I have the tools package which includes the file multicol.sty
2011/7/7 Marcelo Acuña
>> According to something else I read somewhere,
> >I was supposed to insert \usepackage{multicol}
> > in the document preamble, which I did. Now I get the following errors:
>
> This work very well for me.
On Fri, Jul 8, 2011 at 12:40 AM, Michael Joyner wrote:
>>
>>
>> If you read the output from latex (yes, there's a lot of output and quite
>> little of it is relevant), it will tell you when it needs to be rerun. LyX
>> catches those messages and runs latex again, until the number of latex runs
>>
> According to something else I read somewhere, >I was supposed to insert
> \usepackage{multicol}> in the document preamble, which I did. Now I get the
> following errors:
This work very well for me. Do you have installed the multicol package?
Marcelo
> > If others think the same, I will add it to the bug
> tracker as a feature
> > request - but are there any comments?
>
I work with outline always open.
This is fine for me.
I have the hope of which if this feature is implemented, to be optional, not
to recharge the area where I write.
Marc
> > Dear Lyx users,
> > writing a book, I chose the book class for my main
> document. Within
> > this document, I introduced "Part" level. The text
> after this
> > level is automatically put in the next page. I'd like
> to get a
> > little text paragraph of description under each part
> title whi
> > (1) The open-save-print group: in each case there's a
> white
> > square/rectangle above a darker square/rectangle. In
> the old (classic)
> > icon set, the icons for open and print are on the
> diagonal. Could that
> > be done here to make a clearer distinction?
>
> > (2) The emphasis-noun
>
>
>
> If you read the output from latex (yes, there's a lot of output and quite
> little of it is relevant), it will tell you when it needs to be rerun. LyX
> catches those messages and runs latex again, until the number of latex runs
> is exactly sufficient to produce the final output.
>
Not al
On Thu, Jul 7, 2011 at 1:36 PM, wrote:
> Actually, it doesn't work with these two packages... :(
> My new theory is that it's connected with the math font. I can produce the
> error with a very small document just same text + math. Everything seems to
> work with a figure... Any ideas? How can I
On 07/07/2011 4:53 PM, Richard Opheim wrote:
Following the instructions in Help-Specific Manuals-Multicolumn Manual, I
placed the ERT commands \begin{multicols} {2} and \end{multicols} around a
body of text that I wanted to appear in double columns.
The script doesn't run and the following messag
After upgrading from version 1.6 to 2.0 (Windows Vista), I no longer
have access to the words the system recorded whenever I checked
spelling and told it to "Add" a word it flagged as misspelled. I have
no idea where those words were stored. Is there a way I can get
version 2.0 to use them?
Any he
Following the instructions in Help-Specific Manuals-Multicolumn Manual, I
placed the ERT commands \begin{multicols} {2} and \end{multicols} around a
body of text that I wanted to appear in double columns.
The script doesn't run and the following message appears:
Errors:
LaTex Error: Environment mu
On Thu, Jul 7, 2011 at 7:16 PM, Vito 'ZeD' De Tullio
wrote:
> Rainer M Krug wrote:
>
>> What I am wondering: why haven't I seen this feature in text editors?
>
> text editors don't have structure :D
>
It depends on the file that you're editing. ;)
However, some time ago a 'narrowing' feature has b
On 07/07/2011 1:42 PM, Holger wrote:
Hey there,
I have a highly customized LaTeX preamble.
Now the file won't compile unless I put the packages in the right order.
For example, I need to use
\usepackage[adobe-utopia]{mathdesign}
before I can use
\usepackage{amsthm}
\usepackage{amsmath}
How can
Hey there,
I have a highly customized LaTeX preamble.
Now the file won't compile unless I put the packages in the right order.
For example, I need to use
\usepackage[adobe-utopia]{mathdesign}
before I can use
\usepackage{amsthm}
\usepackage{amsmath}
How can I do that with LyX? I couldn't find
Actually, it doesn't work with these two packages... :(
My new theory is that it's connected with the math font. I can produce the
error with a very small document just same text + math. Everything seems to
work with a figure... Any ideas? How can I handle with math font problem?
Thanks!
--
Em
Rainer M Krug wrote:
> What I am wondering: why haven't I seen this feature in text editors?
text editors don't have structure :D
> If others think the same, I will add it to the bug tracker as a feature
> request - but are there any comments?
FYI the bug already is in the tracker: http://www.l
On 25/06/2011 7:51 PM, Steve Litt wrote:
Most of the solution was that I ran the latex command too few times --
two instead of three (or maybe more). If someone writes the list with
evidence that a LyX-internal compile acts differently than a sequence
of equivalent commands, ask him to run latex
Uwe Stöhr web.de> writes:
>
> Am 03.09.2010 14:06, schrieb Evan Mason:
>
> >> The TeX system on Linux should be TeXLive and TeXLive comes with a
> >> graphical interface to install LaTeX-packages. So after putting the cls-
> >> and sty-files to tex/latex/agutex you should be able to use the TeX
On 28/06/2011 12:30 PM, Wei-Dong Lian wrote:
Hi everyone,
Thanks a lot for the contribution work by lyx team. I have written my thesis
and articles in lyx for a long time. I found it the best frontend of latex,
for tables and equations. This is the advantage of lyx, and also lyx is
an integrated
On 24/06/2011 3:05 PM, Liviu Andronic wrote:
On Fri, Jun 24, 2011 at 7:30 PM, Gustavo Goretkin
wrote:
I've successfully used the Preview Inset to display qtrees. Can I use it for
PSTricks too?
PSTricks features the big drawback that it is incompatible with
pdflatex. I'm not sure how the Prev
On 27/06/2011 3:29 PM, Guenter Milde wrote:
On 2011-06-27, Fernando Basso wrote:
Lyx help mentions: Document -> Settings -> Text_Layout -> Indent or
Skip. I can't
find it (lyx 1.6.10 - arch linux).
Strange. If I start my LyX 1.6.x with English locale, its under
Document -> Settings -> T
On 01/07/2011 10:27 AM, zyc04 wrote:
Dear all,
I am using LyX2.0 to submit a paper to IEEE conference. The IEEEtran template
accompanied with LyX is used.
My question is:
1) how to add two affiliations to one author, i.e. AuthorName{1,2} and {1,2}
should be in superscript form.
The correspon
On 06/07/2011 12:04 PM, Sebastian Krämer wrote:
Hello there!
I'm supposed to write a report (mokay) and use a custom template/class
for that (nah..). So while my report by lyx was looking great, now I
have to adopt and port from article to the custom latex class that was
provided for me.
Now, I
On 27/06/2011 3:33 PM, Guenter Milde wrote:
On 2011-06-27, Richard Heck wrote:
On 06/27/2011 10:13 AM, Andrew Steele wrote:
I am using the bm package in conjunction with LyX, and my document
recently started failing to build, complaining of too many math
alphabets. This can be fixed by limiting
Hello:
Is it possible to change the top margin for one page only in lyx/latex?
I googled and found package(s) changepage/chngpage. But this seems to
allow changing the side margins only as I understand correctly. Also found that
the \newgeometry command of the geometry package can be used. But i
Hello,
I'd like to have a bibliography at the end of each chapter of a report.
What package must I use (chapterbib, bibunits...), how can I use it in LyX.
Best regards.
On 07/07/2011 03:12 AM, Julio Rojas wrote:
> I had exactly this same problem a couple of days ago and I had to
> leave the part after the "#" sign out.
>
I think the # has to be escaped somehow...?
Bummer about the dengue fever!
rh
On Thu, Jul 7, 2011 at 3:53 PM, Liviu Andronic wrote:
> Hello
>
> On Thu, Jul 7, 2011 at 3:05 PM, Rainer M Krug wrote:
> > Hi
> > Apart from LyX, am using quite extensively emacs with org-mode for
> literate
> > programming and keeping track of documentation in my programs. One
> feature
> > whic
Hello
On Thu, Jul 7, 2011 at 3:05 PM, Rainer M Krug wrote:
> Hi
> Apart from LyX, am using quite extensively emacs with org-mode for literate
> programming and keeping track of documentation in my programs. One feature
> which I love about org-mode is folding: I can fold all sections I am not
> w
Hi
Apart from LyX, am using quite extensively emacs with org-mode for literate
programming and keeping track of documentation in my programs. One feature
which I love about org-mode is folding: I can fold all sections I am not
working on at the moment, and can unfold all headings apart from the bo
Osiyo Nigada!
I have a LyX document that I have to preview twice in a row for the page
numbering to be correctly matched up between the PDF and the printed
document.
In a new session, on first view, I can be on printed page 63, but the PDF
page number is 65.
I close the preview PDF.
Without doing
I had exactly this same problem a couple of days ago and I had to leave the
part after the "#" sign out.
-
Julio Rojas
jcredbe...@gmail.com
On Thu, Jul 7, 2011 at 8:38 AM, Louis Turk wrote:
> Hi everyone,
>
>
> http://www.usc.edu/schools/college/
32 matches
Mail list logo