Stephen J. Gowdy wrote:
Have you tried just mounting the /dev/sdX1 partition (check the log files
to see where it ends up, sda1, sdb1 or sdc1 or whatever)? If that doesn't
work do you have SCSI Disk support?
Yes, I've tried mounting it. The mount process hangs in uninterruptible
sleep. Yes, I do
Hi,
When I plug in the Sandisk Cruzer mini Part # 20-90-00103-256 Mdl # SDC22-256
it hangs HARD both my SUSE 8.2 systems. They are both SMP P-IIIs (1.0GHz and
1.266GHz) but one on Tyan Tiger and one on MSI. This unit works on a W98 AMD
pc. Sandisk lists the dev as USB 2.0. I have not gotten it
Have you tried just mounting the /dev/sdX1 partition (check the log files
to see where it ends up, sda1, sdb1 or sdc1 or whatever)? If that doesn't
work do you have SCSI Disk support?
On Fri, 12 Dec 2003, Thomas Wainwright wrote:
> I have been trying to get a SanDisk Cruzer Mini flash drive worki
I have been trying to get a SanDisk Cruzer Mini flash drive working
under SuSE 8.2. I am having the following problem:
When I insert the device, it is detected by the USB system, and shows up
in /proc/bus/usb/devices with correct info and serial number. However,
in /proc/scsi/scsi, it is list
Hi,
several oops got using kernel 2.4.23 presumably turning off the usb
printer to stop an unwanted job...
OOPS#1 #
Dec 12 17:58:28 cripat kernel: Unable to handle kernel paging request at
virtual address 5a01954c
Dec 12 17:58:28 cripat kernel: c014dd53
Dec 12 17:58:28
I wrote:
> I'm trying to get several ide cdrom drives to work with a usb->ide adapter
> but I'm ahving no success as of yet. The adapter is found and identified
.
.
.
I might add that is on linux 2.4.23, x86
cat /proc/bus/usb/devices :
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 M
hi,
I'm trying to get several ide cdrom drives to work with a usb->ide adapter
but I'm ahving no success as of yet. The adapter is found and identified
correctly as a Goodway USBIDE, but the cdrom never shows up (/dev/scd* gives
me no such device) ide-scsi, usb-massstorage and scsi support (for cd
hello friends,
Does anybody has clue about how to port the ehci-hcd(Enhanced Host
Controller USB2.0) driver to a non-PCI based system.The system here
involves ARM926 processor with AHB bus interconnectivity with the host
controllersystem does not support PCI.All possible suggestions are
wel
