On 12/10/15 20:19, Tony Lindgren wrote:
> * Ben Dooks <ben.do...@codethink.co.uk> [151012 11:22]:
>> On 12/10/15 18:45, Tony Lindgren wrote:
>>> * Ben Dooks <ben.do...@codethink.co.uk> [151012 10:38]:
>>>> The AM3715 OHCI controller will not function wi
On 13/10/15 09:45, Roger Quadros wrote:
> Ben,
>
> On 13/10/15 11:23, Ben Dooks wrote:
>> On 12/10/15 20:19, Tony Lindgren wrote:
>>> * Ben Dooks <ben.do...@codethink.co.uk> [151012 11:22]:
>>>> On 12/10/15 18:45, Tony Lindgren wrote:
>>>>&
that if no EHCI ports are signalled
then the 120m_fclk should be enabled.
We have found no information about why this is necessary, but
it is suspected the EHCI controller does not complete the initial
reset sequence and therefore does not hand control of the USB
port back.
Signed-off-by: Ben
On 12/10/15 18:45, Tony Lindgren wrote:
> * Ben Dooks <ben.do...@codethink.co.uk> [151012 10:38]:
>> The AM3715 OHCI controller will not function without the EHCI
>> unit's 120m fclk being enabled. If all the ports in the system
>> are set to OHCI then the 120
On 02/10/15 07:07, Tero Kristo wrote:
> On 10/02/2015 03:15 AM, Stephen Boyd wrote:
>> On 09/29, Ben Dooks wrote:
>>> On the OMAP AM3517 platform the uart4_ick gets registered
>>> twice, causing any power managment to /dev/ttyO3 to fail
>>> when trying to wak
[] LR is at _raw_spin_unlock_irqrestore+0x30/0x5c
Cc: sta...@vger.kernel.org
Cc: mturque...@baylibre.com
Cc: sb...@codeaurora.org
Cc: linux-...@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: t-kri...@ti.com
Cc: linux-ker...@lists.codethink.co.uk
Signed-off-by: Ben Dooks <ben
On 25/09/15 06:42, Tero Kristo wrote:
> On 09/23/2015 08:30 PM, Tony Lindgren wrote:
>> * Ben Dooks <ben.do...@codethink.co.uk> [150923 07:53]:
>>> On the OMAP AM3517 platform the uart4_ick gets registered
>>> twice, causing any power managment to /dev/ttyO
On 22/05/15 14:50, Felipe Balbi wrote:
> Hi,
>
> On Fri, May 22, 2015 at 11:04:33AM +0300, Ben Dooks wrote:
>> I am trying to get the full-speed USB host working on an custom
>> AM3517 device with the 3.18.12 kernel. The hardware works (a
>> 2.6.37 kernel has been use
[] LR is at _raw_spin_unlock_irqrestore+0x30/0x5c
Signed-off-by: Ben Dooks <ben.do...@codethink.co.uk>
---
drivers/clk/ti/clk-3xxx.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 5e12f32..2e7ef1f 100644
--- a/drivers/clk/ti/clk-
/proc-v7-2level.S
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo
On 22/05/15 23:13, Ben Dooks wrote:
On 22/05/15 16:50, Felipe Balbi wrote:
Hi,
On Fri, May 22, 2015 at 11:04:33AM +0300, Ben Dooks wrote:
I am trying to get the full-speed USB host working on an custom
AM3517 device with the 3.18.12 kernel. The hardware works (a
2.6.37 kernel has been used
[ 77.849913] usb usb1: SerialNumber: 48064400.ohci
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 22/05/15 16:50, Felipe Balbi wrote:
Hi,
On Fri, May 22, 2015 at 11:04:33AM +0300, Ben Dooks wrote:
I am trying to get the full-speed USB host working on an custom
AM3517 device with the 3.18.12 kernel. The hardware works (a
2.6.37 kernel
-in to the support.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More
controller
that select between multiply PHY.
No, it's not the case.
There is an interesting case, the USB3 shares a PHY with a SATA
and the PCIE and SATA also share a PHY on the R8A7790.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer
On 10/04/14 12:14, David Laight wrote:
From: Ben Dooks
On 10/04/14 11:49, Sergei Shtylyov wrote:
On 10-04-2014 13:20, David Laight wrote:
It doesn't do any pin muxing. It switches SoC internal USB
signals between
USB controllers. The pins remain the same.
Doesn't something like
service ID
I think you should save r12 in the call.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord
On Wed, Feb 08, 2012 at 01:18:21PM +0200, Luciano Coelho wrote:
Since commit 6145197 (i2c: OMAP: Add DT support for i2c controller),
building i2c_omap.c breaks if CONFIG_OF is not set:
drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe':
drivers/i2c/busses/i2c-omap.c:1021: error:
On Tue, Jan 10, 2012 at 03:36:40PM +0100, Jean Delvare wrote:
This will ensure that the right people and lists are notified when
these drivers are modified.
sounds like a good idea.
Signed-off-by: Jean Delvare kh...@linux-fr.org
Cc: Tony Lindgren t...@atomide.com
Cc: Sekhar Nori
--
To unsubscribe from this list: send the line unsubscribe linux-i2c in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada
/i2c/omap-i2c.txt
--
To unsubscribe from this list: send the line unsubscribe linux-i2c in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large
On Mon, Sep 26, 2011 at 03:30:50PM -0700, Kevin Hilman wrote:
ping
On 09/06/2011 03:31 PM, Kevin Hilman wrote:
Hi Ben,
On 08/23/2011 05:10 PM, Kevin Hilman wrote:
Ben,
Here's one more I2C cleanup series for v3.2.
It applies on top of my for_3.2/i2c-fixes branch just submitted.
deletions(-)
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info
On Tue, Jul 05, 2011 at 05:01:01PM -0700, Kevin Hilman wrote:
Shubhrajyoti D shubhrajy...@ti.com writes:
Currently the fifo depth is set to zero for OMAP4 which disables
the FIFO usage. This patch enables the FIFO usage for I2C transactions
on OMAP4 also.
Tested on omap4430 and 3430.
On Tue, Jul 05, 2011 at 02:50:46PM +0530, Shubhrajyoti D wrote:
Currently the OMAP4 doesnot hit device off still the
driver may have support for it.Adding support for the
same.
Signed-off-by: Shubhrajyoti D shubhrajy...@ti.com
I guess since the previous set has been taken by Kevin
then
via the OMAP tree if at all possible so we can properly handle the
conflicts.
Do you mind dropping it from your next-i2c so we can merge it via
linux-omap (with your Ack.)
Yes, and if you could indicate all the other omap i2c patches and I'll
add my ack to yours.
Acked-by: Ben Dooks ben-li
-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
://vger.kernel.org/majordomo-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More
majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord
the couple of fixes I've got and send them to Linus
at the end of the weekend.
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body
://vger.kernel.org/majordomo-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo
of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Dooks, b...@fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
--
To unsubscribe from this list: send the line unsubscribe
...@deeprootsystems.com
Cc: Rajendra Nayak rna...@ti.com
Cc: Ben Dooks ben-...@fluff.org
---
arch/arm/mach-omap1/clock_data.c |6 +++---
arch/arm/mach-omap2/clock2420_data.c |8
arch/arm/mach-omap2/clock2430_data.c |8
arch/arm/mach-omap2/clock3xxx_data.c | 12
.
Signed-off-by: Benoit Cousson b-cous...@ti.com
c: Paul Walmsley p...@pwsan.com
Cc: Kevin Hilman khil...@deeprootsystems.com
Cc: Rajendra Nayak rna...@ti.com
Cc: Ben Dooks ben-...@fluff.org
Acked-by: Ben Dooks ben-li...@fluff.org
---
arch/arm/mach-omap1/clock_data.c |6
On Thu, Dec 09, 2010 at 10:18:48PM +, aaro.koski...@nokia.com wrote:
Hi,
Kevin Hilman [khil...@deeprootsystems.com]:
Ben Dooks ben-...@fluff.org writes:
Renaming stuff like this is going to have an impact on the userspace
as anyone looking through /sys's driver heirarchy is going
On Thu, Dec 09, 2010 at 10:18:48PM +, aaro.koski...@nokia.com wrote:
Hi,
Kevin Hilman [khil...@deeprootsystems.com]:
Ben Dooks ben-...@fluff.org writes:
Renaming stuff like this is going to have an impact on the userspace
as anyone looking through /sys's driver heirarchy is going
On Thu, Nov 18, 2010 at 12:04:20PM +0200, Samu Onkalo wrote:
Ordinary I2C read consist of two messages. First a write operation
to tell register address and then read operation to get data.
CPU wake up latency is set and removed twice in read case.
Set latency requirement before the message
On Thu, Oct 07, 2010 at 10:37:03AM -0700, Kevin Hilman wrote:
Ben Dooks ben-...@fluff.org writes:
[...]
As such, I should really go and read up all about this new runtime-pm
and hwmod stuff before further commentign on the changes.
ping
From the drivers perspective, you don't neet
On Tue, Sep 28, 2010 at 12:29:01PM +0530, Nayak, Rajendra wrote:
snip...
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -356,6 +333,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
unsigned long fclk_rate = 1200;
unsigned long timeout;
On Tue, Sep 21, 2010 at 07:37:16PM +0530, Rajendra Nayak wrote:
This patch converts the i2c driver to use PM runtime apis
Signed-off-by: Rajendra Nayak rna...@ti.com
Cc: Kevin Hilman khil...@deeprootsystems.com
Cc: Paul Walmsley p...@pwsan.com
---
drivers/i2c/busses/i2c-omap.c | 67
access ready) statuses set during the tranfer of the last
message
the bus was put to idle while still busy.
This caused bus to timeout.
Signed-off-by: Mathias Nyman mathias.ny...@nokia.com
adding linux-i2c and Ben Dooks to Cc list.
Ben, can you please take
On 06/09/10 04:40, Marek Vasut wrote:
Dne Ne 5. září 2010 22:30:00 tarek attia napsal(a):
Hi all,
Did anyone try the cpufreq on the mini2440 ? and did anyone get it
working on the board ?
Each time I do the configuration in the kernel I found nothing on the
board ,however after the
On Wed, May 05, 2010 at 08:45:53PM +0200, Sebastien Jan wrote:
Low-level functions provide 16bits words read and write capability
to ks8851 companion eeprom.
Please use the eeprom interface that was added already
Signed-off-by: Sebastien Jan s-...@ti.com
---
drivers/net/ks8851.c | 228
On Thu, May 06, 2010 at 12:20:12AM -0700, David Miller wrote:
From: Sebastien Jan s-...@ti.com
Date: Wed, 5 May 2010 20:45:53 +0200
Low-level functions provide 16bits words read and write capability
to ks8851 companion eeprom.
Signed-off-by: Sebastien Jan s-...@ti.com
Applied.
So
On Thu, Apr 15, 2010 at 03:08:16PM +0300, Aaro Koskinen wrote:
Hi,
Manjunatha GK wrote:
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C data transfer is still ongoing.
These
On Mon, Apr 19, 2010 at 12:44:22PM +0530, Manjunatha GK wrote:
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C data transfer is still ongoing.
These spurious RDR events must be ignored by
On Thu, Apr 01, 2010 at 08:53:04AM -0500, Nishanth Menon wrote:
G, Manjunath Kondaiah had written, on 04/01/2010 07:20 AM, the following:
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C
On Sun, Mar 07, 2010 at 10:59:01PM +, Ben Dooks wrote:
On Sun, Mar 07, 2010 at 09:47:58AM -0800, Cory Maccarrone wrote:
From: Marek Belisko marek.beli...@open-nandra.com
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses
-off-by: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Kevin Hilman khil...@deeprootsystems.com
Reviewed-by: Paul Walmsley p...@pwsan.com
Reviewed-by: Tony Lindgren t...@atomide.com
Cc: Ben Dooks ben-li...@fluff.org
Cc: Cory Maccarrone darkstar6...@gmail.com
---
drivers/i2c/busses/i2c
On Sun, Mar 07, 2010 at 09:47:58AM -0800, Cory Maccarrone wrote:
From: Marek Belisko marek.beli...@open-nandra.com
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver. To resolve
this, a bit shift is
On Thu, Jan 28, 2010 at 10:15:32AM +0900, Kukjin Kim wrote:
This patch adds ARM_L1_CACHE_SHIFT_6 into arch/arm/Kconfig. Basically,
ARM L1 cache line size is 32Bytes. Therefore, whenever new ARCH which
has 64Bytes L1 cache line size is added, have to set ARM_L1_CACHE_SHIFT
to 6. That is, have
On Wed, Jan 27, 2010 at 11:32:24AM -0800, adhar...@codeaurora.org wrote:
From: Abhijeet Dharmapurikar adhar...@quicinc.com
Few fixes and improvements to arch/arm/common/gic.c file.
both ARM and GIC in the title should be all in capitals, they are
abbreviations of something longer.
I think it
Ben Gamari wrote:
Bcc:
Subject: GPIO chip select support in omap2_mcspi driver
Hey,
Recently I have been looking to use a BeagleBoard to drive several
serial ADCs and DACs in a data acquisition and analysis setup. Unfortunately,
the
BeagleBoard is severely limited by the number of SPI
On Sat, Dec 05, 2009 at 11:14:08PM -0800, Cory Maccarrone wrote:
The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices. However, OMAP730/850 based
devices use a 16-bit register size.
This change modifies the driver to perform a runtime CPU type
Syed Rafiuddin wrote:
From: Syed Rafiuddin rafiuddin.s...@ti.com
This patch Adds Keypad support on OMAP4.And adds
OMAP4 register addresses and configures them for OMAP4.
[SNIP]
Subjects are considered useful, please supply at-least semi
meaningful subject next time!
--
To unsubscribe from
On Tue, Aug 18, 2009 at 03:35:31PM +0530, Syed Rafiuddin wrote:
Ben,
On Fri, Jul 24, 2009 at 04:40:02PM +0530, Syed Rafiuddin wrote:
Hi Ben,
This patch adds OMAP4 support to the I2C driver. All I2C register
addresses are different
between
OMAP1/2/3 and OMAP4. In order to not
On Thu, Aug 20, 2009 at 11:21:13AM -0500, Moiz Sonasath wrote:
This patch includes the following fixes:
-Fix I2C status ACK
-ACK pending [R/X]DR and [R/X]RDY interrupts in the error/completeion path
-Enable workaround for Errata 1.153 based on I2C IP block
ok, will add these to my fixes tree.
On Tue, Jul 21, 2009 at 04:09:03PM -0700, Kevin Hilman wrote:
From: Rajendra Nayak rna...@ti.com
Because of OMAP off-mode, powerdomain can go off when I2C is idle.
Save enough state, and do a re-init for each transfer.
Additional save/restore state added by Jagadeesh Bhaskar Pakaravoor
On Tue, Jul 21, 2009 at 10:13:20AM -0500, Sonasath, Moiz wrote:
This patch includes the following:
- Bug in reading the RXSTAT/TXSTAT values from I2C_BUFFSTAT
- In case of a NACK|ARDY|AL interrupts return from the ISR
- OMAP3430 silicon errata 1.153
hi, in future it would be better to
On Fri, Jul 24, 2009 at 04:40:02PM +0530, Syed Rafiuddin wrote:
Hi Ben,
This patch adds OMAP4 support to the I2C driver. All I2C register addresses
are different between
OMAP1/2/3 and OMAP4. In order to not have #ifdef's at various places in
code, as well as to
support multi-OMAP
On Tue, Jul 21, 2009 at 10:14:06AM -0500, Sonasath, Moiz wrote:
Fix bug in reading the I2C_BUFFSTAT register for getting byte count on RX/TX
interrupt.
On Interrupt: I2C_STAT[RDR],
read 'RXSTAT' from I2C_BUFFSTAT[8-13]
On Interrupt: I2C_STAT[XDR]
read 'TXSTAT' from
-by: Russell King rmk+ker...@arm.linux.org.uk
The remainder look sane to me, but you'll have to seek acks from the
individual platform maintainer(s).
Ack for plat-s3c64xx/pm.c:
Acked-by: Ben Dooks ben-li...@fluff.org
--
Ben Dooks, Software Engineer, Simtec Electronics
http://www.simtec.co.uk
On Fri, Jun 26, 2009 at 09:25:40AM +0300, Tony Lindgren wrote:
Hi all,
Last week I posted some more omap io.h clean-up patches to the linux-omap
list [1], and started looking at what it would take to reclaim lost address
space on top of the io.h clean-up patches.
Looks like we should be
On Fri, Mar 06, 2009 at 03:34:54PM +0200, Ari Kauppi wrote:
I have observed some Spurious IRQ's for I2C1 when all kernel hacking options
(and thus LOCKDEP) are disabled.
Applying Richard Woodruff's 'I2C bug fixes for L-O and L-Z' seems to help
but IRQF_DISABLED is needed for proper
...@vger.kernel.org] On Behalf Of Pakaravoor, Jagadeesh
Sent: Friday, January 23, 2009 2:19 PM
To: linux-...@vger.kernel.org
Cc: linux-omap@vger.kernel.org; Ben Dooks
Subject: [PATCH] I2C: OMAP: Add missing wakeup events
From: Jagadeesh Bhaskar Pakaravoor j-pakarav...@ti.com
Include wake up events
On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote:
From: Paul Walmsley p...@pwsan.com
i2c-omap discriminates only between revision 1 or greater than
revision 1. A following patch introduces code that must also
discriminate between rev2.x, rev3.6, and rev3.12 controllers.
On Tue, Dec 16, 2008 at 09:59:59PM +, Ben Dooks wrote:
On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote:
From: Paul Walmsley p...@pwsan.com
i2c-omap discriminates only between revision 1 or greater than
revision 1. A following patch introduces code that must also
On Sat, Oct 18, 2008 at 12:09:55AM +0300, Felipe Balbi wrote:
up to 1000mhz it's Fast Mode+, not highspeed.
mill-hz? 1MHz or 1000kHz.
Signed-off-by: Felipe Balbi [EMAIL PROTECTED]
---
drivers/i2c/busses/i2c-omap.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
On Thu, Sep 25, 2008 at 10:53:47AM +0300, Tony Lindgren wrote:
From: Jarkko Nikula [EMAIL PROTECTED]
If there is a signal pending and wait_for_completion_interruptible_timeout
terminates with -ERESTARTSYS, we return and disable the i2c clocks in
omap_i2c_xfer.
If we terminate before
On Thu, Sep 25, 2008 at 10:53:48AM +0300, Tony Lindgren wrote:
From: Paul Walmsley [EMAIL PROTECTED]
omap_i2c_idle() sets an internal flag, dev-idle, instructing its
ISR to decline interrupts. It sets this flag before it actually masks
the interrupts on the I2C controller. This is
On Thu, Sep 25, 2008 at 10:53:49AM +0300, Tony Lindgren wrote:
From: Syed Mohammed Khasim [EMAIL PROTECTED]
Omap2430 has additional support for high-speed I2C.
This patch moves I2C speed parameter (from module) to platform data.
Also added basic High Speed support based on I2C bus speed.
On Thu, Sep 25, 2008 at 10:53:50AM +0300, Tony Lindgren wrote:
From: Nishanth Menon [EMAIL PROTECTED]
Based on an earlier patch from Nishant Menon:
- Transfers can use FIFO on FIFO capable devices
- Prevents errors for HSI2C if FIFO is not used
- Implemented errenous handling of STT-STP
On Thu, Sep 25, 2008 at 10:53:51AM +0300, Tony Lindgren wrote:
From: Chandra shekhar [EMAIL PROTECTED]
Not very informative description in here. At lease you could have
copied the subject?
Signed-off-by: chandra shekhar [EMAIL PROTECTED]
Signed-off-by: Tony Lindgren [EMAIL PROTECTED]
---
On Thu, Sep 25, 2008 at 10:53:53AM +0300, Tony Lindgren wrote:
From: Paul Walmsley [EMAIL PROTECTED]
Skip compiling OMAP15xx I2C ISR for non-OMAP15xx builds. Saves 400 bytes
of text for most OMAP builds.
you've sneaked in __devinit/__devexit changes into this patch,
I'm going to put my foot
On Thu, Sep 25, 2008 at 10:53:54AM +0300, Tony Lindgren wrote:
Minor checkpatch and formatting clean-up. Also update copyrights.
looks ok, assuming it doesn't get broken by any changes
from the review comments i've made earlier in the series.
Signed-off-by: Tony Lindgren [EMAIL PROTECTED]
On Mon, Aug 04, 2008 at 05:40:57PM -0600, Paul Walmsley wrote:
Add the MT_MEMORY_STRONGLY_ORDERED memory type for ARM strongly ordered
memory.
This is used on OMAP3 for on-board SRAM. On OMAP, SRAM is used for code
that changes the SDRAM controller's clock, temporarily blocking access to
On Tue, Jul 22, 2008 at 04:37:42PM +0300, Riku Voipio wrote:
On Tue, Jul 22, 2008 at 07:52:44AM -0500, Felipe Balbi wrote:
On Tue, 22 Jul 2008 15:47:43 +0300, Riku Voipio [EMAIL PROTECTED] wrote:
Hmm. I think it would be better to avoid calling the probe
in first place. git diff made
77 matches
Mail list logo
