Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at the moment I get:
(TODO:) I still heve to do this
I want:
(TODO: I still have to do this)
How can I achieve this?
2009/12/14 Rainer M Krug r.m.k...@gmail.com:
Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at the moment I get:
(TODO:) I still heve to do this
I want:
(TODO: I
On Mon, Dec 14, 2009 at 11:06 AM, Manveru manv...@manveru.pl wrote:
2009/12/14 Rainer M Krug r.m.k...@gmail.com:
Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at
Vincent van Ravesteijn wrote:
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see
SNIP
This has not been tested but try something along the lines of:
InsetLayout TODO
LyXType custom
LabelString TODO
LatexType command
LatexName
myOwnTodo
Decoration
On Mon, Dec 14, 2009 at 1:03 PM, Rudi van der Linde rudi...@ansys.co.zawrote:
SNIP
This has not been tested but try something along the lines of:
InsetLayout TODO
LyXType custom
LabelString TODO
LatexType command
LatexName
Hi all,
How does one use the Liberation fonts in LyX? These are truetype fonts
metrically identical to Microsoft's main fonts:
Liberation Mono - Courier New
Liberation Sans - Arial
Liberation Serif - Times New Roman
(http://en.wikipedia.org/wiki/Liberation_fonts)
Thanks
SteveT
Steve Litt
On 12/14/2009 02:54 AM, Rainer M Krug wrote:
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM $TODIR/svninfo.txt
###
This might work.
You should put the copier in
2009/12/14 rgheck rgh...@bobjweil.com
On 12/14/2009 02:54 AM, Rainer M Krug wrote:
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM $TODIR/svninfo.txt
###
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set
the copier to execute this script somwehere under FileFormats?
Yes, you have to set the copier under Converters, for
2009/12/14 rgheck rgh...@bobjweil.com
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set the
copier to execute this script somwehere under FileFormats?
Yes, you have to
Hi Steve,
I think that you have one of two options. The first, of course is to
install the fonts onto your system in the normal way and then use XeTeX
to compile the document. If you choose this route, you can assign the
font through the use of the \setfont macros: \setmainfont{font name},
El 13/12/2009 11:33 p.m., rgheck escribió:
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
http://www.math.umanitoba.ca/homepages/au/instructions.html
I assume you have
On 12/14/2009 09:53 AM, Rainer M Krug wrote:
2009/12/14 rgheckrgh...@bobjweil.com
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set the
copier to execute this
On 12/14/2009 10:17 AM, Sergio Celani wrote:
El 13/12/2009 11:33 p.m., rgheck escribió:
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra
Universalis
Hi to all.
I have XeTeX installed and builded in my MikTex installation but I cannot add a
new pdf converter in accord with this instructions from the wiki.
Setting up LyX to work with Xetex
This assumes you have Xetex installed. On my texlive installation, it was
installed automatically. Try
2009/12/14 rgheck rgh...@bobjweil.com
On 12/14/2009 09:53 AM, Rainer M Krug wrote:
2009/12/14 rgheckrgh...@bobjweil.com
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to
Sure, try to start with the minimal attached file
at the prompt, do:
svn add svn.lyx
svn propset svn:keywords Id svn.lyx
svn commit
svn update
then open the file with lyx and view-dvi (or whatever)
it works here
Cheers,
Julien
svn.lyx
Description: Binary data
Anyone recognize this problem in this bug report?
http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=42449
(A screenshot is linked from there too.)
Using wrong fonts for menu and introductory graphic.
Hello to everybody!
I have the following problem to solve in Lyx:
I have a couple of graphics in floats that each fill a whole page. I want that
these pages are inserted as subpages, that is with numberings 40a, 40b, etc.
The reason is that I am writting a thesis with a maximum page limit of
Hi
I new user of Lyx.Before I used Scientific Workplace.
I would like to change the way as Lyx export some latex files.
For example, take the ams article. When Lyx export to latex put
\newtheorem{thm}{Theorem}
\newtheorem{cor}[thm]{Corollary}
but I would like
On 12/14/2009 08:28 PM, Sergio Celani wrote:
Hi
I new user of Lyx.Before I used Scientific Workplace.
I would like to change the way as Lyx export some latex files.
For example, take the ams article. When Lyx export to latex put
\newtheorem{thm}{Theorem}
\newtheorem{cor}[thm]{Corollary}
On Mon, Dec 14, 2009 at 11:44 PM, Julien Rioux julien.ri...@gmail.comwrote:
Sure, try to start with the minimal attached file
at the prompt, do:
svn add svn.lyx
svn propset svn:keywords Id svn.lyx
svn commit
svn update
then open the file with lyx and view-dvi (or whatever)
it works
Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at the moment I get:
(TODO:) I still heve to do this
I want:
(TODO: I still have to do this)
How can I achieve this?
2009/12/14 Rainer M Krug r.m.k...@gmail.com:
Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at the moment I get:
(TODO:) I still heve to do this
I want:
(TODO: I
On Mon, Dec 14, 2009 at 11:06 AM, Manveru manv...@manveru.pl wrote:
2009/12/14 Rainer M Krug r.m.k...@gmail.com:
Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at
Vincent van Ravesteijn wrote:
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see
SNIP
This has not been tested but try something along the lines of:
InsetLayout TODO
LyXType custom
LabelString TODO
LatexType command
LatexName
myOwnTodo
Decoration
On Mon, Dec 14, 2009 at 1:03 PM, Rudi van der Linde rudi...@ansys.co.zawrote:
SNIP
This has not been tested but try something along the lines of:
InsetLayout TODO
LyXType custom
LabelString TODO
LatexType command
LatexName
Hi all,
How does one use the Liberation fonts in LyX? These are truetype fonts
metrically identical to Microsoft's main fonts:
Liberation Mono - Courier New
Liberation Sans - Arial
Liberation Serif - Times New Roman
(http://en.wikipedia.org/wiki/Liberation_fonts)
Thanks
SteveT
Steve Litt
On 12/14/2009 02:54 AM, Rainer M Krug wrote:
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM $TODIR/svninfo.txt
###
This might work.
You should put the copier in
2009/12/14 rgheck rgh...@bobjweil.com
On 12/14/2009 02:54 AM, Rainer M Krug wrote:
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM $TODIR/svninfo.txt
###
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set
the copier to execute this script somwehere under FileFormats?
Yes, you have to set the copier under Converters, for
2009/12/14 rgheck rgh...@bobjweil.com
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set the
copier to execute this script somwehere under FileFormats?
Yes, you have to
Hi Steve,
I think that you have one of two options. The first, of course is to
install the fonts onto your system in the normal way and then use XeTeX
to compile the document. If you choose this route, you can assign the
font through the use of the \setfont macros: \setmainfont{font name},
El 13/12/2009 11:33 p.m., rgheck escribió:
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
http://www.math.umanitoba.ca/homepages/au/instructions.html
I assume you have
On 12/14/2009 09:53 AM, Rainer M Krug wrote:
2009/12/14 rgheckrgh...@bobjweil.com
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set the
copier to execute this
On 12/14/2009 10:17 AM, Sergio Celani wrote:
El 13/12/2009 11:33 p.m., rgheck escribió:
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra
Universalis
Hi to all.
I have XeTeX installed and builded in my MikTex installation but I cannot add a
new pdf converter in accord with this instructions from the wiki.
Setting up LyX to work with Xetex
This assumes you have Xetex installed. On my texlive installation, it was
installed automatically. Try
2009/12/14 rgheck rgh...@bobjweil.com
On 12/14/2009 09:53 AM, Rainer M Krug wrote:
2009/12/14 rgheckrgh...@bobjweil.com
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to
Sure, try to start with the minimal attached file
at the prompt, do:
svn add svn.lyx
svn propset svn:keywords Id svn.lyx
svn commit
svn update
then open the file with lyx and view-dvi (or whatever)
it works here
Cheers,
Julien
svn.lyx
Description: Binary data
Anyone recognize this problem in this bug report?
http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=42449
(A screenshot is linked from there too.)
Using wrong fonts for menu and introductory graphic.
Hello to everybody!
I have the following problem to solve in Lyx:
I have a couple of graphics in floats that each fill a whole page. I want that
these pages are inserted as subpages, that is with numberings 40a, 40b, etc.
The reason is that I am writting a thesis with a maximum page limit of
Hi
I new user of Lyx.Before I used Scientific Workplace.
I would like to change the way as Lyx export some latex files.
For example, take the ams article. When Lyx export to latex put
\newtheorem{thm}{Theorem}
\newtheorem{cor}[thm]{Corollary}
but I would like
On 12/14/2009 08:28 PM, Sergio Celani wrote:
Hi
I new user of Lyx.Before I used Scientific Workplace.
I would like to change the way as Lyx export some latex files.
For example, take the ams article. When Lyx export to latex put
\newtheorem{thm}{Theorem}
\newtheorem{cor}[thm]{Corollary}
On Mon, Dec 14, 2009 at 11:44 PM, Julien Rioux julien.ri...@gmail.comwrote:
Sure, try to start with the minimal attached file
at the prompt, do:
svn add svn.lyx
svn propset svn:keywords Id svn.lyx
svn commit
svn update
then open the file with lyx and view-dvi (or whatever)
it works
Hi
I created myself a TODO module, which adds text in green to the text
(below). it works nicely,, but I would like to have brackests arount the
TODO: and the text, i.e., at the moment I get:
(TODO:) I still heve to do this
I want:
(TODO: I still have to do this)
How can I achieve this?
2009/12/14 Rainer M Krug :
> Hi
>
> I created myself a TODO module, which adds text in green to the text
> (below). it works nicely,, but I would like to have brackests arount the
> TODO: and the text, i.e., at the moment I get:
>
> (TODO:) I still heve to do this
>
> I want:
>
On Mon, Dec 14, 2009 at 11:06 AM, Manveru wrote:
> 2009/12/14 Rainer M Krug :
> > Hi
> >
> > I created myself a TODO module, which adds text in green to the text
> > (below). it works nicely,, but I would like to have brackests arount the
> > TODO: and the
Vincent van Ravesteijn wrote:
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see
This has not been tested but try something along the lines of:
InsetLayout TODO
LyXType custom
LabelString TODO
LatexType command
LatexName
myOwnTodo
Decoration
On Mon, Dec 14, 2009 at 1:03 PM, Rudi van der Linde wrote:
>
> This has not been tested but try something along the lines of:
>
> InsetLayout TODO
>LyXType custom
>LabelString TODO
>LatexType command
>
Hi all,
How does one use the Liberation fonts in LyX? These are truetype fonts
metrically identical to Microsoft's main fonts:
Liberation Mono -> Courier New
Liberation Sans -> Arial
Liberation Serif -> Times New Roman
(http://en.wikipedia.org/wiki/Liberation_fonts)
Thanks
SteveT
Steve Litt
On 12/14/2009 02:54 AM, Rainer M Krug wrote:
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM> $TODIR/svninfo.txt
###
This might work.
You should put the copier in
2009/12/14 rgheck
> On 12/14/2009 02:54 AM, Rainer M Krug wrote:
>
>> Sorry - the copier should read:
>>
>> ###
>> #!/bin/bash
>>
>> FROM=$1
>>
>> TO=$2
>> TODIR=`dirname $TO`
>>
>> svn info $FROM> $TODIR/svninfo.txt
>>
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set
the copier to execute this script somwehere under FileFormats?
Yes, you have to set the copier under Converters, for
2009/12/14 rgheck
> On 12/14/2009 09:41 AM, Rainer M Krug wrote:
>
>>
>> I save it in ~/.lyx/scripts/ but it is not executed.
>>
>> Do I have to set it somewhere to execute the script? Do I have to set the
>> copier to execute this script somwehere under FileFormats?
>>
>>
Hi Steve,
I think that you have one of two options. The first, of course is to
install the fonts onto your system in the normal way and then use XeTeX
to compile the document. If you choose this route, you can assign the
font through the use of the \setfont macros: \setmainfont{font name},
El 13/12/2009 11:33 p.m., rgheck escribió:
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
http://www.math.umanitoba.ca/homepages/au/instructions.html
I assume you have
On 12/14/2009 09:53 AM, Rainer M Krug wrote:
2009/12/14 rgheck
On 12/14/2009 09:41 AM, Rainer M Krug wrote:
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it somewhere to execute the script? Do I have to set the
copier to execute this
On 12/14/2009 10:17 AM, Sergio Celani wrote:
El 13/12/2009 11:33 p.m., rgheck escribió:
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra
Universalis
Hi to all.
I have XeTeX installed and builded in my MikTex installation but I cannot add a
new pdf converter in accord with this instructions from the wiki.
Setting up LyX to work with Xetex
This assumes you have Xetex installed. On my texlive installation, it was
installed automatically. Try
2009/12/14 rgheck
> On 12/14/2009 09:53 AM, Rainer M Krug wrote:
>
>> 2009/12/14 rgheck
>>
>>
>>
>>> On 12/14/2009 09:41 AM, Rainer M Krug wrote:
>>>
>>>
>>>
I save it in ~/.lyx/scripts/ but it is not executed.
Do I have to set it
Sure, try to start with the minimal attached file
at the prompt, do:
svn add svn.lyx
svn propset svn:keywords "Id" svn.lyx
svn commit
svn update
then open the file with lyx and view->dvi (or whatever)
it works here
Cheers,
Julien
svn.lyx
Description: Binary data
Anyone recognize this problem in this bug report?
http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=42449
(A screenshot is linked from there too.)
Using wrong fonts for menu and introductory graphic.
Hello to everybody!
I have the following problem to solve in Lyx:
I have a couple of graphics in floats that each fill a whole page. I want that
these pages are inserted as subpages, that is with numberings 40a, 40b, etc.
The reason is that I am writting a thesis with a maximum page limit of
Hi
I new user of Lyx.Before I used Scientific Workplace.
I would like to change the way as Lyx export some latex files.
For example, take the ams article. When Lyx export to latex put
\newtheorem{thm}{Theorem}
\newtheorem{cor}[thm]{Corollary}
but I would like
On 12/14/2009 08:28 PM, Sergio Celani wrote:
Hi
I new user of Lyx.Before I used Scientific Workplace.
I would like to change the way as Lyx export some latex files.
For example, take the ams article. When Lyx export to latex put
\newtheorem{thm}{Theorem}
\newtheorem{cor}[thm]{Corollary}
On Mon, Dec 14, 2009 at 11:44 PM, Julien Rioux wrote:
> Sure, try to start with the minimal attached file
>
> at the prompt, do:
>
> svn add svn.lyx
> svn propset svn:keywords "Id" svn.lyx
> svn commit
> svn update
>
> then open the file with lyx and view->dvi (or
69 matches
Mail list logo