> "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
Jon> I opened the device up, the chip is marked zt6688. The Davicom driver
Jon> has it listed as an alias. Maybe there is some variation between the
Jon> dm9601 and zt6688.
Possible. I unfortunately only have access to a dm9601.
--
Bye, P
> "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
Hi,
Jon> My e1000 adapter puts these messages in my log:
Jon> ADDRCONF(NETDEV_UP): eth0: link is not ready
Jon> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jon> Davicom is only putting this in:
Jon> ADDRCONF(NETDEV_UP): eth1: link i
> "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
Hi,
>> Odd, it doesn't seem to detect the link. Does it help to down and
>> re-up the interface?
Jon> Yes, and ifconfig eth1 down, ifconfig eth1 up, will fix the condition.
Jon> This is 100% repeatable, I tried it about five times. On init
I opened the device up, the chip is marked zt6688. The Davicom driver
has it listed as an alias. Maybe there is some variation between the
dm9601 and zt6688.
--
Jon Smirl
[EMAIL PROTECTED]
-
This SF.net email is sponsored b
On 6/27/07, Jon Smirl <[EMAIL PROTECTED]> wrote:
> On 6/27/07, Peter Korsgaard <[EMAIL PROTECTED]> wrote:
> > > "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
> >
> > Jon> It looks like the driver is broken. I put the device into a Windows
> > Jon> laptop and it works fine.
> >
> > Jon> Note
On 6/27/07, Peter Korsgaard <[EMAIL PROTECTED]> wrote:
> > "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
>
> Jon> It looks like the driver is broken. I put the device into a Windows
> Jon> laptop and it works fine.
>
> Jon> Note that ifconfig doesn't say the interface is RUNNING.
> Jon> It
> "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
Jon> It looks like the driver is broken. I put the device into a Windows
Jon> laptop and it works fine.
Jon> Note that ifconfig doesn't say the interface is RUNNING.
Jon> It is UP and I gave it a static IP but it still isn't RUNNING.
Jon>
Here's a debug trace from plugging it in.
[ 116.765349] hub 5-1:1.0: state 7 ports 7 chg evt 0020
[ 116.765589] hub 5-1:1.0: port 5, status 0101, change 0001, 12 Mb/s
[ 116.893222] hub 5-1:1.0: debounce: port 5: total 100ms stable 100ms
status 0x101
[ 116.965088] usb 5-1.5: new full speed
It looks like the driver is broken. I put the device into a Windows
laptop and it works fine.
Note that ifconfig doesn't say the interface is RUNNING.
It is UP and I gave it a static IP but it still isn't RUNNING.
eth1 Link encap:Ethernet HWaddr 00:60:6E:BF:25:89
inet addr:192.168.
> "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
Hi,
Jon> This is an older device from 2002. It is USB 1.0, not USB 2.0 as
Jon> Shentech implies.
Yes, the DM9601 chip is USB1.1
Jon> There's a driver for this device in the kernel but I can't get it to
J
In my quest for USB to Ethernet adapters I ordered on of these:
http://store.shentech.com/hiusb2010usb.html
It is based on the Davicom DM9601
Datasheet/programming info
http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf
This is an older device from 2002. It is USB 1.0,
11 matches
Mail list logo
