Hi every body
I tried to compile the last version of lyx2 ( beta), I always got the error
:
* The following problems have been detected by configure.
Please check the messages below before running 'make'.
(see the section 'Problems' in the INSTALL file)
** qt 4 library not found !
Hi every body
I tried to compile the last version of lyx2 ( beta), I always got the error
:
* The following problems have been detected by configure.
Please check the messages below before running 'make'.
(see the section 'Problems' in the INSTALL file)
** qt 4 library not found !
Hi every body
I tried to compile the last version of lyx2 ( beta), I always got the error
:
* The following problems have been detected by configure.
Please check the messages below before running 'make'.
(see the section 'Problems' in the INSTALL file)
** qt 4 library not found !
Hi,
I installed lyx-2.0.0Betafrom sourceand from.rpm (for
fedora) on debian i got in both installaltion the error
error while loading shared libraries: libboost_regex-mt.so.1.44.0: cannot
open shared object file: No such file or directory
there is no file called
Hi,
I installed lyx-2.0.0Betafrom sourceand from.rpm (for
fedora) on debian i got in both installaltion the error
error while loading shared libraries: libboost_regex-mt.so.1.44.0: cannot
open shared object file: No such file or directory
there is no file called
Hi,
I installed lyx-2.0.0Betafrom sourceand from.rpm (for
fedora) on debian i got in both installaltion the error
error while loading shared libraries: libboost_regex-mt.so.1.44.0: cannot
open shared object file: No such file or directory
there is no file called
Hi,
Is there a posibility to add spaces in formula, in more elegant manner
than with CTRL+space.
thanks a lot
best regards
bela
Hi,
Before I used latex2html as convertir from latex (lyx) to html
but problems have arisen because of non-maintenance of the logiciel,
Elyxer also seems a good alternative, how to add it to lyx converters
thanks a lot
best regards
bela
Hi,
Is there a posibility to add spaces in formula, in more elegant manner
than with CTRL+space.
thanks a lot
best regards
bela
Hi,
Before I used latex2html as convertir from latex (lyx) to html
but problems have arisen because of non-maintenance of the logiciel,
Elyxer also seems a good alternative, how to add it to lyx converters
thanks a lot
best regards
bela
Hi,
Is there a posibility to add spaces in formula, in more elegant manner
than with CTRL+space.
thanks a lot
best regards
bela
Hi,
Before I used latex2html as convertir from latex (lyx) to html
but problems have arisen because of non-maintenance of the logiciel,
Elyxer also seems a good alternative, how to add it to lyx converters
thanks a lot
best regards
bela
Hi,
I want to add an extra space in enumerate environemnt, I can't find where
the enumerate env is declared ?
for example I modified the lyxcode ( the size : I used \footntesize) with
the following,
renewenvironment{lyxcode}
{\begin{list}{}{
\setlength{\rightmargin}{\leftmargin}
Hi,
I want to add an extra space in enumerate environemnt, I can't find where
the enumerate env is declared ?
for example I modified the lyxcode ( the size : I used \footntesize) with
the following,
renewenvironment{lyxcode}
{\begin{list}{}{
\setlength{\rightmargin}{\leftmargin}
Hi,
I want to add an extra space in enumerate environemnt, I can't find where
the enumerate env is declared ?
for example I modified the lyxcode ( the size : I used \footntesize) with
the following,
renewenvironment{lyxcode}
{\begin{list}{}{
\setlength{\rightmargin}{\leftmargin}
Bonjour,
J ai longtemps utilisé xfig pour obtenir mes schemas, mais je voudrais
quelquechose de plus automatique,
par exemple au lieu de dessiner la courbe sinus manuellement gnuplot le fait
beaucoup mieux et plus vite.
J ai pensé utiliser asymptote ou tikz, ou peut etre un autre? Si
Bonjour,
J ai longtemps utilisé xfig pour obtenir mes schemas, mais je voudrais
quelquechose de plus automatique,
par exemple au lieu de dessiner la courbe sinus manuellement gnuplot le fait
beaucoup mieux et plus vite.
J ai pensé utiliser asymptote ou tikz, ou peut etre un autre? Si
Bonjour,
J ai longtemps utilisé xfig pour obtenir mes schemas, mais je voudrais
quelquechose de plus automatique,
par exemple au lieu de dessiner la courbe sinus manuellement gnuplot le fait
beaucoup mieux et plus vite.
J ai pensé utiliser asymptote ou tikz, ou peut etre un autre? Si
Hi,
I just installed the lyx-1.5beta, I am surprised that no export type
exist specially for latex. If this exists we can do others with commands
( dvips, latex2html ). the right buttons generate only ps, pdf, dvi.
Why is it omitted ??
thanks
Hi,
I have a problem to install both latex-beamer and lyx.
the reason is that each package creates the file beamer.layout, that is
if I installed lyx-common the file is created, and i I try to install
latex-beamer I get error like this
E: /opt/etch/lyx-common_1.5.0~beta1-2_all.deb: trying to
Hi,
I just installed the lyx-1.5beta, I am surprised that no export type
exist specially for latex. If this exists we can do others with commands
( dvips, latex2html ). the right buttons generate only ps, pdf, dvi.
Why is it omitted ??
thanks
Hi,
I have a problem to install both latex-beamer and lyx.
the reason is that each package creates the file beamer.layout, that is
if I installed lyx-common the file is created, and i I try to install
latex-beamer I get error like this
E: /opt/etch/lyx-common_1.5.0~beta1-2_all.deb: trying to
Hi,
I just installed the lyx-1.5beta, I am surprised that no export type
exist specially for latex. If this exists we can do others with commands
( dvips, latex2html ). the right buttons generate only ps, pdf, dvi.
Why is it omitted ??
thanks
Hi,
I have a problem to install both latex-beamer and lyx.
the reason is that each package creates the file beamer.layout, that is
if I installed lyx-common the file is created, and i I try to install
latex-beamer I get error like this
E: /opt/etch/lyx-common_1.5.0~beta1-2_all.deb: trying to
Hi,
I installed the 1.3.6 on debian sarge without problem,
but the 1.4.* version has a bad interface for the
french characteres. There is no problem inside the
window where we wrtite, the problem is in the menu,
problem, I installed them exactly in the same
environment, I mean I remove 1.4.3
just a precision:
I noticed when I ran lyx from terminal, the message
locale FR_fr could not be set
is it for something
thanks for help
bela
__
Sponsored Link
Talk more and pay less. Vonage can
Hi,
I installed the 1.3.6 on debian sarge without problem,
but the 1.4.* version has a bad interface for the
french characteres. There is no problem inside the
window where we wrtite, the problem is in the menu,
problem, I installed them exactly in the same
environment, I mean I remove 1.4.3
just a precision:
I noticed when I ran lyx from terminal, the message
locale FR_fr could not be set
is it for something
thanks for help
bela
__
Sponsored Link
Talk more and pay less. Vonage can
Hi,
I installed the 1.3.6 on debian sarge without problem,
but the 1.4.* version has a bad interface for the
french characteres. There is no problem inside the
window where we wrtite, the problem is in the menu,
problem, I installed them exactly in the same
environment, I mean I remove 1.4.3
just a precision:
I noticed when I ran lyx from terminal, the message "
locale FR_fr could not be set"
is it for something
thanks for help
bela
__
Sponsored Link
Talk more and pay less. Vonage can
Hi,
great it is obsolete, how to switch to another
language!!!
please can you send me a correct file withc replaces
the previous lyxrc, with a correct switching and using
the F12 key for example
thank you very much
bela
--- Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
belahcene
Hi,
great it is obsolete, how to switch to another
language!!!
please can you send me a correct file withc replaces
the previous lyxrc, with a correct switching and using
the F12 key for example
thank you very much
bela
--- Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
belahcene
Hi,
great it is obsolete, how to switch to another
language!!!
please can you send me a correct file withc replaces
the previous lyxrc, with a correct switching and using
the F12 key for example
thank you very much
bela
--- Jean-Marc Lasgouttes
<[EMAIL PROTECTED]> wrote:
> >>
Hi every body,
I ve just check the 1.4.0 version, there are a lot
diff than 1.3.4 and bugs too.
I wnat to switch with F12 to another language, say
arabic, so I uncomment the arabic part in
lyxrc.example and I copied it to lyxrc (I used to do
it without problem since 1.1.6 versiion), it is
working
Hi every body,
I ve just check the 1.4.0 version, there are a lot
diff than 1.3.4 and bugs too.
I wnat to switch with F12 to another language, say
arabic, so I uncomment the arabic part in
lyxrc.example and I copied it to lyxrc (I used to do
it without problem since 1.1.6 versiion), it is
working
Hi every body,
I ve just check the 1.4.0 version, there are a lot
diff than 1.3.4 and bugs too.
I wnat to switch with F12 to another language, say
arabic, so I uncomment the arabic part in
lyxrc.example and I copied it to lyxrc (I used to do
it without problem since 1.1.6 versiion), it is
working
Hi,
I downloaded the last version 1.3.6
tried to install it on debian sarge, where 1.3.4 was
already install ( which came in the sarge disto);
I got errors with fedora compiled
so I tried the source, here also I have problem with
moc, moc2 and other packages !
I don't
Hi,
I downloaded the last version 1.3.6
tried to install it on debian sarge, where 1.3.4 was
already install ( which came in the sarge disto);
I got errors with fedora compiled
so I tried the source, here also I have problem with
moc, moc2 and other packages !
I don't
>
> Hi,
> I downloaded the last version 1.3.6
>
> tried to install it on debian sarge, where 1.3.4 was
> already install ( which came in the sarge disto);
> I got errors with fedora compiled
> so I tried the source, here also I have problem with
> moc, moc2 and other packages !
> I
Hi,
I am looking for a debian binary fro lyx 1.3.5 ?
has someone creat it ?
the last official ( in debian site is 1.3.4) .
thanks alot
bela
__
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
Hi,
I am looking for a debian binary fro lyx 1.3.5 ?
has someone creat it ?
the last official ( in debian site is 1.3.4) .
thanks alot
bela
__
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
Hi,
I am looking for a debian binary fro lyx 1.3.5 ?
has someone creat it ?
the last official ( in debian site is 1.3.4) .
thanks alot
bela
__
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
thank you for reply, But I am using a precompiled lyx.deb, so I can't
recompile it.
In the preferences I check the aspell, but the problem stays.
Another thing, Can I find ispell for french-language?
bela
LyX uses two different ways to try and check your document.
1. If your version of LyX was
thank you for reply, But I am using a precompiled lyx.deb, so I can't
recompile it.
In the preferences I check the aspell, but the problem stays.
Another thing, Can I find ispell for french-language?
bela
LyX uses two different ways to try and check your document.
1. If your version of LyX was
thank you for reply, But I am using a precompiled lyx.deb, so I can't
recompile it.
In the preferences I check the aspell, but the problem stays.
Another thing, Can I find ispell for french-language?
bela
LyX uses two different ways to try and check your document.
1. If your version of LyX was
Hi,
I want to check the spelling for a french document, I want to use aspell
( because there is aspell-fr package) but the lyx always chosses the
ispell ( I coudn't find ispell for french).
thanks for help
bela
Hi,
I want to check the spelling for a french document, I want to use aspell
( because there is aspell-fr package) but the lyx always chosses the
ispell ( I coudn't find ispell for french).
thanks for help
bela
Hi,
I want to check the spelling for a french document, I want to use aspell
( because there is aspell-fr package) but the lyx always chosses the
ispell ( I coudn't find ispell for french).
thanks for help
bela
Hi,
I want to know if lyx support unicode ??
thanks
bela
Hi,
I want to know if lyx support unicode ??
thanks
bela
Hi,
I want to know if lyx support unicode ??
thanks
bela
Hi, every body
I want to install the new release lyx-1.3.5,
unfortunatly there is no binary for debian, I tied
the fedora one, it gives an error (I 've sent a
message to this list), someone said that compilation
is done for RH, OK I agree but I had no problem to
install lyx-1.3.3-1rh9_qt.i386.rpm
Hi, every body
I want to install the new release lyx-1.3.5,
unfortunatly there is no binary for debian, I tied
the fedora one, it gives an error (I 've sent a
message to this list), someone said that compilation
is done for RH, OK I agree but I had no problem to
install lyx-1.3.3-1rh9_qt.i386.rpm
Hi, every body
I want to install the new release lyx-1.3.5,
unfortunatly there is no binary for debian, I tied
the fedora one, it gives an error (I 've sent a
message to this list), someone said that compilation
is done for RH, OK I agree but I had no problem to
install lyx-1.3.3-1rh9_qt.i386.rpm
Hi every body,
I just downloded the lyx-1.3.5-1fc2_qt.i386.rpm and
install it on my debian sarge, there is no error at
the installation step,
however when I run the lyx , it gives an error and
scrash with :
+checking for wasy10... yes (pfb)
removing packages.lst, which is identical to the
--- Lars Gullik Bjønnes [EMAIL PROTECTED] wrote:
belahcene abdelkader [EMAIL PROTECTED] writes:
| Hi every body,
| I just downloded the lyx-1.3.5-1fc2_qt.i386.rpm
and
| install it on my debian sarge, there is no error
at
| the installation step,
That package is for Fedora Core 2
Hi every body,
I just downloded the lyx-1.3.5-1fc2_qt.i386.rpm and
install it on my debian sarge, there is no error at
the installation step,
however when I run the lyx , it gives an error and
scrash with :
+checking for wasy10... yes (pfb)
removing packages.lst, which is identical to the
--- Lars Gullik Bjønnes [EMAIL PROTECTED] wrote:
belahcene abdelkader [EMAIL PROTECTED] writes:
| Hi every body,
| I just downloded the lyx-1.3.5-1fc2_qt.i386.rpm
and
| install it on my debian sarge, there is no error
at
| the installation step,
That package is for Fedora Core 2
Hi every body,
I just downloded the lyx-1.3.5-1fc2_qt.i386.rpm and
install it on my debian sarge, there is no error at
the installation step,
however when I run the lyx , it gives an error and
scrash with :
+checking for wasy10... yes (pfb)
removing packages.lst, which is identical to the
--- Lars Gullik Bjønnes <[EMAIL PROTECTED]> wrote:
> belahcene abdelkader <[EMAIL PROTECTED]> writes:
>
> | Hi every body,
> | I just downloded the lyx-1.3.5-1fc2_qt.i386.rpm
> and
> | install it on my debian sarge, there is no error
> at
> | the i
The lyx 1.3.5 was announced
-
We are pleased to announce the release of LyX 1.3.5.
ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.3.5.tar.gz
-
but in fact nothing is in that site
best regards
bela
=
The lyx 1.3.5 was announced
-
We are pleased to announce the release of LyX 1.3.5.
ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.3.5.tar.gz
-
but in fact nothing is in that site
best regards
bela
=
The lyx 1.3.5 was announced
-
We are pleased to announce the release of LyX 1.3.5.
ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.3.5.tar.gz
-
but in fact nothing is in that site
best regards
bela
=
--- Jean-Pierre Chretien
[EMAIL PROTECTED] wrote:
Date: Wed, 29 Sep 2004 10:13:00 +0200
From: NOEL Yvonnick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: AMSBOOK in french
Hello,
I am playing around with the AMSBOOK class under
Lyx, and have selected
French as the document
--- Nikita V. Youshchenko [EMAIL PROTECTED] wrote:
Hello.
The known problem with lyx-qt + russian locale +
math symbols display (that
causes no math symbols to be displayed if Qt uses
fontconfig) may be
workarounded by starting lyx-qt as
LC_TIME=C lyx-qt
=
--- Nikita V. Youshchenko [EMAIL PROTECTED] wrote:
Hello.
The known problem with lyx-qt + russian locale +
math symbols display (that
causes no math symbols to be displayed if Qt uses
fontconfig) may be
workarounded by starting lyx-qt as
LC_TIME=C lyx-qt
To fix the problem
--- Jean-Pierre Chretien
[EMAIL PROTECTED] wrote:
Date: Wed, 29 Sep 2004 10:13:00 +0200
From: NOEL Yvonnick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: AMSBOOK in french
Hello,
I am playing around with the AMSBOOK class under
Lyx, and have selected
French as the document
--- Nikita V. Youshchenko [EMAIL PROTECTED] wrote:
Hello.
The known problem with lyx-qt + russian locale +
math symbols display (that
causes no math symbols to be displayed if Qt uses
fontconfig) may be
workarounded by starting lyx-qt as
LC_TIME=C lyx-qt
=
--- Nikita V. Youshchenko [EMAIL PROTECTED] wrote:
Hello.
The known problem with lyx-qt + russian locale +
math symbols display (that
causes no math symbols to be displayed if Qt uses
fontconfig) may be
workarounded by starting lyx-qt as
LC_TIME=C lyx-qt
To fix the problem
--- Jean-Pierre Chretien
<[EMAIL PROTECTED]> wrote:
>
> >>Date: Wed, 29 Sep 2004 10:13:00 +0200
> >>From: NOEL Yvonnick <[EMAIL PROTECTED]>
> >>To: [EMAIL PROTECTED]
> >>Subject: AMSBOOK in french
> >>
> >>Hello,
> >>
> >>I am playing around with the AMSBOOK class under
> Lyx, and have selected
--- "Nikita V. Youshchenko" <[EMAIL PROTECTED]> wrote:
> Hello.
>
> The known problem with lyx-qt + russian locale +
> math symbols display (that
> causes no math symbols to be displayed if Qt uses
> fontconfig) may be
> workarounded by starting lyx-qt as
>
> LC_TIME=C lyx-qt
>
>
=
--- "Nikita V. Youshchenko" <[EMAIL PROTECTED]> wrote:
> Hello.
>
> The known problem with lyx-qt + russian locale +
> math symbols display (that
> causes no math symbols to be displayed if Qt uses
> fontconfig) may be
> workarounded by starting lyx-qt as
>
> LC_TIME=C lyx-qt
>
>
To fix
--- Paul A. Rubin [EMAIL PROTECTED] wrote:
Thierry SCHWOERTZIG wrote:
if you use the Qt-version you need latex-xft-font,
install the package latex-xft-fonts-0.1-1.noarch.rpm
hope this solve your problem
bye
bela
Hello.
I have two computer (mandrake 10.0) and i have
installed
--- Paul A. Rubin [EMAIL PROTECTED] wrote:
Thierry SCHWOERTZIG wrote:
if you use the Qt-version you need latex-xft-font,
install the package latex-xft-fonts-0.1-1.noarch.rpm
hope this solve your problem
bye
bela
Hello.
I have two computer (mandrake 10.0) and i have
installed
--- "Paul A. Rubin" <[EMAIL PROTECTED]> wrote:
> Thierry SCHWOERTZIG wrote:
>
if you use the Qt-version you need latex-xft-font,
install the package latex-xft-fonts-0.1-1.noarch.rpm
hope this solve your problem
bye
bela
> > Hello.
> > I have two computer (mandrake 10.0) and i have
>
--
Sorry I missed to attach a file !!!
If the english headers are only in the Lyx windows,
and not in the output file ( dvi or ps) , is not a
problem pardi!!
otherwise , you have to check your preferrence
language in document.
I attach a file containning a lyx format and a ps
format , so you
--
Sorry I missed to attach a file !!!
If the english headers are only in the Lyx windows,
and not in the output file ( dvi or ps) , is not a
problem pardi!!
otherwise , you have to check your preferrence
language in document.
I attach a file containning a lyx format and a ps
format , so you
--
Sorry I missed to attach a file !!!
If the english headers are only in the Lyx windows,
and not in the output file ( dvi or ps) , is not a
problem pardi!!
otherwise , you have to check your preferrence
language in document.
I attach a file containning a lyx format and a ps
format , so you
Hi,
I 've just download and install proper with different
layouts for lyx ( prosper2, dekel and weiss )
While layout-Dekel-fancy.lyx and
layout_Weiss-fancy.lyx run correctly whithout error;
other files (layout-sample for both dekel and weiss )
give error like ( certainly the problem with
Hi,
I 've just download and install proper with different
layouts for lyx ( prosper2, dekel and weiss )
While layout-Dekel-fancy.lyx and
layout_Weiss-fancy.lyx run correctly whithout error;
other files (layout-sample for both dekel and weiss )
give error like ( certainly the problem with
Hi,
I 've just download and install proper with different
layouts for lyx ( prosper2, dekel and weiss )
While layout-Dekel-fancy.lyx and
layout_Weiss-fancy.lyx run correctly whithout error;
other files (layout-sample for both dekel and weiss )
give error like ( certainly the problem with
hi,
I would like to get lyx1.3.3 with xforms not qt.
I have a problem in the arabic font on lyx 1.3.3. When
I take the same file on lyx 1.1.6 and choose the
arabic model, the arabic characters are correctly
displayed in the screen ( lyx screen), but not on the
lyx_1.3.3.
The latex file exported
hi,
I would like to get lyx1.3.3 with xforms not qt.
I have a problem in the arabic font on lyx 1.3.3. When
I take the same file on lyx 1.1.6 and choose the
arabic model, the arabic characters are correctly
displayed in the screen ( lyx screen), but not on the
lyx_1.3.3.
The latex file exported
hi,
I would like to get lyx1.3.3 with xforms not qt.
I have a problem in the arabic font on lyx 1.3.3. When
I take the same file on lyx 1.1.6 and choose the
arabic model, the arabic characters are correctly
displayed in the screen ( lyx screen), but not on the
lyx_1.3.3.
The latex file exported
hi,
I 've installed the lyx 1.1.6 without problem in
redhat 7.2.
When I tryed to install the lyx-1.2.0-1.i386.rpm the
following message is outed
libstdc++-libc6.1-2.so.3
This library refers to and older version of redhat (
6.x). I tried to install this library , but there is
hi,
I 've installed the lyx 1.1.6 without problem in
redhat 7.2.
When I tryed to install the lyx-1.2.0-1.i386.rpm the
following message is outed
libstdc++-libc6.1-2.so.3
This library refers to and older version of redhat (
6.x). I tried to install this library , but there is
hi,
I 've installed the lyx 1.1.6 without problem in
redhat 7.2.
When I tryed to install the lyx-1.2.0-1.i386.rpm the
following message is outed
libstdc++-libc6.1-2.so.3
This library refers to and older version of redhat (
6.x). I tried to install this library , but there is
hi,
I noticed that Lyx save the center paragraph with
centering and at the end it adds \par. Is it possible
to use instead \centerline and whitout \par command ?
Because in the arabic environment \centering and \par
are not recognized, and I must correct the texfile
manually, to delete \par and
hi,
I noticed that Lyx save the center paragraph with
centering and at the end it adds \par. Is it possible
to use instead \centerline and whitout \par command ?
Because in the arabic environment \centering and \par
are not recognized, and I must correct the texfile
manually, to delete \par and
hi,
I noticed that Lyx save the center paragraph with
centering and at the end it adds \par. Is it possible
to use instead \centerline and whitout \par command ?
Because in the arabic environment \centering and \par
are not recognized, and I must correct the texfile
manually, to delete \par and
hi,
thanks for lyx developpers for this nice software,
however there are some bugs , I think? I whish they
will be fixed in the next versions. (I use the latest
one 1.1.6 fix4 )
1.-- When you change a layout, say, the paragraph
style, the new opened window stays over the main
window, you must
hi,
thanks for lyx developpers for this nice software,
however there are some bugs , I think? I whish they
will be fixed in the next versions. (I use the latest
one 1.1.6 fix4 )
1.-- When you change a layout, say, the paragraph
style, the new opened window stays over the main
window, you must
hi,
thanks for lyx developpers for this nice software,
however there are some bugs , I think? I whish they
will be fixed in the next versions. (I use the latest
one 1.1.6 fix4 )
1.-- When you change a layout, say, the paragraph
style, the new opened window stays over the main
window, you must
hello sir,
please would you help me. I send my message to many
people no one answers.
I use opera ( sometimes netcape) under Linux (redhat
7.0 and mandrake 8.0 ). When I try to enter arabic
website, (for exemple : www.ahram-eg.com) I have font
problem.
On windows with net explorer, there is
hello sir,
please would you help me. I send my message to many
people no one answers.
I use opera ( sometimes netcape) under Linux (redhat
7.0 and mandrake 8.0 ). When I try to enter arabic
website, (for exemple : www.ahram-eg.com) I have font
problem.
On windows with net explorer, there is
hello sir,
please would you help me. I send my message to many
people no one answers.
I use opera ( sometimes netcape) under Linux (redhat
7.0 and mandrake 8.0 ). When I try to enter arabic
website, (for exemple : www.ahram-eg.com) I have font
problem.
On windows with net explorer, there is
hi everybody,
I have used arabic support in lyx1.1.5, (redhat 6.0 )
whithout big problem.
I only copied (thank you dekel ) the lyxrc.example to
my lyx Home and changing the corresponding lines to
the arabic support. (I used arabtex )
Now, with Lyx 1.1.6, I try do the same thing but the
program
hi everybody,
I have used arabic support in lyx1.1.5, (redhat 6.0 )
whithout big problem.
I only copied (thank you dekel ) the lyxrc.example to
my lyx Home and changing the corresponding lines to
the arabic support. (I used arabtex )
Now, with Lyx 1.1.6, I try do the same thing but the
program
hi everybody,
I have used arabic support in lyx1.1.5, (redhat 6.0 )
whithout big problem.
I only copied (thank you dekel ) the lyxrc.example to
my lyx Home and changing the corresponding lines to
the arabic support. (I used arabtex )
Now, with Lyx 1.1.6, I try do the same thing but the
program
hi everybody,
I have used arabic support in lyx1.1.5, (redhat 6.0 )
whithout big problem.
I only copied (thank you dekel ) the lyxrc.example to
my lyx Home and changing the corresponding lines to
the arabic support. (I used arabtex )
Now, with Lyx 1.1.6, I try do the same thing but the
program
1 - 100 of 102 matches
Mail list logo