I have this usb card:
Edimax USB 2.0 PCI Card
Chip: VIA VT6202 Ver. 8.
Ports: 4
It works correctly with uhci, but does not work with ehci.
Modprobe gives 2 errors with ehci [0].
Interresting is, that uhci finds 2 hubs with 2 ports, but ehci finds 1 hub
with 4 ports [1] [2].
Do you think there
Am Freitag, 11. Juni 2004 16:47 schrieb David Brownell:
> Markus Raab wrote:
> >>That's wierd. You're not the only one reporting such problems
> >>with a VT6202 lately -- overcurrent, then failures.
> >
> > Yes, i read it but his problem is not solved. I
Am Samstag, 19. Juni 2004 23:11 schrieben Sie:
> On Sat, Jun 19, 2004, Markus Raab <[EMAIL PROTECTED]> wrote:
> > I would be glad to hear from you, independantly if you want more info or
> > have an idea how to patch the problem.
>
> You seem pretty sure this is a
My 4 port usb card with the chip VT6202 works only with 2 Ports. My Kernel is
2.6.7.
Kernel messages:
Jun 18 16:41:01 superbyte kernel: PCI: Found IRQ 9 for device :00:0c.2
Jun 18 16:41:01 superbyte kernel: PCI: Sharing IRQ 9 with :00:0a.0
Jun 18 16:41:01 superbyte kernel: ehci_hcd :0
Am Freitag, 11. Juni 2004 16:47 schrieb David Brownell:
> Markus Raab wrote:
> >>That's wierd. You're not the only one reporting such problems
> >>with a VT6202 lately -- overcurrent, then failures.
> >
> > Yes, i read it but his problem is not solved. I
Am Donnerstag, 10. Juni 2004 01:58 schrieb David Brownell:
> Markus Raab wrote:
> > I have a 4 port usb card with the chip: VIA VT6202 Ver. 8.0.
> >
> > With 2.6.6 just one Port works with it.
> > When i connect a usb device to the working port
> > followin
I have a 4 port usb card with the chip: VIA VT6202 Ver. 8.0.
With 2.6.6 just one Port works with it.
When i connect a usb device to the working port
following error appears:
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
hub 4-0:1.0: over-current change on port 3
hub 4-0:1.0: over-curre
