chard Cochran <
richardcoch...@gmail.com>:
> On Fri, Jun 04, 2021 at 11:05:43PM +0200, Timo Korthals wrote:
> > How do I configure ptp4l to send announce messages using all addresses
> > configured on eth0?
>
> Why would you want to do that?
>
> After all, the PTP
Dear fellows,
consider the NIC eth0 with multiple IP addresse which is configured as
follows:
-- content of /etc/network/interfaces start --
auto lo
iface lo inet loopback
# first config
auto eth0
iface eth0 inet static
address 192.168.1.2
netmask 255.255.255.0
# secon
Variance 0x
# Within 1 us
clockAccuracy 0x23
[enp9s0]
delay_mechanism E2E
network_transport UDPv4
Greetings,
Timo
On 30.06.20 04:37, Timo Korthals wrote:
I've attached the wireshark dump to this message.
On Tuesday, June 30, 2020 04:32 CEST, "Timo Korthals" wrote:
Dear li
Timo
[1] https://www.microchip.com/DevelopmentTools/ProductDetails/PartNO/EVB-LAN7430
[2] https://tekron.com/news/release/1-step-vs-2-step-ptp/
[3]
https://github.com/richardcochran/linuxptp/commit/61c6a708980217119e829e4b41ea2504e673e4fb
--
Timo Korthals, M.Sc.
Universität Bielefeld
AG Kogn
I've attached the wireshark dump to this message.
On Tuesday, June 30, 2020 04:32 CEST, "Timo Korthals"
wrote:
> Dear linuxptp users,
>
> I'd like to set up the EVB-LAN7430 [1] as a PTP grandmaster, which serves the
> system's time to some embedded devic
/ProductDetails/PartNO/EVB-LAN7430
On 15.01.19 19:53, Keller, Jacob E wrote:
-Original Message-----
From: Timo Korthals [mailto:tkorth...@cit-ec.uni-bielefeld.de]
Sent: Tuesday, January 15, 2019 12:21 AM
To: linuxptp-users@lists.sourceforge.net
Subject: Re: [Linuxptp-users] How to properly use two
info/linuxptp-users[https://lists.sourceforge.net/lists/listinfo/linuxptp-users]
___
Linuxptp-users mailing list
Linuxptp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-users
--
Timo Korthals, M.Sc.
Universität Bielefe
-Original Message-
From: Richard Cochran [mailto:richardcoch...@gmail.com]
Sent: Sunday, January 13, 2019 12:57 PM
To: Keller, Jacob E
Cc: Timo Korthals ; linuxptp-
us...@lists.sourceforge.net
Subject: Re: [Linuxptp-users] How to properly use twoStepFlag=0
On Fri, Jan 11, 2019 at 11:09
ernet/cadence
On 13.01.19 21:50, Richard Cochran wrote:
On Fri, Jan 11, 2019 at 06:03:53PM +0100, Timo Korthals wrote:
we try to sync embedded devices, which are only capable of
PTP_TWO_STEP=FALSE (aka twoStepFlag=0 aka one-way-sync aka PTP_Sync=1)
syncing,
Your embedded devices do not comply w
Dear Jake,
thanks for the fast reply:
On 11.01.19 18:49, Keller, Jacob E wrote:
On Fri, 2019-01-11 at 18:03 +0100, Timo Korthals wrote:
Dear ptp4l-devs,
Hi,
we try to sync embedded devices, which are only capable of
PTP_TWO_STEP=FALSE (aka twoStepFlag=0 aka one-way-sync aka
PTP_Sync=1
ogMinPdelayReqInterval is 0
ptp4l[5167.012]: config item /var/run/ptp4l.neighborPropDelayThresh is
2000
ptp4l[5167.012]: config item /var/run/ptp4l.min_neighbor_prop_delay is
-2000
ptp4l[5167.012]: config item (null).uds_address is '/var/run/ptp4l'
ptp4l[5167.012]: port 0: INITIALIZI
11 matches
Mail list logo
