On Fri, Mar 15, 2002 at 02:40:10PM +0100, Stephen J. Gowdy wrote:
> Did you do this while a uhci driver was already loaded? As it hasn't
> succeded and you can see the contents of /proc/bus/usb/devices I suspect
> so. On my system I have;
>
> [pb-d-137-138-42-247] ~ > grep usb /etc/modules.conf
Hi Jeremy,
Comments embedded below.
On Fri, 15 Mar 2002, Jeremy Bowen wrote:
> Yes. I believe I've installed hotplug support correctly. I think the
> evidence in the logs from when I switched the CF reader between USB ports
> indicated this (but please correct me if I'm wrong or have mis
On Thu, 14 Mar 2002 14:51:36 +0100 (CET) "Stephen J. Gowdy" <[EMAIL PROTECTED]>
wrote:
> Hotplug calls a script to load modules automatically. Do you have hotplug
> installed;
Yes. I believe I've installed hotplug support correctly. I think the
evidence in the logs from when I switched the CF r
Hi Jeremy,
Your CF reader is not yet supported, though work is being done. See
http://www.lysator.liu.se/~unicorn/hacks/usbat2/
I am in the same situation. I tried their latest driver last weekend but
couldn't get it to work on my sys (2.4.17 kernel, debian woody), though
they report some s
(I don't know why I'm bothing to help after your "please don't
help" request, anyway...)
Hotplug calls a script to load modules automatically. Do you have hotplug
installed;
[localhost] ~ > rpm -q hotplug
hotplug-2001_04_24-11
If you'd read the FAQ you'd have discoved that the output of
/proc
Stephen J Gowdy <[EMAIL PROTECTED]> wrote:
> There is no evidence of hotplug in your (greped) logs.
> Read the FAQ about information needed to help.
Thanks for replying but I really don't know why you bothered with a
whole *2-line* answer.
If you haven't got the time to write anything useful,
There is no evidence of hotplug in your (greped) logs. Read the FAQ about
information needed to help.
On Thu, 14 Mar 2002, Jeremy Bowen wrote:
> I cannot get my compact flash reader recognised.
>
> Nothing shows up from a cat /proc/scsi/scsi
>
> I've tried connecting the reader to different p
I cannot get my compact flash reader recognised.
Nothing shows up from a cat /proc/scsi/scsi
I've tried connecting the reader to different ports and get the following
output from 'dmesg | grep usb'
usb.c: registered new driver usbdev
