On 01/26/2012 12:16 AM, Claus Olesen wrote:
just got 3.2.1-3.fc16.i686.PAE
the issue that the driver had to be removed for the 290e to work after
a replug is gone.
the issue that a usb mem stick cannot be mounted while the 290e is
plugged in still lingers.
one workaround is to unplug the 290e
the dmesg output from inplug of 290e until usb mem stick mount timeout
with a cut marked --- cut similar --- between mount and timeout for
less output is
inplug 290e
[ 112.367345] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 112.482773] usb 2-3: New USB device found,
On 01/26/2012 01:46 PM, Claus Olesen wrote:
the dmesg output from inplug of 290e until usb mem stick mount timeout
with a cut marked --- cut similar --- between mount and timeout for
less output is
I think it is maybe some incapability of em28xx driver. Maybe it could
be something to do with
On Thu, Jan 26, 2012 at 6:58 AM, Antti Palosaari cr...@iki.fi wrote:
I think it is maybe some incapability of em28xx driver. Maybe it could be
something to do with USB HCI too...
From a USB standpoint there isn't a whole lot the em28xx driver could
do wrong. It's an isoc device, and perhaps
the behavior with the latest media_build.git is the same as that which
was with fedora stock.
the dmesg is
inplug 290e
[ 112.284350] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 112.399774] usb 2-3: New USB device found, idVendor=2013, idProduct=024f
[ 112.399783] usb 2-3: New
On 01/26/2012 07:09 PM, Claus Olesen wrote:
the behavior with the latest media_build.git is the same as that which
was with fedora stock.
After all I am almost 100% sure it is em28xx (USB-interface driver used)
or/and USB-bus related issue. Likely it will happen for other em28xx
devices too.
I just came to think of my old 800e because also it is a em28xx device
and for what it is worth I just tried it and it does not exhibit the
issue. it's dmesg is
inplug 800e
[ 179.499370] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 179.622477] usb 2-4: New USB device found,
