Where was this reported?
Luc Verhaegen.
do not remember, probably on IRC
Tsvetan
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I was not going to sugar-coat anything here. And I understand that
using the 16-bit memory bus width was a side effect of extreme cost
reduction. The primary LIME competitors are likely not high end
ARM devices, but Raspberry Pi and low cost microcontrollers.
The whole point of my
this usually happens when your power supply is not enough
what you have connected to USB?
do you have big LCD attached to LCD connector without external power supply
connected to it?
Tsvetan
14 април 2014, понеделник, 15:37:11 UTC+3, Dennis Kerrisk написа:
My Olimex A20 board is now locking
Hi,
we just assembled our first A31-SOM prototypes and they work fine with
Android.
http://olimex.wordpress.com/2014/08/19/our-first-a31-som-quad-core-arm-cortex-a7-system-on-module-prototypes-work-fine/
We have 3 spare A31-SOM-EVB to give away to interested Linux-Sunxi
developers who want to
all A31 ports are available, so you can connect anything
we use the already stocked 2Mpix GT2005 camera on the EVB, but other
cameras may be connected too
Tsvetan
19 август 2014, вторник, 19:12:16 UTC+3, Jon Smirl написа:
On Tue, Aug 19, 2014 at 12:06 PM, TsvetanUsunov tsveta...@gmail.com
Great news!
How are you wiring up the power for the I/O pins?
It'd be great if we had a seperate regulator for VCC-PF,
so we could run the SD card at 1.8V and do faster UHS-1 speeds.
Cheers
ChenYu
hi
VCC-PF is connected to 3.3V
Tsvetan
--
You received this message because
Do I understand it right that these spare boards are specifically
allocated for the developers willing to work on merging the sun6i
code into the sunxi-3.4 kernel?
I just write that we have few spare boards, if one want to develop but have
no hardware we can provide
Not everyone
Hi
For A13-OLinuxino till now we conservatively used the Linux-Sunxi uboot,
but we recently got new lot of Samsung memories and we decided to tweak
some parameters for this DDR in Linux-Sunxi uboot and found problems.
As this uboot is with status not maintained anymore I will not discuss the
+2 for Olimex
сряда, 7 януари 2015 г., 17:30:50 UTC+2, Olliver Schinagl написа:
Hey guys,
with FOSDEM 2015 approaching rapidly again, I was wondering if there is
anything organized again this year? If not, Who's up for it? :) I will
be attending FOSDEM and will have a stand for
Allwinner quoted me R8 at $4.80 alone and R8M module for $16 https://
olimex.wordpress.com/2015/06/05/how
-to-get-in-the-news-tell-people-that-you-will-make-and-sell-something-which-cost-you-20-for-9/
… https://t.co/1fvaIL1k2J
at this price it's better to use A33/H3
понеделник, 11 май 2015 г.,
четвъртък, 16 юни 2016 г., 6:38:03 UTC+3, Stefan Monnier написа:
>
> I like to use A20 boards for little NAS-style servers, because of their
> very low power consumption.
>
> But so far I'm not impressed w.r.t reliability (large part of the
> problem being to get a reliable enough power
четвъртък, 16 юни 2016 г., 22:55:12 UTC+3, Olliver Schinagl написа:
>
> Hi maxime!
>
> So there is absolutely no way to differentiate between the 2?
>
> Also if they are fully identical, what is the reason of the new name?
> Packaging only?
>
> olliver
>
> Oliver, I'm just observer but may make
Hi
Did someone try to use RGB LCD with A64?
For the laptop we work on the LCD is eDP and we found RGB to eDP convertor
IC, but seems there are no drivers for A64 with parallel RGB interface.
We have few A64-OLinuXino boards and we can wire RGB LCD to them and send
to who is willing to help with
сряда, 8 февруари 2017 г., 23:13:59 UTC+2, Benjamin Henrion написа:
>
> Hi,
>
> Thank you all for coming to the diner, and for some of you joining the
> party at HSBXL afterwards, was fun.
>
> I want to thank Pine64 for sponsoring the final bill as well :-)
>
> ...
>
> And see you next year
Hi,
We make our final touch of A64-OLinuXino PCB and there we add option eMMC
Flash to work on dual voltages 1.8V and 3.3V.
The eMMC is connected to AXP803 pin.34 GPIO1/LDO. The problem is that when
A64 boots and AXP803 is not initialized it outputs default 0.8V then after
initialization
понеделник, 19 септември 2016 г., 20:06:13 UTC+3, Hans de Goede написа:
>
> Hi,
>
> On 19-09-16 18:07, TsvetanUsunov wrote:
> > Hi,
> >
> > We make our final touch of A64-OLinuXino PCB and there we add option
> eMMC Flash to work on dual voltages 1.8V and
вторник, 10 януари 2017 г., 18:01:38 UTC+2, Benjamin Henrion написа:
>
> Hi,
>
> Like previous years, I have booked the Amadeo restaurant for the Sunxi
> FOSDEM dinner:
>
> http://amadeus-resto.be/en/amadeo-brussel/
>
> Please reply to this mail so that I can book a place for you.
>
> please
17 matches
Mail list logo