On Mon, Apr 26, 2004 at 03:13:51PM -0700, YhLu wrote:
> I talked to lsi again, and they will do sth.
Great news, even if we haven't seen the results. Thanks a lot! :)
//Peter
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mail
I talked to lsi again, and they will do sth.
-éäåä-
åää: Hendricks David W. [mailto:[EMAIL PROTECTED]
åéæé: 2004å4æ26æ 15:02
æää: YhLu
æé: [EMAIL PROTECTED]
äé: Re: ÂÃÂÂ: tyan s2880 build broken?
What about 3Ware? They had someone on this list a while ago, so maybe
they'd be willi
x27;t need download FW into it.
>
> Regards
>
> YH
>
>
>
> -ÓʼþÔ¼þ-
> ·¢¼þÈË: ron minnich [mailto:[EMAIL PROTECTED]
> ·¢ËÍʱ¼ä: 2004Äê4ÔÂ26ÈÕ 14:20
> ÊÕ¼þÈË: YhLu
> ³ËÍ: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Ö÷Ìâ: Re: tyan s2880 build broken?
&
ECTED]; [EMAIL PROTECTED]
主题: Re: tyan s2880 build broken?
On Mon, 26 Apr 2004, YhLu wrote:
> So I need disable the code always, and don't send the image to the end
user.
>
> What's pity!
you might want to talk to LSI about this, but Eric is right. LSI needs to
get
On Mon, 26 Apr 2004, YhLu wrote:
> So I need disable the code always, and don't send the image to the end user.
>
> What's pity!
you might want to talk to LSI about this, but Eric is right. LSI needs to
get their act together.
ron
___
Linuxbios mail
So I need disable the code always, and don't send the image to the end user.
What's pity!
YH.
-邮件原件-
发件人: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
发送时间: 2004年4月26日 11:12
收件人: YhLu
抄送: [EMAIL PROTECTED]
主题: Re: tyan s2880 build broken?
YhLu <[EMAIL PROTECTED]> w
YhLu <[EMAIL PROTECTED]> writes:
> I will change the code to disable the lsi_scsi as the default.
>
> Do you have lsi 1030 onboard? You need to use it?
>
> If you need to use it, I send you pre-built image, because I can not publish
> the source code of lsi_scsi. LSI don’t want to.
If you c
On Mon, 26 Apr 2004, YhLu wrote:
> When I using the new config to deal with it, the tool seems doesn¡¯t support
> expression. I will check that in current config tool.
it supports the expression, it just gets it wrong. Sorry. Another bug!
ron
___
Linu
When I using the new config to deal with it, the tool seems doesn’t support
expression. I will check that in current config tool.
YH
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2004年4月26日 10:57
收件人: YhLu
抄送: HC Wang; [EMAIL PROTECTED]
主题: Re: 答复: 答复: tyan s2880 build broken
:49
收件人: YhLu
抄送: HC Wang; [EMAIL PROTECTED]
主题: Re: 答复: tyan s2880 build broken?
On Mon, 26 Apr 2004, YhLu wrote:
> Don't forget 2. otherwise the final image will short some.
What should it be?
ron
___
Linuxbios mailing list
[EMAIL PROTECT
On Mon, 26 Apr 2004, YhLu wrote:
> Don't forget 2. otherwise the final image will short some.
What should it be?
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
On Mon, 26 Apr 2004, YhLu wrote:
> When enabling lsi_scsi support, It need leave 48k in the BIOS ROM for
> lsi_scsi fw. So need to change normal mode ROM_SIZE to 512k-48k.
OK, BTW you can do this:
option ROM_SIZE = 512*1024 - 48*1024
which is not as readable as 512k-48k, but is pretty re
1. In freebios2/src/mainboard/tyan/s2880/Config.lb comment out dir
../common/lsi_scsi
2. In freebios2/targets/tyan/s2880/Config.lb comment out option
ROM_SIZE = 475136
Don't forget 2. otherwise the final image will short some.
Regards
YH
-邮件原件-
发件人: ron minnich [m
I just commented out the #dir ../
entry in mainboard/tyan/s2880/Config.lb and the buildtarget seems ok. I
will commit.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
don¡¯t want to.
I committed the change and s2880 builds again.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
On Mon, 26 Apr 2004, YhLu wrote:
> If you need to use it, I send you pre-built image, because I can not publish
> the source code of lsi_scsi. LSI don¡¯t want to.
grr.
Is there a ROM BIOS for it?
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http
Wang
[mailto:[EMAIL PROTECTED]
发送时间: 2004年4月26日
10:15
收件人:
[EMAIL PROTECTED]
主题: tyan s2880 build broken?
Hi,
I checked out linuxbios2 tree from sourceforge.net,
and I have problem with building bios for tyan s2880 motherboard, here is the
error message from buildtarget tyan/s2880
I think with Stefan's last set of patches we're missing some cvs adds?
Stefan?
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
Hi,
I checked out linuxbios2 tree from sourceforge.net, and I
have problem with building bios for tyan s2880 motherboard, here is the error
message from buildtarget tyan/s2880:
Configuring PART mainboard, path tyan/s2880
===> NOTE: Changing default value of LB_CKS_RANGE_ST
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [031118 17:35]:
> Hi,
>
> I'm a newbie to this, but I'm trying to build for a Tyan S2880 board.
> However during the build I get;
>
>
> eebios2/src/devices/hypertransport.c
> /tmp/ccniyAWJ.s: Assembler messages:
Hi,
I'm a newbie to this, but I'm trying to build for a Tyan S2880 board.
However during the build I get;
eebios2/src/devices/hypertransport.c
/tmp/ccniyAWJ.s: Assembler messages:
/tmp/ccniyAWJ.s:120: Error: Incorrect register `%rcx' used with `l' suffix
/tmp/c
On Fri, Oct 31, 2003 at 10:03:09PM +0100, Stefan Reinauer wrote:
> Hm.. just had the idea.. maybe it makes sense to use no-pci mode if no
> pci controller can be found?
That sounds like a symptomatic treatment.
Maybe I can do this but with a big fat warning would be displayed.
We have to fix the
* SONE Takeshi <[EMAIL PROTECTED]> [031030 18:36]:
> On Thu, Oct 30, 2003 at 01:32:49PM +0100, Stefan Reinauer wrote:
> > > I checked Etherboot and it just scans bus 0 to 255 unconditionally.
> > > I don't know which is better.
> > > Anyway attached patch changes the PCI scan to Etherboot way.
> >
t; without VGA init.
>
> X works at least on EPIA using VGABIOS support of LinuxBIOS(v1).
On the Tyan S2880 with onboard Rage XL it works using the kernel
framebuffer driver with SGIs nobios patch (partly integrated in 2.6)
I'll try to write it down when I got the other things done.
On Fri, Oct 31, 2003 at 10:07:28AM -0800, YhLu wrote:
> So need one customerization Installation image to execute the sh to install
> conf file. Also the kernel in the installation image should support X server
> without VGA init.
X works at least on EPIA using VGABIOS support of LinuxBIOS(v1).
-
PROTECTED]
主题: Re: filo on Tyan s2880
On Thu, Oct 30, 2003 at 10:25:07AM -0800, YhLu wrote:
> So if the user installed the Linux Distribution to HD in normal BIOS and
> after that he flash the ROM to LinuxBIOS with FIFO and the system call
work
> without any problem.
If the user writes
On Thu, Oct 30, 2003 at 02:43:47PM -0600, Richard Smith wrote:
> >My plan is to add support for configuration file, so the default kernel
> >location and parameters will no longer be hard coded in the Flash, and
> >Stephan told me maybe he can support this config file in the future
> >releases of S
On Thu, Oct 30, 2003 at 10:25:07AM -0800, YhLu wrote:
> So if the user installed the Linux Distribution to HD in normal BIOS and
> after that he flash the ROM to LinuxBIOS with FIFO and the system call work
> without any problem.
If the user writes the FILO configuration file.
It will be possible
SONE Takeshi wrote:
See this for details: http://te.to/~ts1/filo/
My plan is to add support for configuration file, so the default kernel
location and parameters will no longer be hard coded in the Flash, and
Stephan told me maybe he can support this config file in the future
releases of SuSE ins
; [EMAIL PROTECTED]
主题: Re: filo on Tyan s2880
On Thu, Oct 30, 2003 at 09:49:49AM -0800, YhLu wrote:
> What is the FIFO URL and the status?
> Is it some kind payload for LinuxBIOS?
FILO loads vmlinuz and ELF kernel from filesystem (like ext2)
on the local IDE hard disk, CD-ROM, CompactFlash,
On Thu, Oct 30, 2003 at 09:49:49AM -0800, YhLu wrote:
> What is the FIFO URL and the status?
> Is it some kind payload for LinuxBIOS?
FILO loads vmlinuz and ELF kernel from filesystem (like ext2)
on the local IDE hard disk, CD-ROM, CompactFlash, or ROM.
It's working well on my EPIA, and also repor
SONE,
What is the FIFO URL and the status?
Is it some kind payload for LinuxBIOS?
Regards
YH.
-邮件原件-
发件人: Stefan Reinauer [mailto:[EMAIL PROTECTED]
发送时间: 2003年10月30日 4:33
收件人: SONE Takeshi
抄送: [EMAIL PROTECTED]
主题: Re: filo on Tyan s2880
* SONE Takeshi <[EMAIL PROTECTED]> [031
On Thu, Oct 30, 2003 at 01:32:49PM +0100, Stefan Reinauer wrote:
> > I checked Etherboot and it just scans bus 0 to 255 unconditionally.
> > I don't know which is better.
> > Anyway attached patch changes the PCI scan to Etherboot way.
>
> Thanks. with this patch it also works using PCI.
I'll mak
* SONE Takeshi <[EMAIL PROTECTED]> [031030 13:25]:
> On Thu, Oct 30, 2003 at 12:40:02PM +0100, Stefan Reinauer wrote:
> > * SONE Takeshi <[EMAIL PROTECTED]> [031030 11:40]:
> > > On Thu, Oct 30, 2003 at 11:34:29AM +0100, Stefan Reinauer wrote:
> > > > I am using an etherboot payload that reads an e
* SONE Takeshi <[EMAIL PROTECTED]> [031030 11:40]:
> On Thu, Oct 30, 2003 at 11:34:29AM +0100, Stefan Reinauer wrote:
> > I am using an etherboot payload that reads an elf image from
> > the first sectors on the disk. This works fine, I put filo there
> > so I can load a kernel from any filesystem.
On Thu, Oct 30, 2003 at 11:34:29AM +0100, Stefan Reinauer wrote:
> I am using an etherboot payload that reads an elf image from
> the first sectors on the disk. This works fine, I put filo there
> so I can load a kernel from any filesystem. Unfortunately filo seems
> to find no IDE controller, it s
Hi,
I am using an etherboot payload that reads an elf image from
the first sectors on the disk. This works fine, I put filo there
so I can load a kernel from any filesystem. Unfortunately filo seems
to find no IDE controller, it says IDE channel 0 not found.
Etherboot and Linux can see the ide con
Ron,
It seems I can not enable XIP_ROM_SIZE and XIP_ROM_BASE. Even I have set
them in Options.lb
Regards
Yinghai Lu
-邮件原件-
发件人: YhLu
发送时间: 2003年8月6日 15:17
收件人: YhLu; [EMAIL PROTECTED]; ron minnich
抄送: Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: S2880
Ron,
After swap _ROMBASE etc to
It seems the Kernel clear 0x0--4k.
Of course after itself take the MP TABLE.
Maybe need to update the kernel.
YH
-邮件原件-
发件人: YhLu
发送时间: 2003年8月6日 18:30
收件人: ron minnich
抄送: '[EMAIL PROTECTED]'; 'Stefan Reinauer'; '[EMAIL PROTECTED]'
主题: re: S2880
Eric,
Eric,
It seems the image that built with can not switch to Normal booting.
1. In Fallback mode, after power on I can use cmos_util.
2. after rebooting it is still in Fallback mode,and can not cmos_util, it
said can not find option table in the ram. And can not access cmos.layout.
When I using o
On Wed, 6 Aug 2003, YhLu wrote:
> So you will add one module that will produce PIRQ automatically?
I don't see any choice. Bus mapping is dynamic and hence a static table
is not going to work. We have needed this for some time now anyway.
ron
___
Lin
x27;t execute auto.c again.
Any advise.
Regards
Yingahi Lu
-邮件原件-
发件人: YhLu
发送时间: 2003年8月6日 17:11
收件人: ron minnich
抄送: '[EMAIL PROTECTED]'; 'Stefan Reinauer'; '[EMAIL PROTECTED]'
主题: 答复: S2880
Ron,
I have verfied that if I disable the XIP... in old config
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
> Under 4G RAM linusbios_tables occupy 0x500-0xae0, cmos_util can find
> option_table even after rebooting.
> Under 6G RAM linuxbios_tables occupy 0x500-0xaf4, cmos_util can find
> option_table after power on but can not find it after rebooting.
>
> The o
;; 'Stefan Reinauer'; '[EMAIL PROTECTED]'
主题: Re: S2880
I will try to email you my latest tree, Stefan put them in last night.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
On Wed, 6 Aug 2003, YhLu wrote:
> It seems the Kernel clear 0x0--4k.
> Of course after itself take the MP TABLE.
yuck. I always thought it left that page alone, since it's page zero
anyway.
Well, that explains a thing or two.
ron
___
Linuxbios mail
I will try to email you my latest tree, Stefan put them in last night.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
I really need a working PIRQ (don't ask) so I'm going to take a stab at
generating one from the linuxbios tables, unless somebody else has
done/wants to do it.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listin
memory
# Looking for definitions in cmos.layout file
Can not open config file cmos.layout
Regards
Yinghai Lu
-邮件原件-
发件人: YhLu
发送时间: 2003年8月6日 11:18
收件人: '[EMAIL PROTECTED]'; ron minnich
抄送: Stefan Reinauer; [EMAIL PROTECTED]
主题: S2880
Eric,
It seems the image that built wi
So you will add one module that will produce PIRQ automatically?
YH
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年8月6日 20:50
收件人: YhLu
抄送: '[EMAIL PROTECTED]'; 'Stefan Reinauer'; '[EMAIL PROTECTED]'
主题: Re: S2880
I really need a working PI
ECTED]'; 'Stefan Reinauer'; '[EMAIL PROTECTED]'
主题: Re: S2880
On Wed, 6 Aug 2003, YhLu wrote:
> It seems the Kernel clear 0x0--4k.
> Of course after itself take the MP TABLE.
yuck. I always thought it left that page alone, since it's page zero
anyway.
On Wed, 6 Aug 2003, Steve Gehlbach wrote:
> I don't know if it is helpful to what you need or not, but there is code
> in the stpc section that builds a PIRQ table:
> (freebios/src/mainboard/stpc/consumer2/mainboard.c). This uses the 0x0f
> router code which is a way around linux if it does not
ron minnich wrote:
I really need a working PIRQ (don't ask) so I'm going to take a stab at
generating one from the linuxbios tables, unless somebody else has
done/wants to do it.
I don't know if it is helpful to what you need or not, but there is code
in the stpc section that builds a PIRQ tab
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> It works on 12G too.
>
> Setting variable MTRR 0, base:0MB, range: 2048MB, type WB
> Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
> Setting variable MTRR 2, base: 3072MB, range: 512MB, type WB
> Setting variable MTRR 3, base: 358
Reinauer; [EMAIL PROTECTED]
主题: re: Fixes for Tyan s2880
Eric,
It works. For 6G. Tommorrow I will try 12G.
Thanks.
Yinghai Lu
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
Stefan Reinauer <[EMAIL PROTECTED]> writes:
> * Eric W. Biederman <[EMAIL PROTECTED]> [030801 05:43]:
> > Here is my most recent snapshot, which is slightly newer
> > than what I have in the public CVS tree.
> >
> > I think I need to scrub all of memory on the B3 stepping before
> > I start using
* Eric W. Biederman <[EMAIL PROTECTED]> [030801 05:43]:
> Here is my most recent snapshot, which is slightly newer
> than what I have in the public CVS tree.
>
> I think I need to scrub all of memory on the B3 stepping before
> I start using it. I have not tested anything that is C0 specific yet.
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> Several Macro in console/console.h should be changed.
>
> For example:
> #define print_debug_hex8(HEX) printk_debug("0x08x", ((HEX))
> #define print_debug_hex16(HEX) printk_debug("0x016x", ((HEX))
> #define print_debug_hex32(HEX) printk_debug("0x032x
Eric,
It works. For 6G. Tommorrow I will try 12G.
Thanks.
Yinghai Lu
-邮件原件-
发件人: YhLu
发送时间: 2003年7月31日 20:44
收件人: [EMAIL PROTECTED]
抄送: ron minnich; Stefan Reinauer; [EMAIL PROTECTED]
主题: 答复: Fixes for Tyan s2880
Eric,
I see.
I move some code from raminit.c setup_top_ram to it and
CTED]
抄送: ron minnich; Stefan Reinauer; [EMAIL PROTECTED]
主题: 答复: Fixes for Tyan s2880
Eric,
I see.
I move some code from raminit.c setup_top_ram to it and have a try.
Regards
Yinghai Lu
-邮件原件-
发件人: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月31日 20:40
收件人: YhLu
抄送: ron m
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> Great. Then there should be no big issue on opteron any more.
>
> Can you send to the new raminit.c to me now?
Here is my most recent snapshot, which is slightly newer
than what I have in the public CVS tree.
I think I need to scrub all of memory on
Eric,
I see.
I move some code from raminit.c setup_top_ram to it and have a try.
Regards
Yinghai Lu
-邮件原件-
发件人: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月31日 20:40
收件人: YhLu
抄送: ron minnich; Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: Fixes for Tyan s2880
YhLu <[EM
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> I have checked your old k8/cpufixup.c, and it already has TOM2 etc setup.
> and SYSCFG_TOM2_EN...etc...
I shift by 12 instead of 10 for the low half of TOP_MEM2...
Which tends to leave TOP_MEM2 at 4GB...
Eric
___
Tyan s2880
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> I have made two changes in raminit.c
> 1. csbase counting
> 2. fill_last to make sure kernel to scan NUMA successfully.
>
> For s2880 it can work with 4*1G+2*256M RAM, and doesn't work with
> 4*1G+2*512
Eric,
Great. Then there should be no big issue on opteron any more.
Can you send to the new raminit.c to me now?
Regards
Yinghai Lu
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
On 31 Jul 2003, Eric W. Biederman wrote:
>
> I should be switching over to the new configuration system on Monday
> and once that is sorted out quite I can start putting hard codes
> where they belong in the board specific configuration.
>
good timing, I'm back then.
Greg has further ideas an
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> I have made two changes in raminit.c
> 1. csbase counting
> 2. fill_last to make sure kernel to scan NUMA successfully.
>
> For s2880 it can work with 4*1G+2*256M RAM, and doesn't work with
> 4*1G+2*512M or 4*1G+2
ron minnich <[EMAIL PROTECTED]> writes:
> On 29 Jul 2003, Eric W. Biederman wrote:
>
> > Hmm. We can't have a per architecture default _RAMBASE?
>
> not sure if it makes sense per architecture. Consider those Alpha boards
> where rambase depended on chip type, board type, engineer's last name,
On 29 Jul 2003, Eric W. Biederman wrote:
> Hmm. We can't have a per architecture default _RAMBASE?
not sure if it makes sense per architecture. Consider those Alpha boards
where rambase depended on chip type, board type, engineer's last name, and
phase of the moon. I'm sure we'll see more of t
Eric,
I have made two changes in raminit.c
1. csbase counting
2. fill_last to make sure kernel to scan NUMA successfully.
For s2880 it can work with 4*1G+2*256M RAM, and doesn't work with
4*1G+2*512M or 4*1G+2*1G.
I would try to substitute raminit.c with hardcode one to test for 6G, if i
Stefan Reinauer <[EMAIL PROTECTED]> writes:
> * Eric W. Biederman <[EMAIL PROTECTED]> [030730 07:55]:
> > > Index: src/southbridge/amd/amd8111/amd8111_ldtstop.c
> > > ===
> > > RCS file:
> > > /cvsroot/freebios/freebios2/src/southbrid
* Eric W. Biederman <[EMAIL PROTECTED]> [030730 07:55]:
> > Index: src/southbridge/amd/amd8111/amd8111_ldtstop.c
> > ===
> > RCS file:
> > /cvsroot/freebios/freebios2/src/southbridge/amd/amd8111/amd8111_ldtstop.c,v
> >
> > retrieving
ron minnich <[EMAIL PROTECTED]> writes:
> OK, I have applied Yh Lu's patches for the most part. In almost all cases
> they are tyan 2880-specific. There are three things I can see that might
> affect others:
>
> #ifdef some-variable
> no longer works in many places, it has to be
> #if some-var
OK, I have applied Yh Lu's patches for the most part. In almost all cases
they are tyan 2880-specific. There are three things I can see that might
affect others:
#ifdef some-variable
no longer works in many places, it has to be
#if some-variable == 1
to work.
- for the new config too, there
Yh Lu, this will take me a little time to integrate your patches, I hope
to be done tomorrow. Some of the things you have patched I have also
fixed, but due to the 24-hour delay at sourceforge.net, we are out of
sync.
Thanks for your patches, I hpoe to commit by tomorrow.
ron
___
Ron.
Changes in raminit.c add fill_last function.
So remove following error while kernel booting:
" Scanning NUMA topology in Northbridge 24
Node 0 MemBase Limit 7fff
Node 1 MemBase 8000 Limit f000
Node map not sorted 8000,0
No NUMA configu
* ron minnich <[EMAIL PROTECTED]> [030728 06:38]:
> Eric and Stefan, please pick a name and let us know what it should be. Are
> CONFIG_MAX_CPUS and CONFIG_MAX_PHYSICAL_CPUS the same or different (I'm
> guessing different due to hyperthreading)?
I agree. Naming CONFIG_MAX_CPUS CONFIG_MAX_LOGICA
On Sat, 26 Jul 2003, Yinghai Lu wrote:
> I can send you the diff next Monday if you want.
please do.
>
> I add LINUXBIOS_EXTRA_VERSION to the Option.lb in the config. Use that
> We can diff from normal boot to fallback boot in the output.
very cool.
>
> Change some #ifdef to #if CONFIG_SMP==
收件人: YhLu
主题: Re: Fixes for Tyan s2880
On Fri, 25 Jul 2003, YhLu wrote:
> 1. I have tried to add lines
> In targets/tyan/s2880/Config.lb
>
> Uses CONFIG_LSI_SCSI_FW_FIXUP
> Option CONFIG_LSI_SCSI_FW_FIXUP=1
you shouldn't need to do that at all. What code depends on it?
Maybe you are right, becase I can not see any update on s2880 dir. And can
not get config.lb and chip.c that you prepare for me.
Can you send those files to me?
Regards
Yinghai Lu
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月25日 12:05
收件人: YhLu
抄送: [EMAIL PROTECTED
On Fri, 25 Jul 2003, YhLu wrote:
> It seems that you roll back to the tree, because of Stefan's complain.
no, I did not roll anything back. Did something roll back?
Or are you seeing the 24-hour sourceforge.net delay?
ron
___
Linuxbios mailing list
[
t can put files on s2880 for me.
Also please send the Config.lb to me and I would to test the new config
tool.
Thanks.
Regards
Yinghai Lu
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月24日 21:31
收件人: [EMAIL PROTECTED]
主题: Fixes for Tyan s2880
Yh Lu needed to add a main
Yh Lu needed to add a mainboard-specific initialization code for the Tyan
s2880 board, and needed it called at a special place in hardwaremain(). In
V1, we would use defines and other such trickery to get this capability.
We're trying to avoid that in V2.
This problem turns out to be a pe
OK, I will start on this tonight.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
Good, I will use your new config tool for s2880.
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月24日 16:07
收件人: YhLu
抄送: [EMAIL PROTECTED]; Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: K8 + 2.4.21 + Tyan S2880
YhLu: I can fix your problem without adding the mainboard init
YhLu: I can fix your problem without adding the mainboard init function to
hardware main, and also without code like this to the include file:
#ifdef FINAL_MAINBOARD_FIXUP
void final_mainboard_fixup(void);
#else
# define final_mainboard_fixup() do {} while(0)
#endif /* FINAL_MAINBOARD_FIXUP
OK, I'm back, the checked out tree works fine now.
YhLu, I will try to commit your changes tomrrow.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
* ron minnich <[EMAIL PROTECTED]> [030724 21:37]:
> Thank you for the patch.
>
> What I would like to do is get my linuxbios back to working condition,
> then merge these in. Otherwise, if Stefan can test and verify them, maybe
> he can merge them in before me.
I'm sitting at home and don't h
Thank you for the patch.
What I would like to do is get my linuxbios back to working condition,
then merge these in. Otherwise, if Stefan can test and verify them, maybe
he can merge them in before me.
Thanks
ron
___
Linuxbios mailing list
[EMAIL
AIL PROTECTED]'
主题: Re: K8 + 2.4.21 + Tyan S2880
Eric or Ron or Stepfan,
To make the NIC under mem auto-conf code, I have spent one day on it. Here
are my findings:
1. Use the most updated code, in the Etherboot stage it will reboot after
firt NIC try aborting.
2. I have try to subsutite me
件人: '[EMAIL PROTECTED]'
抄送: ron minnich; Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: K8 + 2.4.21 + Tyan S2880
Eric,
It can be compiled with you new code. But it meet problems in Etherboot
stage.
In S2880 has two broadcom NIC port in 8131 bus B, and one amd 8111 built-in
nic, and even if
Eric,
It can be compiled with you new code. But it meet problems in Etherboot
stage.
In S2880 has two broadcom NIC port in 8131 bus B, and one amd 8111 built-in
nic, and even if I hide it in amd8111 init and Etherboot can find it and try
to enable it and can not find the PM cap so aborting, in
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> In the auto.c, if I enable : sdram_initialize(&cpu1), the linuxbios need
> another 20k. What happened? Only add one line and the same function has been
> called ???
All functions are inline and the set of functions called is large.
At least I believe
tefan Reinauer; [EMAIL PROTECTED]
主题: Re: K8 + 2.4.21 + Tyan S2880
Ron,
Before fallback is 64k, I make normal image into (512-64)k, and fallback
image into 64k, and then cat them into one 512k.
Actually the normal is quite loose with a lot of zeros, and the payload is
about 20k.
So I need to chang
On 21 Jul 2003, Eric W. Biederman wrote:
> You haven't had your debug code fail to compile because linuxbios goes
> over the 64K limit yet either.
I just did :-)
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/list
ron minnich <[EMAIL PROTECTED]> writes:
> On 21 Jul 2003, Eric W. Biederman wrote:
>
> > Next time I get to it I intend to start honoring the inline keyword.
> > The problem is that it inlines everything and creates code bloat.
>
> hmm, I'll be wanting to see how you solve the call stack problem
On 21 Jul 2003, Eric W. Biederman wrote:
> Next time I get to it I intend to start honoring the inline keyword.
> The problem is that it inlines everything and creates code bloat.
hmm, I'll be wanting to see how you solve the call stack problem :-)
> So far it is working well enough and there ar
ron minnich <[EMAIL PROTECTED]> writes:
> On Mon, 21 Jul 2003, YhLu wrote:
>
> > I can build the linuxbios. But it is too large and it is around 60k, and
> > tg3.zelf is about 22k, and tg3--ide_disk.zelf is about 24k, then the sum is
> > above 65k.So I can not build the images.
>
> I now routine
512-96k. or that's to say change several 65536 to 96*1024??
It that right?
Regards
Yinghai Lu
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月21日 14:49
收件人: YhLu
抄送: [EMAIL PROTECTED]; Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: 答复: K8 + 2.4.21 + Tyan S2880
On Mon, 2
Ron,
So fallback image will be 96K?
Regards
Yinghai Lu
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年7月21日 14:45
收件人: YhLu
抄送: [EMAIL PROTECTED]; Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: K8 + 2.4.21 + Tyan S2880
On Mon, 21 Jul 2003, YhLu wrote:
> I can build
On Mon, 21 Jul 2003, YhLu wrote:
> So fallback image will be 96K?
that's how I'm doing it. With a 1 Mbyte flash I don't worry much.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
1 - 100 of 109 matches
Mail list logo
