Location: Le Bistro Porte de Hal, Boulevard de Waterloo 138, 1000 Brussels
Time: Sat, Feb 2nd 19:00
Regards,
-w-
On Sat, 2 Feb 2019, Jagan Teki wrote:
Can someone post the Venue?
On Fri, 25 Jan, 2019, 4:44 PM Benjamin Henrion https://elinux.org/FOSDEM
Please register here ASAP:
Hi,
Jagan Teki wrote:
A20, can boot as it is, it doesn't effect mmc node on DT, since DM_MMC
is not available.
That's interesting, the Linksprite_pcDuino3_defconfig does have DM_MMC
set, and after applying your patch (thanks for working it out), it does
fix this A20 board as well. A
Hi Jagan, Adam,
On Thu, 3 Jan 2019, Jagan Teki wrote:
On Thu, Jan 3, 2019 at 6:57 PM Zoltan HERPAI wrote:
Hi all,
The DTS resync between 2018.09 and 2018.11 seems to have broken the MMC
support for the Linksprite pcDuino (A10) and pcDuino v3 (A20) boards.
The resync happened in b9d59d0 [1
Hi all,
The DTS resync between 2018.09 and 2018.11 seems to have broken the MMC
support for the Linksprite pcDuino (A10) and pcDuino v3 (A20) boards.
The resync happened in b9d59d0 [1] and 3c92cca [2], after which u-boot
doesn't recognize the MMC controller and freezes the board (exactly the
Hi,
Hans de Goede wrote:
Hi,
On 30-08-15 10:30, Yousong Zhou wrote:
Hi
In an OpenWrt ticket [1] I reported two issues encountered by 2 SD
cards of mine.
One of them failed with `error reading clusters` when reading a uImage
file of size about 2MB. This issue happened after we switch from
Dmitriy B. wrote:
2015-05-25 10:54 GMT+03:00 Benjamin Henrion zoo...@gmail.com
mailto:zoo...@gmail.com:
Openwrt is finally released for sunxi:
https://downloads.openwrt.org/chaos_calmer/15.05-rc1/sunxi/generic/
We had to wait because otherwise there were only daily builds
On Mon, 26 Jan 2015, Simos Xenitellis wrote:
[sunxi dinner @FOSDEM]
[snip]
I have booked 22 seats, same place as last year at 8pm sharp.
People who have posted that they will take part:
- Olliver + two other people
- Hans
- Karsten
- Tsvetan + another person
- Benjamin
- Carlo
- Chen-Yu
-
Hi Hans,
On Tue, 6 Jan 2015, Hans de Goede wrote:
On 06-01-15 01:09, Zoltan HERPAI wrote:
Add support for a sun4i board built by Linksprite. This addition covers
both v1 and v2 versions. As the board has been working with 408MHz memory
setting in the u-boot-sunxi branch, and has been proven
...@debian.org
Tested-by: Zoltan HERPAI wigy...@openwrt.org
---
board/sunxi/gmac.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index e7ff952..f58c963 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -24,6 +24,15 @@ int
You can add support for the A20-LIME by adding it into
package/boot/uboot-sunxi and adding the profile entry for the board into
target/linux/sunxi/profiles. You are most welcome to send in
board support patches. :)
Regards,
-w-
On Sat, 13 Sep 2014, Paul Jones wrote:
You will need to
On Sun, 22 Jun 2014, Pillar Zuo wrote:
Hi
I am a pcDuino software angineer PM.pcDuino always use the allwinner's
chip.pcDuino user all over the world more then 100 countries.The numbers of users more
then 50w.There are a lot of user saywhy I can't find any pcDuino information in
On Mon, 12 May 2014, Hans de Goede wrote:
@@ -19,6 +19,14 @@
compatible = linksprite,a20-pcduino3, allwinner,sun7i-a20;
soc@01c0 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = default, default;
+ pinctrl-0 =
Hi Hans,
On Mon, 12 May 2014, Hans de Goede wrote:
*snip*
+Active arm armv7 sunxi - sunxi
pcDuino3
sun7i:PCDUINO3,SPL,SUNXI_EMAC,FAST_MBUS
File taken from vendor site, original comments cleaned up.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
sys_config/a20/linksprite_pcduino3.fex | 1066
1 file changed, 1066 insertions(+)
create mode 100644 sys_config/a20/linksprite_pcduino3.fex
diff --git
This patchset adds u-boot support for pcDuino3. The board
has been stress-tested for clock=480 and FAST_MBUS, and
has proven to be stable so far.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
board/sunxi/Makefile|1 +
board/sunxi/dram_pcduino3.c | 31
This patch adds sunxi SATA support to the pcDuino V3 board.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/sun7i-a20-pcduino3.dts |9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
b/arch/arm/boot/dts/sun7i-a20-pcduino3
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 30 ++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
b/arch/arm
input bindings include
- add MMC support
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
Zoltan HERPAI (4):
ARM: sun7i: dt: Add basic board support for LinkSprite pcDuino V3
ARM: sun7i: dt: Add USB host nodes to pcDuino3 DTS
ARM: sun7i: dt: Add ahci/sata support to pcDuino3 DTS
ARM: sun7i
Add node for MMC support to the pcDuino3 board.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/sun7i-a20-pcduino3.dts |8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index
This patch will add a basic board support DT for the
LinkSprite pcDuino V3, which is based on A20.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/Makefile |3 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 69 ++
2 files changed
On Fri, 9 May 2014, Hans de Goede wrote:
Hi,
When you resend this series, can you please also add support for the mmc
controller ?
Hi Hans,
Sure will do - I'm being kept busy at my workplace so that's the cause of
the delay for the re-send.
Thanks,
-w-
--
You received this message
This patch adds sunxi SATA support to the pcDuino V3 board.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/sun7i-a20-pcduino3.dts |9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
b/arch/arm/boot/dts/sun7i-a20-pcduino3
The LinkSprite pcDuino V3 is an A20-based revision of the
earlier pcDuinos. This series will add support for the board,
along with some of its devices where the driver is accepted or
soon-to-be-accepted into mainline.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
Zoltan HERPAI (3):
ARM: sun7i
This patch will add a basic board support DT for the
LinkSprite pcDuino V3, which is based on A20.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/Makefile |3 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 70 ++
2 files changed
On Fri, 2 May 2014, Luc Verhaegen wrote:
On Fri, May 02, 2014 at 01:45:03PM +0200, Zoltan HERPAI wrote:
The LinkSprite pcDuino V3 is an A20-based revision of the
earlier pcDuinos. This series will add support for the board,
along with some of its devices where the driver is accepted or
soon
Hi,
On Fri, 2 May 2014, Hans de Goede wrote:
While git am-ing this for the sunxi-devel branch I got the following:
/home/hans/projects/sunxi/linux/.git/rebase-apply/patch:15: space before tab in
indent.
status = okay;
http://wiki.openwrt.org/toh/cubietech/cubieboard
http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi#installation.process
Of course, you'll need to use the relevant u-boot image built - you can
select it in the menuconfig under Boot loaders.
Regards,
-w-
On Fri, 14 Feb 2014,
On Tue, 14 Jan 2014, Ian Campbell wrote:
On Tue, 2014-01-14 at 11:49 +0100, Luc Verhaegen wrote:
On Tue, Jan 14, 2014 at 10:19:36AM +, Ian Campbell wrote:
It sound cool! I'm arriving at Brussels Midi at 1405 on Friday
afternoon. I'm not sure if I'll have other Xen/work related commitments
- I'll make a v2 soon, thanks!
Regards,
Zoltan Herpai
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options
From b2cd1681fe988584028d280ca79249f4ebcb271c Mon Sep 17 00:00:00 2001
From: Zoltan HERPAI wigy...@uid0.hu
Date: Mon, 13 Jan 2014 14:00:12 +0100
Subject: [PATCH v2] ARM: sun4i: dt: Add basic board support for LinkSprite
pcDuino
This patch will add a basic board support DT for the
LinkSprite
This patch will add a basic board support DT for the
LinkSprite pcDuino.
Signed-off-by: Zoltan HERPAI wigy...@uid0.hu
---
arch/arm/boot/dts/Makefile |1 +
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 48 +++
2 files changed, 49 insertions(+), 0
31 matches
Mail list logo