Re: Missing Rnw(knitr) module
Hello Murat!
Your idea seems to have worked. The *sudo update R *seems to have worked
but apparently, despite RStudio and RKwark seeming to find knitr I did a
install.packages("knitr") at root level and R installed it.
LyX seems to be finding knitr now. I just ran a couple of simple-minded
plots with no problem.
I have never had to do anything like this before upgrading. I still think I
have a slightly wonky Ubuntu installation but I can live with it for a
little while. I am still seriously considering reverting to 16.04 though.
Thank you very,very much.
On 23 August 2017 at 11:10, Murat Yildizoglu wrote:
> Hi John,
>
> I understand, that is weird indeed. To me
>
> lib = "/usr/lib/R/site-library"' is not writable
> Would you like to use a personal library instead? (y/n) y
>
> messages seem to indicate that you do not have the necessary
> authorizations for writing to these folders. Have you tried to launch R as
> sudo and try to install knitr and the updates? If this is only an
> authorization issue, that should work, no? Then it would be nice to become
> root and give to the normal user the full writes to these folders.
>
> My two cents.
>
> Murat
>
> 2017-08-23 16:44 GMT+02:00 John Kane :
>
>> Hi Murat,
>> Both RKward and RStudio indicate that they are loading knitr so I think I
>> have it installed but if I try running R from the terminal I get >
>> library(knitr)
>> *Error in library(knitr) : there is no package called ‘knitr’ *so, at
>> present, my response is "I have no idea".
>>
>> I just tried to do a new update.packages() in R and end up getting this
>> weird result
>>
>> lib = "/usr/lib/R/site-library"' is not writable
>> Would you like to use a personal library instead? (y/n) y
>> Would you like to create a personal library
>> NA
>> to install packages into?
>>
>> I am coming to the conclusion that I don't have a LyX problem, I have an
>> Ubuntu 17.04 upgrade problem. If I can find my old Ubuntu 16.04 usb stick I
>> think I will do a complete clean install and hope for the best.
>>
>> If all goes well, I should have everything reinstalled and running in a
>> few hours. Oh what fun :(
>>
>>
>> On 23 August 2017 at 02:54, Murat Yildizoglu wrote:
>>
>>> Hi John,
>>> I have not followed the whole thread so, maybe you have already
>>> indicated it : have you also installed the latex package for knitR?
>>>
>>> Prof. Murat Yildizoglu
>>>
>>> Note: Please use the following address as such
>>>
>>> UNIVERSITE DE BORDEAUX
>>> GREThA (UMR CNRS 5113)
>>> MURAT YILDIZOGLU
>>> 16 AVENUE LEON DUGUIT
>>> CS 50057
>>> 33608 PESSAC CEDEX
>>> FRANCE
>>>
>>> Bureau : E-331
>>>
>>> mail: murat.yildizoglu at u-bordeaux.fr
>>>
>>> web: www.yildizoglu.fr
>>>
>>> Le 22 août 2017 à 21:56 +0200, John Kane , a écrit
>>> :
>>>
>>> Just as a minor follow-up the knitr.module is in usr/share/lux/layouts.
>>> So I have knitr installed in R and the knitr.module in LyX.
>>>
>>> Presumably I'm missing something obvious but what?
>>>
>>> On 22 August 2017 at 11:14, John Kane wrote:
>>>
Yes. I really have no idea of where some of those ppa's have come from
and I may just go in and wipe out anything that's in the file and hope for
the best. I can always replace those that I really need.(I hope.)
Someone else may have another idea that may help also.
I did discover that I can compile a LaTeX file with knitr---which does
not work but at least it does not bomb. However, I have no idea what that
means.
On 22 August 2017 at 10:55, Jean-Marc Lasgouttes
wrote:
> Le 22/08/2017 à 16:35, John Kane a écrit :
>
>> /sudo apt update
>> /
>> Yes, ran it just before I ran the code listed above. I don't remember
>> any warnings but I had someone talking to me as I did it and so I may
>> have
>> missed one.
>>
>> Bloody hell! I missed the equivalent of an atom bomb going off.
>> Unfortunately I am not sure how to start to approach this for a solution.
>>
>
> That looks bad indeed... I am not sure why you need all these ppas, I
> would try to remove them unless you are sure that you should use them.
>
> I cannot really advise you on how to fix this kind of mess. It is
> probably 2 or 3 commands, but which ones?
>
> JMarc
>
>
--
John Kane
Kingston ON Canada
>>>
>>>
>>>
>>> --
>>> John Kane
>>> Kingston ON Canada
>>>
>>>
>>
>>
>> --
>> John Kane
>> Kingston ON Canada
>>
>
>
>
> --
> Prof. Murat Yildizoglu
>
> Université Montesquieu Bordeaux IV
> GREThA (UMR CNRS 5113)
> Avenue Léon Duguit
> 33608 Pessac cedex
> France
>
> Bureau : E-331
>
> mail: murat.yildizoglu at u-bordeaux.fr
>
> web: http://yildizoglu.fr
>
--
John Kane
Kingston ON Canada
Re: Missing Rnw(knitr) module
The former has a smaller footprint than inkscape and works very well for me. ek On 2017-08-23 12:54 , Kornel Benko wrote: > Am Mittwoch, 23. August 2017 um 06:30:37, schrieb John Kane > >> INFO: +checking for "rsvg-convert"... no >> INFO: +checking for "inkscape"... no > > for "rsvg-convert" try > # sudo apt-get install librsvg2-bin > and for "inkscape" > # sudo apt-get install inkscape > > When done, reconfigure lyx. > > Kornel >
Re: Missing Rnw(knitr) module
Blast, forgot to include the text of /etc/apt/sources.list.d/ Contents of /etc/apt/sources.list.d/ --- aims-ubuntu-sagemath-xenial.list aims-ubuntu-sagemath-xenial.list.distUpgrade aims-ubuntu-sagemath-xenial.list.save dropbox.list dropbox.list.distUpgrade dropbox.list.save jasp-uva-ubuntu-jasp-xenial.list jasp-uva-ubuntu-jasp-xenial.list.distUpgrade jasp-uva-ubuntu-jasp-xenial.list.save jonathonf-ubuntu-texlive-2016-zesty.list jonathonf-ubuntu-texlive-zesty.list jonathonf-ubuntu-texlive-zesty.list.save lyx-devel-ubuntu-release-xenial.list lyx-devel-ubuntu-release-xenial.list.distUpgrade lyx-devel-ubuntu-release-xenial.list.save lyx-devel-ubuntu-release-zesty.list lyx-devel-ubuntu-release-zesty.list.save marutter-ubuntu-rrutter-zesty.list marutter-ubuntu-rrutter-zesty.list.save rkward-devel-ubuntu-rkward-stable-cran-zesty.list rkward-devel-ubuntu-rkward-stable-cran-zesty.list.save webupd8team-ubuntu-sublime-text-3-xenial.list webupd8team-ubuntu-sublime-text-3-xenial.list.distUpgrade webupd8team-ubuntu-sublime-text-3-xenial.list.save On 23 August 2017 at 09:01, John Kane wrote: > Oh just had a look at my ppa file "/etc/apt/sources.list.d/" and the > entries seem to have no connection with the errors reported in my last > post. > > Am I missing another ppa file? > > On 23 August 2017 at 08:47, John Kane wrote: > >> Tried a purge (looked successful) and a reconfigure. >> >> Same error. >> ##==## >> >> An error occurred while running: >> >> Rscript --verbose --no-save --no-restore $$s/scripts/lyxknitr.R >> >> "/tmp/lyx_tmpdir.SpjIUqEQ9242/lyx_tmpbuf0/""LyXnewfile1.Rnw" >> >> "/tmp/lyx_tmpdir.SpjIUqEQ9242/lyx_tmpbuf0/""LyXnewfile1.tex" ISO-8859-15 >> >> "/home/jrkrideau/" >> >> 08:22:12.888: Error while exporting format: PDF (pdflatex) >> >> 08:23:02.090: (dialog-toggle progress) >> >> #### >> >> >> I does annoy me that I cannot install Inkscape. I am pretty sure I had it >> installed under Ubuntu 16.04 and an upgrade should not have removed it. >> >> Synaptic is showing a couple of unloaded Inkscape dependencies but not >> the main Inkscape program. >> >> I just tried an reload of the synaptic data base and am getting some >> nasty messages that I have no idea how to interpret. They seem to mirror >> messages I get when doing a *sudo apt update*. >> >> Please see attached screenshot >> >> >> >> On 23 August 2017 at 08:15, Kornel Benko wrote: >> >>> Am Mittwoch, 23. August 2017 um 07:38:45, schrieb John Kane < >>> jrkrid...@gmail.com> >>> > I tried your suggestions. >>> > librsvg2-bin seems to have installed successfully >>> > >>> > Inkscape aborted. >>> > >>> > This is weird indeed. I loaded the ubuntu software gui and it reports >>> that >>> > inkscape is, indeed, installed but I cannot launch it. >>> >>> I would try to purge inkscape first. >>> >>> > On the other hand synaptic is saying that a) it is not installed, and >>> b) is >>> > reporting a problem that I don't know how to resolve. Please see >>> attached >>> > screenshot. >>> >>> I see. >>> But I think, you even don't need inkscape. >>> >>> > I am beginning to wonder if I have a mangeled Ubuntu 17.04 >>> installation or >>> > a corrupt LyX installation or both >>> > ##=## >>> > jrkrideau@jrk-T420:~$ sudo apt-get install inkscape >>> > Reading package lists... Done >>> > Building dependency tree >>> > Reading state information... Done >>> > Package inkscape is not available, but is referred to by another >>> package. >>> > This may mean that the package is missing, has been obsoleted, or >>> > is only available from another source >>> > >>> > E: Package 'inkscape' has no installation candidate >>> > ##=## >>> > >>> >>> Inkscape is only used by lyx, if it is found. >>> >>> Try to reconfigure lyx. >>> >>> Kornel >> >> >> >> >> -- >> John Kane >> Kingston ON Canada >> > > > > -- > John Kane > Kingston ON Canada > -- John Kane Kingston ON Canada
Re: Missing Rnw(knitr) module
Oh just had a look at my ppa file "/etc/apt/sources.list.d/" and the entries seem to have no connection with the errors reported in my last post. Am I missing another ppa file? On 23 August 2017 at 08:47, John Kane wrote: > Tried a purge (looked successful) and a reconfigure. > > Same error. > ##==## > > An error occurred while running: > > Rscript --verbose --no-save --no-restore $$s/scripts/lyxknitr.R > > "/tmp/lyx_tmpdir.SpjIUqEQ9242/lyx_tmpbuf0/""LyXnewfile1.Rnw" > > "/tmp/lyx_tmpdir.SpjIUqEQ9242/lyx_tmpbuf0/""LyXnewfile1.tex" ISO-8859-15 > > "/home/jrkrideau/" > > 08:22:12.888: Error while exporting format: PDF (pdflatex) > > 08:23:02.090: (dialog-toggle progress) > > #### > > > I does annoy me that I cannot install Inkscape. I am pretty sure I had it > installed under Ubuntu 16.04 and an upgrade should not have removed it. > > Synaptic is showing a couple of unloaded Inkscape dependencies but not the > main Inkscape program. > > I just tried an reload of the synaptic data base and am getting some nasty > messages that I have no idea how to interpret. They seem to mirror messages > I get when doing a *sudo apt update*. > > Please see attached screenshot > > > > On 23 August 2017 at 08:15, Kornel Benko wrote: > >> Am Mittwoch, 23. August 2017 um 07:38:45, schrieb John Kane < >> jrkrid...@gmail.com> >> > I tried your suggestions. >> > librsvg2-bin seems to have installed successfully >> > >> > Inkscape aborted. >> > >> > This is weird indeed. I loaded the ubuntu software gui and it reports >> that >> > inkscape is, indeed, installed but I cannot launch it. >> >> I would try to purge inkscape first. >> >> > On the other hand synaptic is saying that a) it is not installed, and >> b) is >> > reporting a problem that I don't know how to resolve. Please see >> attached >> > screenshot. >> >> I see. >> But I think, you even don't need inkscape. >> >> > I am beginning to wonder if I have a mangeled Ubuntu 17.04 installation >> or >> > a corrupt LyX installation or both >> > ##=## >> > jrkrideau@jrk-T420:~$ sudo apt-get install inkscape >> > Reading package lists... Done >> > Building dependency tree >> > Reading state information... Done >> > Package inkscape is not available, but is referred to by another >> package. >> > This may mean that the package is missing, has been obsoleted, or >> > is only available from another source >> > >> > E: Package 'inkscape' has no installation candidate >> > ##=## >> > >> >> Inkscape is only used by lyx, if it is found. >> >> Try to reconfigure lyx. >> >> Kornel > > > > > -- > John Kane > Kingston ON Canada > -- John Kane Kingston ON Canada
Re: Missing Rnw(knitr) module
Tried a purge (looked successful) and a reconfigure. Same error. ##==## An error occurred while running: Rscript --verbose --no-save --no-restore $$s/scripts/lyxknitr.R "/tmp/lyx_tmpdir.SpjIUqEQ9242/lyx_tmpbuf0/""LyXnewfile1.Rnw" "/tmp/lyx_tmpdir.SpjIUqEQ9242/lyx_tmpbuf0/""LyXnewfile1.tex" ISO-8859-15 "/home/jrkrideau/" 08:22:12.888: Error while exporting format: PDF (pdflatex) 08:23:02.090: (dialog-toggle progress) #### I does annoy me that I cannot install Inkscape. I am pretty sure I had it installed under Ubuntu 16.04 and an upgrade should not have removed it. Synaptic is showing a couple of unloaded Inkscape dependencies but not the main Inkscape program. I just tried an reload of the synaptic data base and am getting some nasty messages that I have no idea how to interpret. They seem to mirror messages I get when doing a *sudo apt update*. Please see attached screenshot On 23 August 2017 at 08:15, Kornel Benko wrote: > Am Mittwoch, 23. August 2017 um 07:38:45, schrieb John Kane < > jrkrid...@gmail.com> > > I tried your suggestions. > > librsvg2-bin seems to have installed successfully > > > > Inkscape aborted. > > > > This is weird indeed. I loaded the ubuntu software gui and it reports > that > > inkscape is, indeed, installed but I cannot launch it. > > I would try to purge inkscape first. > > > On the other hand synaptic is saying that a) it is not installed, and b) > is > > reporting a problem that I don't know how to resolve. Please see attached > > screenshot. > > I see. > But I think, you even don't need inkscape. > > > I am beginning to wonder if I have a mangeled Ubuntu 17.04 installation > or > > a corrupt LyX installation or both > > ##=## > > jrkrideau@jrk-T420:~$ sudo apt-get install inkscape > > Reading package lists... Done > > Building dependency tree > > Reading state information... Done > > Package inkscape is not available, but is referred to by another package. > > This may mean that the package is missing, has been obsoleted, or > > is only available from another source > > > > E: Package 'inkscape' has no installation candidate > > ##=## > > > > Inkscape is only used by lyx, if it is found. > > Try to reconfigure lyx. > > Kornel -- John Kane Kingston ON Canada
Re: Missing Rnw(knitr) module
Am Mittwoch, 23. August 2017 um 07:38:45, schrieb John Kane > I tried your suggestions. > librsvg2-bin seems to have installed successfully > > Inkscape aborted. > > This is weird indeed. I loaded the ubuntu software gui and it reports that > inkscape is, indeed, installed but I cannot launch it. I would try to purge inkscape first. > On the other hand synaptic is saying that a) it is not installed, and b) is > reporting a problem that I don't know how to resolve. Please see attached > screenshot. I see. But I think, you even don't need inkscape. > I am beginning to wonder if I have a mangeled Ubuntu 17.04 installation or > a corrupt LyX installation or both > ##=## > jrkrideau@jrk-T420:~$ sudo apt-get install inkscape > Reading package lists... Done > Building dependency tree > Reading state information... Done > Package inkscape is not available, but is referred to by another package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > > E: Package 'inkscape' has no installation candidate > ##=## > Inkscape is only used by lyx, if it is found. Try to reconfigure lyx. Kornel signature.asc Description: This is a digitally signed message part.
Re: Missing Rnw(knitr) module
That screenshot is rather small. Perhaps this cropped one will be better On 23 August 2017 at 07:38, John Kane wrote: > I tried your suggestions. > librsvg2-bin seems to have installed successfully > > Inkscape aborted. > > This is weird indeed. I loaded the ubuntu software gui and it reports > that inkscape is, indeed, installed but I cannot launch it. > > On the other hand synaptic is saying that a) it is not installed, and b) > is reporting a problem that I don't know how to resolve. Please see > attached screenshot. > > I am beginning to wonder if I have a mangeled Ubuntu 17.04 installation or > a corrupt LyX installation or both > ##=## > jrkrideau@jrk-T420:~$ sudo apt-get install inkscape > Reading package lists... Done > Building dependency tree > Reading state information... Done > Package inkscape is not available, but is referred to by another package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > > E: Package 'inkscape' has no installation candidate > ##=## > > > > On 23 August 2017 at 06:54, Kornel Benko wrote: > >> Am Mittwoch, 23. August 2017 um 06:30:37, schrieb John Kane < >> jrkrid...@gmail.com> >> > INFO: +checking for "rsvg-convert"... no >> > INFO: +checking for "inkscape"... no >> >> for "rsvg-convert" try >> # sudo apt-get install librsvg2-bin >> and for "inkscape" >> # sudo apt-get install inkscape >> >> When done, reconfigure lyx. >> >> Kornel > > > > > -- > John Kane > Kingston ON Canada > -- John Kane Kingston ON Canada
Re: Missing Rnw(knitr) module
Am Mittwoch, 23. August 2017 um 06:30:37, schrieb John Kane > INFO: +checking for "rsvg-convert"... no > INFO: +checking for "inkscape"... no for "rsvg-convert" try # sudo apt-get install librsvg2-bin and for "inkscape" # sudo apt-get install inkscape When done, reconfigure lyx. Kornel signature.asc Description: This is a digitally signed message part.
Re: Missing Rnw(knitr) module
I'd be happy to do. Please see attached file. Thanks On 22 August 2017 at 21:32, Scott Kostyshak wrote: > On Tue, Aug 22, 2017 at 03:56:24PM -0400, John Kane wrote: > > Just as a minor follow-up the knitr.module is in usr/share/lux/layouts. > So > > I have knitr installed in R and the knitr.module in LyX. > > > > Presumably I'm missing something obvious but what? > > Can you send your configure log? That's always useful for issues like > these. > > Scott > -- John Kane Kingston ON Canada INFO: checking for a Latex2e program... INFO: +checking for "latex"... yes INFO: checking for a DVI postprocessing program... INFO: +checking for "pplatex"... no INFO: checking for pLaTeX, the Japanese LaTeX... INFO: +checking for "platex"... yes DEBUG: Add to RC: \converter platex dvi "platex" "latex=platex" DEBUG: Add to RC: \converter latex dvi"latex" "latex" INFO: checking for a java interpreter... INFO: +checking for "java"... yes INFO: checking for a perl interpreter... INFO: +checking for "perl"... yes INFO: checking for a Tgif viewer and editor... INFO: +checking for "tgif"... no DEBUG: Add to RC: \Format tgif "obj, tgo" Tgif "" "auto" "auto" "vector" "application/x-tgif" INFO: checking for a FIG viewer and editor... INFO: +checking for "xfig"... no INFO: +checking for "jfig3-itext.jar"... no INFO: +checking for "jfig3.jar"... no DEBUG: Add to RC: \Format figfig FIG"" "auto" "auto" "vector" "application/x-xfig" INFO: checking for a Dia viewer and editor... INFO: +checking for "dia"... no DEBUG: Add to RC: \Format diadia DIA"" "auto" "auto" "vector,zipped=native", "application/x-dia-diagram" INFO: checking for an OpenDocument drawing viewer and editor... INFO: +checking for "libreoffice"... yes DEBUG: Add to RC: \Format odg"odg, sxd" "OpenDocument drawing" "" "libreoffice" "libreoffice" "vector,zipped=native" "application/vnd.oasis.opendocument.graphics" DEBUG: Add to RC: \editor_alternatives odg "libreoffice" \viewer_alternatives odg "libreoffice" INFO: +checking for "lodraw"... yes DEBUG: Add to RC: \editor_alternatives odg "lodraw" \viewer_alternatives odg "lodraw" INFO: +checking for "ooffice"... no INFO: +checking for "oodraw"... no INFO: +checking for "soffice"... yes DEBUG: Add to RC: \editor_alternatives odg "soffice" \viewer_alternatives odg "soffice" INFO: checking for a Grace viewer and editor... INFO: +checking for "xmgrace"... no DEBUG: Add to RC: \Format agragr Grace "" "auto" "auto" "vector" "" INFO: checking for a FEN viewer and editor... INFO: +checking for "xboard"... no DEBUG: Add to RC: \Format fenfen FEN"" "auto" "auto" "" "" INFO: checking for a SVG viewer and editor... INFO: +checking for "inkscape"... no DEBUG: Add to RC: \Format svg"svg" SVG"" "auto" "auto" "vector" "image/svg+xml" \Format svgz "svgz" "SVG (compressed)" "" "auto" "auto" "vector,zipped=native" "" INFO: checking for a raster image viewer... INFO: +checking for "xv"... no INFO: +checking for "kview"... no INFO: +checking for "gimp-remote"... no INFO: +checking for "gimp"... no INFO: checking for a raster image editor... INFO: +checking for "gimp-remote"... no INFO: +checking for "gimp"... no DEBUG: Add to RC: \Format bmpbmp BMP"" "auto" "auto" "" "image/x-bmp" \Format gifgif GIF"" "auto" "auto" "" "image/gif" \Format jpg "jpg, jpeg" JPEG"" "auto" "auto" "" "image/jpeg" \Format pbmpbm PBM"" "auto" "auto" "" "image/x-portable-bitmap" \Format pgmpgm PGM"" "auto" "auto" "" "image/x-portable-graymap" \Format pngpng PNG"" "auto" "auto" "" "image/x-png" \Format ppmppm PPM"" "auto" "auto" "" "image/x-portable-pixmap" \Format tiff tif TIFF "" "auto" "auto" "" "image/tiff" \Format xbmxbm XBM"" "auto" "auto" "" "image/x-xbitmap" \Format xpmxpm XPM"" "auto" "auto" "" "image/x-xpixmap" INFO: checking for a text editor... INFO: +checking for "xemacs"... no INFO: +checking for "gvim"... no INFO: +checking for "kedit"... no INFO: +checking for "kwrite"... no INFO: +checking for "kate"... no INFO: +checking for "nedit"... no INFO: +checking for "gedit"... yes DEBUG: Add to RC: \Format asciichess asc"Plain text (chess output)" "" "" "gedit" "" "" \Format asciiimage asc"Plain text (image)" "" "" "gedit" "" "" \Format asciixfig asc"Plain text (Xfig output)" "" "" "gedit" "" "" \Format dateouttmp"date (output)" "" "" "gedit" "" "" \Format docbooksgmlDocBookB "" "gedit" "document,menu=export" "" \Format docbook-xml x
Re: Grammar checking
Hi Steve, I have never found a grammar checker that it useful for one's native language, in my case English. On the other hand, my French is rather primitive and a good grammar makes me intelligible if not exactly eloquent. I did try the MS one years ago and it was maddening. It seemed to want one to write at a grade 8 level and complained incessantly when I used a passive sentence. On 22 August 2017 at 17:38, Steve Litt wrote: > On Tue, 22 Aug 2017 15:35:38 +0200 > "Patrick Dupre" wrote: > > > Hello, > > > > lyx offers a language checker, but not a grammar checker. > > I installed the check-Tex option, but the results are not convincing > > (at least in English). The suggestion are really poor. > > Is there any way to install a more efficient grammar checker? > > To circumvent the problem, I used to generate a rtf file and then to > > use freeoffice which let me use a grammar checker like LT. > > However, the generation of the rtf file is really problematic for a > > scientific document (for example, I have to remove the section, > > subsection, etc..). > > > > Some suggestions? > > Last century I tried MSWord's grammar checker. I found it a great idea > impossible to implement. It would often let fly sentences with a wrong > word, and worse yet, it would flag lots of sentences that any author > would feel good about writing. > > I think that, once you get past absolutely horrible grammar, grammar > checking becomes nothing but frustration. > > I mentioned MSWord, which is obviously bad software, but I really think > it's impossible to implement a useful grammar checker with the current > state of AI. Wait another 10 years and perhaps grammar checkers will > learn how we authors talk, and base checking on that. > > SteveT > -- John Kane Kingston ON Canada
Re: Beta version 2.3.0 or 2.4.0?
Am Mittwoch, 23. August 2017 um 11:42:08, schrieb Kornel Benko > Am Mittwoch, 23. August 2017 um 11:22:51, schrieb Helge Hafting > > > I did a "git clone g...@git.lyx.org:lyx lyx23" in order to do translation > > work (and test in general). > > > > This compiled & ran with no issues, but Help->About says LyX version > > 2.4.0dev instead of 2.3 > > > > Did I get the wrong version for translation work - or is it supposed to > > say 2.4.0? > > > > Do I need some git command to switch to the 'right' development repository? > > > > Helge Hafting > > You compiled master branch. Change to 2.3.x branch. > In the source tree use I mean in the cloned source tree > # git checkout 2.3.x > Kornel signature.asc Description: This is a digitally signed message part.
Re: Beta version 2.3.0 or 2.4.0?
Am Mittwoch, 23. August 2017 um 11:22:51, schrieb Helge Hafting > I did a "git clone g...@git.lyx.org:lyx lyx23" in order to do translation > work (and test in general). > > This compiled & ran with no issues, but Help->About says LyX version > 2.4.0dev instead of 2.3 > > Did I get the wrong version for translation work - or is it supposed to > say 2.4.0? > > Do I need some git command to switch to the 'right' development repository? > > Helge Hafting You compiled master branch. Change to 2.3.x branch. In the source tree use # git checkout 2.3.x Kornel signature.asc Description: This is a digitally signed message part.
Beta version 2.3.0 or 2.4.0?
I did a "git clone g...@git.lyx.org:lyx lyx23" in order to do translation work (and test in general). This compiled & ran with no issues, but Help->About says LyX version 2.4.0dev instead of 2.3 Did I get the wrong version for translation work - or is it supposed to say 2.4.0? Do I need some git command to switch to the 'right' development repository? Helge Hafting
