Hi Laurent
> > > I tried to reproduce the problem, starting with drm-next which seems to
> > > work
> > > fine, moving to renesas-drivers-2018-10-09-v4.19-rc7 which also didn't
> > > exhibit any issue. I then used your kernel configuration, and got a
> > > WARN_ON
> > > \o/
> >
> >
Hi Simon
> > rsnd sound driver will handle SSIU from v4.21 via DT.
> > Of course it is keeping compatibility, thus, no SSIU settings
> > is no problem.
> >
> > SSIU handles BUSIFn, but rsnd driver had been assumed only BUSIF0 was used.
> > Thus, SSIU / BUSIF0 was attached via SSI
Hi Simon
> > These patches adds sound support for KingFisher.
> > We can enable it on top of v4.20-rc1, but, it is not stable.
> > We need this patch (= from ASoC for-v4.21 branch) to be stable it.
> >
> > 223bc10b84970fd772c105b550beeef3ac3502be
> > ("ASoC: pcm3168a: remove read-only
Hi Wolfram,
CC Chris Paterson
On Sun, Oct 28, 2018 at 10:25 PM Wolfram Sang
wrote:
> During our SDHI hackathon, we found that Lager was the only Gen2 board
> having issues with a stubborn SD card. The issue went away when setting
> TDSEL to the expected value mentioned in the H2 documentation
On Sun, Oct 28, 2018 at 10:25 PM Wolfram Sang
wrote:
> Documentation says that some bits in TDSEL must be set (ch 5.3.35 in
> R-Car E2 v0.5). However, the reset value of the register is 0, so
> software has to do it. Add this to the kernel driver to ensure this is
> really done independent of
On Sun, Oct 28, 2018 at 10:25 PM Wolfram Sang
wrote:
> Documentation says that some bits in TDSEL must be set (ch 5.3.39 in R-Car H2
> v0.91). However, the reset value of the register is 0, so software has to do
> it. Add this to the kernel driver to ensure this is really done independent of
>
Dear All,
this series includes all that is necessary to add QSPI flash
support to the iwg23s board powered by the RZ/G1C SoC (a.k.a.
r8a77470). The second version of this series is to address
a comment made by both Simon and Geert on one of the patches.
This series applies on top of
This commit adds QSPI flash support to the iwg23s board specific
device tree.
Signed-off-by: Fabrizio Castro
---
v1->v2:
* No Change
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 26 ++
1 file changed, 26 insertions(+)
diff --git
The is25lp016d is found on the iwg23s from iWave, therefore
add driver support for it so that we can upstream board support.
Signed-off-by: Fabrizio Castro
---
v1->v2:
* No change
drivers/mtd/spi-nor/spi-nor.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/spi-nor/spi-nor.c
Add QSPI[01] support to the RZ/G1C SoC specific device tree.
Signed-off-by: Fabrizio Castro
---
v1->v2:
* Removed aliases
arch/arm/boot/dts/r8a77470.dtsi | 32
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi
Add pin, mux and functions definitions for VIN4 and VIN5 for R-Car E3.
Signed-off-by: Jacopo Mondi
---
v4 -> v5:
- Use new variadic macro: this time for real as reported by Simon
- s/union vin_data/union vin_data16/ for VIN5 pins and mux as suggested by Geert
- add vin4_data18_[a|b] pins
- fix
Versioned VIN groups can appear on different sets of pins. Use of the
VIN_DATA_PIN_GROUP macro fix naming of said groups through an optional
'version' argument.
Use the 'version' argument for said macro to fix naming of versioned
groups for R-Car V2H R8A7792 SoC.
Fixes: 7dd74bb1f058 ("pinctrl:
Versioned VIN groups can appear on different sets of pins. Use of the
VIN_DATA_PIN_GROUP macro fix naming of said groups through an optional
'version' argument.
Use the 'version' argument for said macro to fix naming of versioned
groups for R-Car H3 R8A7795 SoC.
Fixes: 9942a5b52990 ("pinctrl:
Hi Geert, Simon,
this version uses the new variadic macro VIN_DATA_PIN_GROUP as v4 (this
for real in [3/6].
Refactoring of users of the macro old version have broken out to single
patches, comments on M3-N and E3 VIN PFC groups have been incorporated.
Quite a few changes in M3-N and E3 VIN
Versioned VIN groups can appear on different sets of pins. Using the
VIN_DATA_PIN_GROUP macro now supports proper naming of said groups through
an optional 'version' argument.
Use the 'version' argument for said macro to fix naming of versioned
groups for R-Car M3-W R8A7796 SoC.
Fixes:
VIN data groups may appear on different sets of pins, usually named
"vinX_data_[a|b]". The existing VIN_DATA_PIN_GROUP() does not support
appending the '_a' or '_b' suffix, leading to the definition of group
names not consistent with the ones defined using the SH_PFC_PIN_GROUP()
macro.
Fix this
The VIN4 and VIN5 interfaces supports parallel video input.
Add pin, mux and functions definitions for VIN4 and VIN5 for R-Car M3-N.
Reviewed-by: Ulrich Hecht
Signed-off-by: Jacopo Mondi
---
v4 -> v5:
- Add definitions for 10, 12 and 20 pin groups for VIN4 as suggested by Geert
- Add
Hi Morimoto-san
with the TDM Split patch-set you sent earlier in community,
together with this DTS change set,
I am able to test TDM Split mode,
just some minor findings.
On 2018/11/08 10:59, Kuninori Morimoto wrote:
From: Kuninori Morimoto
KingFisher has pcm3168 sound codec. This patch
On Thu, Nov 08, 2018 at 01:25:45PM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Thu, Nov 8, 2018 at 12:52 PM Simon Horman wrote:
> > On Thu, Nov 08, 2018 at 11:27:31AM +0100, Geert Uytterhoeven wrote:
> > > On Thu, Nov 8, 2018 at 11:22 AM Simon Horman wrote:
> > > > On Wed, Nov 07, 2018
On Tue, Nov 6, 2018 at 7:53 PM Sergei Shtylyov
wrote:
> From: Dmitry Shifrin
>
> Add the QSPI{0|1} pins/groups/functions to the R8A77970 PFC driver.
>
> [Sergei: ported to the upstream driver, fixed up the swapped QSPI0 SPCLK/
> SSL pins, fixed up the comments, moved the QSPI
On Thu, Nov 08, 2018 at 01:01:08PM +0100, Geert Uytterhoeven wrote:
> On Mon, Nov 5, 2018 at 10:39 PM Marek Vasut wrote:
> > Subject: [PATCH] arm64: dts: r8a77990: ebisu: Add serial console pins
>
> arm64: dts: renesas: r8a77990: ebisu: Add serial console pins
Thanks, fixed.
On Wed, 07 Nov 2018, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven
> ---
> include/linux/mfd/tmio.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow
On Thu, Nov 08, 2018 at 01:00:11PM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut wrote:
> > Subject: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device
> > nodes
>
> arm64: dts: renesas: r8a77990: ebisu: Add and enable SDHI device nodes
Thanks,
On Mon, Nov 5, 2018 at 10:40 PM Marek Vasut wrote:
> From: Takeshi Kihara
>
> This patch supports the {get,set}_io_voltage operations of SDHI.
>
> This operates the IOCTRL30 register on the R8A77990 SoC and makes
> 1.8V/3.3V signal voltage switch possible.
>
> Signed-off-by: Takeshi Kihara
>
On Mon, Nov 5, 2018 at 10:40 PM Marek Vasut wrote:
> From: Takeshi Kihara
>
> This patch adds SDHI{0,1,3} pins, groups and functions to the R8A77990
> SoC.
>
> Signed-off-by: Takeshi Kihara
> Signed-off-by: Marek Vasut
Reviewed-by: Geert Uytterhoeven
i.e. will queue in sh-pfc-for-v4.21.
Hi Jacopo,
On Wed, Nov 7, 2018 at 11:56 AM jacopo mondi wrote:
> On Wed, Nov 07, 2018 at 11:34:50AM +0100, Simon Horman wrote:
> > On Tue, Nov 06, 2018 at 11:35:33AM +0100, Jacopo Mondi wrote:
> > > Add pin, mux and functions definitions for VIN4 and VIN5 for R-Car E3.
> > >
> > > Signed-off-by:
On Tue, Nov 6, 2018 at 11:35 AM Jacopo Mondi wrote:
> The VIN4 and VIN5 interfaces supports parallel video input.
> Add pin, mux and functions definitions for VIN4 and VIN5 for R-Car M3-N.
>
> Reviewed-by: Ulrich Hecht
> Signed-off-by: Jacopo Mondi
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
Hi Simon,
On Thu, Nov 8, 2018 at 12:52 PM Simon Horman wrote:
> On Thu, Nov 08, 2018 at 11:27:31AM +0100, Geert Uytterhoeven wrote:
> > On Thu, Nov 8, 2018 at 11:22 AM Simon Horman wrote:
> > > On Wed, Nov 07, 2018 at 01:30:10PM +0100, Simon Horman wrote:
> > > > On Mon, Nov 05, 2018 at
On Tue, Aug 14, 2018 at 01:34:02PM +0100, Fabrizio Castro wrote:
> RZ/G2M (R8A774A1) SoC also has the R-Car Gen3 compatible SCIF and
> HSCIF ports, so document the SoC specific bindings. While at it,
> update the RZ/G1 and RZ/G2 family specific strings description as
> outdated.
>
>
Hi Jacopo,
On Tue, Nov 6, 2018 at 11:35 AM Jacopo Mondi wrote:
> The VIN4 and VIN5 interfaces supports parallel video input.
> Add pin, mux and functions definitions for VIN4 and VIN5 for R-Car M3-N.
>
> Reviewed-by: Ulrich Hecht
> Signed-off-by: Jacopo Mondi
Thanks for your patch!
> ---
t tree
> >>
> >> Commit 3e8f76c61511f3c4f0c25c36172605d6aeaec37c seems to be missing the
> >> arch/arm64/boot/dts/renesas/r8a77990.dtsi | 36 +
> >> part from
> >> [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device nodes
> >> thus the error.
> >
> > Sorry about that, will fix ASAP.
>
> No problem, thanks!
Should be fixed in renesas-next-20181108-v4.20-rc1.
On Tue, Nov 6, 2018 at 9:46 PM Marek Vasut wrote:
> Subject: [PATCH V3] arm64: dts: r8a77990: ebisu: Add and enable SDHI device
> nodes
arm64: dts: renesas: r8a77990: ebisu: Add and enable SDHI device nodes
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's
On Mon, Nov 5, 2018 at 10:39 PM Marek Vasut wrote:
> Subject: [PATCH] arm64: dts: r8a77990: ebisu: Add serial console pins
arm64: dts: renesas: r8a77990: ebisu: Add serial console pins
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32
On Thu, Nov 08, 2018 at 11:27:31AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Thu, Nov 8, 2018 at 11:22 AM Simon Horman wrote:
> > On Wed, Nov 07, 2018 at 01:30:10PM +0100, Simon Horman wrote:
> > > On Mon, Nov 05, 2018 at 09:52:48AM +0100, Geert Uytterhoeven wrote:
> > > > On Sat, Oct
On Wed, Nov 07, 2018 at 02:37:31PM +0100, Geert Uytterhoeven wrote:
> While ptr and port both point to the uart_port structure, the former is
> the untyped pointer cookie passed to interrupt handlers.
> Use the correctly typed port variable instead, to improve type-safety.
>
> Signed-off-by:
Hi Jacopo,
On Thu, Nov 8, 2018 at 11:58 AM Geert Uytterhoeven wrote:
> On Tue, Nov 6, 2018 at 11:35 AM Jacopo Mondi
> wrote:
> > VIN data groups may appear on different sets of pins, usually named
> > "vinX_data_[a|b]". The existing VIN_DATA_PIN_GROUP() does not support
> > appending the '_a'
On Wed, Nov 07, 2018 at 02:50:01PM +0100, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Wolfram Sang
We will remove that flag somewhen in the future anyhow, but for now it
is good, me thinks.
signature.asc
Description: PGP signature
Hi Geert
On Thu, Nov 08, 2018 at 11:59:08AM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 6, 2018 at 11:35 AM Jacopo Mondi
> wrote:
> > Versioned VIN groups can appear on different sets of pins. Using the
> > VIN_DATA_PIN_GROUP macro now supports proper naming of said groups through
> > an
On Tue, Nov 6, 2018 at 11:35 AM Jacopo Mondi wrote:
> Versioned VIN groups can appear on different sets of pins. Using the
> VIN_DATA_PIN_GROUP macro now supports proper naming of said groups through
> an optional 'version' argument.
>
> Use the 'version' argument for said macro to fix naming of
Hi Jacopo,
Thanks for your patch!
On Tue, Nov 6, 2018 at 11:35 AM Jacopo Mondi wrote:
> VIN data groups may appear on different sets of pins, usually named
> "vinX_data_[a|b]". The existing VIN_DATA_PIN_GROUP() does not support
> appending the '_a' or '_b' suffix, leading to the definition of
On 11/08/2018 11:33 AM, Simon Horman wrote:
> On Wed, Nov 07, 2018 at 03:04:51PM +0100, Marek Vasut wrote:
>> On 11/07/2018 02:57 PM, kbuild test robot wrote:
>>> tree: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git
>>> arm64-dt-for-v4.21
>>> head:
On Thu, Nov 08, 2018 at 02:12:14AM +, Kuninori Morimoto wrote:
>
> Hi Simon
>
> rsnd sound driver will handle SSIU from v4.21 via DT.
> Of course it is keeping compatibility, thus, no SSIU settings
> is no problem.
>
> SSIU handles BUSIFn, but rsnd driver had been assumed only BUSIF0 was
Hi Olof,
On Wed, Nov 7, 2018 at 5:03 PM Olof Johansson wrote:
> On Wed, Nov 7, 2018 at 3:25 AM Simon Horman
> wrote:
> > * R-Car V3H (r8a77980) based Condor board
> > - Switch from EtherAVB to GEther to match offical boards
> >
> > * RZ/G2E (ra8774c0) SoC: correct documentation of part
On Thu, Nov 08, 2018 at 01:57:41AM +, Kuninori Morimoto wrote:
>
> Hi Simon
>
> These patches adds sound support for KingFisher.
> We can enable it on top of v4.20-rc1, but, it is not stable.
> We need this patch (= from ASoC for-v4.21 branch) to be stable it.
>
>
Hi Geert,
Thank you for your feedback!
> Subject: Re: [PATCH 3/4] ARM: dts: r8a77470: Add QSPI support
>
> Hi Fabrizio,
>
> On Thu, Nov 8, 2018 at 11:31 AM Fabrizio Castro
> wrote:
> > > On Thu, Nov 8, 2018 at 11:22 AM Fabrizio Castro
> > > wrote:
> > > > > From: Simon Horman
> > > > > Sent:
On Wed, Nov 07, 2018 at 12:06:43PM +, Fabrizio Castro wrote:
> From: Biju Das
>
> Adding pinctrl support for EtherAVB interface.
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
> Reviewed-by: Geert Uytterhoeven
> Signed-off-by: Fabrizio Castro
> ---
> v4.20 RC1 is out, this
On Wed, Nov 07, 2018 at 02:50:01PM +0100, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Simon Horman
> ---
> include/linux/mfd/tmio.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
>
On Wed, Nov 07, 2018 at 11:17:17AM +0100, Geert Uytterhoeven wrote:
> CONFIG_ARM_BIG_LITTLE_CPUFREQ was removed on arm64 in commit
> a7314405d83c8f95 ("cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for
> ARM64").
>
> Signed-off-by: Geert Uytterhoeven
> ---
> Not intended for upstream merge.
On Wed, Nov 07, 2018 at 11:17:18AM +0100, Geert Uytterhoeven wrote:
> Enable R-Car Gen3 PCIe PHY support, which is needed for PCIe to function
> on the Renesas Condor board.
>
> Signed-off-by: Geert Uytterhoeven
> ---
> Not intended for upstream merge.
Thanks,
This looks fine to me but I will
On Wed, Nov 07, 2018 at 06:30:13PM +0200, Laurent Pinchart wrote:
> Hi Simon,
>
> On Tuesday, 6 November 2018 16:00:35 EET Simon Horman wrote:
> > On Mon, Nov 05, 2018 at 02:12:43PM +0100, Jacopo Mondi wrote:
> > > The VIN driver bindings dictates fixed numbering for VIN endpoints
> > > connected
On Wed, Nov 07, 2018 at 08:02:17AM -0800, Olof Johansson wrote:
> On Wed, Nov 7, 2018 at 3:25 AM Simon Horman
> wrote:
> >
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these Renesas ARM based SoC fixes for v4.20.
> >
> >
> > The following changes since commit
On Wed, Nov 07, 2018 at 03:24:27PM +, Fabrizio Castro wrote:
> Now that include/dt-bindings/clock/r8a774a1-cpg-mssr.h is in Linus'
> master branch we can replace clock related magic numbers with the
> corresponding labels.
>
> Signed-off-by: Fabrizio Castro
Thanks,
This looks fine to me
On Wed, Nov 07, 2018 at 03:24:26PM +, Fabrizio Castro wrote:
> Now that include/dt-bindings/power/r8a774a1-sysc.h is in Linus'
> master branch we can replace power related magic numbers with
> the corresponding labels.
>
> Signed-off-by: Fabrizio Castro
Thanks,
This looks fine to me but I
Hi Fabrizio,
On Thu, Nov 8, 2018 at 11:31 AM Fabrizio Castro
wrote:
> > On Thu, Nov 8, 2018 at 11:22 AM Fabrizio Castro
> > wrote:
> > > > From: Simon Horman
> > > > Sent: 02 November 2018 11:50
> > > > Subject: Re: [PATCH 3/4] ARM: dts: r8a77470: Add QSPI support
> > > >
> > > > On Thu, Nov
On Wed, Nov 07, 2018 at 02:35:00PM +0100, Geert Uytterhoeven wrote:
> RZ/G2M also has 3 interrupts routed to the TSC, but the list was not
> updated to reflect this.
>
> Just drop the list, as this is the case for this TSC variant in all
> R-Car Gen3 and RZ/G2 SoCs.
>
> Fixes: be6af481f3b2d508
On Wed, Nov 07, 2018 at 03:04:51PM +0100, Marek Vasut wrote:
> On 11/07/2018 02:57 PM, kbuild test robot wrote:
> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git
> > arm64-dt-for-v4.21
> > head: 3e8f76c61511f3c4f0c25c36172605d6aeaec37c
> > commit:
Hello Geert,
Thank you for your feedback!
> Subject: Re: [PATCH 3/4] ARM: dts: r8a77470: Add QSPI support
>
> Hi Fabrizio,
>
> On Thu, Nov 8, 2018 at 11:22 AM Fabrizio Castro
> wrote:
> > > From: Simon Horman
> > > Sent: 02 November 2018 11:50
> > > Subject: Re: [PATCH 3/4] ARM: dts: r8a77470:
Hi Simon,
On Thu, Nov 8, 2018 at 11:22 AM Simon Horman wrote:
> On Wed, Nov 07, 2018 at 01:30:10PM +0100, Simon Horman wrote:
> > On Mon, Nov 05, 2018 at 09:52:48AM +0100, Geert Uytterhoeven wrote:
> > > On Sat, Oct 20, 2018 at 11:35 PM Yoshihiro Kaneko
> > > wrote:
> > > > From: Takeshi
Hi Fabrizio,
On Thu, Nov 8, 2018 at 11:22 AM Fabrizio Castro
wrote:
> > From: Simon Horman
> > Sent: 02 November 2018 11:50
> > Subject: Re: [PATCH 3/4] ARM: dts: r8a77470: Add QSPI support
> >
> > On Thu, Nov 01, 2018 at 12:35:04PM +, Fabrizio Castro wrote:
> > > Add QSPI[01] support to
Hello Simon,
Thank you for your feedback!
> From: Simon Horman
> Sent: 02 November 2018 11:50
> Subject: Re: [PATCH 3/4] ARM: dts: r8a77470: Add QSPI support
>
> On Thu, Nov 01, 2018 at 12:35:04PM +, Fabrizio Castro wrote:
> > Add QSPI[01] support to the RZ/G1C SoC specific device tree.
> >
On Wed, Nov 07, 2018 at 01:30:10PM +0100, Simon Horman wrote:
> On Mon, Nov 05, 2018 at 09:52:48AM +0100, Geert Uytterhoeven wrote:
> > Hi Kaneko-san,
> >
> > On Sat, Oct 20, 2018 at 11:35 PM Yoshihiro Kaneko
> > wrote:
> > > From: Takeshi Kihara
> > >
> > > This patch adds I2C-DVFS device
61 matches
Mail list logo