Daniel Lohmann wrote:
@Jürgen: Any recent changes on your e-mail setup? Since this morning,
the Umlauts in your full name (FROM name) are scrumbled, at least when
using Apple Mail. All former mails from you (including the one from
yesterday) show the expected full name, though.
No, I
I am not sure if Charles' solution will always work. I myself had a similiar problem. I had several child documents, each of them
describing a chapter of a book. One of the child documents had an appendix, and the result was that all the child documents (i.e.
chapters) following the one with the
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen mode (pressing F11) when no document is opened (i.e. just the
welcome screen with the LyX logo is visible), I cannot go back. Nothing works. Neither F11 nor Ctrl-Q nor any other thing. LyX hangs
and I have to kill it. Can
Public release of LyX version 1.5.7
We are pleased to announce the release of LyX 1.5.7. This is the sixth
maintenance release in the 1.5.x cycle and it is expected to be the final
release in this series, since a new series of stable releases has just been
A S wrote:
Hi,
Instant Preview doesn't work well for me with LyX 1.6.0. It only
displays certain parts of the maths formulas. In contrast, LyX 1.5.3
never had a problem with this (although some earlier versions did, as
well).
Can this be fixed somehow? Howcome it works with 1.5.3 but not 1.6.0
When I run configure.py on my Mandriva system, I get this:
[EMAIL PROTECTED] lyx]# ./configure.py
checking for a Latex2e program...
+checking for latex... yes
checking for a DVI postprocessing program...
+checking for pplatex... no
checking for pLaTeX, the Japanese LaTeX...
+checking for
Uwe Stöhr wrote:
Hello LyXers,
I uploaded version 4.13 of the LyXWinInstaller that installs the new LyX
1.6.0.
LyX 1.6 is a major release, hterefore no update installer is provided.
You can install LyX 1.6.0 without problems to computers where LyX 1.5.x
is already installed.
The installer
Yes, thanks. Seems related, I'll add to the comments there.
This problem is easy to avoid, if you know about it.
-Ivan
On Nov 14, 2008, at 2:19 AM, Stefan Schimanski wrote:
It's probably the same problem as described here:
http://bugzilla.lyx.org/show_bug.cgi?id=5274
Stefan
Am 13.11.2008
Manoj Rajagopalan wrote:
Cool! i'm currently using v1.5.6 and a v1.6 update isn't yet available
for my platform (FC8 rpm)
Yes, but it's easy to compile yourself on FC8. Hard to know if 1.6 will
get packaged for FC8.
rh
Nicolás wrote:
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen
mode (pressing F11) when no document is opened (i.e. just the welcome
screen with the LyX logo is visible), I cannot go back. Nothing works.
Neither F11 nor Ctrl-Q nor any other thing. LyX hangs and I
Working as a charm in Ubuntu 8.10.
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 2:00 PM, rgheck [EMAIL PROTECTED] wrote:
Nicolás wrote:
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen mode
(pressing F11)
Nicolás wrote:
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen
mode (pressing F11) when no document is opened (i.e. just the welcome
screen with the LyX logo is visible), I cannot go back. Nothing works.
Neither F11 nor Ctrl-Q nor any other thing. LyX hangs and I
Cameron Stone wrote:
Hi everybody.
I just had compiz (my Linux window manager) crash and subsequently I
lost about an hours work in lyx. When I restarted lyx (1.5.6 - under
ubuntu intrepid ibex) it asked some questions (I think about the file
already being open or something), and I foolishly
Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX fails
to add an empty
My question is I have downloaded a LyX-1.6.0-1-Installer.exe version
in 2008 Nov-11th. I'm not sure what's the difference between this
version LyX-160-4-13-AltInstaller-Small.exe ?
see here: ftp://ftp.lyx.org/pub/lyx/bin/1.5.7/AltInstaller-README.txt
and here:
Konrad Hofbauer wrote:
Do not change the mac.bind - file. Instead, make your OWN bind file
(with a different name, eg. MYFILE.bind) in the user directory, which
INCLUDES the original mac.bind file with
\bind_file mac.bind
and then redefine what you want different (what comes 'last' wins!)
I am trying to get up and running with Lyx and R, using Sweave
I have achieved this on my Windows XP PC at work with MikTex. Great.
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have come
up against a “brick wall”
Lyx 1.6 is installed and I can generate dvi files from simple
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
In 1.5.7, I don't know.
/Konrad
mikeandkatedunbar wrote:
I am trying to get up and running with Lyx and R, using Sweave
I have achieved this on my Windows XP PC at work with MikTex. Great.
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have come up
against a “brick wall”
Lyx 1.6 is installed and I can
mikeandkatedunbar [EMAIL PROTECTED] writes:
I get the same old message
“The layout file requested by this document, literate-article.layout,
is not usable. This is probably because a LaTeX class or style file
required by it is not available. ”
This is because the document class expect to
mikeandkatedunbar wrote:
I am trying to get up and running with Lyx and R, using Sweave
I have not tried that before, nevertheless ...
I have achieved this on my Windows XP PC at work with MikTex. Great.
Also using LyX 1.6 ?
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have
Julio Rojas wrote:
Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX
On Fri, Nov 14, 2008 at 9:43 AM, Konrad Hofbauer
[EMAIL PROTECTED] wrote:
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
The GUI is broken here; see:
Konrad Hofbauer wrote:
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
Thanks, both work (c:
I used the GUI to 'Remove' the entry for 'command-execute' and
afterwards had
Bennett Helm wrote:
On Fri, Nov 14, 2008 at 9:43 AM, Konrad Hofbauer
[EMAIL PROTECTED] wrote:
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
The GUI is broken here;
On 14 Nov 2008, at 14:50, Philippe Grosjean wrote:
mikeandkatedunbar wrote:
I am trying to get up and running with Lyx and R, using Sweave
I have achieved this on my Windows XP PC at work with MikTex. Great.
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have
come up against a
Julio Rojas [EMAIL PROTECTED] writes:
I'm attaching the short LyX document and
both, the correct LaTeX code and the incorrect one (generated by LyX).
The two TeX files look identical to me...
JMarc
Except for the extra empty line between the two blocks.
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
Julio Rojas [EMAIL PROTECTED] writes:
I'm attaching the short LyX document and
Yup, you are right. Find included the correct version of the incorrect
document. :D
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
Julio Rojas [EMAIL PROTECTED] writes:
I'm
Julio Rojas schrieb:
Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown.
Because ACM is a conference class. So you have to specify the conference
as I did in the attached file.
LyX 1.5.7 and 1.6.0
The problem was the lack of the three }{ needed in the author
environment. Can this be solved adding the extra empty line when the
author only has a name but no afiliation or email?
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 5:24 PM,
Hi, I would refer to LyX in my Acknowledgements and would like to hyperlink
the \lyx symbol to the the website. I tried doing this by entering the LaTeX
command, \href{http://www.lyx.org/}{\LyX}. The strange thing is that this
sometimes works, but mostly returns an error when I compile my
Sorry, I hit send to early by mistake.
Hi, I would like to refer to LyX in my Acknowledgements and would like to
hyperlink the \lyx symbol to the website. I tried doing this by entering the
LaTeX command,
\href{http://www.lyx.org/}{\LyXhttp://www.lyx.org/%7D%7B%5CLyX}.
The strange thing is that
Christopher Reeve wrote:
Sorry, I hit send to early by mistake.
Hi, I would like to refer to LyX in my Acknowledgements and would like to
hyperlink the \lyx symbol to the website. I tried doing this by entering the
LaTeX command,
Hi all,
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
read 1.5.x files.
I attach a file example which could not be opened on Vista, but could on
WinXP:
Dominik »Ingrid« Waßenhoven wrote:
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
read 1.5.x files.
I forgot: I used Uwe's AltInstaller.
Regards,
Dominik.-
Hi
I have just installed 1.6.0 bundled on a windows vista business machine. I
have used lyx 1.5 on a different machine in the past.
Congratulations on the great new build.
I have two problems:
1. The templates are in French - how do I switch to English version for the
templates.
2. The command
Hi,
I wanted to create quite a big document. I use a lot inserting child
documents. I've created a script called latex_pl which inserts ~
between every letter a, e, i, o and so on. It's required by polish
typography. (for example - you shouldn't leave letter a alone on the
end of a line;
Dominik Waßenhoven wrote:
Dominik »Ingrid« Waßenhoven wrote:
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
read 1.5.x files.
I forgot: I used Uwe's AltInstaller.
Opening a 1.5.x doc requires
2008/11/13 ekpyrotic [EMAIL PROTECTED]:
How do I get a square root sign?
--
View this message in context:
http://n2.nabble.com/Square-root-sign-tp1495123p1495123.html
Sent from the LyX - Users mailing list archive at Nabble.com.
To do it through the toolbars can be a little tricky
I have the same problem in Windows Vista with the Uwe's AltInstaller.
Sergio
Dominik Waßenhoven escribió:
Dominik »Ingrid« Waßenhoven wrote:
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
Debian: http://packages.debian.org/sid/lyx
Ubuntu: http://packages.ubuntu.com/jaunty/lyx
I'll be trying the ubuntu one later today...
Cameron
Dear All,
I am currently finalising my PhD dissertation in Law. I'm using Lyx 1.6 on
windows xp (no package yet for lyx 1.6 on my mandriva :-)) and would need
some help.
The class document I use is book (koma-script). The first think I would like
to do is to to avoid indentation within the
The problem is that the \LyX macro is only defined if you type LyX
somewhere in your document. You could define it yourself in the
preamble---look at the LaTeX of a document that contains LyX to see the
code.
rh
Great. Thanks, Found the code.
Chris.
Hi,
My document is of documentclass book (ams). When trying to create
the DVI, I get the following weird error messages immediately after the
first character of the first word of the paragraph body:
Missing number, treated as zero
Illegal measure of unit, pt inserted
I am not able to
Hi all,
I found the solution to this problem - the AMS book class doesn't
support numbering for Paragraph and Subparagraph so I undid the outline
numbering for paragraphs and got it to not get listed in the TOC and
these errors went away.
-- Manoj
Manoj Rajagopalan wrote:
Hi,
My
Hi all!I'm trying to use citesort
citesort.sty
Description: Binary data
on LyX 1.6.0 on Mac OS X by just putting \usepackage{citesort} in the preamble. However, when I try to use it, it gives the following error:"A number should have been here; I inserted `0'.(If you can't figure out why I needed
Daniel Lohmann wrote:
@Jürgen: Any recent changes on your e-mail setup? Since this morning,
the Umlauts in your full name (FROM name) are scrumbled, at least when
using Apple Mail. All former mails from you (including the one from
yesterday) show the expected full name, though.
No, I
I am not sure if Charles' solution will always work. I myself had a similiar problem. I had several child documents, each of them
describing a chapter of a book. One of the child documents had an appendix, and the result was that all the child documents (i.e.
chapters) following the one with the
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen mode (pressing F11) when no document is opened (i.e. just the
welcome screen with the LyX logo is visible), I cannot go back. Nothing works. Neither F11 nor Ctrl-Q nor any other thing. LyX hangs
and I have to kill it. Can
Public release of LyX version 1.5.7
We are pleased to announce the release of LyX 1.5.7. This is the sixth
maintenance release in the 1.5.x cycle and it is expected to be the final
release in this series, since a new series of stable releases has just been
A S wrote:
Hi,
Instant Preview doesn't work well for me with LyX 1.6.0. It only
displays certain parts of the maths formulas. In contrast, LyX 1.5.3
never had a problem with this (although some earlier versions did, as
well).
Can this be fixed somehow? Howcome it works with 1.5.3 but not 1.6.0
When I run configure.py on my Mandriva system, I get this:
[EMAIL PROTECTED] lyx]# ./configure.py
checking for a Latex2e program...
+checking for latex... yes
checking for a DVI postprocessing program...
+checking for pplatex... no
checking for pLaTeX, the Japanese LaTeX...
+checking for
Uwe Stöhr wrote:
Hello LyXers,
I uploaded version 4.13 of the LyXWinInstaller that installs the new LyX
1.6.0.
LyX 1.6 is a major release, hterefore no update installer is provided.
You can install LyX 1.6.0 without problems to computers where LyX 1.5.x
is already installed.
The installer
Yes, thanks. Seems related, I'll add to the comments there.
This problem is easy to avoid, if you know about it.
-Ivan
On Nov 14, 2008, at 2:19 AM, Stefan Schimanski wrote:
It's probably the same problem as described here:
http://bugzilla.lyx.org/show_bug.cgi?id=5274
Stefan
Am 13.11.2008
Manoj Rajagopalan wrote:
Cool! i'm currently using v1.5.6 and a v1.6 update isn't yet available
for my platform (FC8 rpm)
Yes, but it's easy to compile yourself on FC8. Hard to know if 1.6 will
get packaged for FC8.
rh
Nicolás wrote:
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen
mode (pressing F11) when no document is opened (i.e. just the welcome
screen with the LyX logo is visible), I cannot go back. Nothing works.
Neither F11 nor Ctrl-Q nor any other thing. LyX hangs and I
Working as a charm in Ubuntu 8.10.
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 2:00 PM, rgheck [EMAIL PROTECTED] wrote:
Nicolás wrote:
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen mode
(pressing F11)
Nicolás wrote:
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen
mode (pressing F11) when no document is opened (i.e. just the welcome
screen with the LyX logo is visible), I cannot go back. Nothing works.
Neither F11 nor Ctrl-Q nor any other thing. LyX hangs and I
Cameron Stone wrote:
Hi everybody.
I just had compiz (my Linux window manager) crash and subsequently I
lost about an hours work in lyx. When I restarted lyx (1.5.6 - under
ubuntu intrepid ibex) it asked some questions (I think about the file
already being open or something), and I foolishly
Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX fails
to add an empty
My question is I have downloaded a LyX-1.6.0-1-Installer.exe version
in 2008 Nov-11th. I'm not sure what's the difference between this
version LyX-160-4-13-AltInstaller-Small.exe ?
see here: ftp://ftp.lyx.org/pub/lyx/bin/1.5.7/AltInstaller-README.txt
and here:
Konrad Hofbauer wrote:
Do not change the mac.bind - file. Instead, make your OWN bind file
(with a different name, eg. MYFILE.bind) in the user directory, which
INCLUDES the original mac.bind file with
\bind_file mac.bind
and then redefine what you want different (what comes 'last' wins!)
I am trying to get up and running with Lyx and R, using Sweave
I have achieved this on my Windows XP PC at work with MikTex. Great.
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have come
up against a “brick wall”
Lyx 1.6 is installed and I can generate dvi files from simple
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
In 1.5.7, I don't know.
/Konrad
mikeandkatedunbar wrote:
I am trying to get up and running with Lyx and R, using Sweave
I have achieved this on my Windows XP PC at work with MikTex. Great.
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have come up
against a “brick wall”
Lyx 1.6 is installed and I can
mikeandkatedunbar [EMAIL PROTECTED] writes:
I get the same old message
“The layout file requested by this document, literate-article.layout,
is not usable. This is probably because a LaTeX class or style file
required by it is not available. ”
This is because the document class expect to
mikeandkatedunbar wrote:
I am trying to get up and running with Lyx and R, using Sweave
I have not tried that before, nevertheless ...
I have achieved this on my Windows XP PC at work with MikTex. Great.
Also using LyX 1.6 ?
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have
Julio Rojas wrote:
Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX
On Fri, Nov 14, 2008 at 9:43 AM, Konrad Hofbauer
[EMAIL PROTECTED] wrote:
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
The GUI is broken here; see:
Konrad Hofbauer wrote:
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
Thanks, both work (c:
I used the GUI to 'Remove' the entry for 'command-execute' and
afterwards had
Bennett Helm wrote:
On Fri, Nov 14, 2008 at 9:43 AM, Konrad Hofbauer
[EMAIL PROTECTED] wrote:
Dominik Waßenhoven wrote:
An additional question to this: Is it also possible to 'delete' a key
binding?
In LyX 1.6.0, I think there is an \unbind, or just use the GUI.
The GUI is broken here;
On 14 Nov 2008, at 14:50, Philippe Grosjean wrote:
mikeandkatedunbar wrote:
I am trying to get up and running with Lyx and R, using Sweave
I have achieved this on my Windows XP PC at work with MikTex. Great.
HOWEVER On my Mac (OSX 10.4.7 with MacTex 2008 installed) I have
come up against a
Julio Rojas [EMAIL PROTECTED] writes:
I'm attaching the short LyX document and
both, the correct LaTeX code and the incorrect one (generated by LyX).
The two TeX files look identical to me...
JMarc
Except for the extra empty line between the two blocks.
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
Julio Rojas [EMAIL PROTECTED] writes:
I'm attaching the short LyX document and
Yup, you are right. Find included the correct version of the incorrect
document. :D
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
Julio Rojas [EMAIL PROTECTED] writes:
I'm
Julio Rojas schrieb:
Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown.
Because ACM is a conference class. So you have to specify the conference
as I did in the attached file.
LyX 1.5.7 and 1.6.0
The problem was the lack of the three }{ needed in the author
environment. Can this be solved adding the extra empty line when the
author only has a name but no afiliation or email?
-
Julio Rojas
[EMAIL PROTECTED]
On Fri, Nov 14, 2008 at 5:24 PM,
Hi, I would refer to LyX in my Acknowledgements and would like to hyperlink
the \lyx symbol to the the website. I tried doing this by entering the LaTeX
command, \href{http://www.lyx.org/}{\LyX}. The strange thing is that this
sometimes works, but mostly returns an error when I compile my
Sorry, I hit send to early by mistake.
Hi, I would like to refer to LyX in my Acknowledgements and would like to
hyperlink the \lyx symbol to the website. I tried doing this by entering the
LaTeX command,
\href{http://www.lyx.org/}{\LyXhttp://www.lyx.org/%7D%7B%5CLyX}.
The strange thing is that
Christopher Reeve wrote:
Sorry, I hit send to early by mistake.
Hi, I would like to refer to LyX in my Acknowledgements and would like to
hyperlink the \lyx symbol to the website. I tried doing this by entering the
LaTeX command,
Hi all,
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
read 1.5.x files.
I attach a file example which could not be opened on Vista, but could on
WinXP:
Dominik »Ingrid« Waßenhoven wrote:
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
read 1.5.x files.
I forgot: I used Uwe's AltInstaller.
Regards,
Dominik.-
Hi
I have just installed 1.6.0 bundled on a windows vista business machine. I
have used lyx 1.5 on a different machine in the past.
Congratulations on the great new build.
I have two problems:
1. The templates are in French - how do I switch to English version for the
templates.
2. The command
Hi,
I wanted to create quite a big document. I use a lot inserting child
documents. I've created a script called latex_pl which inserts ~
between every letter a, e, i, o and so on. It's required by polish
typography. (for example - you shouldn't leave letter a alone on the
end of a line;
Dominik Waßenhoven wrote:
Dominik »Ingrid« Waßenhoven wrote:
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
read 1.5.x files.
I forgot: I used Uwe's AltInstaller.
Opening a 1.5.x doc requires
2008/11/13 ekpyrotic [EMAIL PROTECTED]:
How do I get a square root sign?
--
View this message in context:
http://n2.nabble.com/Square-root-sign-tp1495123p1495123.html
Sent from the LyX - Users mailing list archive at Nabble.com.
To do it through the toolbars can be a little tricky
I have the same problem in Windows Vista with the Uwe's AltInstaller.
Sergio
Dominik Waßenhoven escribió:
Dominik »Ingrid« Waßenhoven wrote:
I installed LyX 1.6.0 on WinXP without problems and can open lyx files
of the 1.5.x series. But on Windows Vista, the same installation cannot
Debian: http://packages.debian.org/sid/lyx
Ubuntu: http://packages.ubuntu.com/jaunty/lyx
I'll be trying the ubuntu one later today...
Cameron
Dear All,
I am currently finalising my PhD dissertation in Law. I'm using Lyx 1.6 on
windows xp (no package yet for lyx 1.6 on my mandriva :-)) and would need
some help.
The class document I use is book (koma-script). The first think I would like
to do is to to avoid indentation within the
The problem is that the \LyX macro is only defined if you type LyX
somewhere in your document. You could define it yourself in the
preamble---look at the LaTeX of a document that contains LyX to see the
code.
rh
Great. Thanks, Found the code.
Chris.
Hi,
My document is of documentclass book (ams). When trying to create
the DVI, I get the following weird error messages immediately after the
first character of the first word of the paragraph body:
Missing number, treated as zero
Illegal measure of unit, pt inserted
I am not able to
Hi all,
I found the solution to this problem - the AMS book class doesn't
support numbering for Paragraph and Subparagraph so I undid the outline
numbering for paragraphs and got it to not get listed in the TOC and
these errors went away.
-- Manoj
Manoj Rajagopalan wrote:
Hi,
My
Hi all!I'm trying to use citesort
citesort.sty
Description: Binary data
on LyX 1.6.0 on Mac OS X by just putting \usepackage{citesort} in the preamble. However, when I try to use it, it gives the following error:"A number should have been here; I inserted `0'.(If you can't figure out why I needed
Daniel Lohmann wrote:
> @Jürgen: Any recent changes on your e-mail setup? Since this morning,
> the Umlauts in your full name (FROM name) are scrumbled, at least when
> using Apple Mail. All former mails from you (including the one from
> yesterday) show the expected full name, though.
No,
I am not sure if Charles' solution will always work. I myself had a similiar problem. I had several child documents, each of them
describing a chapter of a book. One of the child documents had an appendix, and the result was that all the child documents (i.e.
chapters) following the one with the
Hi!
This is related to LyX 1.6 on Windows. When I enter into full-screen mode (pressing F11) when no document is opened (i.e. just the
welcome screen with the LyX logo is visible), I cannot go back. Nothing works. Neither F11 nor Ctrl-Q nor any other thing. LyX hangs
and I have to kill it. Can
Public release of LyX version 1.5.7
We are pleased to announce the release of LyX 1.5.7. This is the sixth
maintenance release in the 1.5.x cycle and it is expected to be the final
release in this series, since a new series of stable releases has just been
A S wrote:
Hi,
Instant Preview doesn't work well for me with LyX 1.6.0. It only
displays certain parts of the maths formulas. In contrast, LyX 1.5.3
never had a problem with this (although some earlier versions did, as
well).
Can this be fixed somehow? Howcome it works with 1.5.3 but not 1.6.0
When I run configure.py on my Mandriva system, I get this:
[EMAIL PROTECTED] lyx]# ./configure.py
checking for a Latex2e program...
+checking for "latex"... yes
checking for a DVI postprocessing program...
+checking for "pplatex"... no
checking for pLaTeX, the Japanese LaTeX...
+checking for
1 - 100 of 141 matches
Mail list logo