Hello,
On Thursday, May 10, 2012 11:14 AM Kukjin Kim wrote:
Marek Szyprowski wrote:
EXYNOS4_CLKGATE_BLOCK register can be used to disable the respective
multimedia block hardware planes. It acts similar to the power domains.
This patch adds transparent support for this method of gating
Hello,
On Thursday, May 10, 2012 11:36 AM Kukjin Kim wrote:
Marek Szyprowski wrote:
Hello,
This patch set adds support for Exynos DRM display subsystem for
Universal C210 and NURI boards. Exynos DRM driver has been merged to 3.3
kernel tree and provides unified and more powerful
Hello,
On Thursday, May 10, 2012 11:09 AM Kukjin Kim wrote:
Marek Szyprowski wrote:
Some bootloaders disable unused power domains, so kernel code should
read the actual state from the hardware registers instead of assuming
that their initial state is 'on'.
Signed-off-by: Marek
Hi Rafael,
On Monday, May 07, 2012 8:45 PM Rafael J. Wysocki wrote:
On Monday, May 07, 2012, Marek Szyprowski wrote:
Hi Rafael,
I'm sorry for a late reply, I was on holidays last week and just got back to
the office.
On Sunday, April 29, 2012 10:55 PM Rafael J. Wysocki wrote
Hi
On 2012-05-11 22:51, Rafael J. Wysocki wrote:
On Thursday, May 10, 2012, Rafael J. Wysocki wrote:
On Thursday, May 10, 2012, Marek Szyprowski wrote:
Hi Rafael,
On Monday, May 07, 2012 8:45 PM Rafael J. Wysocki wrote:
On Monday, May 07, 2012, Marek Szyprowski wrote:
Hi Rafael,
I'm
Hello,
On 5/14/2012 9:04 PM, Rafael J. Wysocki wrote:
On Monday, May 14, 2012, Marek Szyprowski wrote:
Hi
On 2012-05-11 22:51, Rafael J. Wysocki wrote:
On Thursday, May 10, 2012, Rafael J. Wysocki wrote:
On Thursday, May 10, 2012, Marek Szyprowski wrote:
Hi Rafael,
On Monday, May 07, 2012
drivers (s5p-fimc, s5p-mfc, s5p-tv, exynos-drm). Tested on Universal
C210 and NURI boards, but the issues were also reported for Origen
boards and others. If possible, please consider these patches as fixes
(runtime pm is broken without them) and merge to v3.5-rc line.
Best regards
Marek Szyprowski
power domain infrastructure').
Client device drivers relay on that suspend/resume behaviour, thus this
patch fixes runtime pm operation for client devices.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Reviewed-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-exynos
and create required bindings for it
instead of hardcoding the platform data and gpio numbers in mach-exynos5-dt.c
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
, but it looks they didn't get their
way to
mainline.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo
mix two methods of runtime detection. FIMD driver (s3c-fb) already
has runtime hw detection based on platform device id. Adding such detection for
exynos5 to DRM FIMD driver should not be a big issue too.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list
Add required machine definitions for I2C 0 and 1 bus controllers.
Currently no I2C device are defined yet.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |2 ++
arch/arm/mach-s5pc100
Samsung S5PC1xx SoCs are Coretex8 based, so use 64 bytes of L1 cache
line instead of the default 32 bytes.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mm/Kconfig |2 +-
1 files changed, 1 insertions(+), 1
Samsung S5PC100 SoC has LCD display controller compatible to the one
known from S3C6410 SoCs. Enable support for s3c-fb driver also on S5PC1xx
platform.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
drivers/video/Kconfig
Add CPU idle support by a call to SoC build-in power management core.
Add system reset support by a simple write to system controll register.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/cpu.c
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |2 +
arch/arm/mach-s5pc100/mach-smdkc100.c | 67 +
2 files changed, 69 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach
Samsung S5PC100 SoC has LCD display controller compatible to the one
known from S3C6410 SoCs. Enable support for s3c-fb driver also on S5PC1xx
platform.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
drivers/video/Kconfig
Samsung S5PC100 SoC has I2C controllers directly compatible to the one
known from S3C24x0 SoCs. Enable support for s3c-i2c driver also on S5PC1xx
platform.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
drivers/i2c/busses
Add support for gpiolib calls. This is based on the gpiolib implementation
from plat-s3c64xx tree.
Add support for external interrupts for GPIO H banks.
Add support for GPIO interrupts for all banks.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow
Hello,
This patch series updates Samsung S5PC100 SoC support. S5PC100 platform
core has been extended with new clocks hierarchy implementation, gpio lib,
support for external and gpio interrupts and some basics of power
management (cpu idle and system reset). Also platform helpers for
s3c
From: Kyungmin Park kyungmin.p...@samsung.com
From: Kyungmin Park kyungmin.p...@samsung.com
S5PC100 and S5PC110 GPIO registers differs in many places, rename all
previously defined registers to be S5PC100 specific.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek
From: Kyungmin Park kyungmin.p...@samsung.com
From: Kyungmin Park kyungmin.p...@samsung.com
Add required machine definitions for I2C 0 and 1 bus controllers.
Currently no I2C device are defined yet.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow
...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
drivers/i2c/busses/Kconfig |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 737335f..5b173f3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b
.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/plat-s3c/Kconfig |6 +
arch/arm/plat-s3c/include/plat/gpio-cfg.h |1 +
arch/arm/plat-s5pc1xx/Kconfig |3
Hello,
On Wednesday, November 18, 2009 12:59 AM Ben Dooks wrote:
On Tue, Nov 17, 2009 at 08:41:10AM +0100, Marek Szyprowski wrote:
Hello,
ok, series applied and pushed to git.fluff.org.
Will do a quick build test and then get on with other stuff.
Thanks. Let me know if you get any
Hello,
This preliminary patch series adds support for Samsung S5PC110 SoC.
S5PC110 belongs to S5PC1XX family (CortexA8 ARM core), but differs in
many places from the S5PC100 SoC: new memory map, different clock
hierarchy, new gpio banks and much more powerful integrated peripherals.
Such
From: Kyungmin Park kyungmin.p...@samsung.com
This patch removes all useless definitions from plat/s5pc100.h and
introduces new common plat/s5pc1xx.h include.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach
...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/cpu.c|6 ++
arch/arm/mach-s5pc100/include/mach/map.h |2 ++
.../include/plat/regs-clock.h |2 +-
.../include/plat/regs-power.h
From: Kyungmin Park kyungmin.p...@samsung.com
All device helpers that are defined in plat-s5pc1xx are S5PC100
specific. This patch moves them to mach-s5pc100 directory to make use of
newly created sub-platform support.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek
kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/include/mach/regs-fb.h | 133 ++---
arch/arm/plat-s3c/include/plat/regs-fb-v5.h | 138 ++
2 files changed, 146 insertions(+), 125 deletions
introduced, so each SoC in sub-platform
can have its own set of include files (register map, irqgpio
definitions, etc)
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/Makefile |2 +-
arch/arm/mach-s5pc100/Kconfig
Hello,
This preliminary patch series adds support for Samsung S5PC110 SoC.
S5PC110 belongs to S5PC1XX family (CortexA8 ARM core), but differs in
many places from the S5PC100 SoC: new memory map, different clock
hierarchy, new gpio banks and much more powerful integrated peripherals.
Such
From: Kyungmin Park kyungmin.p...@samsung.com
Samsung S5PC110 SoCs have UART that differs a bit from the one known
from the previous Samsung SoCs. This patch adds support for this new
driver.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow
...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |2 --
arch/arm/mach-s5pc100/Makefile |3 +++
.../clock.c = mach-s5pc100/clocks.c} |4 ++--
arch/arm/mach-s5pc100/cpu.c
-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/include/mach/regs-fb.h | 133 ++--
.../include/plat/regs-fb-v5.h} | 15 +--
2 files changed, 15 insertions(+), 133 deletions(-)
copy
...@samsung.com
Signed-off-by: Byungho Min bh...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc110/Kconfig| 17 +++
arch/arm/mach-s5pc110/Makefile | 18
arch/arm/mach-s5pc110/Makefile.boot
S5PC100 GPIOlib support has been rewriten to make it possible to reuse
most of the common code in the upcoming S5PC110 sub-platform.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/Makefile
://www.meritech.co.kr).
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc110/Kconfig |6 ++
arch/arm/mach-s5pc110/Makefile|1 +
arch/arm/mach-s5pc110/mach-smdkc110.c | 102
specifi virtual memory area is
extended to cover VIC3 register block.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Byungho Min bh...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc110/cpu.c | 10 ++
arch/arm/mach
This patch removes all useless definitions from plat/s5pc100.h and
introduces new common plat/s5pc1xx.h include.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/cpu.c |2 +-
arch/arm
-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Byungho Min bh...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc110/Kconfig| 18 +
arch/arm/mach-s5pc110/Makefile |3 +
arch/arm/mach-s5pc110/cpu.c |3 +
arch/arm
Samsung S5PC110 SoC are newer Samsung SoCs. Like S5PC100 they are based
on CortexA8 ARM CPU, but have much more powerfull integrated periperals.
This patch adds gpiolib support for S5PC110 sub-platform.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Byungho Min bh
From: Kyungmin Park kyungmin.p...@samsung.com
Add entries for the ARM S5PC100 and ARM S5PC110 architectures that are
currently being maintained by ourself.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
MAINTAINERS | 16
framework.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
select S3C_GPIO_CFG_S3C64XX
select S5P_GPIO_CFG_S5PC1XX
+ select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for any Samsung S5PC1XX device
Double entry (probably a consequence of automatic merge or so).
...
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
information is lost in such case (it would be harder to add missing
clocks to the system). Half of these defines are redundant anyway,
so maybe we should leave only *_MASK defines for informational purpose?
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list
From: Kyungmin Park kyungmin.p...@samsung.com
All includes that are common for S5PC100 and S5PC110 are moved to
plat-s5pc1xx/include/mach, so they can be used by both sub-platforms.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
From: Kyungmin Park kyungmin.p...@samsung.com
Samsung S5PC110 SoCs have UART that differs a bit from the one known
from the previous Samsung SoCs. This patch adds support for this new
driver.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow
Samsung S5PC110 SoC are newer Samsung SoCs. Like S5PC100 they are based
on CortexA8 ARM CPU, but have much more powerfull integrated periperals.
This patch adds clocks and plls definition for S5PC110 SoCs.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park
...@samsung.com
Signed-off-by: Byungho Min bh...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc110/Kconfig| 17 +++
arch/arm/mach-s5pc110/Makefile | 18
arch/arm/mach-s5pc110/Makefile.boot
-by: Byungho Min bh...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc110/Kconfig| 18 +
arch/arm/mach-s5pc110/Makefile |3 +
arch/arm/mach-s5pc110/cpu.c |3 +
arch/arm/mach-s5pc110/setup-i2c0.c | 31
to get it merged quickly? I will rebase our tree asap the mentioned
patches get merged.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info
SoCs
next-samsung-s5pc1xx - s5pc1xx cleanup (to be discussed)
next-samsung-onenand - platform patch for onenand driver (requires all
above patches)
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body
,
s5p_clk_xusbxti clock is not defined anywhere.
...
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo
-s5pc100/clock.c:47: warning: 'clk_mout_href' defined but not used
arch/arm/mach-s5pc100/clock.c:400: warning: 's5pc100_d2_0_ctrl' defined but not
used
Besides the above this patch works fine. I will post my redesigned s5pc100 patch
series in a few minutes.
Best regards
--
Marek Szyprowski
Samsung
special function value for EINT is different
on s5pc100 and s5pv210 (0x2 vs. 0xf), so hiding this behind a define is
much more convenient.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
Signed-off-by: Marek Szyprowski
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5p6440/Makefile |1 +
arch/arm/{plat-s5p = mach-s5p6440}/setup-i2c0.c |2 +-
arch/arm/mach-s5p6442/Makefile |1 +
arch
GPIOlib helpers from plat-samsung already have functions for accessing
4bit gpio banks. This patch removes the duplicated functions from
plat-s5pc1xx/gpiolib.c.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/plat
This patch moves external interrupts support code from plat-s5pc1xx to
plat-s5p and enables support for it on ARCH_S5PC100. This code can be easily
reused by S5PV210/S5PC110 and probably S5P6442.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p
This patch moves support for gpio interrupts from plat-s5pc1xx to
mach-s5pc100 directory.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/Makefile |2 +-
arch/arm/mach-s5pc100/gpio.c
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/plat
This patch moves S5PC100 SoC support to plat-s5p framework. Most
periperal support code has been already moved from plat-s5pc1xx to
mach-s5pc100.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/Kconfig
Fix incorrectly defined pixel clock value for the default framebuffer
window.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/mach-smdkc100.c |3 +--
1 files changed, 1 insertions(+), 2 deletions
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio
functionality is now supported. Gpio interrupts are disabled temporarly
and will be added later.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm
number (ok)
3. put it in driver specific platform data (ok)
4. release the gpio pin (?)
Would request_irq() work after release of that gpio pin?
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body
This patch adds common framebuffer device helpers and register defines
for S5PV210 based machines.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig |5 ++
arch/arm/mach-s5pv210
This patch adds required platform definitions to enable s3c-fb
driver. Two framebuffer windows in 480x800x16bpp mode are defined.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig |2 +
arch
(x)
+#define EINT_GPIO_3(x) S5PV210_GPH3(x)
Again, gpio.h would be much better for these.
...
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord
structures
Best regards,
Marek Szyprowski
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
This patch introduces nice defines for the initial values for UART devices
on SMDKC100.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/mach-smdkc100.c | 40
1 files changed, 25 insertions(+), 15 deletions(-)
diff --git
helper to
common dir
Best regards,
Marek Szyprowski
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5p6440/Makefile |1 +
arch/arm/{plat-s5p = mach-s5p6440}/setup-i2c0.c |2 +-
arch/arm/mach-s5p6442/Makefile |1 +
arch
Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |7 ++-
arch/arm/mach-s5pc100/Makefile
Move i2c helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |8 ++--
arch/arm/mach-s5pc100/Makefile |2
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as
S3C6400/S3C6410/S5P6440.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/serial/Kconfig | 16
drivers/serial/Makefile |1
This patch renames gpio related registers from s5pc1xx to s5pc100 to
better match the plat-s5p framework style. GPIO_MP* defines now used
anywhere thus has been removed.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm
Hello,
On Wednesday, May 19, 2010 6:02 AM Ben Dooks wrote:
On Tue, May 18, 2010 at 12:38:48PM +0200, Marek Szyprowski wrote:
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |1 +
arch/arm/mach-s5pc100/gpiolib.c
, 296 insertions(+), 26 deletions(-)
...
Works fine here on S5PC100. I will post relevant patches for s5pc100 in
a minute.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/mach-s5pc100/Kconfig |1 +
arch/arm/mach-s5pc100/gpiolib.c|3 +-
arch/arm/mach-s5pc100/include/mach/gpio.h |7 +
arch/arm/mach-s5pc100/include/mach/irqs.h |6
3/4] ARM: S5PC100: use common plat-s5p external interrupt code
[PATCH 4/4] ARM: remove obsolete plat-s5pc1xx directory
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord
This patch moves S5PC100 SoC support to plat-s5p framework. Most
periperal support code has been already moved from plat-s5pc1xx to
mach-s5pc100.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/Kconfig
Add missing call for software reset (system reboot).
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/include/mach/regs-clock.h |2 ++
arch/arm/mach-s5pv210/include/mach/system.h |7 ++-
2
definitions to the
mach-s5pv210/include/mach directory.
Signed-off-by: Pawel Osciak p.osc...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pc100/include/mach/regs-fb.h| 130
] ARM: S5PV210: add common I2C device helpers
[PATCH 7/7] ARM: S5PV210: add common HSMMC device helpers
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More
This patch adds sdhci platform helpers required by sdhci-s3c driver.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig | 11 +++
arch/arm/mach-s5pv210/Makefile |2
Add basic support for Samsung Aquila board. This board is based
on S5PC110 SoC.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig | 12 ++--
arch/arm/mach-s5pv210/Makefile |1 +
arch
This patch adds required platform definitions to enable s3c-fb
driver. Two framebuffer windows in 480x800x16bpp mode are defined.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig |2 +
arch
This patch adds common framebuffer device helpers and register defines
for S5PV210 based machines.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig |5 ++
arch/arm/mach-s5pv210
This patch adds setup code for Samsung OneNAND controller driver. The
driver needs to be aware on which SoC it is running, so the actual
device id is being changed in cpu init code. S3C64xx SoCs have 2 OneNAND
controllers while S5PC100 and S5PC110 has only one.
Signed-off-by: Marek Szyprowski
Hello,
On Thursday, May 20, 2010 10:49 AM Ben Dooks wrote:
On Thu, May 20, 2010 at 08:59:05AM +0200, Marek Szyprowski wrote:
This patch adds setup code for Samsung OneNAND controller driver. The
driver needs to be aware on which SoC it is running, so the actual
device id is being changed
-s5pc100/include/mach/regs-gpio.h
file. It should revert the changes from commit 45c79433c02b8fe7b8a1cbf6054
to that file. Without it the external interrupt 16..31 does not work on
S5PC100.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line
in for some custom kernels. It would be better
to hide the driver name change behind a function/macro like it is done for
the one-nand driver.
Best regards
--
Marek Szyprowski
Samsung Poland RD Center
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body
by external
gpio interrupt)
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig |4 ++
arch/arm/mach-s5pv210/mach-aquila.c | 66 +++
2 files changed, 70
This patch fixes the following compilation problem if only NCP machine
is selected:
arch/arm/mach-s3c64xx/s3c6410.c: In function ‘s3c6410_map_io’:
arch/arm/mach-s3c64xx/s3c6410.c:51: error: implicit declaration of function
‘s3c6410_default_sdhci2’
Signed-off-by: Marek Szyprowski m.szyprow
Most Samsung SoC have support for SDHCI block, so make the driver
dependent on the Samsung platform instead on listing all SoCs in the
Kconfig (and updating it again when support for the new SoC variant is
added).
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin
This patch increases the timeout value on sdhci-s3c controller by using
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL quirk. Without it most transfers from
external mmc cards fails on Samsung s5pv210 SoCs based systems. Tested
on Samsung Aquila board.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/mmc/host/sdhci-of-esdhc.c |1 +
drivers/mmc/host/sdhci-s3c.c | 29 +
drivers/mmc/host/sdhci.c |2 +-
drivers/mmc/host
This patch adds support for MP04 and MP05 gpio banks.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Changes since v1:
- fixed style issues reported by Kukjin Kim
arch/arm/mach-s5pv210/gpiolib.c | 14
This patch fixes the following compilation problem if only NCP machine
is selected:
arch/arm/mach-s3c64xx/s3c6410.c: In function ‘s3c6410_map_io’:
arch/arm/mach-s3c64xx/s3c6410.c:51: error: implicit declaration of function
‘s3c6410_default_sdhci2’
Signed-off-by: Marek Szyprowski m.szyprow
1 - 100 of 1092 matches
Mail list logo