Date: Sun, 13 Aug 2000 17:35:22 +0200
From: Hubert Tonneau [EMAIL PROTECTED]
This a report about real production experiment using both Linux
software RAID and a Mylex hardware RAID controler (real production
tend to be even harder than tests, even on a lower load, since
more
, since we are not going to use it any more.
The above "bad tag" message covers a multitude of sins, sometimes including
drives that become catatonic after a SCSI bus reset.
* DAC960 RAID Driver Version 2.2.4 of 23 August 1999 *
Copyright 1998-1999 by Leonard N. Zubkoff [EMAIL
From: "List User" [EMAIL PROTECTED]
Date: Wed, 19 Apr 2000 20:03:01 -0500
I was wondering if anyone here knew the status on the drivers for the
Mylex ExtremeRaid 2000 card. Are they in beta yet?
In the next 1-2 months I'm going to need a new raid card and could really
use
Date: Sun, 9 Apr 2000 00:17:51 -0400 (EDT)
From: [EMAIL PROTECTED]
Is this true even for different classes of Mylex cards? i.e. Can a system
running an AcceleRAID 250 be upgraded to an ExtremeRAID (or vice versa)
simply by replacing the RAID card without having to rebuild/reformat the
Date: Fri, 7 Apr 2000 13:46:03 -0300 (EST)
From: Christian Robottom Reis [EMAIL PROTECTED]
Just a short note to aid me in my recovery here: can I remove the disks
from a working array, reset the board configuration, put them back again,
and rebuild the configuration - with no problem?
Date: Fri, 7 Apr 2000 19:11:04 -0300 (EST)
From: Christian Robottom Reis [EMAIL PROTECTED]
Well, I erased the config data, reflashed everything (and included a flash
update for the AstorII chassis backplane we were using) and am now in the
process of bringing back my backup
Date: Fri, 7 Apr 2000 12:27:39 -0300 (EST)
From: Christian Robottom Reis [EMAIL PROTECTED]
I'm trying to reflash the controller roms ATM and wondering what went
wrong. I've been sitting here for a couple of hours with no sleep. :-) If
this works, I'm starting to believe the firmware
Date: Wed, 1 Mar 2000 13:44:46 -0300 (BRT)
From: Christian Robottom Reis [EMAIL PROTECTED]
So my numbers aren't all that bad?
I haven't tested a DAC960PG in quite some time, but your numbers didn't look
too bad.
Can I change the controller for another Mylex model and trust I won't
Date: Tue, 29 Feb 2000 15:41:23 -0500
From: James Manning [EMAIL PROTECTED]
[ Tuesday, February 29, 2000 ] Christian Robottom Reis wrote:
/proc/rd/ relevant information:
* DAC960 RAID Driver Version 2.2.4 of 23 August 1999 *
Copyright 1998-1999 by Leonard N
Date: Tue, 11 Jan 2000 14:07:17 -0800
From: "Jon Doyle" [EMAIL PROTECTED]
Has anyone used the new ExtremeRAID or AccelRAID 352 on Linux
with the DAC960 drivers? I run SuSE 6.3 on the Ultra2 and UW
DAC, AccelRAD 250, and ExtremeRAID 1164, but thought I might
ask before diving into
messages:
* DAC960 RAID Driver Version 2.2.4 of 23 August 1999 *
Copyright 1998-1999 by Leonard N. Zubkoff [EMAIL PROTECTED]
Configuring Mylex DAC1164P PCI RAID Controller
Firmware Version: 5.07-0-79, Channels: 2, Memory Size: 16MB
PCI Bus: 2, Device: 8, Function: 0
Date: Wed, 13 Oct 1999 19:14:46 +0200
From: Vedad Kajtaz [EMAIL PROTECTED]
Hello,
i've purchased a DAC960 card, and i'm succesfully running it in raid1
mode with two scsi disks in
hot swappable bays. The doc says it is possible to use a partition
/dev/rd/cXdXpX as root disk, but
From: "Kent Nilsen" [EMAIL PROTECTED]
Date: Wed, 8 Sep 1999 13:48:11 +0200
I've also got some questions concerning the Mylex 960:
I've got a JBOD box with 5 Seagate Elite23 disks, which is connected to a
Mylex DAC960 PG controller (channel 0). On channel 2 (internal) I've got 5
Date: Wed, 18 Aug 1999 09:18:00 -0400 (EDT)
From: James Manning [EMAIL PROTECTED]
FWIW, the eXtremeRAID 1100 cards are 64-bit PCI only (as are the ServeRAID
cards in my previous testing). Other testing I've done has shown many
situations where even our quad P6/200 machines (PC
From: "Kent Nilsen" [EMAIL PROTECTED]
Date: Wed, 14 Jul 1999 08:42:39 +0200
Installing this card in a Linux server, but disk initialization is
slw. Has anyone had any experience with it? It's been working for 9 hours
now, increasing the %complete by one very slowly...
The
Date: Sat, 12 Jun 1999 12:42:12 +0100
From: Joao Rochate [EMAIL PROTECTED]
* If I have a hardware RAID system and server fails (also the RAID
controler) can I just move the disks to another server with the same RAID
card model and have the system working back again?
This
Date: Wed, 3 Mar 1999 09:50:42 -0800 (PST)
From: Chance Reschke [EMAIL PROTECTED]
---Sequential Output ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec
From: [EMAIL PROTECTED]
Date: Wed, 17 Feb 1999 08:29:40 -0500
Hi folks,
This could make a pretty good howto if it has a happy ending.
I got a mylex dac960 card to drive an external rack with 5-9gb scsi
drives. RH5.2 (2.0.36) already is installed, on an ide hard drive.
18 matches
Mail list logo