What is the bare minimum for a LyX installation if the only thing that should
be done is writing new LyX documents and producing pdf's?
LyX, LaTeX, ghostscript, what else? As I remember, the LyX installer installed
both Perl and Python. Will LyX work without them?
The reason for asking is that
Stephen Harris [EMAIL PROTECTED] writes:
Maybe that sounded complicated, but it takes less than
15 seconds to switch back and forth by renaming folders.
I don't know if it is this easy using Linux, but there should
be a way.
You need not renaming your folders. Call one folder LyX137 and the
http://wiki.lyx.org/LyX/LyXOnCygwin
Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
(replace x ^ to match your archive name)
I was reading over Enrico's detailed instructions.
I can't find a lyx 1.4.0.tar.bz2 or tar.gz for download.
The Pre5 doesn't have a configure file to execute
the
Sanders, Maarten (M.J.L. [EMAIL PROTECTED] writes:
Is there some way (e.g. in a .layout) to tell LyX to automatically
center the contents of a float environment (image and caption)?
Put the following in the preamble:
\renewenvironment{figure}[1][]{%
[EMAIL PROTECTED]
\centering
Stephen Harris [EMAIL PROTECTED] writes:
http://wiki.lyx.org/LyX/LyXOnCygwin
Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
(replace x ^ to match your archive name)
I was reading over Enrico's detailed instructions.
I can't find a lyx 1.4.0.tar.bz2 or tar.gz for download.
Well,
On Friday 17 February 2006 02:30, Tom Poe wrote:
Stephen: Well, futzed around, then decided to log out, set session to
KDE, and ran the command, 'yum xforms'. It worked magically! This was
my first experience with yum. I then ran the command 'yum install lyx'
and again, magic! I am now up
On Fri, 17 Feb 2006, Anders Ekberg wrote:
Thanks Christian,
I will try to upload the pictures and add additional material (you're
right, the example files could be good). I will also try to continue
with instruction on how to add templates, etc. Unfortunately I'm
locked up until the
Marcelo Acuña wrote:
I can't to use spellchecker. Accented letters
and ñ, Ñ are not recognized by ispell, aspell.
Common problem for unicode users, because
lyx doesn't support unicode. That cause trouble
when the spellchekcer expects unicode while lyx
gives it iso8859 encoded
Stacia Hartleben wrote:
Hi there! I was messing around after looking at this tutorial
(http://wiki.lyx.org/LyX/XY-pic) on how to get XY pic to work on LyX
and I got some limited tree support with xytree and TIPA working!
That's nice indeed. Even if I knew we have some provisional code for tipa
Dear Lyx users,
I am writing a document with the bibliography given as footnotes, thanks
to the footbib package. I would like to insert comments, usually given
as footnotes, as a part of the bibliography. In other words, is it
possible to number these comments within the numbering scheme of
Tom Poe wrote:
I checked for xforms download, and ran into problems trying to locate
the proper file. The Redhat link for rpm, for example, gave me an error
message that it couldn't change ftp directory. Does anyone know where I
can download Xforms files? Or, should I try to use QT, and
Juergen Spitzmueller wrote:
Concerning TIPA, I'm tempted to have a look in the next development cycle (for
1.5), but don't hold your breath. There are so many things to do, and even if
I'm a linguist myself, I don't need phonetic symbols frequently enough to get
annoyed by the lacking support
Herbert Voss wrote:
do you know the following packages?
Linguistic tree diagrams for Role and Reference Grammar (RRG)
http://www.ctan.org/tex-archive/macros/latex/contrib/rrgtrees
typesetting of trees that are common in linguistics
Helge Hafting wrote:
Showing the generated index is indeed possible, by
using the existing mechanism for showing rendered formulas. Well,
it takes a lot more time as you typically need to render the entire
document to get the page numbers. So index preview should
be optional.
Another
Juergen Spitzmueller wrote:
Herbert Voss wrote:
do you know the following packages?
Linguistic tree diagrams for Role and Reference Grammar (RRG)
http://www.ctan.org/tex-archive/macros/latex/contrib/rrgtrees
typesetting of trees that are common in linguistics
I'd be happy to make an info page on the lyx wiki, except would it
really be useful, now that 1.4 is going to get rid of the xymatrix
support? That makes me really sad :(
On 2/17/06, Juergen Spitzmueller [EMAIL PROTECTED] wrote:
Herbert Voss wrote:
do you know the following packages?
On Fri, 17 Feb 2006, Jack M. Lyon wrote:
Usually indexers don't care so much about seeing the actual page numbers,
but they do care about seeing the *structure* of the index as they work.
Which brings up another issue that might be a wrench in the gears:
different standards for indexes
Stacia Hartleben wrote:
I'd be happy to make an info page on the lyx wiki, except would it
really be useful, now that 1.4 is going to get rid of the xymatrix
support? That makes me really sad :(
at least the tipa part will be useful.
Jürgen
Herbert Voss wrote:
here are some examples with code
I see that your book grew quite a bit ;-)
Jürgen
Can anyone tell me if there is an up-to-date HOWTO somewhere for using
Lyx for DocBook output of software user's manuals?
Personally I am using python/manual.cls and an adapted layout file.
This works reasonably well but there is no chm output and other fancy
stuff.
I tried the lyx/docbook
Stacia, this is great--I thought the only way to do trees and IPA in
LyX was in ERT. I don't know how many linguists are on this list, but
what do people think of starting a wiki page LyX for Linguists,
similar to LaTeX for linguists?
http://www.essex.ac.uk/linguistics/clmt/latex4ling/
Jose' Matos wrote:
On Friday 17 February 2006 02:30, Tom Poe wrote:
Stephen: Well, futzed around, then decided to log out, set session to
KDE, and ran the command, 'yum xforms'. It worked magically! This was
my first experience with yum. I then ran the command 'yum install lyx'
and
I tried to get Covington (numbered examples) working but I can't seem
to do it using this same method. Everyone please vote on this bug at
bugzilla, or add comments: http://bugzilla.lyx.org/show_bug.cgi?id=325
It's obvious LyX can support this stuff, we just have to get it
implemented in a better
Can anyone tell me how to use oldstyle figures in my body text (i.e.,
text figures or the j version of the fonts)
and lining figures for my footnotes (the x version of the font)?
I prefer the appearance of osf, but in the footnotes I must use a more
scientific look.
(I've asked this
Hi all,
rumors are that LyX 1.4 is not going to support XY-Pic
anymore. I cannot believe that the developers are serious
about this. If they were, the reasons for me to use LyX
would be gone. To name these reasons specifically, they
are:
Instant-preview
XY-Pic
and, last but not least Uwe's
Dear All
I have a diagram which I can export as PNG, JPG, PDF or SVG. What
should I do so that the text of the diagram appears with the same font
of the main document? Is that possible?
Thanks in advance,
Paul
- Original Message -
From: Enrico Forestieri [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: Friday, February 17, 2006 2:20 AM
Subject: Re: LyX on Cygwin
Stephen Harris [EMAIL PROTECTED] writes:
http://wiki.lyx.org/LyX/LyXOnCygwin
Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
Gunnar wrote:
What is the bare minimum for a LyX installation if the only thing that should
be done is writing new LyX documents and producing pdf's?
LyX, LaTeX, ghostscript, what else? As I remember, the LyX installer installed
both Perl and Python. Will LyX work without them?
The reason
On Thu, Feb 16, 2006 at 07:35:14PM -0600, Stacia Hartleben wrote:
Wow, I actually did get it to work, which is sad since the support is
going away in 1.4!
It will come back.
If I had known that only a single person was actively using that thing I
would not have removed it.
Andre'
Stephen Harris [EMAIL PROTECTED] writes:
The Pre5 doesn't have a configure file to execute
the several ./configure switches in Enrico's Howto.
Are you sure? The lyx-1.4.0pre5.tar.bz2 archive I downloaded from
ftp://ftp.devel.lyx.org/pub/lyx/pre/ had one ...
Yes, I am sure that in
Dear All
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture on the PDF document. On the command line, it
appears the following:
$ /usr/share/lyx/scripts/convertDefault.sh ERROR
Execution of convert failed.
$
Any clue?
Thanks in
Paul Smith wrote:
Dear All
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture on the PDF document. On the command line, it
appears the following:
$ /usr/share/lyx/scripts/convertDefault.sh ERROR
Execution of convert failed.
$
Any
Paul Smith wrote:
Dear All
I have a diagram which I can export as PNG, JPG, PDF or SVG. What
should I do so that the text of the diagram appears with the same font
of the main document? Is that possible?
Thanks in advance,
Paul
Whether you can annotate the diagram in the same font boils
What version was it that you tried with? I think (am hoping) that 1.3.7
and then 1.4 should be better...
Cheers
JP
Bo Peng wrote:
Can anyone tell me if there is an up-to-date HOWTO somewhere for using
Lyx for DocBook output of software user's manuals?
Personally I am using
On 2/17/06, Paul A. Rubin [EMAIL PROTECTED] wrote:
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture on the PDF document. On the command line, it
appears the following:
$ /usr/share/lyx/scripts/convertDefault.sh ERROR
On 2/17/06, Paul A. Rubin [EMAIL PROTECTED] wrote:
I have a diagram which I can export as PNG, JPG, PDF or SVG. What
should I do so that the text of the diagram appears with the same font
of the main document? Is that possible?
Whether you can annotate the diagram in the same font boils
I've
\setlength{\parskip {-1pt}}
but that seems only to affect the vertical space between
paragraphs. How can I set the vertical space length between sections
and figures?
It's quite urgent as I am trying to fit this paper into a ridiculous
6-page limit.
TIA
--
I've
\setlength{\parskip {-1pt}}
but that seems only to affect the vertical space
between
paragraphs. How can I set the vertical space length
between sections
and figures?
If you use titlesec package you get total control over
title of section: font size, space before and after
title,
- Original Message -
From: Paul Smith [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: Friday, February 17, 2006 2:17 PM
Subject: LyX fails picture conversion
Dear All
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture
4) I lost feature: in paragraph settings I can´t
find
skip spaces for before and after. This feature was
present in 1.3.6.
Hi Marcelo,
this is present but elsewhere, search for
Insert-Special Character-Vertical
Space
Yes, I found it. Thanks.
Now, I can´t find Navigate to
I tried to get Covington (numbered examples) working but I can't seem
to do it using this same method. Everyone please vote on this bug at
bugzilla, or add comments: http://bugzilla.lyx.org/show_bug.cgi?id=325
I've set up covington by wiring it in as a paragraph environment and
modifying the
What is the bare minimum for a LyX installation if the only thing that should
be done is writing new LyX documents and producing pdf's?
LyX, LaTeX, ghostscript, what else? As I remember, the LyX installer installed
both Perl and Python. Will LyX work without them?
The reason for asking is that
Stephen Harris [EMAIL PROTECTED] writes:
Maybe that sounded complicated, but it takes less than
15 seconds to switch back and forth by renaming folders.
I don't know if it is this easy using Linux, but there should
be a way.
You need not renaming your folders. Call one folder LyX137 and the
http://wiki.lyx.org/LyX/LyXOnCygwin
Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
(replace x ^ to match your archive name)
I was reading over Enrico's detailed instructions.
I can't find a lyx 1.4.0.tar.bz2 or tar.gz for download.
The Pre5 doesn't have a configure file to execute
the
Sanders, Maarten (M.J.L. [EMAIL PROTECTED] writes:
Is there some way (e.g. in a .layout) to tell LyX to automatically
center the contents of a float environment (image and caption)?
Put the following in the preamble:
\renewenvironment{figure}[1][]{%
[EMAIL PROTECTED]
\centering
Stephen Harris [EMAIL PROTECTED] writes:
http://wiki.lyx.org/LyX/LyXOnCygwin
Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
(replace x ^ to match your archive name)
I was reading over Enrico's detailed instructions.
I can't find a lyx 1.4.0.tar.bz2 or tar.gz for download.
Well,
On Friday 17 February 2006 02:30, Tom Poe wrote:
Stephen: Well, futzed around, then decided to log out, set session to
KDE, and ran the command, 'yum xforms'. It worked magically! This was
my first experience with yum. I then ran the command 'yum install lyx'
and again, magic! I am now up
On Fri, 17 Feb 2006, Anders Ekberg wrote:
Thanks Christian,
I will try to upload the pictures and add additional material (you're
right, the example files could be good). I will also try to continue
with instruction on how to add templates, etc. Unfortunately I'm
locked up until the
Marcelo Acuña wrote:
I can't to use spellchecker. Accented letters
and ñ, Ñ are not recognized by ispell, aspell.
Common problem for unicode users, because
lyx doesn't support unicode. That cause trouble
when the spellchekcer expects unicode while lyx
gives it iso8859 encoded
Stacia Hartleben wrote:
Hi there! I was messing around after looking at this tutorial
(http://wiki.lyx.org/LyX/XY-pic) on how to get XY pic to work on LyX
and I got some limited tree support with xytree and TIPA working!
That's nice indeed. Even if I knew we have some provisional code for tipa
Dear Lyx users,
I am writing a document with the bibliography given as footnotes, thanks
to the footbib package. I would like to insert comments, usually given
as footnotes, as a part of the bibliography. In other words, is it
possible to number these comments within the numbering scheme of
Tom Poe wrote:
I checked for xforms download, and ran into problems trying to locate
the proper file. The Redhat link for rpm, for example, gave me an error
message that it couldn't change ftp directory. Does anyone know where I
can download Xforms files? Or, should I try to use QT, and
Juergen Spitzmueller wrote:
Concerning TIPA, I'm tempted to have a look in the next development cycle (for
1.5), but don't hold your breath. There are so many things to do, and even if
I'm a linguist myself, I don't need phonetic symbols frequently enough to get
annoyed by the lacking support
Herbert Voss wrote:
do you know the following packages?
Linguistic tree diagrams for Role and Reference Grammar (RRG)
http://www.ctan.org/tex-archive/macros/latex/contrib/rrgtrees
typesetting of trees that are common in linguistics
Helge Hafting wrote:
Showing the generated index is indeed possible, by
using the existing mechanism for showing rendered formulas. Well,
it takes a lot more time as you typically need to render the entire
document to get the page numbers. So index preview should
be optional.
Another
Juergen Spitzmueller wrote:
Herbert Voss wrote:
do you know the following packages?
Linguistic tree diagrams for Role and Reference Grammar (RRG)
http://www.ctan.org/tex-archive/macros/latex/contrib/rrgtrees
typesetting of trees that are common in linguistics
I'd be happy to make an info page on the lyx wiki, except would it
really be useful, now that 1.4 is going to get rid of the xymatrix
support? That makes me really sad :(
On 2/17/06, Juergen Spitzmueller [EMAIL PROTECTED] wrote:
Herbert Voss wrote:
do you know the following packages?
On Fri, 17 Feb 2006, Jack M. Lyon wrote:
Usually indexers don't care so much about seeing the actual page numbers,
but they do care about seeing the *structure* of the index as they work.
Which brings up another issue that might be a wrench in the gears:
different standards for indexes
Stacia Hartleben wrote:
I'd be happy to make an info page on the lyx wiki, except would it
really be useful, now that 1.4 is going to get rid of the xymatrix
support? That makes me really sad :(
at least the tipa part will be useful.
Jürgen
Herbert Voss wrote:
here are some examples with code
I see that your book grew quite a bit ;-)
Jürgen
Can anyone tell me if there is an up-to-date HOWTO somewhere for using
Lyx for DocBook output of software user's manuals?
Personally I am using python/manual.cls and an adapted layout file.
This works reasonably well but there is no chm output and other fancy
stuff.
I tried the lyx/docbook
Stacia, this is great--I thought the only way to do trees and IPA in
LyX was in ERT. I don't know how many linguists are on this list, but
what do people think of starting a wiki page LyX for Linguists,
similar to LaTeX for linguists?
http://www.essex.ac.uk/linguistics/clmt/latex4ling/
Jose' Matos wrote:
On Friday 17 February 2006 02:30, Tom Poe wrote:
Stephen: Well, futzed around, then decided to log out, set session to
KDE, and ran the command, 'yum xforms'. It worked magically! This was
my first experience with yum. I then ran the command 'yum install lyx'
and
I tried to get Covington (numbered examples) working but I can't seem
to do it using this same method. Everyone please vote on this bug at
bugzilla, or add comments: http://bugzilla.lyx.org/show_bug.cgi?id=325
It's obvious LyX can support this stuff, we just have to get it
implemented in a better
Can anyone tell me how to use oldstyle figures in my body text (i.e.,
text figures or the j version of the fonts)
and lining figures for my footnotes (the x version of the font)?
I prefer the appearance of osf, but in the footnotes I must use a more
scientific look.
(I've asked this
Hi all,
rumors are that LyX 1.4 is not going to support XY-Pic
anymore. I cannot believe that the developers are serious
about this. If they were, the reasons for me to use LyX
would be gone. To name these reasons specifically, they
are:
Instant-preview
XY-Pic
and, last but not least Uwe's
Dear All
I have a diagram which I can export as PNG, JPG, PDF or SVG. What
should I do so that the text of the diagram appears with the same font
of the main document? Is that possible?
Thanks in advance,
Paul
- Original Message -
From: Enrico Forestieri [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: Friday, February 17, 2006 2:20 AM
Subject: Re: LyX on Cygwin
Stephen Harris [EMAIL PROTECTED] writes:
http://wiki.lyx.org/LyX/LyXOnCygwin
Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
Gunnar wrote:
What is the bare minimum for a LyX installation if the only thing that should
be done is writing new LyX documents and producing pdf's?
LyX, LaTeX, ghostscript, what else? As I remember, the LyX installer installed
both Perl and Python. Will LyX work without them?
The reason
On Thu, Feb 16, 2006 at 07:35:14PM -0600, Stacia Hartleben wrote:
Wow, I actually did get it to work, which is sad since the support is
going away in 1.4!
It will come back.
If I had known that only a single person was actively using that thing I
would not have removed it.
Andre'
Stephen Harris [EMAIL PROTECTED] writes:
The Pre5 doesn't have a configure file to execute
the several ./configure switches in Enrico's Howto.
Are you sure? The lyx-1.4.0pre5.tar.bz2 archive I downloaded from
ftp://ftp.devel.lyx.org/pub/lyx/pre/ had one ...
Yes, I am sure that in
Dear All
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture on the PDF document. On the command line, it
appears the following:
$ /usr/share/lyx/scripts/convertDefault.sh ERROR
Execution of convert failed.
$
Any clue?
Thanks in
Paul Smith wrote:
Dear All
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture on the PDF document. On the command line, it
appears the following:
$ /usr/share/lyx/scripts/convertDefault.sh ERROR
Execution of convert failed.
$
Any
Paul Smith wrote:
Dear All
I have a diagram which I can export as PNG, JPG, PDF or SVG. What
should I do so that the text of the diagram appears with the same font
of the main document? Is that possible?
Thanks in advance,
Paul
Whether you can annotate the diagram in the same font boils
What version was it that you tried with? I think (am hoping) that 1.3.7
and then 1.4 should be better...
Cheers
JP
Bo Peng wrote:
Can anyone tell me if there is an up-to-date HOWTO somewhere for using
Lyx for DocBook output of software user's manuals?
Personally I am using
On 2/17/06, Paul A. Rubin [EMAIL PROTECTED] wrote:
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture on the PDF document. On the command line, it
appears the following:
$ /usr/share/lyx/scripts/convertDefault.sh ERROR
On 2/17/06, Paul A. Rubin [EMAIL PROTECTED] wrote:
I have a diagram which I can export as PNG, JPG, PDF or SVG. What
should I do so that the text of the diagram appears with the same font
of the main document? Is that possible?
Whether you can annotate the diagram in the same font boils
I've
\setlength{\parskip {-1pt}}
but that seems only to affect the vertical space between
paragraphs. How can I set the vertical space length between sections
and figures?
It's quite urgent as I am trying to fit this paper into a ridiculous
6-page limit.
TIA
--
I've
\setlength{\parskip {-1pt}}
but that seems only to affect the vertical space
between
paragraphs. How can I set the vertical space length
between sections
and figures?
If you use titlesec package you get total control over
title of section: font size, space before and after
title,
- Original Message -
From: Paul Smith [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: Friday, February 17, 2006 2:17 PM
Subject: LyX fails picture conversion
Dear All
I have an EPS picture inserted in a LyX document. When I run
View -- PDF (pdflatex)
I do not get the picture
4) I lost feature: in paragraph settings I can´t
find
skip spaces for before and after. This feature was
present in 1.3.6.
Hi Marcelo,
this is present but elsewhere, search for
Insert-Special Character-Vertical
Space
Yes, I found it. Thanks.
Now, I can´t find Navigate to
I tried to get Covington (numbered examples) working but I can't seem
to do it using this same method. Everyone please vote on this bug at
bugzilla, or add comments: http://bugzilla.lyx.org/show_bug.cgi?id=325
I've set up covington by wiring it in as a paragraph environment and
modifying the
What is the bare minimum for a LyX installation if the only thing that should
be done is writing new LyX documents and producing pdf's?
LyX, LaTeX, ghostscript, what else? As I remember, the LyX installer installed
both Perl and Python. Will LyX work without them?
The reason for asking is that
Stephen Harris <[EMAIL PROTECTED]> writes:
> Maybe that sounded complicated, but it takes less than
> 15 seconds to switch back and forth by renaming folders.
> I don't know if it is this easy using Linux, but there should
> be a way.
You need not renaming your folders. Call one folder LyX137
http://wiki.lyx.org/LyX/LyXOnCygwin
"Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
(replace x ^ to match your archive name)"
I was reading over Enrico's detailed instructions.
I can't find a lyx 1.4.0.tar.bz2 or tar.gz for download.
The Pre5 doesn't have a configure file to execute
the
Sanders, Maarten (M.J.L. <[EMAIL PROTECTED]> writes:
> Is there some way (e.g. in a .layout) to tell LyX to automatically
> center the contents of a float environment (image and caption)?
Put the following in the preamble:
\renewenvironment{figure}[1][]{%
[EMAIL PROTECTED]
\centering
Stephen Harris <[EMAIL PROTECTED]> writes:
> http://wiki.lyx.org/LyX/LyXOnCygwin
>
> "Unpack lyx-1.4.x.tar.bz2 in /usr/local/src
> (replace x ^ to match your archive name)"
>
> I was reading over Enrico's detailed instructions.
>
> I can't find a lyx 1.4.0.tar.bz2 or tar.gz for
On Friday 17 February 2006 02:30, Tom Poe wrote:
> Stephen: Well, futzed around, then decided to log out, set session to
> KDE, and ran the command, 'yum xforms'. It worked magically! This was
> my first experience with yum. I then ran the command 'yum install lyx'
> and again, magic! I am
On Fri, 17 Feb 2006, Anders Ekberg wrote:
> Thanks Christian,
>
> I will try to upload the pictures and add additional material (you're
> right, the example files could be good). I will also try to continue
> with instruction on how to add templates, etc. Unfortunately I'm
> locked up
Marcelo Acuña wrote:
I can't to use spellchecker. Accented letters
and ñ, Ñ are not recognized by ispell, aspell.
Common problem for unicode users, because
lyx doesn't support unicode. That cause trouble
when the spellchekcer expects unicode while lyx
gives it iso8859 encoded
Stacia Hartleben wrote:
> Hi there! I was messing around after looking at this tutorial
> (http://wiki.lyx.org/LyX/XY-pic) on how to get XY pic to work on LyX
> and I got some limited tree support with xytree and TIPA working!
That's nice indeed. Even if I knew we have some provisional code for
Dear Lyx users,
I am writing a document with the bibliography given as footnotes, thanks
to the footbib package. I would like to insert comments, usually given
as footnotes, as a part of the bibliography. In other words, is it
possible to number these comments within the numbering scheme of
Tom Poe wrote:
I checked for xforms download, and ran into problems trying to locate
the proper file. The Redhat link for rpm, for example, gave me an error
message that it couldn't change ftp directory. Does anyone know where I
can download Xforms files? Or, should I try to use QT, and
Juergen Spitzmueller wrote:
Concerning TIPA, I'm tempted to have a look in the next development cycle (for
1.5), but don't hold your breath. There are so many things to do, and even if
I'm a linguist myself, I don't need phonetic symbols frequently enough to get
annoyed by the lacking support
Herbert Voss wrote:
> do you know the following packages?
>
> Linguistic tree diagrams for Role and Reference Grammar (RRG)
> http://www.ctan.org/tex-archive/macros/latex/contrib/rrgtrees
>
> typesetting of trees that are common in linguistics
>
Helge Hafting wrote:
> Showing the generated index is indeed possible, by
> using the existing mechanism for showing rendered formulas. Well,
> it takes a lot more time as you typically need to render the entire
> document to get the page numbers. So "index preview" should
> be optional.
Juergen Spitzmueller wrote:
Herbert Voss wrote:
do you know the following packages?
Linguistic tree diagrams for Role and Reference Grammar (RRG)
http://www.ctan.org/tex-archive/macros/latex/contrib/rrgtrees
typesetting of trees that are common in linguistics
I'd be happy to make an info page on the lyx wiki, except would it
really be useful, now that 1.4 is going to get rid of the xymatrix
support? That makes me really sad :(
On 2/17/06, Juergen Spitzmueller <[EMAIL PROTECTED]> wrote:
> Herbert Voss wrote:
> > do you know the following packages?
> >
On Fri, 17 Feb 2006, Jack M. Lyon wrote:
Usually indexers don't care so much about seeing the actual page numbers,
but they do care about seeing the *structure* of the index as they work.
Which brings up another issue that might be a wrench in the gears:
different standards for indexes
Stacia Hartleben wrote:
> I'd be happy to make an info page on the lyx wiki, except would it
> really be useful, now that 1.4 is going to get rid of the xymatrix
> support? That makes me really sad :(
at least the tipa part will be useful.
Jürgen
1 - 100 of 123 matches
Mail list logo
