Re: [pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-16 Thread WebDawg
On Thu, Feb 9, 2017 at 10:36 AM, Erik Anderson wrote: > On Tue, Feb 7, 2017 at 11:59 PM, Øyvind 'bolt' Hvidsten > wrote: > > I have an SG-1000 on which I experience very low throughput. > > You're not the only one. > > I received my SG-1000 in mid December and have been going back and > forth wi

Re: [pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-09 Thread Erik Anderson
On Tue, Feb 7, 2017 at 11:59 PM, Øyvind 'bolt' Hvidsten wrote: > I have an SG-1000 on which I experience very low throughput. You're not the only one. I received my SG-1000 in mid December and have been going back and forth with Netgate support since then, trying to troubleshoot the poor perform

Re: [pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-09 Thread WebDawg
I recommend you run iperf tests between pfsense1 <-> pfsense2, then pfsense2 to laptop, then laptop to pfsense1 and see where the bottleneck is next. iperf can be installed as a package on pfsense. On Wed, Feb 8, 2017 at 1:23 AM, Øyvind 'bolt' Hvidsten wrote: > It's from the wan to an internal

Re: [pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-07 Thread Øyvind 'bolt' Hvidsten
It's from the wan to an internal switch. The switch has VLAN's, but there's only one untagged VLAN on this port. The WAN port thus gets a local IP in the 192.168.4.0/24 network. I set the SG-1000's LAN to be in the 172.16 range so as to not conflict with it. That range isn't used elsewhere on m

Re: [pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-07 Thread Øyvind 'bolt' Hvidsten
It would seem to be negotiating for gigabit. My switch also thinks so. Note that the cable to my laptop is not plugged in at the moment, but I'm currently running the speed tests locally through the console. : ifconfig | grep -E "^[a-z0-9]|media:" cpsw0: flags=8843 metric 0 mtu 1500 med

Re: [pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-07 Thread WebDawg
Check the interface settings, is it negotiating, 10mbit? status, interfaces? On Tue, Feb 7, 2017 at 11:59 PM, Øyvind 'bolt' Hvidsten wrote: > I have an SG-1000 on which I experience very low throughput. > > When I plug my laptop to the cable that normally goes into the SG-1000's > WAN port, I g

[pfSense] What am I doing wrong? <10mbit through SG-1000

2017-02-07 Thread Øyvind 'bolt' Hvidsten
I have an SG-1000 on which I experience very low throughput. When I plug my laptop to the cable that normally goes into the SG-1000's WAN port, I get a download speed of roughtly 100mbit (ISP limited) when I run "curl http://ipv4.download.thinkbroadband.com/1GB.zip >/dev/null" Plugging that s