Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Hi! Still no change regarding regaining IR support for VP2040 device. Despite successfully loading the module from Abraham's tree and starting the UART, I still do not see the input device that I can use with lirc. I tried both trees: today's Liplianin tree, dmesg on loading the mantis module: ir_common: Unknown symbol ir_g_keycode_from_table ir_common: Unknown symbol ir_core_debug today's Abraham's tree, dmesg on loading the mantis modulem verbose=5: the result is still the same as the last time I wrote about it (no input device is registered, despite successful uart initialization). -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On pon, 2009-12-28 at 21:06 +0100, Aljaž Prusnik wrote: > On pon, 2009-12-28 at 20:28 +0100, Aljaž Prusnik wrote: > > On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote: > > > Can you please do a lspci -vn for the Mantis card you have ? Also try > > > loading the mantis.ko module with verbose=5 module parameter, to get > > > more debug information. > > > > To continue, it seems the module is registering the remote commands, but > dunno, why irw shows nothing: Well - to answer myself on this one, it doesn't because there is no input device registered. I used to have this under input devices (cat /proc/bus/input/devices): I: Bus=0001 Vendor= Product= Version=0001 N: Name="Mantis VP-2040 IR Receiver" P: Phys=pci-:03:06.0/ir0 S: Sysfs=/devices/virtual/input/input5 U: Uniq= H: Handlers=kbd event5 B: EV=13 B: KEY=108fc330 2842041 0 200018000 21804801 9e96c0 ffc So the question is, why is it not registered as an input anymore? Regards, Aljaz -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On pon, 2009-12-28 at 20:28 +0100, Aljaž Prusnik wrote: > On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote: > > Can you please do a lspci -vn for the Mantis card you have ? Also try > > loading the mantis.ko module with verbose=5 module parameter, to get > > more debug information. > To continue, it seems the module is registering the remote commands, but dunno, why irw shows nothing: dmesg of typing on remote: [ 4854.805594] mantis_uart_read (0): Reading ... <3d> [ 4854.805605] mantis_uart_work (0): UART BUF:0 <3d> [ 4854.805609] [ 4854.805615] mantis_uart_read (0): Reading ... <3d> [ 4854.805621] mantis_uart_work (0): UART BUF:0 <3d> [ 4854.805624] [ 4895.266923] [ 4895.266926] -- Stat=<4000800> Mask=<800> -- [ 4895.266956] [ 4895.266958] -- Stat=<4000800> Mask=<800> -- [ 4895.266979] [ 4895.266981] -- Stat=<4000800> Mask=<800> -- [ 4895.266999] [ 4895.267000] -- Stat=<4000800> Mask=<800> -- [ 4895.267015] [ 4895.267016] -- Stat=<4000800> Mask=<800> -- [ 4895.267031] [ 4895.267032] -- Stat=<4000800> Mask=<800> -- [ 4895.267043] mantis_uart_read (0): Reading ... <3e> [ 4895.267054] mantis_uart_work (0): UART BUF:0 <3e> [ 4895.267058] [ 4895.267065] mantis_uart_read (0): Reading ... <3e> [ 4895.267070] mantis_uart_work (0): UART BUF:0 <3e> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote: > Can you please do a lspci -vn for the Mantis card you have ? Also try > loading the mantis.ko module with verbose=5 module parameter, to get > more debug information. $ lspci -vn 03:07.0 0480: 1822:4e35 (rev 01) Subsystem: 1ae4:0002 Flags: bus master, medium devsel, latency 32, IRQ 21 Memory at fdcff000 (32-bit, prefetchable) [size=4K] Kernel driver in use: Mantis $ modprobe -v mantis verbose=5 insmod /lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/mantis/mantis_core.ko insmod /lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/mantis/mantis.ko verbose=5 $ dmesg [ 2371.762511] Mantis :03:07.0: PCI INT A disabled [ 2462.703393] Mantis :03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2462.704761] DVB: registering new adapter (Mantis DVB adapter) [ 2463.563234] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 2522.842548] Mantis :03:07.0: PCI INT A disabled [ 2534.495759] found a VP-2040 PCI DVB-C device on (03:07.0), [ 2534.495771] Mantis :03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2534.495796] Mantis Rev 1 [1ae4:0002], irq: 21, latency: 32 [ 2534.495799] memory: 0x0, mmio: 0xc900128cc000 [ 2534.495818] mantis_stream_control (0): Set stream to HIF [ 2534.495841] mantis_i2c_init (0): Initializing I2C .. [ 2534.495845] mantis_i2c_init (0): Disabling I2C interrupt [ 2534.495849] mantis_i2c_xfer (0): Messages:2 [ 2534.495852] mantis_i2c_write: Address=[0x50] [ 08 ] [ 2534.496243] mantis_i2c_read: Address=[0x50] [ 00 08 c9 d0 02 09 ] [ 2534.497049] MAC Address=[00:08:c9:d0:02:09] [ 2534.497051] mantis_dma_init (0): Mantis DMA init [ 2534.497071] mantis_alloc_buffers (0): DMA=0x3d67 cpu=0x88003d67 size=65536 [ 2534.497073] mantis_alloc_buffers (0): RISC=0x3b731000 cpu=0x88003b731000 size=1000 [ 2534.497076] mantis_calc_lines (0): Mantis RISC block bytes=[4096], line bytes=[2048], line count=[32] [ 2534.497077] mantis_dvb_init (0): dvb_register_adapter [ 2534.497079] DVB: registering new adapter (Mantis DVB adapter) [ 2534.497081] mantis_dvb_init (0): dvb_dmx_init [ 2534.497166] mantis_dvb_init (0): dvb_dmxdev_init [ 2534.497269] mantis_frontend_power (0): Power ON [ 2534.497271] gpio_set_bits (0): Set Bit <12> to <1> [ 2534.497274] gpio_set_bits (0): GPIO Value <3000> [ 2534.598099] gpio_set_bits (0): Set Bit <12> to <1> [ 2534.598111] gpio_set_bits (0): GPIO Value <3000> [ 2534.699066] mantis_frontend_soft_reset (0): Frontend RESET [ 2534.699077] gpio_set_bits (0): Set Bit <13> to <0> [ 2534.699085] gpio_set_bits (0): GPIO Value <1000> [ 2534.800077] gpio_set_bits (0): Set Bit <13> to <0> [ 2534.800087] gpio_set_bits (0): GPIO Value <1000> [ 2534.901079] gpio_set_bits (0): Set Bit <13> to <1> [ 2534.901089] gpio_set_bits (0): GPIO Value <3000> [ 2535.002089] gpio_set_bits (0): Set Bit <13> to <1> [ 2535.002099] gpio_set_bits (0): GPIO Value <3000> [ 2535.354084] vp2040_frontend_init (0): Probing for CU1216 (DVB-C) [ 2535.354096] mantis_i2c_xfer (0): Messages:2 [ 2535.354103] mantis_i2c_write: Address=[0x50] [ ff ] [ 2535.354328] mantis_i2c_read: Address=[0x50] [ e4 ] [ 2535.354555] mantis_i2c_xfer (0): Messages:2 [ 2535.354560] mantis_i2c_write: Address=[0x0c] [ 1a ] [ 2535.354781] mantis_i2c_read: Address=[0x0c] [ 7d ] [ 2535.355034] mantis_i2c_xfer (0): Messages:2 [ 2535.355039] mantis_i2c_write: Address=[0x50] [ ff ] [ 2535.355257] mantis_i2c_read: Address=[0x50] [ e4 ] [ 2535.355482] mantis_i2c_xfer (0): Messages:1 [ 2535.355486] mantis_i2c_write: Address=[0x0c] [ 00 33 ] [ 2535.355819] mantis_i2c_xfer (0): Messages:2 [ 2535.355823] mantis_i2c_write: Address=[0x0c] [ 1a ] [ 2535.356055] mantis_i2c_read: Address=[0x0c] [ 7d ] [ 2535.356279] vp2040_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c [ 2535.356285] vp2040_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 2535.356291] vp2040_frontend_init (0): Done! [ 2535.356298] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 2535.356573] mantis_uart_init (0): Initializing UART @ 9600bps parity:NONE [ 2535.356602] mantis_uart_read (0): Reading ... <3f> [ 2535.356609] mantis_uart_work (0): UART BUF:0 <3f> [ 2535.356613] [ 2535.356619] mantis_uart_init (0): UART succesfully initialized -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Hello Aljaz, On Thu, Dec 24, 2009 at 8:51 PM, Aljaž Prusnik wrote: > On čet, 2009-12-24 at 17:45 +0100, Ruediger Dohmhardt wrote: >> Aljaž, thanks for the "reply". As Manu said above there was a build problem. >> As said already in this Thread, I downloaded version 2315248f648c, which >> compiles fine and >> has all modules for the 2033 DVB-C. > > I have the same version and it doesn't work for me. I have a 2040 > module. Can you please do a lspci -vn for the Mantis card you have ? Also try loading the mantis.ko module with verbose=5 module parameter, to get more debug information. Regards, Manu -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On čet, 2009-12-24 at 17:45 +0100, Ruediger Dohmhardt wrote: > Aljaž, thanks for the "reply". As Manu said above there was a build problem. > As said already in this Thread, I downloaded version 2315248f648c, which > compiles fine and > has all modules for the 2033 DVB-C. I have the same version and it doesn't work for me. I have a 2040 module. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Aljaž Prusnik schrieb: > On sre, 2009-12-23 at 23:24 +0400, Manu Abraham wrote: > >>> Aljaz, do you have the module mantis.ko? >>> >> There was a build issue when i posted the link originally, but it had >> been fixed.. >> >> m...@manu-04:/stor/work/merge/v4l-dvb/v4l> ls *.ko |grep mantis >> mantis_core.ko >> mantis.ko >> >> > > Yup, I have both of them. I just compiled http://jusst.de/hg/v4l-dvb > again and the result is (depmode -a was run): > > - ir-common.ko is under drivers/media/common (not drivers/media/IR like > Igor suggested but that is probably because it's a different > repository). > - mantis.ko and mantis_core.ko are under drivers/media/dvb/mantis > > Aljaž, thanks for the "reply". As Manu said above there was a build problem. As said already in this Thread, I downloaded version 2315248f648c, which compiles fine and has all modules for the 2033 DVB-C. Rüdiger -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On sre, 2009-12-23 at 23:24 +0400, Manu Abraham wrote: > > Aljaz, do you have the module mantis.ko? > There was a build issue when i posted the link originally, but it had > been fixed.. > > m...@manu-04:/stor/work/merge/v4l-dvb/v4l> ls *.ko |grep mantis > mantis_core.ko > mantis.ko > Yup, I have both of them. I just compiled http://jusst.de/hg/v4l-dvb again and the result is (depmode -a was run): - ir-common.ko is under drivers/media/common (not drivers/media/IR like Igor suggested but that is probably because it's a different repository). - mantis.ko and mantis_core.ko are under drivers/media/dvb/mantis The modules loaded are: mantis 14728 0 mantis_core23909 12 mantis ir_common 27005 1 mantis_core mb86a1616598 1 mantis tda100214822 1 mantis tda100235823 1 mantis zl10353 5893 1 mantis stv0299 7860 1 mantis dvb_core 75201 2 mantis_core,stv0299 kernel log has only these lines on mantis: Mantis :03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 DVB: registering new adapter (Mantis DVB adapter) DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... and that's it. No VP-2040 to be seen anywhere and it's not there even if I do cat /proc/bus/input/devices (used to be one of the inputs). So I guess this is now the work in progress if I understand correctly or should the input be recognized regardless? Just to confirm on the autoload: no, it does not happen by default. I have to manually put modules under /etc/modules to load them on startup. Regards, Aljaz -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Manu Abraham schrieb: > On Thu, Dec 24, 2009 at 12:01 AM, Ruediger Dohmhardt > wrote: > >> Manu Abraham schrieb: >> >>> Hello Ruediger, >>> >>> On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt >>> wrote: >>> >>> Aljaž Prusnik schrieb: > If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok, > module loads, but there is no remote anywhere (there is an IR folder > with the ir-common.ko file, under common there is not). > > > > Aljaz, do you have the module mantis.ko? Ruediger >>> There was a build issue when i posted the link originally, but it had >>> been fixed.. >>> >>> >>> >> Yupp, it works now! >> >> I just downloaded version 2315248f648c. It compiles fine on Suse 11.1 and >> it works here with vdr-1.7.10 and xineliboutput (from CVS). >> >> However, as Aljaž also noted, the driver does not "autoload". >> I need to do modprobe mantis.ko. >> >> Manu, this used to work, but I do not remember when the "autoload was lost". >> > > > Have you run depmod ? > Yes, I did depmod -a several times. Actually, if I were to miss a "depmod" than also the command modprobe mantis would not work, because the module would not be found. Ruediger -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On Thu, Dec 24, 2009 at 12:01 AM, Ruediger Dohmhardt wrote: > Manu Abraham schrieb: >> Hello Ruediger, >> >> On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt >> wrote: >> >>> Aljaž Prusnik schrieb: >>> If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok, module loads, but there is no remote anywhere (there is an IR folder with the ir-common.ko file, under common there is not). >>> Aljaz, do you have the module mantis.ko? >>> >>> Ruediger >>> >>> >> >> There was a build issue when i posted the link originally, but it had >> been fixed.. >> >> > Yupp, it works now! > > I just downloaded version 2315248f648c. It compiles fine on Suse 11.1 and > it works here with vdr-1.7.10 and xineliboutput (from CVS). > > However, as Aljaž also noted, the driver does not "autoload". > I need to do modprobe mantis.ko. > > Manu, this used to work, but I do not remember when the "autoload was lost". Have you run depmod ? Regards, Manu -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Manu Abraham schrieb: > Hello Ruediger, > > On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt > wrote: > >> Aljaž Prusnik schrieb: >> >>> If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok, >>> module loads, but there is no remote anywhere (there is an IR folder >>> with the ir-common.ko file, under common there is not). >>> >>> >>> >> Aljaz, do you have the module mantis.ko? >> >> Ruediger >> >> > > There was a build issue when i posted the link originally, but it had > been fixed.. > > Yupp, it works now! I just downloaded version 2315248f648c. It compiles fine on Suse 11.1 and it works here with vdr-1.7.10 and xineliboutput (from CVS). However, as Aljaž also noted, the driver does not "autoload". I need to do modprobe mantis.ko. Manu, this used to work, but I do not remember when the "autoload was lost". Ciao Ruediger D. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Hello Ruediger, On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt wrote: > Aljaž Prusnik schrieb: >> >> If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok, >> module loads, but there is no remote anywhere (there is an IR folder >> with the ir-common.ko file, under common there is not). >> >> > Aljaz, do you have the module mantis.ko? > > Ruediger > There was a build issue when i posted the link originally, but it had been fixed.. m...@manu-04:/stor/work/merge/v4l-dvb/v4l> ls *.ko |grep mantis mantis_core.ko mantis.ko Dec 12 01:18:25 manu-04 kernel: [168362.291827] found a VP-2033 PCI DVB-C device on (06:01.0), Dec 12 01:18:25 manu-04 kernel: [168362.291842] Mantis :06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Dec 12 01:18:25 manu-04 kernel: [168362.291848] Mantis :06:01.0: enabling bus mastering Dec 12 01:18:25 manu-04 kernel: [168362.291876] Mantis Rev 1 [1822:0008], irq: 17, latency: 64 Dec 12 01:18:25 manu-04 kernel: [168362.291881] memory: 0x0, mmio: 0xf875e000 Dec 12 01:18:25 manu-04 kernel: [168362.292577] i2c-adapter i2c-7: adapter [Mantis I2C] registered Dec 12 01:18:25 manu-04 kernel: [168362.292586] i2c-adapter i2c-7: master_xfer[0] W, addr=0x50, len=1 Dec 12 01:18:25 manu-04 kernel: [168362.292590] i2c-adapter i2c-7: master_xfer[1] R, addr=0x50, len=6 Dec 12 01:18:25 manu-04 kernel: [168362.292593] mantis_i2c_write: Address=[0x50] [ 08 ] Dec 12 01:18:25 manu-04 kernel: [168362.292813] mantis_i2c_read: Address=[0x50] [ 00 08 ca 19 ea ee ] Dec 12 01:18:25 manu-04 kernel: [168362.293539] MAC Address=[00:08:ca:19:ea:ee] Dec 12 01:18:25 manu-04 kernel: [168362.293565] mantis_alloc_buffers (0): DMA=0x2c5 cpu=0xc2c5 size=65536 Dec 12 01:18:25 manu-04 kernel: [168362.293571] mantis_alloc_buffers (0): RISC=0x31e36000 cpu=0xf1e36000 size=1000 Dec 12 01:18:25 manu-04 kernel: [168362.293575] DVB: registering new adapter (Mantis DVB adapter) Dec 12 01:18:26 manu-04 kernel: [168363.172508] vp2033_frontend_init (0): Probing for CU1216 (DVB-C) Dec 12 01:18:26 manu-04 kernel: [168363.172515] i2c-adapter i2c-7: master_xfer[0] W, addr=0x50, len=1 Dec 12 01:18:26 manu-04 kernel: [168363.172519] i2c-adapter i2c-7: master_xfer[1] R, addr=0x50, len=1 Dec 12 01:18:26 manu-04 kernel: [168363.172522] mantis_i2c_write: Address=[0x50] [ ff ] Dec 12 01:18:26 manu-04 kernel: [168363.172741] mantis_i2c_read: Address=[0x50] [ 22 ] Dec 12 01:18:26 manu-04 kernel: [168363.172967] i2c-adapter i2c-7: master_xfer[0] W, addr=0x0c, len=1 Dec 12 01:18:26 manu-04 kernel: [168363.172970] i2c-adapter i2c-7: master_xfer[1] R, addr=0x0c, len=1 Dec 12 01:18:26 manu-04 kernel: [168363.172973] mantis_i2c_write: Address=[0x0c] [ 1a ] Dec 12 01:18:26 manu-04 kernel: [168363.173194] mantis_i2c_read: Address=[0x0c] [ 7c ] Dec 12 01:18:26 manu-04 kernel: [168363.173416] TDA10021: i2c-addr = 0x0c, id = 0x7c Dec 12 01:18:26 manu-04 kernel: [168363.173419] vp2033_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10021) @ 0x0c Dec 12 01:18:26 manu-04 kernel: [168363.173422] vp2033_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success Dec 12 01:18:26 manu-04 kernel: [168363.173428] DVB: registering adapter 0 frontend 0 (Philips TDA10021 DVB-C)... Dec 12 01:18:26 manu-04 kernel: [168363.173549] mantis_uart_init (0): Initializing UART @ 9600 bps NONE parity Dec 12 01:18:26 manu-04 kernel: [168363.175459] mantis_uart_work (0): UART BUF:0 <3f> The IR stuff needs a bit more work, which I will be pushing out, later .. Regards, Manu -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
Aljaž Prusnik schrieb: > > If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok, > module loads, but there is no remote anywhere (there is an IR folder > with the ir-common.ko file, under common there is not). > > Aljaz, do you have the module mantis.ko? Ruediger -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On sre, 2009-12-23 at 17:53 +0200, Igor M. Liplianin wrote: > Since module ir-common.ko moved to IR directory just remove old one. > > rm /lib/modules/$(uname -r)/kernel/drivers/media/common/ir-common.ko > > Also it would be good to do > > make remove > > Then again build and install drivers. > Ok. There was no common folder in the above path. Anyway, I did rm and make remove and did a new build (2.6.33-rc1). First, there were warnings: WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/saa7134.ko] undefined! WARNING: "ir_input_unregister" [/mnt/storage/temp/technisat/s2-liplianin/v4l/saa7134.ko] undefined! WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/mantis.ko] undefined! WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-kbd-i2c.ko] undefined! WARNING: "ir_input_unregister" [/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-kbd-i2c.ko] undefined! WARNING: "ir_core_debug" [/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-common.ko] undefined! WARNING: "ir_g_keycode_from_table" [/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-common.ko] undefined! WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/em28xx.ko] undefined! WARNING: "ir_input_unregister" [/mnt/storage/temp/technisat/s2-liplianin/v4l/em28xx.ko] undefined! WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx88xx.ko] undefined! WARNING: "ir_input_unregister" [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx88xx.ko] undefined! WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx23885.ko] undefined! WARNING: "ir_input_unregister" [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx23885.ko] undefined! WARNING: "ir_input_register" [/mnt/storage/temp/technisat/s2-liplianin/v4l/bttv.ko] undefined! WARNING: "ir_input_unregister" [/mnt/storage/temp/technisat/s2-liplianin/v4l/bttv.ko] undefined! Then I restarted the machine and this is in the kernel log: ir_common: Unknown symbol ir_g_keycode_from_table ir_common: Unknown symbol ir_core_debug + no mantis module loaded. I have the IR folder under lib/modules where ir-common.ko resides. In the common folder there is no file ir-common.ko. If I do manual loading, I get: sudo modprobe mantis WARNING: Error inserting mb86a16 (/lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/frontends/mb86a16.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting mantis (/lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/mantis/mantis.ko): Unknown symbol in module, or unknown parameter (see dmesg) dmesg says: [ 289.939402] ir_common: Unknown symbol ir_g_keycode_from_table [ 289.939690] ir_common: Unknown symbol ir_core_debug This is the s2-liplianin tree. If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok, module loads, but there is no remote anywhere (there is an IR folder with the ir-common.ko file, under common there is not). Aljaz -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
On 23 декабря 2009 16:30:16 Aljaž Prusnik wrote: > In the same vein, I'm interested in this one, namely: > > I have tried the http://jusst.de/hg/v4l-dvb, since recently the > liplianin mantis driver is not working (unknown symbols...). > > However, the problems I have as opposed to the previously working driver > are: > - the module does not install in a way it gets autoloaded on startup - I > have to manually add it (modprobe) or put it into /etc/modules (debian) > - while the card itself works, I don't have IR functionality anymore. > > >From what I gather from the kernel log, the input line > > input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4 > > just doesn't exist anymore. Further more the whole bunch is missing: > > mantis_ca_init (0): Registering EN50221 device > mantis_ca_init (0): Registered EN50221 device > mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface > input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4 > Creating IR device irrcv0 > > > I tried 2.6.32 kernel which worked before, now I'm using 2.6.33-rc1 > where I had to comment out #include the from the > v4l-dvb/v4l/config-compat.h. > > > Any ideas how to get the comfort back? ;) > > Regards, > Aljaz > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Since module ir-common.ko moved to IR directory just remove old one. rm /lib/modules/$(uname -r)/kernel/drivers/media/common/ir-common.ko Also it would be good to do make remove Then again build and install drivers. -- Igor M. Liplianin Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Which modules for the VP-2033? Where is the module "mantis.ko"?
In the same vein, I'm interested in this one, namely: I have tried the http://jusst.de/hg/v4l-dvb, since recently the liplianin mantis driver is not working (unknown symbols...). However, the problems I have as opposed to the previously working driver are: - the module does not install in a way it gets autoloaded on startup - I have to manually add it (modprobe) or put it into /etc/modules (debian) - while the card itself works, I don't have IR functionality anymore. >From what I gather from the kernel log, the input line input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4 just doesn't exist anymore. Further more the whole bunch is missing: mantis_ca_init (0): Registering EN50221 device mantis_ca_init (0): Registered EN50221 device mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4 Creating IR device irrcv0 I tried 2.6.32 kernel which worked before, now I'm using 2.6.33-rc1 where I had to comment out #include the from the v4l-dvb/v4l/config-compat.h. Any ideas how to get the comfort back? ;) Regards, Aljaz -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Which modules for the VP-2033? Where is the module "mantis.ko"?
Hi Manu, the driver from http://jusst.de/hg/v4l-dvb/ compiles fine on Suse-11.1 (2.6.27.39-0.2-default). However, it does not build the module "mantis.ko", as it used to be. Where is it? A search for mantis like cd v4l-dvb-ccd0c555c680 find . -name "mantis*.ko" -> ./v4l/mantis_core.ko shows up just the mantis_core.ko. Which modules I'm supposed to load for the VP-2033? Ciao Ruediger -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html