Good evening everyone
We are working to rotate BAT / NAND in a Cubieboard2 with Samsung NAND 316
K9GBG08U0A SCB0
Below show the whole process I am following:
All changed files are attached!
#
root@notvaio:~/cubie/util-test/u-boot-wip-jwr# make ARCH=arm
CROSS_COMPILE=arm-linux-gnueabihf- Merrii_A80_Optimus_defconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED
Hello everyone I just get a Merri A80 Optimus Board that already comes with
Android installed would like to install linux on it but do not know how
this development of this processor for work with Cubieboard2 this can lead
Letter
Now I would like to know of you as this the status of this A80
Hello
How could run u-boot with lcd with
Cubieboard2 + DVK-521 using Kernke 3.19rc3
u-boot-wip with HDMI is already running
not get to do the LCD picture
Configuration it would be LCD e toud
fex
[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 4
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
[remote origin]
url = https://github.com/jwrdegoede/u-boot-sunxi.git
fetch = +refs/heads/*:refs/remotes/origin/*
[branch sunxi-wip]
remote = origin
merge = refs/heads/sunxi-wip
make ARCH=arm
*Hello Bruno Thank you for your attention sought some more docs just
applying a patch and here is the result.*
*add*
*https://dev.openwrt.org/browser/trunk/target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch?rev=42463*
Hi Bruno
Cubieboard2 + Kernel 3.18-rc3
[ 15.955655] axp20x-regulator axp20x-regulator: regulators node not found
[ 15.962580] LDO1: 1300 mV
[ 15.965732] LDO2: at 3000 mV
[ 15.969120] LDO3: at 2275 mV
[ 15.972314] LDO4: at 2800 mV
[ 15.975700] LDO5: at 2800 mV
[ 15.979075] DCDC2:
Good Morning!
I use the following repository
git clone https://github.com/jwrdegoede/u-boot-sunxi.git -b sunxi-wip
u-boot-sunxi-wip
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
And for the record SD
dd
Good Morning!
To drive the HDMI function depends on various factors
you can take a look
here http://linux-sunxi.org/Linux_mainlining_effort#Core_Stuff
Att:
Ezaul Zillmer
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from
OK vi agora V7 vou testar
Em terça-feira, 21 de outubro de 2014 11h13min16s UTC-2, Ezaul Zillmer
escreveu:
Hello everyone
Boris Brezillon
downloaded sunxi-nand-v6 now compiled for Cubieboard2
https://github.com/bbrezillon/linux-sunxi.git sunxi b-nand-v6
u-boot
git clone https
https://bitbucket.org/emiliolopez/linux/branch/sunxi-codec-v0
arch/arm/boot/dts/sun7i-a20-cubietruck.dts
115 + codec@01c22c00 {
+ routing =
+ Headphone Jack, HP Left,
+ Headphone Jack, HP Right;
+ status = okay;
+ };
+
arch/arm/boot/dts/sun7i-a20.dtsi
877 + codec: codec@01c22c00 {
+
Good afternoon everyone
I've been doing some test patches Emilio López
dma: sun4i: Add support for the DMA engine on sun [457] i SoCs
spi: sun4i: add DMA support
ARM: sun7i: Add node to Represent the DMA controller
ARM: sun7i: enable DMA on SPI
But Patches Boris BREZILLON
Add the sunxi
Hi!
Sorry forgot to mention soc:
Cubieboard2
I'm using your repository with NAND-V5
So added the PATCH Emilio López DMA
Follows in Annex
sun7i-a20.dtsi
sun7i-a20-cubieboard2.dts
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To
Good Afternoon Doctor Hans
Updated my u-boot
I wonder how was the logic I tried to compile it like this:
./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
No dick: (could correct me where I am going
blocks: (320
GB/298 GiB)
[3.787130] sd 0:0:0:0: [sda] Write Protect is off
[3.796692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
does not support DPO or FUA
[3.827250] sda: sda1
[3.836155] sd 0:0:0:0: [sda] Attached SCSI disk
done.
Ezaul Zillmer
--
You received
Hi Ian ..
You would have a repository with these updates where I could play with git,
compile and test my cubieboard2 using kernel 3.14.rc5
I'm waiting! to test your boot!
thank you
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To
#
_
Em terça-feira, 25 de fevereiro de 2014 11h04min55s UTC-3, maz escreveu:
Hi,
On 2014-02-25 13:38, Ezaul Zillmer wrote:
Hi Marc Zyngier
Where could obtain this repository with these alterations to be able
to
test
Hi Marc Zyngier
Where could obtain this repository with these alterations to be able to
test
virtualization with KVM on my cubieboard2'm using Kernel 3.14.rc4
I appreciate if you help
Thank you
--
You received this message because you are subscribed to the Google Groups
linux-sunxi
## Flattened Device Tree blob at 4900
Booting using the fdt blob at 0x4900
Loading Kernel Image ... OK
Using Device Tree in place at 4900, end 49007097
Em terça-feira, 21 de janeiro de 2014 05h58min04s UTC-2, Hans de Goede
escreveu:
Hi,
On 01/20/2014 08:53 PM, Ezaul
hi Hans
First wanted to thank his work with sunxi ... as they say here in Brazil
you're the guy !
I noticed the following after your upgrade .. 01/20/2014 my ATA does not
look rose more !
# # # # Here before UP ! # # # # #
Image Name : Linux - 3.13.0 - rc7
[ 1.150317 ] 8021Q : 802.1Q VLAN
20 matches
Mail list logo