote: Hi, On Fri, May 29, 2015 at 05:04:38PM +0530, Kishon Vijay Abraham I wrote: Hi Felipe, On Wednesday 27 May 2015 12:09 AM, Felipe Balbi wrote: On Tue, May 26, 2015 at 11:37:17AM -0700, Arun Ramamurthy wrote: Hi On 15-05-26 07:19 AM, Felipe Balbi wrote: HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks Then, if the option is invisible, how can you depend on it ? It can never be selected by poking around in Kconfig. IMO, it's counterintuitive that you need to enable a PHY driver before you can see your EHCI/OHCI/whatever controller listed in Kconfig. If the controller requires PHY for it to be functional, it is okay to make the controller depend on PHY IMHO. We want to try and minimize the usage of 'select' wherever possible or else 'select' is the most intuitive way. The other option is just to leave the 'depends on' and let the user select PHY. How can you 'depend' on something that the user can't select by navigating through Kconfig ? hmm... Actually it's selected when the user selects the PHY driver. that's my point, don't you think it's a little counter-intuitive ? Maybe we should directly depend on the PHY driver instead of Generic PHY? maybe... But then what do you do when you have different boards using different PHYs ? --
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Hi Felipe, On Wednesday 27 May 2015 12:09 AM, Felipe Balbi wrote: On Tue, May 26, 2015 at 11:37:17AM -0700, Arun Ramamurthy wrote: Hi On 15-05-26 07:19 AM, Felipe Balbi wrote: HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks Then, if the option is invisible, how can you depend on it ? It can never be selected by poking around in Kconfig. IMO, it's counterintuitive that you need to enable a PHY driver before you can see your EHCI/OHCI/whatever controller listed in Kconfig. If the controller requires PHY for it to be functional, it is okay to make the controller depend on PHY IMHO. We want to try and minimize the usage of 'select' wherever possible or else 'select' is the most intuitive way. The other option is just to leave the 'depends on' and let the user select PHY. Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Tejun, Maxime, Sylwester, Kyungmin On Thursday 23 April 2015 04:34 AM, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com Need your ACK for this patch. Thanks Kishon --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY select USB_EHCI_HCD_PLATFORM help Enable support for the on-chip EHCI controller found on @@ -409,7 +409,7 @@ config USB_OHCI_HCD_SPEAR config USB_OHCI_HCD_STI tristate Support for ST STiHxxx on-chip OHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY select USB_OHCI_HCD_PLATFORM help Enable support for the on-chip OHCI controller found on diff --git a/drivers/video/fbdev/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig index 1f16b46..6c53894 100644 --- a/drivers/video/fbdev/exynos/Kconfig +++ b/drivers/video/fbdev/exynos/Kconfig @@ -16,7 +16,7 @@ if EXYNOS_VIDEO config EXYNOS_MIPI_DSI bool EXYNOS MIPI DSI driver support. - select GENERIC_PHY + depends on GENERIC_PHY help This enables support for MIPI-DSI device. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Hi Kishon, Arun, On 05/29/2015 02:37 PM, Kishon Vijay Abraham I wrote: Tejun, Maxime, Sylwester, Kyungmin On Thursday 23 April 2015 04:34 AM, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com Need your ACK for this patch. For the STi part, you can add my: Acked-by: Maxime Coquelin maxime.coque...@st.com Regards, Maxime -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
On Fri, May 29, 2015 at 06:07:18PM +0530, Kishon Vijay Abraham I wrote: Tejun, Maxime, Sylwester, Kyungmin On Thursday 23 April 2015 04:34 AM, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com Need your ACK for this patch. For ATA part, Acked-by: Tejun Heo t...@kernel.org Thanks. -- tejun -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
On 29/05/15 14:37, Kishon Vijay Abraham I wrote: Tejun, Maxime, Sylwester, Kyungmin On Thursday 23 April 2015 04:34 AM, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com Need your ACK for this patch. For drivers/media/platform/exynos4-is/Kconfig drivers/video/fbdev/exynos/Kconfig Acked-by: Sylwester Nawrocki s.nawro...@samsung.com -- Thanks, Sylwester -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Hi, On Fri, May 29, 2015 at 05:04:38PM +0530, Kishon Vijay Abraham I wrote: Hi Felipe, On Wednesday 27 May 2015 12:09 AM, Felipe Balbi wrote: On Tue, May 26, 2015 at 11:37:17AM -0700, Arun Ramamurthy wrote: Hi On 15-05-26 07:19 AM, Felipe Balbi wrote: HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks Then, if the option is invisible, how can you depend on it ? It can never be selected by poking around in Kconfig. IMO, it's counterintuitive that you need to enable a PHY driver before you can see your EHCI/OHCI/whatever controller listed in Kconfig. If the controller requires PHY for it to be functional, it is okay to make the controller depend on PHY IMHO. We want to try and minimize the usage of 'select' wherever possible or else 'select' is the most intuitive way. The other option is just to leave the 'depends on' and let the user select PHY. How can you 'depend' on something that the user can't select by navigating through Kconfig ? -- balbi signature.asc Description: Digital signature
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
On Tue, May 26, 2015 at 11:37:17AM -0700, Arun Ramamurthy wrote: Hi On 15-05-26 07:19 AM, Felipe Balbi wrote: HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks Then, if the option is invisible, how can you depend on it ? It can never be selected by poking around in Kconfig. IMO, it's counterintuitive that you need to enable a PHY driver before you can see your EHCI/OHCI/whatever controller listed in Kconfig. -- balbi signature.asc Description: Digital signature
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Hi On 15-05-26 07:19 AM, Felipe Balbi wrote: HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
HI, On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote: On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks Since GENERIC_PHY is visible from Kconfig, it would be much nicer to avoid select altogether. -- balbi signature.asc Description: Digital signature
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
On 15-05-14 05:52 PM, Felipe Balbi wrote: Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. Felipe, I dont understand your concern, could you please explain it more detail? The logic behind the changes is that in cases where there was an explicit dependency, I changed it to depends on and in other cases I changed it to selects. Thanks -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Em Wed, 22 Apr 2015 16:04:10 -0700 Arun Ramamurthy arun.ramamur...@broadcom.com escreveu: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- For media part: Acked-by: Mauro Carvalho Chehab mche...@osg.samsung.com drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY select USB_EHCI_HCD_PLATFORM help Enable support for the on-chip EHCI controller found on @@ -409,7 +409,7 @@ config USB_OHCI_HCD_SPEAR config USB_OHCI_HCD_STI tristate Support for ST STiHxxx on-chip OHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY select USB_OHCI_HCD_PLATFORM help Enable support for the on-chip OHCI controller found on diff --git a/drivers/video/fbdev/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig index 1f16b46..6c53894 100644 --- a/drivers/video/fbdev/exynos/Kconfig +++ b/drivers/video/fbdev/exynos/Kconfig @@ -16,7 +16,7 @@ if EXYNOS_VIDEO config EXYNOS_MIPI_DSI bool EXYNOS MIPI DSI driver support. - select GENERIC_PHY + depends on GENERIC_PHY help This enables support for MIPI-DSI device. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Hi, On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote: Most of the phy providers use select to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to select GENERIC_PHY and all non-phy drivers use depends on when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as select. Signed-off-by: Arun Ramamurthy arun.ramamur...@broadcom.com --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig| 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..6d2e881 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -301,7 +301,6 @@ config SATA_MV tristate Marvell SATA support depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..b6f3eaa 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2962de2..edecdb1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -5,7 +5,7 @@ menu PHY Subsystem config GENERIC_PHY - bool PHY Core + bool help Generic PHY support. @@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate Renesas R-Car generation 2 USB PHY driver depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY so some you changed from depends to select... help Support for USB PHY found on Renesas R-Car generation 2 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5ad60e4..e2197e2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate Support for ST STiHxxx on-chip EHCI USB controller depends on ARCH_STI OF - select GENERIC_PHY + depends on GENERIC_PHY while others you changed from select to depends. NAK. -- balbi signature.asc Description: Digital signature
