On 20 April 2013 15:51, Csikos Bela bcsikos...@freemail.hu wrote:
Hello:
I have a question regarding bibliography/bibtex databases.
Is there a program or script that can use an existing bibliography database
(format is not important, can be bibtex, RIS, etc.) and fetch all of its
records
Thank you very much!
Now everything is working, but I really would like to have different
fonts... Isn't it possible to use two different fonts in one document? I
don't only need Umlauts, but I also need the transcription, and
Schehrezade and Lateef dont recognize the transcription.
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
Thank.
===
Patrick DUPRÉ
Ah yes that's probably the source. I had forgotten the natbibapa. Oh well
it's not that hard to edit a bib file if needed.
From: Julien Rioux jri...@lyx.org
To: lyx-users@lists.lyx.org
Sent: Monday, May 20, 2013 7:44:11 PM
Subject: Re: APA6 vs APA. APA6
The only soluton that I found is: never use \bm but \boldsymbol !
I would be gret if we could have more control of the header
like deactive a package !
Regards.
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and
On 21/05/2013 11:21 AM, Patrick Dupre wrote:
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
Thank.
On 09/05/2013 1:11 PM, Stephen Brooking wrote:
I've tried the same under Windows (I need this to work with LyX under
Windows), setting an environment variable to point to a path (and
reconfiguring and restarting LyX just in case), and specifying that path as
my \filepath, but I still get the
On 02/05/2013 11:10 AM, Jean-Louis GALLINARI wrote:
I receive this message :
Signal SIGSEGV perçu
and I'm asked to send a bug-report then Lyx crashes when I close the
window by clicking ok
I also did not have any problem exporting to either HTML (with htlatex)
or LyXHTML. Which
On 21/10/2012 2:51 AM, Gabi Kedma wrote:
Hi,
I have the following problem:
I am working with the ACM sigplan class and template.
It requires me to specify both 'General Terms' and 'Keywords'.
The template uses:
\begin_layout Terms
and
\begin_layout Keywords
However, when I convert this to PDF,
On Tue, May 21, 2013 at 12:53 PM, Julien Rioux jri...@lyx.org wrote:
On 21/05/2013 11:21 AM, Patrick Dupre wrote:
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
On 21/05/2013 1:20 PM, Scott Kostyshak wrote:
On Tue, May 21, 2013 at 12:53 PM, Julien Rioux jri...@lyx.org wrote:
In document settings:
Edit the local layout to tell LyX that we are providing bm ourself:
Format 35
Provides bm true
Note that (on 2.1git) LyX gives the following warning:
LyX:
On 28/03/2013 1:58 PM, John Kane wrote:
LyX 2.0.5.1 Ubuntu 12.10
I am trying to import and run a LateX file in LyX. The problem arises
when I have a figure with subfigures. A single figure processes with no
problem.
The file is fine in LaTeX but chokes in Lyx. I have seen a few
references to
Am 21.05.2013 15:02, schrieb Muhammed F. Bayraktar:
Now everything is working, but I really would like to have different fonts...
Isn't it possible to
use two different fonts in one document?
No. This would also be against the common typesetting rules I think. But as I
wrote in the Wiki
Am 21.05.2013 02:01, schrieb Julien Rioux:
On 08/04/2013 2:06 PM, ARNOLD STEPHANE wrote:
I think theTutorial misses a sentence in the 2.2.3 section.
I think it should say that pressing Control-Enter in an adress(in a
Letter document) can perform a linebreak. Somehow it should tell it, I
Julian,
Thanks for the explanation.
From: Julien Rioux jri...@lyx.org
To: lyx-users@lists.lyx.org
Sent: Tuesday, May 21, 2013 1:46:54 PM
Subject: Re: LyX ; look up `weird error' in the index to The TeXbook.)
On 28/03/2013 1:58 PM, John Kane wrote:
LyX
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write an AGU journal article using the AGU document class in
LyX, a front-end to MacTex. I have been able to generate a good looking
manuscript with LyX, with one important caveat: the compiled manuscript fails
to include
On 21/05/2013 2:26 PM, John Kane wrote:
Julian,
Thanks for the explanation.
I've just opened http://www.lyx.org/trac/ticket/8690 for this issue.
Cheers,
Julien
OK,
I found it
Hello,
In lyx 2.0.5, I would like to insert a multline formula
(as documented), but I cannot do it because under insert math
all the first part of the options (until array environment) is
not available.
Do I have a package missing?
I attached my configure.log file.
On 11/05/2012 10:50 AM, Alex Vergara Gil wrote:
Hello LyXers!
I have a system with windows 7 which have previously installed python
2.6 for the use of GIMP, this sofware do use python for a lot of things
so I cannot remove it from the system. I want to install LyX in this
system but when I do
Am 21.05.2013 20:25, schrieb xin guo:
All right. Anyway, I have already finished my paper this time. However, I
am sad, as a lyx fan, that there is a package works in Latex but fails in
LyX. Actually, mtpro2 has been the official font of many IEEE magazines.
Don't give up that quickly. Please
On 20/05/2013 7:54 PM, Uwe Stöhr wrote:
Am 20.05.2013 03:33, schrieb dianzi@gmail.com:
Removing the amssymb is the official solution to the conflict problem
between them. You can see it on the web of mtpro2.
I cannot test this because mtpro2 is not part of MiKTeX and TeXLive
because of
On 20/05/2013 7:54 PM, Uwe Stöhr wrote:
Am 20.05.2013 03:33, schrieb dianzi@gmail.com:
Removing the amssymb is the official solution to the conflict problem
between them. You can see it on the web of mtpro2.
I cannot test this because mtpro2 is not part of MiKTeX and TeXLive
because of
Was the ellipsis the path to the LyX installation directory?
If so, check in your user directory. (I think the path to it
appears in Help About).
Paul
Am 21.05.2013 21:39, schrieb Julien Rioux:
As Paul Rubin commented (if you did not see his reply, concider subscribing to
the list)
I read the list via Gmane.
there is
indeed a way to suppress amssymb. You can use the module that he provided or
directly put the
following in document
On 11/05/2012 10:50 AM, Alex Vergara Gil wrote:
I have a system with windows 7 which have previously installed python
2.6 for the use of GIMP, this sofware do use python for a lot of things
so I cannot remove it from the system. I want to install LyX in this
system but when I do that all goes
Hi Gordon,
This is a question for lyx-users list, not lyx-docs. I'm CC'ing
lyx-users. For questions like this, it's always helpful if you send a
LyX minimal example: http://wiki.lyx.org/FAQ/MinimalExample.
Best,
Scott
On Tue, May 21, 2013 at 6:05 PM, Gordon Watson gordon.wat...@me.com wrote:
Am 21.05.2013 20:30, schrieb Julien Rioux:
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write an AGU journal article using the AGU document class in
LyX, a front-end to
MacTex. I have been able to generate a good looking manuscript with LyX, with
one important
On Tue, May 21, 2013 at 6:21 PM, Gordon Watson gordon.wat...@me.com wrote:
My first footnote from Author-footnote comes with an asterisk. The remainder
are not numbered.
Do I need to change footnote style somewhere? Example attached.
You have a lot of stuff in your example. If you delete
Thanks, but I've moved to a different Latex program already. Your
response may have been more helpful to me six months ago.
Kris
On 05/21/2013 03:22 PM, Uwe Stöhr wrote:
Am 21.05.2013 20:30, schrieb Julien Rioux:
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write
On Tue, May 21, 2013 at 6:34 PM, Kristoffer Walker kwal...@ucsd.edu wrote:
Thanks, but I've moved to a different Latex program already. Your
response may have been more helpful to me six months ago.
Kris
Sorry to hear that. All the best in your endeavours!
Cheers,
Julien
Am 22.05.2013 00:05, schrieb Gordon Watson:
Unlike the LyX Tutorial, my footnotes are not numbering.
You use many preamble code. Do you know what this does? If not, please remove anything you don't
understand. This will only make troubles.
- For example you don't need to use \makeatletter in
Am 22.05.2013 00:34, schrieb Kristoffer Walker:
Thanks, but I've moved to a different Latex program already.
It is never too late to give LyX a second try.
regards Uwe
My LyX version is 2.0.5.1; my Mac OSX 10.7.5. I had many problems getting LyX
to work -- sensibly -- for me; and am very nervous with fiddling with the
hit-and-miss additives that now have it working quite well.
My problem will be this: How do I track the consequential changes in the whole
On Tue, May 21, 2013 at 6:41 PM, Gordon Watson gordon.wat...@me.com wrote:
My LyX version is 2.0.5.1; my Mac OSX 10.7.5. I had many problems getting LyX
to work -- sensibly -- for me; and am very nervous with fiddling with the
hit-and-miss additives that now have it working quite well.
UWE and Scott!!
Thanks! It's early days but I've just pasted my 10-page essay into Uwe's
template -- and + fear -- it looks perfect.
I'll get back if it's not OK, but it seems to me that others on my combo -- LyX
version is 2.0.5.1; Mac OSX 10.7.5 -- might find your solution beautiful too.
Am 22.05.2013 00:41, schrieb Gordon Watson:
My problem will be this: How do I track the consequential changes in the whole document
experience after line by line changes?
Just follow what I wrote (in my post with the fixed example file) item by item and remove the stuff
from the preamble
Thanks Uwe; here's what I did:
1. removed the text from your example.
2. pasted my 10-page essay -- from that old cobbled-together preamble -- into
that consequent template.
3. will now spend the day crawling over the output to ensure all is OK.
4. it so far looks great -- except I'm
Am 22.05.2013 01:20, schrieb Gordon Watson:
4. it so far looks great -- except I'm thinking it may be best to change your
lovely pink hyperlinks to blue!
No problem, see the UserGuide, sec 6.9 PDF properties -- just add linkcolor=blue to the
additional options field in the document settings
Thanks a lot to both of you. I tested both of the solutions and they all works
well, at least for me. So I’ll make a summary here so you can help me to post
this into the mail archive to help others
The mtpro2 provides a polished fonts for many magazines, although it’s not
free. However, it
On 20 April 2013 15:51, Csikos Bela bcsikos...@freemail.hu wrote:
Hello:
I have a question regarding bibliography/bibtex databases.
Is there a program or script that can use an existing bibliography database
(format is not important, can be bibtex, RIS, etc.) and fetch all of its
records
Thank you very much!
Now everything is working, but I really would like to have different
fonts... Isn't it possible to use two different fonts in one document? I
don't only need Umlauts, but I also need the transcription, and
Schehrezade and Lateef dont recognize the transcription.
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
Thank.
===
Patrick DUPRÉ
Ah yes that's probably the source. I had forgotten the natbibapa. Oh well
it's not that hard to edit a bib file if needed.
From: Julien Rioux jri...@lyx.org
To: lyx-users@lists.lyx.org
Sent: Monday, May 20, 2013 7:44:11 PM
Subject: Re: APA6 vs APA. APA6
The only soluton that I found is: never use \bm but \boldsymbol !
I would be gret if we could have more control of the header
like deactive a package !
Regards.
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and
On 21/05/2013 11:21 AM, Patrick Dupre wrote:
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
Thank.
On 09/05/2013 1:11 PM, Stephen Brooking wrote:
I've tried the same under Windows (I need this to work with LyX under
Windows), setting an environment variable to point to a path (and
reconfiguring and restarting LyX just in case), and specifying that path as
my \filepath, but I still get the
On 02/05/2013 11:10 AM, Jean-Louis GALLINARI wrote:
I receive this message :
Signal SIGSEGV perçu
and I'm asked to send a bug-report then Lyx crashes when I close the
window by clicking ok
I also did not have any problem exporting to either HTML (with htlatex)
or LyXHTML. Which
On 21/10/2012 2:51 AM, Gabi Kedma wrote:
Hi,
I have the following problem:
I am working with the ACM sigplan class and template.
It requires me to specify both 'General Terms' and 'Keywords'.
The template uses:
\begin_layout Terms
and
\begin_layout Keywords
However, when I convert this to PDF,
On Tue, May 21, 2013 at 12:53 PM, Julien Rioux jri...@lyx.org wrote:
On 21/05/2013 11:21 AM, Patrick Dupre wrote:
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
On 21/05/2013 1:20 PM, Scott Kostyshak wrote:
On Tue, May 21, 2013 at 12:53 PM, Julien Rioux jri...@lyx.org wrote:
In document settings:
Edit the local layout to tell LyX that we are providing bm ourself:
Format 35
Provides bm true
Note that (on 2.1git) LyX gives the following warning:
LyX:
On 28/03/2013 1:58 PM, John Kane wrote:
LyX 2.0.5.1 Ubuntu 12.10
I am trying to import and run a LateX file in LyX. The problem arises
when I have a figure with subfigures. A single figure processes with no
problem.
The file is fine in LaTeX but chokes in Lyx. I have seen a few
references to
Am 21.05.2013 15:02, schrieb Muhammed F. Bayraktar:
Now everything is working, but I really would like to have different fonts...
Isn't it possible to
use two different fonts in one document?
No. This would also be against the common typesetting rules I think. But as I
wrote in the Wiki
Am 21.05.2013 02:01, schrieb Julien Rioux:
On 08/04/2013 2:06 PM, ARNOLD STEPHANE wrote:
I think theTutorial misses a sentence in the 2.2.3 section.
I think it should say that pressing Control-Enter in an adress(in a
Letter document) can perform a linebreak. Somehow it should tell it, I
Julian,
Thanks for the explanation.
From: Julien Rioux jri...@lyx.org
To: lyx-users@lists.lyx.org
Sent: Tuesday, May 21, 2013 1:46:54 PM
Subject: Re: LyX ; look up `weird error' in the index to The TeXbook.)
On 28/03/2013 1:58 PM, John Kane wrote:
LyX
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write an AGU journal article using the AGU document class in
LyX, a front-end to MacTex. I have been able to generate a good looking
manuscript with LyX, with one important caveat: the compiled manuscript fails
to include
On 21/05/2013 2:26 PM, John Kane wrote:
Julian,
Thanks for the explanation.
I've just opened http://www.lyx.org/trac/ticket/8690 for this issue.
Cheers,
Julien
OK,
I found it
Hello,
In lyx 2.0.5, I would like to insert a multline formula
(as documented), but I cannot do it because under insert math
all the first part of the options (until array environment) is
not available.
Do I have a package missing?
I attached my configure.log file.
On 11/05/2012 10:50 AM, Alex Vergara Gil wrote:
Hello LyXers!
I have a system with windows 7 which have previously installed python
2.6 for the use of GIMP, this sofware do use python for a lot of things
so I cannot remove it from the system. I want to install LyX in this
system but when I do
Am 21.05.2013 20:25, schrieb xin guo:
All right. Anyway, I have already finished my paper this time. However, I
am sad, as a lyx fan, that there is a package works in Latex but fails in
LyX. Actually, mtpro2 has been the official font of many IEEE magazines.
Don't give up that quickly. Please
On 20/05/2013 7:54 PM, Uwe Stöhr wrote:
Am 20.05.2013 03:33, schrieb dianzi@gmail.com:
Removing the amssymb is the official solution to the conflict problem
between them. You can see it on the web of mtpro2.
I cannot test this because mtpro2 is not part of MiKTeX and TeXLive
because of
On 20/05/2013 7:54 PM, Uwe Stöhr wrote:
Am 20.05.2013 03:33, schrieb dianzi@gmail.com:
Removing the amssymb is the official solution to the conflict problem
between them. You can see it on the web of mtpro2.
I cannot test this because mtpro2 is not part of MiKTeX and TeXLive
because of
Was the ellipsis the path to the LyX installation directory?
If so, check in your user directory. (I think the path to it
appears in Help About).
Paul
Am 21.05.2013 21:39, schrieb Julien Rioux:
As Paul Rubin commented (if you did not see his reply, concider subscribing to
the list)
I read the list via Gmane.
there is
indeed a way to suppress amssymb. You can use the module that he provided or
directly put the
following in document
On 11/05/2012 10:50 AM, Alex Vergara Gil wrote:
I have a system with windows 7 which have previously installed python
2.6 for the use of GIMP, this sofware do use python for a lot of things
so I cannot remove it from the system. I want to install LyX in this
system but when I do that all goes
Hi Gordon,
This is a question for lyx-users list, not lyx-docs. I'm CC'ing
lyx-users. For questions like this, it's always helpful if you send a
LyX minimal example: http://wiki.lyx.org/FAQ/MinimalExample.
Best,
Scott
On Tue, May 21, 2013 at 6:05 PM, Gordon Watson gordon.wat...@me.com wrote:
Am 21.05.2013 20:30, schrieb Julien Rioux:
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write an AGU journal article using the AGU document class in
LyX, a front-end to
MacTex. I have been able to generate a good looking manuscript with LyX, with
one important
On Tue, May 21, 2013 at 6:21 PM, Gordon Watson gordon.wat...@me.com wrote:
My first footnote from Author-footnote comes with an asterisk. The remainder
are not numbered.
Do I need to change footnote style somewhere? Example attached.
You have a lot of stuff in your example. If you delete
Thanks, but I've moved to a different Latex program already. Your
response may have been more helpful to me six months ago.
Kris
On 05/21/2013 03:22 PM, Uwe Stöhr wrote:
Am 21.05.2013 20:30, schrieb Julien Rioux:
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write
On Tue, May 21, 2013 at 6:34 PM, Kristoffer Walker kwal...@ucsd.edu wrote:
Thanks, but I've moved to a different Latex program already. Your
response may have been more helpful to me six months ago.
Kris
Sorry to hear that. All the best in your endeavours!
Cheers,
Julien
Am 22.05.2013 00:05, schrieb Gordon Watson:
Unlike the LyX Tutorial, my footnotes are not numbering.
You use many preamble code. Do you know what this does? If not, please remove anything you don't
understand. This will only make troubles.
- For example you don't need to use \makeatletter in
Am 22.05.2013 00:34, schrieb Kristoffer Walker:
Thanks, but I've moved to a different Latex program already.
It is never too late to give LyX a second try.
regards Uwe
My LyX version is 2.0.5.1; my Mac OSX 10.7.5. I had many problems getting LyX
to work -- sensibly -- for me; and am very nervous with fiddling with the
hit-and-miss additives that now have it working quite well.
My problem will be this: How do I track the consequential changes in the whole
On Tue, May 21, 2013 at 6:41 PM, Gordon Watson gordon.wat...@me.com wrote:
My LyX version is 2.0.5.1; my Mac OSX 10.7.5. I had many problems getting LyX
to work -- sensibly -- for me; and am very nervous with fiddling with the
hit-and-miss additives that now have it working quite well.
UWE and Scott!!
Thanks! It's early days but I've just pasted my 10-page essay into Uwe's
template -- and + fear -- it looks perfect.
I'll get back if it's not OK, but it seems to me that others on my combo -- LyX
version is 2.0.5.1; Mac OSX 10.7.5 -- might find your solution beautiful too.
Am 22.05.2013 00:41, schrieb Gordon Watson:
My problem will be this: How do I track the consequential changes in the whole document
experience after line by line changes?
Just follow what I wrote (in my post with the fixed example file) item by item and remove the stuff
from the preamble
Thanks Uwe; here's what I did:
1. removed the text from your example.
2. pasted my 10-page essay -- from that old cobbled-together preamble -- into
that consequent template.
3. will now spend the day crawling over the output to ensure all is OK.
4. it so far looks great -- except I'm
Am 22.05.2013 01:20, schrieb Gordon Watson:
4. it so far looks great -- except I'm thinking it may be best to change your
lovely pink hyperlinks to blue!
No problem, see the UserGuide, sec 6.9 PDF properties -- just add linkcolor=blue to the
additional options field in the document settings
Thanks a lot to both of you. I tested both of the solutions and they all works
well, at least for me. So I’ll make a summary here so you can help me to post
this into the mail archive to help others
The mtpro2 provides a polished fonts for many magazines, although it’s not
free. However, it
On 20 April 2013 15:51, Csikos Bela wrote:
> Hello:
>
> I have a question regarding bibliography/bibtex databases.
> Is there a program or script that can use an existing bibliography database
> (format is not important, can be bibtex, RIS, etc.) and fetch all of its
>
Thank you very much!
Now everything is working, but I really would like to have different
fonts... Isn't it possible to use two different fonts in one document? I
don't only need Umlauts, but I also need the transcription, and
Schehrezade and Lateef dont recognize the transcription.
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
Thank.
===
Patrick DUPRÉ
Ah yes that's probably the source. I had forgotten the natbibapa. Oh well
it's not that hard to edit a bib file if needed.
From: Julien Rioux
To: lyx-users@lists.lyx.org
Sent: Monday, May 20, 2013 7:44:11 PM
Subject: Re: APA6 vs APA. APA6
The only soluton that I found is: never use \bm but \boldsymbol !
I would be gret if we could have more control of the header
like deactive a package !
Regards.
>
> Hello,
>
> lyx (2.0.5) make a
> \usepackage{bm} that I am unable to control. Why?
>
> I need to make a
>
On 21/05/2013 11:21 AM, Patrick Dupre wrote:
Hello,
lyx (2.0.5) make a
\usepackage{bm} that I am unable to control. Why?
I need to make a
\usepackage{fourier,bm}
and not
\usepackage{bm,fourier}
How can I do it?
Thank.
On 09/05/2013 1:11 PM, Stephen Brooking wrote:
I've tried the same under Windows (I need this to work with LyX under
Windows), setting an environment variable to point to a path (and
reconfiguring and restarting LyX just in case), and specifying that path as
my \filepath, but I still get the
On 02/05/2013 11:10 AM, Jean-Louis GALLINARI wrote:
I receive this message :
"Signal SIGSEGV perçu"
and I'm asked to send a bug-report then Lyx crashes when I close the
window by clicking "ok"
I also did not have any problem exporting to either HTML (with htlatex)
or LyXHTML. Which
On 21/10/2012 2:51 AM, Gabi Kedma wrote:
Hi,
I have the following problem:
I am working with the ACM sigplan class and template.
It requires me to specify both 'General Terms' and 'Keywords'.
The template uses:
\begin_layout Terms
and
\begin_layout Keywords
However, when I convert this to PDF,
On Tue, May 21, 2013 at 12:53 PM, Julien Rioux wrote:
> On 21/05/2013 11:21 AM, Patrick Dupre wrote:
>>
>> Hello,
>>
>> lyx (2.0.5) make a
>> \usepackage{bm} that I am unable to control. Why?
>>
>> I need to make a
>> \usepackage{fourier,bm}
>> and not
>> \usepackage{bm,fourier}
On 21/05/2013 1:20 PM, Scott Kostyshak wrote:
On Tue, May 21, 2013 at 12:53 PM, Julien Rioux wrote:
In document settings:
Edit the local layout to tell LyX that we are providing bm ourself:
Format 35
Provides bm true
Note that (on 2.1git) LyX gives the following warning:
On 28/03/2013 1:58 PM, John Kane wrote:
LyX 2.0.5.1 Ubuntu 12.10
I am trying to import and run a LateX file in LyX. The problem arises
when I have a figure with subfigures. A single figure processes with no
problem.
The file is fine in LaTeX but chokes in Lyx. I have seen a few
references to
Am 21.05.2013 15:02, schrieb Muhammed F. Bayraktar:
Now everything is working, but I really would like to have different fonts...
Isn't it possible to
use two different fonts in one document?
No. This would also be against the common typesetting rules I think. But as I
wrote in the Wiki
Am 21.05.2013 02:01, schrieb Julien Rioux:
On 08/04/2013 2:06 PM, ARNOLD STEPHANE wrote:
I think theTutorial misses a sentence in the 2.2.3 section.
I think it should say that pressing Control-Enter in an adress(in a
Letter document) can perform a linebreak. Somehow it should tell it, I
Julian,
Thanks for the explanation.
From: Julien Rioux
To: lyx-users@lists.lyx.org
Sent: Tuesday, May 21, 2013 1:46:54 PM
Subject: Re: LyX ; look up `weird error' in the index to The TeXbook.)
On 28/03/2013 1:58 PM, John Kane wrote:
> LyX
On 10/07/2012 7:33 PM, Kristoffer Walker wrote:
Folks,
I am trying to write an AGU journal article using the AGU document class in
LyX, a front-end to MacTex. I have been able to generate a good looking
manuscript with LyX, with one important caveat: the compiled manuscript fails
to include
On 21/05/2013 2:26 PM, John Kane wrote:
Julian,
Thanks for the explanation.
I've just opened http://www.lyx.org/trac/ticket/8690 for this issue.
Cheers,
Julien
OK,
I found it
> Hello,
>
> In lyx 2.0.5, I would like to insert a multline formula
> (as documented), but I cannot do it because under insert > math >
> all the first part of the options (until array environment) is
> not available.
> Do I have a package missing?
> I attached my configure.log
On 11/05/2012 10:50 AM, Alex Vergara Gil wrote:
Hello LyXers!
I have a system with windows 7 which have previously installed python
2.6 for the use of GIMP, this sofware do use python for a lot of things
so I cannot remove it from the system. I want to install LyX in this
system but when I do
Am 21.05.2013 20:25, schrieb xin guo:
All right. Anyway, I have already finished my paper this time. However, I
am sad, as a lyx fan, that there is a package works in Latex but fails in
LyX. Actually, mtpro2 has been the official font of many IEEE magazines.
Don't give up that quickly. Please
On 20/05/2013 7:54 PM, Uwe Stöhr wrote:
Am 20.05.2013 03:33, schrieb dianzi@gmail.com:
Removing the amssymb is the official solution to the conflict problem
between them. You can see it on the web of mtpro2.
I cannot test this because mtpro2 is not part of MiKTeX and TeXLive
because of
On 20/05/2013 7:54 PM, Uwe Stöhr wrote:
Am 20.05.2013 03:33, schrieb dianzi@gmail.com:
Removing the amssymb is the official solution to the conflict problem
between them. You can see it on the web of mtpro2.
I cannot test this because mtpro2 is not part of MiKTeX and TeXLive
because of
1 - 100 of 117 matches
Mail list logo