{\a{a}} in bibtex

Hi all, A latex problem I suspect, but I'm not sure what I'm doing wrong. I want to use {\a{a}} in an author name in bibtex, however, when I view the postscript file, I get an error about the character not being available in the T1 encoding. It appears that lyx uses the T1 encoding as a

Two points on a letter.

Hi,  Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex.  Joeri

Re: Grr... Is this _Real_?? Solution - Re: Old pkg. no good-changes...

"Kenward" == Kenward Vaughan [EMAIL PROTECTED] writes: Kenward Well, I finally weaseled out the answer to my problem. It has Kenward nothing to do with _anything_ Except the following difference Kenward between working/non-working files: [...] Kenward Is this "for real??" One space Outside of

Re: lyx, natbib and alternate \cite commands

"Joshua" == Joshua Rigler [EMAIL PROTECTED] writes: Joshua I submit this message with full knowledge that this has been Joshua discussed extensively in the past. I'm just curious why, with Joshua such a major change to the citation dialog in LyX 1.1.6, Joshua nothing was added to take advantage

Re: {\a{a}} in bibtex

"Rod" == Rod Pinna [EMAIL PROTECTED] writes: Rod Hi all, A latex problem I suspect, but I'm not sure what I'm Rod doing wrong. I want to use {\a{a}} in an author name in bibtex, Rod however, when I view the postscript file, I get an error about Rod the character not being available in the T1

Re: Saving options and mathcursor in 1.1.6

1. If I change something using the Preferences pop-up, the prefrences file gets overwritten, and only the just-made changes appear in it. The previous customizations are lost. Is this the intended behavior? Am I using the pop-up wrong? A! A bug brought about by lack of

Re: Two points on a letter, found list, but I get errors.

Hi, Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex. I have now the rigth symbol list for this problem, but when I insert the LaTex code and to view DVI it gives errors. The first (of the 18 errors) is Missing $ inserted

Re: lyx crash

Hello, Sorry, I can't reproduce the bug. Yann COLLETTE Mailing-List: contact [EMAIL PROTECTED]; run by ezmlm X-No-Archive: yes List-Post: mailto:[EMAIL PROTECTED] List-Help: mailto:[EMAIL PROTECTED] List-Unsubscribe: mailto:[EMAIL PROTECTED] Delivered-To: mailing list [EMAIL PROTECTED]

Re: lyx, natbib and alternate \cite commands

Yes, a little. I have preliminary natbib support working in my tree. I'd just like to sort out how LyX stores options to LaTeX commands before releasing this to the general public. Natbib can have up to two options in a \cite field; comments before and after the citation. LyX can currently

Re: Two points on a letter.

On Wed, Jan 17, 2001 at 11:32:57PM +0100, Joeri Verbiest wrote: Hi, Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex. You can enter these letters by pressing, M-m " and then pressing letter you want (there also other methods).

Re: WYSIWYM

Andre Berger schrieb: Straight to the point: I'm very disappointed. Not even M$ dared to introduce I doubt that this might be a helpful comparision, thinking in this terms might also direct into a wrong direction ! There a so many differences between MS and the Lyx- project that

Re: WYSIWYM

On 18 Jan 2001, Lars Gullik Bjnnes wrote: Why do you think that the change from 1.1.5 to 1.1.6 was a change in minor versions? It certanly is not. Ok, I'm now better informed. But I do think that the LyX version numbers are confusing. My suggestions: - drop those a.b.cfixd

Re: WYSIWYM

Tuukka Toivonen [EMAIL PROTECTED] writes: | On 18 Jan 2001, Lars Gullik Bjnnes wrote: | | Why do you think that the change from 1.1.5 to 1.1.6 was a change in | minor versions? | | It certanly is not. | | Ok, I'm now better informed. But I do think that the LyX version numbers | are

arabic support on lyx 1.1.6

hi everybody, I have used arabic support in lyx1.1.5, (redhat 6.0 ) whithout big problem. I only copied (thank you dekel ) the lyxrc.example to my lyx Home and changing the corresponding lines to the arabic support. (I used arabtex ) Now, with Lyx 1.1.6, I try do the same thing but the program

A couple of small points in lyxrc.example (lyx 1.1.6)

When reconciling my current lyxrc with the latest lyxrc.example, I found the following stylistic inconsistencies (i.e. small things, but nice to fix): 1. Some commented out commands have "# " before them (e.g. \serverpipe), but most just "#". Something like s/# \\/#\\/ is what you need to fix

Re: A couple of small points in lyxrc.example (lyx 1.1.6)

Reuben, I think that it's fair to say that use of lyxrc is deprecated and support for it will probably be removed eventually. The idea is to use the GUI Preferences popup instead, the output of which is saved to a new file "preferences". Moreover (some of) the entries of lyxrc.example may

Re: lyx crash

Hello, Infortunatly, I can't reproduce the bug. Yann COLLETTE Mailing-List: contact [EMAIL PROTECTED]; run by ezmlm X-No-Archive: yes List-Post: mailto:[EMAIL PROTECTED] List-Help: mailto:[EMAIL PROTECTED] List-Unsubscribe: mailto:[EMAIL PROTECTED] Delivered-To: mailing list [EMAIL

Re: WYSIWYM

thomas schnhoff [EMAIL PROTECTED] writes: Andre Berger schrieb: Straight to the point: I'm very disappointed. Not even M$ dared to introduce I doubt that this might be a helpful comparision, thinking in this terms might also direct into a wrong direction ! There a so many

Re: lyx crash

"Yann" == Yann Collete [EMAIL PROTECTED] writes: Yann Hello, Infortunatly, I can't reproduce the bug. Just tell us if it appears again... JMarc

Re: WYSIWYM

Am Thu, 18.Jan.2001 um 11:29:18 +0100 schrieb Jean-Marc Lasgouttes: Unfortunately, changing format only for major releases is only possible if you have a development team strong enough to be able to have both a stable and development branch (think Linux kernel). We It seems to me that, in a

$LANG specific menus not possible in 1.1.6

I do know that this mail should be better placed into the lyx-devel group! But I haven't subscribed there now and I hope to get in contact with some develepers through this list, too! = I am just working on the port pf 1.1.6 to Win32 (A lot

partial pdf export in 1.1.6

Hello everyone, I have the need to pull out chapters of a book seperately and make pdf versions of them. In 1.1.5 I can do this by: exporting to PS and then using the dialogue box to print out a range of pages, name the file "ChapterX.ps" and then use to ps2pdf to convert it. Worked great.

Re: A couple of small points in lyxrc.example (lyx 1.1.6)

On Thursday 18 January 2001 14:31, Reuben Thomas wrote: I think that it's fair to say that use of lyxrc is deprecated and support for it will probably be removed eventually. The idea is to use the GUI Preferences popup instead, the output of which is saved to a new file "preferences".

LaTeX-errors in 1.1.6

Hi All! strange behaviour found ;-) when processing a file with loads of latex in it and some error in it (couldn't verify which ones do it, forgotten braces, eg), lyx doesn't seem to get the errormessage back (or doesn't handle it right), but simply updates dvi or ps with the last version

Re: pstex image problem

"Yann" == Yann Collete [EMAIL PROTECTED] writes: Yann Then I try view postscript and, it doesn't work. After some Yann tries, I found it was due to the .pstex_t.tex file. I store my Yann figures in a "Images/" directory so, in my .pstex_t.tex, the Yann reference to the pstex file is stored like

Re: compatibility 11.5fix2 and 1.1.6

"thomas" == thomas schönhoff [EMAIL PROTECTED] writes: thomas Hi, I started thinking about installint Lyx on my NT 4.0 thomas maschine at wrk. At home I have already installed Lyx-1.1.6 on thomas my RH 7.0 maschine. Recently I noticed that Lyx-1.1.5fix2 is thomas available for windows whilst

Re: WYSIWYM

On Thu, 18 Jan 2001, thomas schnhoff wrote: by the way is there a possibility to convert 11.5 files to LaTex and re-import them to 1.1.6 (althought this might be a bit uneasy in case of included graphics, isn't it?) There is no need to explicitly convert 1.1.5 files to 1.1.6 ! LyX

Re: $LANG specific menus not possible in 1.1.6

Claus === 1) One problem is that although I have set LANG=de_DE the Claus german menus will not open! BUT: Passing -dbg 32 shows that Claus de_menus.bind will be loaded. So I am working with default Claus english menus but have to use the german shortcuts!?!?! What Claus has been changed in

arabic support on ly1.16

hi everybody, I have used arabic support in lyx1.1.5, (redhat 6.0 ) whithout big problem. I only copied (thank you dekel ) the lyxrc.example to my lyx Home and changing the corresponding lines to the arabic support. (I used arabtex ) Now, with Lyx 1.1.6, I try do the same thing but the program

Re: $LANG specific menus not possible in 1.1.6

"Claus" == Claus Hentschel [EMAIL PROTECTED] writes: Claus At the moment the following does happen: - the mo files are Claus located in ...lyx/lib/locale/xx/lyx.mo - gdb shows that lyx Claus uses ...lyx/share/locale as its LOCALEDIR by default (so it Claus can't find the files!) - doing ln -s

Re: pstex image problem

A better way to handle XFig files .fig's is to use the External Inset, In this inset you add the .fig file and it will add the tex and image automatically, if it doesn't then it's a single script change to make it work. Hope this helps. On Thu, 18 Jan 2001, Yann Collete wrote: Hello, I've

algorithms, article(AMS), 1.1.5fix1

I am just learning lyx for the first time on a paper. I need to write an algorithm, with indented lines, properly lined up. I have found three things in the documentation that looked like possibilities, but none has worked, so far. The Lyx-code enviroment sounds good in the documentation,

Re: partial pdf export in 1.1.6

On Thu, Jan 18, 2001 at 09:40:33AM -0500, Roy Cutler wrote: Hello everyone, I have the need to pull out chapters of a book seperately and make pdf versions of them. In 1.1.5 I can do this by: exporting to PS and then using the dialogue box to print out a range of pages, name the file

Re: 1.1.6-pre3 and wv

On Thu, Jan 18, 2001 at 07:22:23PM +0200, Robin Turner wrote: I installed from RPMs. If I compile wv from source, Lyx doesn't detect it. In order to autodetect the wvCleanLatex program, it must be in your path. Did you did a make install after compiling it ? You can also add a Word-Latex

Re: $LANG specific menus not possible in 1.1.6

Claus At the moment the following does happen: - the mo files are Claus located in ...lyx/lib/locale/xx/lyx.mo - gdb shows that lyx Claus uses ...lyx/share/locale as its LOCALEDIR by default (so it Claus can't find the files!) - doing ln -s form lib/locale to Claus share/locale and starting

Lyx 1.1.4 fix3

Hallo, these days I installed SuSE Linux 7 Personal Edition. This bundle contained also a LyX Version 1.1.4 fix 3. After I had installed the program I begun to test as I am facinated of the features. After I've started the program I saw later on the console the following message: Achtung:

Lyx-1.1.6 and Included files

Hello, I've seen the following problem in lyx-1.1.6: when I include a lyx file into another lyx file, the latex compilation fails because the translation is: \Include{the_subfile} instead of: \include{the_subfile} Of course putting \def\Include#1{\include{#1}} in the pramble makes it work,

Re: {\a{a}} in bibtex

Thanks for the suggestion, however, I now get the message that it isn't available in OT1 encoding. Perhaphs I have the wrong code? I'm after an a with a little circle above it. Pardon my ignorance for not knowing the name BTW. I've tried this both with and without the times.sty package, and got

Re: {\a{a}} in bibtex

Hello all, Mea Culpa. Well, sort of. The format of {\a{a}} doesn't work. Oddly, it works for {\"{u}} though. Not sure where I picked it up. Changing it to {\aa} provided the solution, which now quite happily uses T1 encoding. Sorry 'bout that, Rod On Fri, 19 Jan 2001, Rod Pinna wrote:

Re: two definitions in a row, article(AMS), 1.1.5fix1

Rodney Bates wrote: I am just learning lyx for the first time on a paper. I want two (sometimes more) Definitions in a row. The definition environment puts all contiguous definition paragraphs under one occurrence of the label "definition", with one definition number. I guess this

Re: algorithms, article(AMS), 1.1.5fix1

Rodney Bates wrote: I am just learning lyx for the first time on a paper. I need to write an algorithm, with indented lines, properly lined up. I have found three things in the documentation that looked like possibilities, but none has worked, so far. The Lyx-code enviroment sounds

LyX 1.1.6. does not launch on OSF

Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the

{\a{a}} in bibtex

Hi all, A latex problem I suspect, but I'm not sure what I'm doing wrong. I want to use {\a{a}} in an author name in bibtex, however, when I view the postscript file, I get an error about the character not being available in the T1 encoding. It appears that lyx uses the T1 encoding as a

Two points on a letter.

Hi,  Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex.  Joeri

Re: Grr... Is this _Real_?? Solution - Re: Old pkg. no good-changes...

"Kenward" == Kenward Vaughan [EMAIL PROTECTED] writes: Kenward Well, I finally weaseled out the answer to my problem. It has Kenward nothing to do with _anything_ Except the following difference Kenward between working/non-working files: [...] Kenward Is this "for real??" One space Outside of

Re: lyx, natbib and alternate \cite commands

"Joshua" == Joshua Rigler [EMAIL PROTECTED] writes: Joshua I submit this message with full knowledge that this has been Joshua discussed extensively in the past. I'm just curious why, with Joshua such a major change to the citation dialog in LyX 1.1.6, Joshua nothing was added to take advantage

Re: {\a{a}} in bibtex

"Rod" == Rod Pinna [EMAIL PROTECTED] writes: Rod Hi all, A latex problem I suspect, but I'm not sure what I'm Rod doing wrong. I want to use {\a{a}} in an author name in bibtex, Rod however, when I view the postscript file, I get an error about Rod the character not being available in the T1

Re: Saving options and mathcursor in 1.1.6

1. If I change something using the Preferences pop-up, the prefrences file gets overwritten, and only the just-made changes appear in it. The previous customizations are lost. Is this the intended behavior? Am I using the pop-up wrong? A! A bug brought about by lack of

Re: Two points on a letter, found list, but I get errors.

Hi, Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex. I have now the rigth symbol list for this problem, but when I insert the LaTex code and to view DVI it gives errors. The first (of the 18 errors) is Missing $ inserted

Re: lyx crash

Hello, Sorry, I can't reproduce the bug. Yann COLLETTE Mailing-List: contact [EMAIL PROTECTED]; run by ezmlm X-No-Archive: yes List-Post: mailto:[EMAIL PROTECTED] List-Help: mailto:[EMAIL PROTECTED] List-Unsubscribe: mailto:[EMAIL PROTECTED] Delivered-To: mailing list [EMAIL PROTECTED]

Re: lyx, natbib and alternate \cite commands

Yes, a little. I have preliminary natbib support working in my tree. I'd just like to sort out how LyX stores options to LaTeX commands before releasing this to the general public. Natbib can have up to two options in a \cite field; comments before and after the citation. LyX can currently

Re: Two points on a letter.

On Wed, Jan 17, 2001 at 11:32:57PM +0100, Joeri Verbiest wrote: Hi, Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex. You can enter these letters by pressing, M-m " and then pressing letter you want (there also other methods).

Re: WYSIWYM

Andre Berger schrieb: Straight to the point: I'm very disappointed. Not even M$ dared to introduce I doubt that this might be a helpful comparision, thinking in this terms might also direct into a wrong direction ! There a so many differences between MS and the Lyx- project that

Re: WYSIWYM

On 18 Jan 2001, Lars Gullik Bjnnes wrote: Why do you think that the change from 1.1.5 to 1.1.6 was a change in minor versions? It certanly is not. Ok, I'm now better informed. But I do think that the LyX version numbers are confusing. My suggestions: - drop those a.b.cfixd

Re: WYSIWYM

Tuukka Toivonen [EMAIL PROTECTED] writes: | On 18 Jan 2001, Lars Gullik Bjnnes wrote: | | Why do you think that the change from 1.1.5 to 1.1.6 was a change in | minor versions? | | It certanly is not. | | Ok, I'm now better informed. But I do think that the LyX version numbers | are

arabic support on lyx 1.1.6

hi everybody, I have used arabic support in lyx1.1.5, (redhat 6.0 ) whithout big problem. I only copied (thank you dekel ) the lyxrc.example to my lyx Home and changing the corresponding lines to the arabic support. (I used arabtex ) Now, with Lyx 1.1.6, I try do the same thing but the program

A couple of small points in lyxrc.example (lyx 1.1.6)

When reconciling my current lyxrc with the latest lyxrc.example, I found the following stylistic inconsistencies (i.e. small things, but nice to fix): 1. Some commented out commands have "# " before them (e.g. \serverpipe), but most just "#". Something like s/# \\/#\\/ is what you need to fix

Re: A couple of small points in lyxrc.example (lyx 1.1.6)

Reuben, I think that it's fair to say that use of lyxrc is deprecated and support for it will probably be removed eventually. The idea is to use the GUI Preferences popup instead, the output of which is saved to a new file "preferences". Moreover (some of) the entries of lyxrc.example may

Re: lyx crash

Hello, Infortunatly, I can't reproduce the bug. Yann COLLETTE Mailing-List: contact [EMAIL PROTECTED]; run by ezmlm X-No-Archive: yes List-Post: mailto:[EMAIL PROTECTED] List-Help: mailto:[EMAIL PROTECTED] List-Unsubscribe: mailto:[EMAIL PROTECTED] Delivered-To: mailing list [EMAIL

Re: WYSIWYM

thomas schnhoff [EMAIL PROTECTED] writes: Andre Berger schrieb: Straight to the point: I'm very disappointed. Not even M$ dared to introduce I doubt that this might be a helpful comparision, thinking in this terms might also direct into a wrong direction ! There a so many

Re: lyx crash

"Yann" == Yann Collete [EMAIL PROTECTED] writes: Yann Hello, Infortunatly, I can't reproduce the bug. Just tell us if it appears again... JMarc

Re: WYSIWYM

Am Thu, 18.Jan.2001 um 11:29:18 +0100 schrieb Jean-Marc Lasgouttes: Unfortunately, changing format only for major releases is only possible if you have a development team strong enough to be able to have both a stable and development branch (think Linux kernel). We It seems to me that, in a

$LANG specific menus not possible in 1.1.6

I do know that this mail should be better placed into the lyx-devel group! But I haven't subscribed there now and I hope to get in contact with some develepers through this list, too! = I am just working on the port pf 1.1.6 to Win32 (A lot

partial pdf export in 1.1.6

Hello everyone, I have the need to pull out chapters of a book seperately and make pdf versions of them. In 1.1.5 I can do this by: exporting to PS and then using the dialogue box to print out a range of pages, name the file "ChapterX.ps" and then use to ps2pdf to convert it. Worked great.

Re: A couple of small points in lyxrc.example (lyx 1.1.6)

On Thursday 18 January 2001 14:31, Reuben Thomas wrote: I think that it's fair to say that use of lyxrc is deprecated and support for it will probably be removed eventually. The idea is to use the GUI Preferences popup instead, the output of which is saved to a new file "preferences".

LaTeX-errors in 1.1.6

Hi All! strange behaviour found ;-) when processing a file with loads of latex in it and some error in it (couldn't verify which ones do it, forgotten braces, eg), lyx doesn't seem to get the errormessage back (or doesn't handle it right), but simply updates dvi or ps with the last version

Re: pstex image problem

"Yann" == Yann Collete [EMAIL PROTECTED] writes: Yann Then I try view postscript and, it doesn't work. After some Yann tries, I found it was due to the .pstex_t.tex file. I store my Yann figures in a "Images/" directory so, in my .pstex_t.tex, the Yann reference to the pstex file is stored like

Re: compatibility 11.5fix2 and 1.1.6

"thomas" == thomas schönhoff [EMAIL PROTECTED] writes: thomas Hi, I started thinking about installint Lyx on my NT 4.0 thomas maschine at wrk. At home I have already installed Lyx-1.1.6 on thomas my RH 7.0 maschine. Recently I noticed that Lyx-1.1.5fix2 is thomas available for windows whilst

Re: WYSIWYM

On Thu, 18 Jan 2001, thomas schnhoff wrote: by the way is there a possibility to convert 11.5 files to LaTex and re-import them to 1.1.6 (althought this might be a bit uneasy in case of included graphics, isn't it?) There is no need to explicitly convert 1.1.5 files to 1.1.6 ! LyX

Re: $LANG specific menus not possible in 1.1.6

Claus === 1) One problem is that although I have set LANG=de_DE the Claus german menus will not open! BUT: Passing -dbg 32 shows that Claus de_menus.bind will be loaded. So I am working with default Claus english menus but have to use the german shortcuts!?!?! What Claus has been changed in

arabic support on ly1.16

hi everybody, I have used arabic support in lyx1.1.5, (redhat 6.0 ) whithout big problem. I only copied (thank you dekel ) the lyxrc.example to my lyx Home and changing the corresponding lines to the arabic support. (I used arabtex ) Now, with Lyx 1.1.6, I try do the same thing but the program

Re: $LANG specific menus not possible in 1.1.6

"Claus" == Claus Hentschel [EMAIL PROTECTED] writes: Claus At the moment the following does happen: - the mo files are Claus located in ...lyx/lib/locale/xx/lyx.mo - gdb shows that lyx Claus uses ...lyx/share/locale as its LOCALEDIR by default (so it Claus can't find the files!) - doing ln -s

Re: pstex image problem

A better way to handle XFig files .fig's is to use the External Inset, In this inset you add the .fig file and it will add the tex and image automatically, if it doesn't then it's a single script change to make it work. Hope this helps. On Thu, 18 Jan 2001, Yann Collete wrote: Hello, I've

algorithms, article(AMS), 1.1.5fix1

I am just learning lyx for the first time on a paper. I need to write an algorithm, with indented lines, properly lined up. I have found three things in the documentation that looked like possibilities, but none has worked, so far. The Lyx-code enviroment sounds good in the documentation,

Re: partial pdf export in 1.1.6

On Thu, Jan 18, 2001 at 09:40:33AM -0500, Roy Cutler wrote: Hello everyone, I have the need to pull out chapters of a book seperately and make pdf versions of them. In 1.1.5 I can do this by: exporting to PS and then using the dialogue box to print out a range of pages, name the file

Re: 1.1.6-pre3 and wv

On Thu, Jan 18, 2001 at 07:22:23PM +0200, Robin Turner wrote: I installed from RPMs. If I compile wv from source, Lyx doesn't detect it. In order to autodetect the wvCleanLatex program, it must be in your path. Did you did a make install after compiling it ? You can also add a Word-Latex

Re: $LANG specific menus not possible in 1.1.6

Claus At the moment the following does happen: - the mo files are Claus located in ...lyx/lib/locale/xx/lyx.mo - gdb shows that lyx Claus uses ...lyx/share/locale as its LOCALEDIR by default (so it Claus can't find the files!) - doing ln -s form lib/locale to Claus share/locale and starting

Lyx 1.1.4 fix3

Hallo, these days I installed SuSE Linux 7 Personal Edition. This bundle contained also a LyX Version 1.1.4 fix 3. After I had installed the program I begun to test as I am facinated of the features. After I've started the program I saw later on the console the following message: Achtung:

Lyx-1.1.6 and Included files

Hello, I've seen the following problem in lyx-1.1.6: when I include a lyx file into another lyx file, the latex compilation fails because the translation is: \Include{the_subfile} instead of: \include{the_subfile} Of course putting \def\Include#1{\include{#1}} in the pramble makes it work,

Re: {\a{a}} in bibtex

Thanks for the suggestion, however, I now get the message that it isn't available in OT1 encoding. Perhaphs I have the wrong code? I'm after an a with a little circle above it. Pardon my ignorance for not knowing the name BTW. I've tried this both with and without the times.sty package, and got

Re: {\a{a}} in bibtex

Hello all, Mea Culpa. Well, sort of. The format of {\a{a}} doesn't work. Oddly, it works for {\"{u}} though. Not sure where I picked it up. Changing it to {\aa} provided the solution, which now quite happily uses T1 encoding. Sorry 'bout that, Rod On Fri, 19 Jan 2001, Rod Pinna wrote:

Re: two definitions in a row, article(AMS), 1.1.5fix1

Rodney Bates wrote: I am just learning lyx for the first time on a paper. I want two (sometimes more) Definitions in a row. The definition environment puts all contiguous definition paragraphs under one occurrence of the label "definition", with one definition number. I guess this

Re: algorithms, article(AMS), 1.1.5fix1

Rodney Bates wrote: I am just learning lyx for the first time on a paper. I need to write an algorithm, with indented lines, properly lined up. I have found three things in the documentation that looked like possibilities, but none has worked, so far. The Lyx-code enviroment sounds

LyX 1.1.6. does not launch on OSF

Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the

{\a{a}} in bibtex

Hi all, A latex problem I suspect, but I'm not sure what I'm doing wrong. I want to use {\a{a}} in an author name in bibtex, however, when I view the postscript file, I get an error about the character not being available in the T1 encoding. It appears that lyx uses the T1 encoding as a

Two points on a letter.

Hi,  Some german letters have two points on it, how can I to this in Lyx. I can't find it in the symbol list of LaTex.  Joeri

Re: Grr... Is this _Real_?? Solution <-> Re: Old pkg. no good-changes...

> "Kenward" == Kenward Vaughan <[EMAIL PROTECTED]> writes: Kenward> Well, I finally weaseled out the answer to my problem. It has Kenward> nothing to do with _anything_ Except the following difference Kenward> between working/non-working files: [...] Kenward> Is this "for real??" One space

Re: lyx, natbib and alternate \cite commands

> "Joshua" == Joshua Rigler <[EMAIL PROTECTED]> writes: Joshua> I submit this message with full knowledge that this has been Joshua> discussed extensively in the past. I'm just curious why, with Joshua> such a major change to the citation dialog in LyX 1.1.6, Joshua> nothing was added to

Re: {\a{a}} in bibtex

> "Rod" == Rod Pinna <[EMAIL PROTECTED]> writes: Rod> Hi all, A latex problem I suspect, but I'm not sure what I'm Rod> doing wrong. I want to use {\a{a}} in an author name in bibtex, Rod> however, when I view the postscript file, I get an error about Rod> the character not being available

Re: Saving options and mathcursor in 1.1.6

> 1. If I change something using the Preferences pop-up, the prefrences file gets > overwritten, and only the just-made changes appear in it. The previous > customizations are lost. Is this the intended behavior? Am I using the pop-up > wrong? A! A bug brought about by lack of

Re: Two points on a letter, found list, but I get errors.

Hi, > Some german letters have two points on it, how can I to this in Lyx. I > can't find it in the symbol list of LaTex. I have now the rigth symbol list for this problem, but when I insert the LaTex code and to view DVI it gives errors. The first (of the 18 errors) is Missing $ inserted

Re: lyx crash

Hello, Sorry, I can't reproduce the bug. Yann COLLETTE > Mailing-List: contact [EMAIL PROTECTED]; run by ezmlm > X-No-Archive: yes > List-Post: > List-Help: > List-Unsubscribe: > Delivered-To: mailing list [EMAIL

Re: lyx, natbib and alternate \cite commands

Yes, a little. I have preliminary natbib support working in my tree. I'd just like to sort out how LyX stores options to LaTeX commands before releasing this to the general public. Natbib can have up to two options in a \cite field; comments before and after the citation. LyX can currently

Re: Two points on a letter.

On Wed, Jan 17, 2001 at 11:32:57PM +0100, Joeri Verbiest wrote: > Hi, > > Some german letters have two points on it, how can I to this in Lyx. I > can't find it in the symbol list of LaTex. You can enter these letters by pressing, M-m " and then pressing letter you want (there also other

Re: WYSIWYM

Andre Berger schrieb: > Straight to the point: I'm very disappointed. Not even M$ dared to > introduce I doubt that this might be a helpful comparision, thinking in this terms might also direct into a wrong direction ! There a so many differences between MS and the Lyx- project

Re: WYSIWYM

On 18 Jan 2001, Lars Gullik Bjønnes wrote: > Why do you think that the change from 1.1.5 to 1.1.6 was a change in > minor versions? > > It certanly is not. Ok, I'm now better informed. But I do think that the LyX version numbers are confusing. My suggestions: - drop those a.b.cfixd

Re: WYSIWYM

Tuukka Toivonen <[EMAIL PROTECTED]> writes: | On 18 Jan 2001, Lars Gullik Bjønnes wrote: | | > Why do you think that the change from 1.1.5 to 1.1.6 was a change in | > minor versions? | > | > It certanly is not. | | Ok, I'm now better informed. But I do think that the LyX version numbers |

arabic support on lyx 1.1.6

hi everybody, I have used arabic support in lyx1.1.5, (redhat 6.0 ) whithout big problem. I only copied (thank you dekel ) the lyxrc.example to my lyx Home and changing the corresponding lines to the arabic support. (I used arabtex ) Now, with Lyx 1.1.6, I try do the same thing but the program

A couple of small points in lyxrc.example (lyx 1.1.6)

When reconciling my current lyxrc with the latest lyxrc.example, I found the following stylistic inconsistencies (i.e. small things, but nice to fix): 1. Some commented out commands have "# " before them (e.g. \serverpipe), but most just "#". Something like s/# \\/#\\/ is what you need to fix

Re: A couple of small points in lyxrc.example (lyx 1.1.6)

Reuben, I think that it's fair to say that use of lyxrc is deprecated and support for it will probably be removed eventually. The idea is to use the GUI Preferences popup instead, the output of which is saved to a new file "preferences". Moreover (some of) the entries of lyxrc.example may

  1   2   >