Hi,
the following paper
Reviewer:Andreas Karlsson
Title: Scientific Workplace 5.5 and LyX 1.4.2
Published: 2006-10-27
Hi,
the following paper
Reviewer:Andreas Karlsson
Title: Scientific Workplace 5.5 and LyX 1.4.2
Published: 2006-10-27
has been published by the Journal of Statistical Software, published
by the American Statistical Association.
It is freely available from:
Dear Lyxers,
I'm trying to finish my CV and I need to write a publication list of type:
Journals
[J-1] .
[J-2] .
Conferences
[C-1]
Dear Lyxers,
I'm trying to finish my CV and I need to write a publication list of type:
Journals
[J-1] .
[J-2] .
Conferences
[C-1]
[C-2]
etc.
Which packages should I use in order to have such local
bibliographies, and to get of the References title generated by
bibtex
Dear all, I need to left-align a paper.
I'm using the paper class.
So far, I could left-align each paragraph separately (layout-paragraph
etc.), but I want to find something smarter.
If I put the instruction \flushleft in the preamble, but this does not
work: it conflicts with tables and figures
hi everyone :))
I'm working with multicolomn tables and i'm not able to get identical
width colomns.
I would to have, below the header in the first row, identical-width
colomns, since the different colomns contain identical-width text.
my file follows..
Thanks a lot, Giorgio
#LyX 1.1 created
Hi everyone.
I would to get a good pdf output from my lyx document.
I've converted postscript with ps2pdf, but it didn't look good (at
least within the acrobat reader), eventhoug it was ok when printed.
Is it possible to get directly the pdf version, without to use ps2pdf?
As far as i know now,
Hi.
I thank you for the useful advices about lyx pdf :)
Yet another question: i would to set smaller fonts for the captions of
tables and figures.
Is it possible?
cheers, Giorgio
hi!
I need to put in my documents some tables, which are larger that the
paper's margin.
Lyx's default policy is, as far as I know, to keep the table aligned
with the left margin, whereas the very right part of table goes outside
the right margin:
---
|
Juergen Vigna wrote:
On 06-Jun-2001 Giorgio Corani wrote:
I would know if it's possible to put the large table in a justified
way, going out of left and right margin.
thanks, Giorgio
Well this is done in the upcoming 1.2.0 version and should be also done
in the 1.1.6 version. But why do you
hi!
I've just updated lyx to the 1.1.6fix1 release.
Although it works fine, I'm experiencing some problems with postscript
preview.
As a matter of fact, when I try to update it, gv continues to display
the same postscript file; moreover, if I close gv and follow the menu
(view-postscript), I
Hi!
I'm trying to use the abstract package in order to manage one column
abstract in a two-column document with Lyx.
I downloaded the abstract package from CTAN and i generated the file
abstract.sty compiling with latex the file abstract.ins; then I copied
abstract.sty in
hi!
I'm writing a document of class article, using the geometry package.
I've defined my custom margins (2cm both left and right); however when I
print the postscript file, right margins are greater than the left ones
on the even pages and viceversa. I think it should be a sort of
inheritance
I've just installed a new style which allows to manage one column
abstracts in a two-columns papers.
Doing that, I've got available the OneColAbstract paragraph style..
which is now at the top of my style-bar, instead of the Standard
entry.
It is quite annoying.
Can i fix that?
thanks, Giorgio
I'm writing a paper, and I need to put at the beginning the abstract
both in italian and in english.
The document layout is AMS article, the schema of paragraph is the
following:
title (italian)
abstract (italian)
authors
title (english)
abstract (english)
body
However, in the postscript
and robustness in neural networks based flood forecasting
\layout Author
\lang english
Giorgio Corani, Giorgio Guariso
\layout Abstract
\lang english
A neural network framework is developed to forecast flood events.
Two different methodologies are exploited in order to guarantee both the
\emph
Manuel Campos Martínez wrote:
I'm writing an article, and the abstract must appear in two lenguages.
I have two questions:
- I can't put the Abstract enviroment twice. Is this posible.
- The word 'Abstract' must appear in Spanish and English within the abstract
enviroment.
I mean:
hi!
I'm using latex font within eps figures through psfrag package.
I read some documentation about that and I've put psfrag to work in my
Lyx document.
It works fine, allowing to use latex font in anyway produced eps files.
However, if I scale the figure, the fonts result scaled too. This is a
I'm writing a paper, using the class article.
The problem I have is that hyphenation works fine on the text, but
doesn't work with citation reference.
In facts, lines which terminate with a citation reference go out of the
right margin.
Can someone help me?
regards, Giorgio
The problem I have is that hyphenation works fine on the text, but
doesn't work with citation reference.
In facts, lines which terminate with a citation reference go out of the
right margin.
Which bibliography style you use ?
DO you use a bibliography package (e.g. harvard,natbib) ?
I
between each other.
Can someone help me?? thanks a lot in advance!!
I attach my lyx source, the provided style, and the provided tex sample.
-Giorgio Corani
iemss.tex
Description: TeX document
iEMSs 2002 Stylesheet.
Copy the iemss.sty file in the main latex file directory
between each other.
Can someone help me?? thanks a lot in advance!!
I attach my lyx source, the provided style, and the provided tex sample.
-Giorgio Corani
iemss.tex
Description: TeX document
iEMSs 2002 Stylesheet.
Copy the iemss.sty file in the main latex file directory
I've already tried it but the problems does not change:(
Christopher M. Jones wrote:
Just a guess: try
\usepackage{iemss}
not
\usepackage{iemss.sty}
Also sprach Giorgio Corani:
Dear all,
i'm writing an english paper for an international conference.
The paper has
Richard Wang wrote:
Hi,
I have some documents which are already typed in Latex with many math
equations in them I want to make these Latex file become Lyx file so I
can work on the remaining of the documents in Lyx The only way I can
imagine is copy the Latex text file and paste them to
Davide Cavallari wrote:
I have 16 figures which show the same thing at 16 different steps So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on
I have opened a figure float and inputted all the 16 *tex files in it
But all are put on
unsubscribe [EMAIL PROTECTED]
Hi,
the following paper
Reviewer:Andreas Karlsson
Title: Scientific Workplace 5.5 and LyX 1.4.2
Published: 2006-10-27
Hi,
the following paper
Reviewer:Andreas Karlsson
Title: Scientific Workplace 5.5 and LyX 1.4.2
Published: 2006-10-27
has been published by the Journal of Statistical Software, published
by the American Statistical Association.
It is freely available from:
Dear Lyxers,
I'm trying to finish my CV and I need to write a publication list of type:
Journals
[J-1] .
[J-2] .
Conferences
[C-1]
Dear Lyxers,
I'm trying to finish my CV and I need to write a publication list of type:
Journals
[J-1] .
[J-2] .
Conferences
[C-1]
[C-2]
etc.
Which packages should I use in order to have such local
bibliographies, and to get of the References title generated by
bibtex
Dear all, I need to left-align a paper.
I'm using the paper class.
So far, I could left-align each paragraph separately (layout-paragraph
etc.), but I want to find something smarter.
If I put the instruction \flushleft in the preamble, but this does not
work: it conflicts with tables and figures
hi everyone :))
I'm working with multicolomn tables and i'm not able to get identical
width colomns.
I would to have, below the header in the first row, identical-width
colomns, since the different colomns contain identical-width text.
my file follows..
Thanks a lot, Giorgio
#LyX 1.1 created
Hi everyone.
I would to get a good pdf output from my lyx document.
I've converted postscript with ps2pdf, but it didn't look good (at
least within the acrobat reader), eventhoug it was ok when printed.
Is it possible to get directly the pdf version, without to use ps2pdf?
As far as i know now,
Hi.
I thank you for the useful advices about lyx pdf :)
Yet another question: i would to set smaller fonts for the captions of
tables and figures.
Is it possible?
cheers, Giorgio
hi!
I need to put in my documents some tables, which are larger that the
paper's margin.
Lyx's default policy is, as far as I know, to keep the table aligned
with the left margin, whereas the very right part of table goes outside
the right margin:
---
|
Juergen Vigna wrote:
On 06-Jun-2001 Giorgio Corani wrote:
I would know if it's possible to put the large table in a justified
way, going out of left and right margin.
thanks, Giorgio
Well this is done in the upcoming 1.2.0 version and should be also done
in the 1.1.6 version. But why do you
hi!
I've just updated lyx to the 1.1.6fix1 release.
Although it works fine, I'm experiencing some problems with postscript
preview.
As a matter of fact, when I try to update it, gv continues to display
the same postscript file; moreover, if I close gv and follow the menu
(view-postscript), I
Hi!
I'm trying to use the abstract package in order to manage one column
abstract in a two-column document with Lyx.
I downloaded the abstract package from CTAN and i generated the file
abstract.sty compiling with latex the file abstract.ins; then I copied
abstract.sty in
hi!
I'm writing a document of class article, using the geometry package.
I've defined my custom margins (2cm both left and right); however when I
print the postscript file, right margins are greater than the left ones
on the even pages and viceversa. I think it should be a sort of
inheritance
I've just installed a new style which allows to manage one column
abstracts in a two-columns papers.
Doing that, I've got available the OneColAbstract paragraph style..
which is now at the top of my style-bar, instead of the Standard
entry.
It is quite annoying.
Can i fix that?
thanks, Giorgio
I'm writing a paper, and I need to put at the beginning the abstract
both in italian and in english.
The document layout is AMS article, the schema of paragraph is the
following:
title (italian)
abstract (italian)
authors
title (english)
abstract (english)
body
However, in the postscript
and robustness in neural networks based flood forecasting
\layout Author
\lang english
Giorgio Corani, Giorgio Guariso
\layout Abstract
\lang english
A neural network framework is developed to forecast flood events.
Two different methodologies are exploited in order to guarantee both the
\emph
Manuel Campos Martínez wrote:
I'm writing an article, and the abstract must appear in two lenguages.
I have two questions:
- I can't put the Abstract enviroment twice. Is this posible.
- The word 'Abstract' must appear in Spanish and English within the abstract
enviroment.
I mean:
hi!
I'm using latex font within eps figures through psfrag package.
I read some documentation about that and I've put psfrag to work in my
Lyx document.
It works fine, allowing to use latex font in anyway produced eps files.
However, if I scale the figure, the fonts result scaled too. This is a
I'm writing a paper, using the class article.
The problem I have is that hyphenation works fine on the text, but
doesn't work with citation reference.
In facts, lines which terminate with a citation reference go out of the
right margin.
Can someone help me?
regards, Giorgio
The problem I have is that hyphenation works fine on the text, but
doesn't work with citation reference.
In facts, lines which terminate with a citation reference go out of the
right margin.
Which bibliography style you use ?
DO you use a bibliography package (e.g. harvard,natbib) ?
I
between each other.
Can someone help me?? thanks a lot in advance!!
I attach my lyx source, the provided style, and the provided tex sample.
-Giorgio Corani
iemss.tex
Description: TeX document
iEMSs 2002 Stylesheet.
Copy the iemss.sty file in the main latex file directory
between each other.
Can someone help me?? thanks a lot in advance!!
I attach my lyx source, the provided style, and the provided tex sample.
-Giorgio Corani
iemss.tex
Description: TeX document
iEMSs 2002 Stylesheet.
Copy the iemss.sty file in the main latex file directory
I've already tried it but the problems does not change:(
Christopher M. Jones wrote:
Just a guess: try
\usepackage{iemss}
not
\usepackage{iemss.sty}
Also sprach Giorgio Corani:
Dear all,
i'm writing an english paper for an international conference.
The paper has
Richard Wang wrote:
Hi,
I have some documents which are already typed in Latex with many math
equations in them I want to make these Latex file become Lyx file so I
can work on the remaining of the documents in Lyx The only way I can
imagine is copy the Latex text file and paste them to
Davide Cavallari wrote:
I have 16 figures which show the same thing at 16 different steps So I
would like to have only one figure with 16 sub-figures labeled with (a),
(b), (c), and so on
I have opened a figure float and inputted all the 16 *tex files in it
But all are put on
unsubscribe [EMAIL PROTECTED]
Hi,
the following paper
Reviewer:Andreas Karlsson
Title: Scientific Workplace 5.5 and LyX 1.4.2
Published: 2006-10-27
Hi,
the following paper
Reviewer:Andreas Karlsson
Title: Scientific Workplace 5.5 and LyX 1.4.2
Published: 2006-10-27
has been published by the Journal of Statistical Software, published
by the American Statistical Association.
It is freely available from:
Dear Lyxers,
I'm trying to finish my CV and I need to write a publication list of type:
Journals
[J-1] .
[J-2] .
Conferences
[C-1]
Dear Lyxers,
I'm trying to finish my CV and I need to write a publication list of type:
Journals
[J-1] .
[J-2] .
Conferences
[C-1]
[C-2]
etc.
Which packages should I use in order to have such "local"
bibliographies, and to get of the "References" title generated by
bibtex
Dear all, I need to left-align a paper.
I'm using the paper class.
So far, I could left-align each paragraph separately (layout->paragraph
etc.), but I want to find something smarter.
If I put the instruction \flushleft in the preamble, but this does not
work: it conflicts with tables and figures
hi everyone :))
I'm working with multicolomn tables and i'm not able to get identical
width colomns.
I would to have, below the header in the first row, identical-width
colomns, since the different colomns contain identical-width text.
my file follows..
Thanks a lot, Giorgio
#LyX 1.1 created
Hi everyone.
I would to get a good pdf output from my lyx document.
I've converted postscript with ps2pdf, but it didn't look good (at
least within the acrobat reader), eventhoug it was ok when printed.
Is it possible to get directly the pdf version, without to use ps2pdf?
As far as i know now,
Hi.
I thank you for the useful advices about lyx & pdf :)
Yet another question: i would to set smaller fonts for the captions of
tables and figures.
Is it possible?
cheers, Giorgio
hi!
I need to put in my documents some tables, which are larger that the
paper's margin.
Lyx's default policy is, as far as I know, to keep the table aligned
with the left margin, whereas the very right part of table goes outside
the right margin:
---
|
Juergen Vigna wrote:
>On 06-Jun-2001 Giorgio Corani wrote:
>
>>I would know if it's possible to put the large table in a "justified"
>>way, going out of left and right margin.
>>thanks, Giorgio
>>
>
>Well this is done in the upcoming 1.2.0 version
hi!
I've just updated lyx to the 1.1.6fix1 release.
Although it works fine, I'm experiencing some problems with postscript
preview.
As a matter of fact, when I try to update it, gv continues to display
the same postscript file; moreover, if I close gv and follow the menu
(view->postscript), I
Hi!
I'm trying to use the abstract package in order to manage one column
abstract in a two-column document with Lyx.
I downloaded the abstract package from CTAN and i generated the file
abstract.sty compiling with latex the file abstract.ins; then I copied
abstract.sty in
hi!
I'm writing a document of class article, using the geometry package.
I've defined my custom margins (2cm both left and right); however when I
print the postscript file, right margins are greater than the left ones
on the even pages and viceversa. I think it should be a sort of
I've just installed a new style which allows to manage one column
abstracts in a two-columns papers.
Doing that, I've got available the OneColAbstract paragraph style..
which is now at the top of my style-bar, instead of the "Standard"
entry.
It is quite annoying.
Can i fix that?
thanks, Giorgio
I'm writing a paper, and I need to put at the beginning the abstract
both in italian and in english.
The document layout is AMS article, the schema of paragraph is the
following:
title (italian)
abstract (italian)
authors
title (english)
abstract (english)
body
However, in the postscript
\layout Title
\lang english
Efficiency and robustness in neural networks based flood forecasting
\layout Author
\lang english
Giorgio Corani, Giorgio Guariso
\layout Abstract
\lang english
A neural network framework is developed to forecast flood events.
Two different methodologies are exploi
"Manuel Campos Martínez" wrote:
>
> I'm writing an article, and the abstract must appear in two lenguages.
>
> I have two questions:
> - I can't put the Abstract enviroment twice. Is this posible.
> - The word 'Abstract' must appear in Spanish and English within the abstract
>enviroment.
>
hi!
I'm using latex font within eps figures through psfrag package.
I read some documentation about that and I've put psfrag to work in my
Lyx document.
It works fine, allowing to use latex font in anyway produced eps files.
However, if I scale the figure, the fonts result scaled too. This is a
I'm writing a paper, using the class "article".
The problem I have is that hyphenation works fine on the text, but
doesn't work with citation reference.
In facts, lines which terminate with a citation reference go out of the
right margin.
Can someone help me?
regards, Giorgio
>>The problem I have is that hyphenation works fine on the text, but
>>doesn't work with citation reference.
>>In facts, lines which terminate with a citation reference go out of the
>>right margin.
> Which bibliography style you use ?
> DO you use a bibliography package (e.g. harvard,natbib)
between paragraphs, I get a medskip
between each other.
Can someone help me?? thanks a lot in advance!!
I attach my lyx source, the provided style, and the provided tex sample.
-Giorgio Corani
iemss.tex
Description: TeX document
iEMSs 2002 Stylesheet.
Copy the iemss.sty file in the
between paragraphs, I get a medskip
between each other.
Can someone help me?? thanks a lot in advance!!
I attach my lyx source, the provided style, and the provided tex sample.
-Giorgio Corani
iemss.tex
Description: TeX document
iEMSs 2002 Stylesheet.
Copy the iemss.sty file in the
I've already tried it but the problems does not change:(
"Christopher M. Jones" wrote:
>
> Just a guess: try
> \usepackage{iemss}
> not
> \usepackage{iemss.sty}
>
> Also sprach Giorgio Corani:
> > Dear all,
> > i'm writing an english paper for
Richard Wang wrote:
>
> Hi,
>
> I have some documents which are already typed in Latex with many math
> equations in them. I want to make these Latex file become Lyx file so I
> can work on the remaining of the documents in Lyx. The only way I can
> imagine is copy the Latex text file and
Davide Cavallari wrote:
>
> I have 16 figures which show the same thing at 16 different steps. So I
> would like to have only one figure with 16 sub-figures labeled with (a),
> (b), (c), and so on.
>
> I have opened a figure float and inputted all the 16 *.tex files in it.
> But all
unsubscribe [EMAIL PROTECTED]
81 matches
Mail list logo