On Sat, 12 Feb 2011 16:32:24 -0600, Saras Saraswathi wrote:
I tried to install the lyx. I installed under windows 7 on two laptops.
One works ( a borrowed laptop) . But it does not work on my own laptop. I
used the same downloaded sw on both. As discussed on the webpage, looks like
it cannot
Joost Verburg joost at lyx.org writes:
On Sat, 12 Feb 2011 16:32:24 -0600, Saras Saraswathi wrote:
I tried to install the lyx. I installed under windows 7 on two laptops.
One works ( a borrowed laptop) ...discussed on the webpage,
According to the screenshots, one of the
On Sat, 12 Feb 2011 16:32:24 -0600, Saras Saraswathi wrote:
I tried to install the lyx. I installed under windows 7 on two laptops.
One works ( a borrowed laptop) . But it does not work on my own laptop. I
used the same downloaded sw on both. As discussed on the webpage, looks like
it cannot
Joost Verburg joost at lyx.org writes:
On Sat, 12 Feb 2011 16:32:24 -0600, Saras Saraswathi wrote:
I tried to install the lyx. I installed under windows 7 on two laptops.
One works ( a borrowed laptop) ...discussed on the webpage,
According to the screenshots, one of the
On Sat, 12 Feb 2011 16:32:24 -0600, Saras Saraswathi wrote:
>>> I tried to install the lyx. I installed under windows 7 on two laptops.
>>> One works ( a borrowed laptop) . But it does not work on my own laptop. I
>>> used the same downloaded sw on both. As discussed on the webpage, looks like
>>>
Joost Verburg lyx.org> writes:
>
> On Sat, 12 Feb 2011 16:32:24 -0600, Saras Saraswathi wrote:
> >>> I tried to install the lyx. I installed under windows 7 on two laptops.
> >>> One works ( a borrowed laptop) ...discussed on the webpage,
>
> According to the screenshots, one of
Hello,
I just tried to install lyx on my windows vista. The first problem was
to install miketex out of the bundle-installer of lyx 1.4.3-5
(lyx-143-5-bundle.exe ) - an Windows API error occurs. a workaround for
this problem was to install miktex 2.5 stand alone and refer to the
existing
Tino Langer schrieb:
I just tried to install lyx on my windows vista. The first problem was
to install miketex out of the bundle-installer of lyx 1.4.3-5
(lyx-143-5-bundle.exe ) - an Windows API error occurs. a workaround for
this problem was to install miktex 2.5 stand alone and refer to the
The MiKTeX shipped with the last installer is not Vista-ready. The next LyX
version comes out next
week with an updated MiKTeX version.
Note that there are stil some restrictions to use MiKTeX under Vista:
http://dojo.miktex.org/blogs/christian_schenk/archive/2007/01/22/miktex25vis
ta.aspx
ok -
Hello,
I just tried to install lyx on my windows vista. The first problem was
to install miketex out of the bundle-installer of lyx 1.4.3-5
(lyx-143-5-bundle.exe ) - an Windows API error occurs. a workaround for
this problem was to install miktex 2.5 stand alone and refer to the
existing
Tino Langer schrieb:
I just tried to install lyx on my windows vista. The first problem was
to install miketex out of the bundle-installer of lyx 1.4.3-5
(lyx-143-5-bundle.exe ) - an Windows API error occurs. a workaround for
this problem was to install miktex 2.5 stand alone and refer to the
The MiKTeX shipped with the last installer is not Vista-ready. The next LyX
version comes out next
week with an updated MiKTeX version.
Note that there are stil some restrictions to use MiKTeX under Vista:
http://dojo.miktex.org/blogs/christian_schenk/archive/2007/01/22/miktex25vis
ta.aspx
ok -
Hello,
I just tried to install lyx on my windows vista. The first problem was
to install miketex out of the bundle-installer of lyx 1.4.3-5
(lyx-143-5-bundle.exe ) - an Windows API error occurs. a workaround for
this problem was to install miktex 2.5 stand alone and refer to the
existing
Tino Langer schrieb:
I just tried to install lyx on my windows vista. The first problem was
to install miketex out of the bundle-installer of lyx 1.4.3-5
(lyx-143-5-bundle.exe ) - an Windows API error occurs. a workaround for
this problem was to install miktex 2.5 stand alone and refer to the
The MiKTeX shipped with the last installer is not Vista-ready. The next LyX
version comes out next
week with an updated MiKTeX version.
Note that there are stil some restrictions to use MiKTeX under Vista:
http://dojo.miktex.org/blogs/christian_schenk/archive/2007/01/22/miktex25vis
ta.aspx
ok -
Hello LyXers,
in the last weeks many users had the problem that after installing LyX on Windows, LyX couldn't be
started, only the error message Missing textclass.lst is displayed.
There was a bug in MIKTeX so that LyX's configuration script wasn't correctly finished when no
internet
Hello LyXers,
in the last weeks many users had the problem that after installing LyX on Windows, LyX couldn't be
started, only the error message Missing textclass.lst is displayed.
There was a bug in MIKTeX so that LyX's configuration script wasn't correctly finished when no
internet
Hello LyXers,
in the last weeks many users had the problem that after installing LyX on Windows, LyX couldn't be
started, only the error message "Missing textclass.lst" is displayed.
There was a bug in MIKTeX so that LyX's configuration script wasn't correctly finished when no
Eric Inazaki wrote:
Bo Peng [EMAIL PROTECTED] writes:
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation
Eric Inazaki wrote:
Bo Peng [EMAIL PROTECTED] writes:
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation
Eric Inazaki wrote:
Bo Peng <[EMAIL PROTECTED]> writes:
On 8/2/06, Eric Inazaki <[EMAIL PROTECTED]> wrote:
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay. Looking through some of these older messages, it
Eric Inazaki wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way.
No, it works fine from C:\Program Files\...
This happened to me on my first
installation attempt. I tried reinstalling to C:\ and
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay.
Paul A. Rubin [EMAIL PROTECTED] writes:
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the
Bo Peng [EMAIL PROTECTED] writes:
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the requisite configuration information. (But it would at
Right after I installed lyx, it spent a lot of time downloading stuff.
Lyx is checking for some classes, miktex does not have them so it
installs them automatically. 1.4.3 will give you more prompt
information, but this process will take the same long time.
Windows being Windows, the most
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay. Looking through some of these older messages, it
Eric Inazaki wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way.
No, it works fine from C:\Program Files\...
This happened to me on my first
installation attempt. I tried reinstalling to C:\ and
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay.
Paul A. Rubin [EMAIL PROTECTED] writes:
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the
Bo Peng [EMAIL PROTECTED] writes:
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the requisite configuration information. (But it would at
Right after I installed lyx, it spent a lot of time downloading stuff.
Lyx is checking for some classes, miktex does not have them so it
installs them automatically. 1.4.3 will give you more prompt
information, but this process will take the same long time.
Windows being Windows, the most
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to "C:\" and that
works okay. Looking through some of these older messages,
Eric Inazaki wrote:
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way.
No, it works fine from C:\Program Files\...
This happened to me on my first
installation attempt. I tried reinstalling to "C:\"
On 8/2/06, Eric Inazaki <[EMAIL PROTECTED]> wrote:
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to "C:\" and that
works
Paul A. Rubin <[EMAIL PROTECTED]> writes:
>
> Eric Inazaki wrote:
>
> Did it give you a message about not finding class files? There have
> been instances where LyX installed properly but the configuration script
> failed, and subsequently LyX would not start because it could not find
> the
Bo Peng <[EMAIL PROTECTED]> writes:
>
> On 8/2/06, Eric Inazaki <[EMAIL PROTECTED]> wrote:
> > Does lyx choke (i.e. fail to start) when it's installed in
> > "C:\Program Files" directory? This is with lyx 1.4.2 and
> > Windows 2000, by the way. This happened to me on my first
> > installation
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the requisite configuration information. (But it would at
> Right after I installed lyx, it spent a lot of time downloading stuff.
Lyx is checking for some classes, miktex does not have them so it
installs them automatically. 1.4.3 will give you more prompt
information, but this process will take the same long time.
Windows being Windows, the most
Hi all,
I am using lyx for a while on windows, and decided today to try the new,
supported ! , windows version. I uninstalled my lyx version the best I
could, and followed the instructions on the Lyx Wiki. Everything seemed fine
until I launch lyx.
Then, while lyx was configuring, just after the
On Tuesday 15 November 2005 22:44, mel b wrote:
and the message is an ImportError for the os module.
This is an indication that something is wrong with your python installation.
I am not saying that this is the only problem or the cause of the others,
but this should not happen in a normal
Hi all,
I am using lyx for a while on windows, and decided today to try the new,
supported ! , windows version. I uninstalled my lyx version the best I
could, and followed the instructions on the Lyx Wiki. Everything seemed fine
until I launch lyx.
Then, while lyx was configuring, just after the
On Tuesday 15 November 2005 22:44, mel b wrote:
and the message is an ImportError for the os module.
This is an indication that something is wrong with your python installation.
I am not saying that this is the only problem or the cause of the others,
but this should not happen in a normal
Hi all,
I am using lyx for a while on windows, and decided today to try the new,
supported ! , windows version. I uninstalled my lyx version the best I
could, and followed the instructions on the Lyx Wiki. Everything seemed fine
until I launch lyx.
Then, while lyx was configuring, just after the
On Tuesday 15 November 2005 22:44, mel b wrote:
> and the message is an ImportError for the os module.
This is an indication that something is wrong with your python installation.
I am not saying that this is the only problem or the cause of the others,
but this should not happen in a
Hello Paul, and all the others who gave suugestions as well
Thanks for the marvellous level of support - way beyond anything I've
ever experienced with commercial software - as well as encouragement.
The problem seems to have been the old version of sed, as well as an
empty version of
Hello Paul, and all the others who gave suugestions as well
Thanks for the marvellous level of support - way beyond anything I've
ever experienced with commercial software - as well as encouragement.
The problem seems to have been the old version of sed, as well as an
empty version of
Hello Paul, and all the others who gave suugestions as well
Thanks for the marvellous level of support - way beyond anything I've
ever experienced with commercial software - as well as encouragement.
The problem seems to have been the old version of sed, as well as an
empty version of
Grateful for help with installing. My level of technical competence is
advanced idiot, so I've assuredly done something wrong.
I think I followed the instruction on the wiki exactly. I installed all
sorts of things one by one and it all looked OK. then at the first
attempt to run lyx I got this
Hei!
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
http://wiki.lyx.org/Windows/LyX136pre
If you are already using the installer for version 1.3.6, be sure it is
the last version (i.e. v.12). The
Nicols a crit:
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
http://wiki.lyx.org/Windows/LyX136pre
Attention! This is a testing release and has BUGS!!! E.g. accents don't
work.
It is
Uwe Sthr wrote:
accents don't work.
Uwe, don't the accents work in general or only in the workarea? I.e., do they
work in the dialog widgets?
Jrgen
I tried that just now. It all installed apparently quite hapily. Then I
got exactly the same error.
Original Message
Nicols wrote
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
Sorry! I guess you are right Uwe. It is just that I am using v1.3.6
without problems (at least no more than those v1.3.5 has), so therefore
I recommended it. But again, you are right, for me works ok, but for
other people, using other features than those I use, it may give problems.
Uwe Sthr
Richard Brown wrote:
I tried that just now. It all installed apparently quite hapily. Then I
got exactly the same error.
I think that I would also suggest that an advanced idiot (;-)) doesn't
use LyX 1.3.6pre just yet. There are some bugs in the underlyxing Qt/Win
Free library that can cause a
Richard Brown wrote:
Grateful for help with installing. My level of technical competence is
advanced idiot,
The advanced part puts you one up on me. :-)
so I've assuredly done something wrong.
I think I followed the instruction on the wiki exactly. I installed all
sorts of things one by one
Thanks for your reply. I didn't intervene in the directory structure at
all as far as I remember, but anyway I renamed the directory where it
was, and ran the installation .exe again. (This was
lyx-1.3.5-win32-nc.exe) with the following result: in C: I now have
C:\lyx
which contains bin, lib, man,
Richard Brown wrote:
Thanks for your reply. I didn't intervene in the directory structure at
all as far as I remember, but anyway I renamed the directory where it
was, and ran the installation .exe again. (This was
lyx-1.3.5-win32-nc.exe) with the following result: in C: I now have
C:\lyx
which
Grateful for help with installing. My level of technical competence is
advanced idiot, so I've assuredly done something wrong.
I think I followed the instruction on the wiki exactly. I installed all
sorts of things one by one and it all looked OK. then at the first
attempt to run lyx I got this
Hei!
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
http://wiki.lyx.org/Windows/LyX136pre
If you are already using the installer for version 1.3.6, be sure it is
the last version (i.e. v.12). The
Nicols a crit:
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
http://wiki.lyx.org/Windows/LyX136pre
Attention! This is a testing release and has BUGS!!! E.g. accents don't
work.
It is
Uwe Sthr wrote:
accents don't work.
Uwe, don't the accents work in general or only in the workarea? I.e., do they
work in the dialog widgets?
Jrgen
I tried that just now. It all installed apparently quite hapily. Then I
got exactly the same error.
Original Message
Nicols wrote
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
Sorry! I guess you are right Uwe. It is just that I am using v1.3.6
without problems (at least no more than those v1.3.5 has), so therefore
I recommended it. But again, you are right, for me works ok, but for
other people, using other features than those I use, it may give problems.
Uwe Sthr
Richard Brown wrote:
I tried that just now. It all installed apparently quite hapily. Then I
got exactly the same error.
I think that I would also suggest that an advanced idiot (;-)) doesn't
use LyX 1.3.6pre just yet. There are some bugs in the underlyxing Qt/Win
Free library that can cause a
Richard Brown wrote:
Grateful for help with installing. My level of technical competence is
advanced idiot,
The advanced part puts you one up on me. :-)
so I've assuredly done something wrong.
I think I followed the instruction on the wiki exactly. I installed all
sorts of things one by one
Thanks for your reply. I didn't intervene in the directory structure at
all as far as I remember, but anyway I renamed the directory where it
was, and ran the installation .exe again. (This was
lyx-1.3.5-win32-nc.exe) with the following result: in C: I now have
C:\lyx
which contains bin, lib, man,
Richard Brown wrote:
Thanks for your reply. I didn't intervene in the directory structure at
all as far as I remember, but anyway I renamed the directory where it
was, and ran the installation .exe again. (This was
lyx-1.3.5-win32-nc.exe) with the following result: in C: I now have
C:\lyx
which
Grateful for help with installing. My level of technical competence is
advanced idiot, so I've assuredly done something wrong.
I think I followed the instruction on the wiki exactly. I installed all
sorts of things one by one and it all looked OK. then at the first
attempt to run lyx I got this
Hei!
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
http://wiki.lyx.org/Windows/LyX136pre
If you are already using the installer for version 1.3.6, be sure it is
the last version (i.e. v.12). The
Nicolás a écrit:
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
http://wiki.lyx.org/Windows/LyX136pre
Attention! This is a testing release and has BUGS!!! E.g. accents don't
work.
It is
Uwe Stöhr wrote:
> accents don't work.
Uwe, don't the accents work in general or only in the workarea? I.e., do they
work in the dialog widgets?
Jürgen
I tried that just now. It all installed apparently quite hapily. Then I
got exactly the same error.
Original Message
Nicolàs wrote
Are you using version 1.3.6? If not, I recommend you use this version.
it comes with ans installer, so life is easier. You can get it from here
Sorry! I guess you are right Uwe. It is just that I am using v1.3.6
without problems (at least no more than those v1.3.5 has), so therefore
I recommended it. But again, you are right, for me works ok, but for
other people, using other features than those I use, it may give problems.
Uwe Stöhr
Richard Brown wrote:
> I tried that just now. It all installed apparently quite hapily. Then I
> got exactly the same error.
I think that I would also suggest that an "advanced idiot" (;-)) doesn't
use LyX 1.3.6pre just yet. There are some bugs in the underlyxing Qt/Win
Free library that can
Richard Brown wrote:
Grateful for help with installing. My level of technical competence is
advanced idiot,
The "advanced" part puts you one up on me. :-)
so I've assuredly done something wrong.
I think I followed the instruction on the wiki exactly. I installed all
sorts of things one by
Thanks for your reply. I didn't intervene in the directory structure at
all as far as I remember, but anyway I renamed the directory where it
was, and ran the installation .exe again. (This was
lyx-1.3.5-win32-nc.exe) with the following result: in C: I now have
C:\lyx
which contains bin, lib, man,
Richard Brown wrote:
Thanks for your reply. I didn't intervene in the directory structure at
all as far as I remember, but anyway I renamed the directory where it
was, and ran the installation .exe again. (This was
lyx-1.3.5-win32-nc.exe) with the following result: in C: I now have
C:\lyx
which
Hi,
I setup Windows XP on my computer (clean install) and so had to setup Lyx
again. However, when I try starting the Cygwin setup program from the
LyxInstall directory, it goes till the root directory (C:/cygwin)
question and then the local package directory (C:/LyxInstall) and then
crashes and
On Sat, Feb 09, 2002, Nirmal Govind wrote:
I setup Windows XP on my computer (clean install) and so had to setup Lyx
again. However, when I try starting the Cygwin setup program from the
LyxInstall directory, it goes till the root directory (C:/cygwin) question
and then the local
Hi,
I setup Windows XP on my computer (clean install) and so had to setup Lyx
again. However, when I try starting the Cygwin setup program from the
LyxInstall directory, it goes till the root directory (C:/cygwin)
question and then the local package directory (C:/LyxInstall) and then
crashes and
On Sat, Feb 09, 2002, Nirmal Govind wrote:
I setup Windows XP on my computer (clean install) and so had to setup Lyx
again. However, when I try starting the Cygwin setup program from the
LyxInstall directory, it goes till the root directory (C:/cygwin) question
and then the local
Hi,
I setup Windows XP on my computer (clean install) and so had to setup Lyx
again. However, when I try starting the Cygwin setup program from the
LyxInstall directory, it goes till the root directory (C:/cygwin)
question and then the local package directory (C:/LyxInstall) and then
crashes and
On Sat, Feb 09, 2002, Nirmal Govind wrote:
>
> I setup Windows XP on my computer (clean install) and so had to setup Lyx
> again. However, when I try starting the Cygwin setup program from the
> LyxInstall directory, it goes till the root directory (C:/cygwin) question
> and then the
87 matches
Mail list logo
