Re: lyx 1.4.3 RPM for Mandriva 2006.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Rudi : Don't work. I have installed it, without error, but don't start. I have make the command lyx -dbg 2 and that is the log : lyxrc.dist Not found Preferences Not found Encodings Not found Languages Not found Reading layouts ... here stop. Someone idea Thanks advanced Miguel Rudi Gaelzer escribió: Well, finally the package is off: ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-1_qt_mdv2006.i586.rpm Try install it and then let me know whether you were successful or not. Bye. On Wednesday 11 October 2006 05:06, you wrote: Hello Rudi : I need the rpm, to my Mandriva 2006. I work now with the 1.3.7 version. How can you send me it ? Thanks advanced Miguel Rudi Gaelzer escribió: Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFNNf4yFpgM/szBZQRAmS4AKCCKbAsCo8/Je2Reg5glb8kKMdMyACfSjk2 2FW2HCGDGaCOORqy0IHXWis= =1Va6 -END PGP SIGNATURE-
Re: lyx 1.4.3 RPM for Mandriva 2006.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 When installed libqt3-devel, have more dependences : libmng-devel, liblcms-devel, libadudio-devel and so, and so .. to infinite. I have download and installed some packages and say me : failed dependences : need libmng-devel, liblcms-devel and so . It's impossible Someone idea Rudi ? Thanks Miguel Rudi Gaelzer escribió: On Tuesday 17 October 2006 04:26, you wrote: Two question : 1. In your system you have installed the package qt3-devel ? The development library I installed to compile the lyx source is: libqt3-devel-3.3.4-23mdk 2. Your Mandriva is commercial or free download ? Free download. Any success? Thanks Miguel Never seen this before. Have no idea where to start looking... How did you install it? Was it an upgrade or a fresh install? I'd recommend you do a fresh install: rpm -qa | grep lyx copy the full name and then: rpm -e full name (removes whatever lyx you have) rpm -ivh full package name I'd also recommend that you move your local .lyx directory somewhere else (to save it) and start lyx. This forces lyx to create a new local configuration. I didn't do this at first and then I got the old 1.3.7 layout. When I forced a new local configuration, I got the beautiful 1.4.3 layout, with several additional menu items... If this doesn't work, I'd recommend you send the errors to the list, where someone can have a clue on what to do... The package worked all right in my laptop, but it was compiled there, anyway. This is the very first time I concocted a rpm package... Cheer up! On Monday 16 October 2006 06:05, you wrote: Hello Rudi : Don't work. I have installed it, without error, but don't start. I have make the command lyx -dbg 2 and that is the log : lyxrc.dist Not found Preferences Not found Encodings Not found Languages Not found Reading layouts ... and stop. Someone idea Thanks advanced Miguel Rudi Gaelzer escribió: Well, finally the package is off: ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-1_qt_mdv2006.i586.rpm Try install it and then let me know whether you were successful or not. Bye. On Wednesday 11 October 2006 05:06, you wrote: Hello Rudi : I need the rpm, to my Mandriva 2006. I work now with the 1.3.7 version. How can you send me it ? Thanks advanced Miguel Rudi Gaelzer escribió: Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFNOWwyFpgM/szBZQRAiCmAKCE1bhJGaScHRLcXHFycqrPvY50KQCgk0Rl IkACjMtMATrEInIV1vCeZBs= =4jwf -END PGP SIGNATURE-
Re: lyx 1.4.3 RPM for Mandriva 2006.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Rudi : Don't work. I have installed it, without error, but don't start. I have make the command lyx -dbg 2 and that is the log : lyxrc.dist Not found Preferences Not found Encodings Not found Languages Not found Reading layouts ... here stop. Someone idea Thanks advanced Miguel Rudi Gaelzer escribió: Well, finally the package is off: ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-1_qt_mdv2006.i586.rpm Try install it and then let me know whether you were successful or not. Bye. On Wednesday 11 October 2006 05:06, you wrote: Hello Rudi : I need the rpm, to my Mandriva 2006. I work now with the 1.3.7 version. How can you send me it ? Thanks advanced Miguel Rudi Gaelzer escribió: Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFNNf4yFpgM/szBZQRAmS4AKCCKbAsCo8/Je2Reg5glb8kKMdMyACfSjk2 2FW2HCGDGaCOORqy0IHXWis= =1Va6 -END PGP SIGNATURE-
Re: lyx 1.4.3 RPM for Mandriva 2006.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 When installed libqt3-devel, have more dependences : libmng-devel, liblcms-devel, libadudio-devel and so, and so .. to infinite. I have download and installed some packages and say me : failed dependences : need libmng-devel, liblcms-devel and so . It's impossible Someone idea Rudi ? Thanks Miguel Rudi Gaelzer escribió: On Tuesday 17 October 2006 04:26, you wrote: Two question : 1. In your system you have installed the package qt3-devel ? The development library I installed to compile the lyx source is: libqt3-devel-3.3.4-23mdk 2. Your Mandriva is commercial or free download ? Free download. Any success? Thanks Miguel Never seen this before. Have no idea where to start looking... How did you install it? Was it an upgrade or a fresh install? I'd recommend you do a fresh install: rpm -qa | grep lyx copy the full name and then: rpm -e full name (removes whatever lyx you have) rpm -ivh full package name I'd also recommend that you move your local .lyx directory somewhere else (to save it) and start lyx. This forces lyx to create a new local configuration. I didn't do this at first and then I got the old 1.3.7 layout. When I forced a new local configuration, I got the beautiful 1.4.3 layout, with several additional menu items... If this doesn't work, I'd recommend you send the errors to the list, where someone can have a clue on what to do... The package worked all right in my laptop, but it was compiled there, anyway. This is the very first time I concocted a rpm package... Cheer up! On Monday 16 October 2006 06:05, you wrote: Hello Rudi : Don't work. I have installed it, without error, but don't start. I have make the command lyx -dbg 2 and that is the log : lyxrc.dist Not found Preferences Not found Encodings Not found Languages Not found Reading layouts ... and stop. Someone idea Thanks advanced Miguel Rudi Gaelzer escribió: Well, finally the package is off: ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-1_qt_mdv2006.i586.rpm Try install it and then let me know whether you were successful or not. Bye. On Wednesday 11 October 2006 05:06, you wrote: Hello Rudi : I need the rpm, to my Mandriva 2006. I work now with the 1.3.7 version. How can you send me it ? Thanks advanced Miguel Rudi Gaelzer escribió: Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFNOWwyFpgM/szBZQRAiCmAKCE1bhJGaScHRLcXHFycqrPvY50KQCgk0Rl IkACjMtMATrEInIV1vCeZBs= =4jwf -END PGP SIGNATURE-
Re: lyx 1.4.3 RPM for Mandriva 2006.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Rudi : Don't work. I have installed it, without error, but don't start. I have make the command lyx -dbg 2 and that is the log : lyxrc.dist Not found Preferences Not found Encodings Not found Languages Not found Reading layouts ... here stop. Someone idea Thanks advanced Miguel Rudi Gaelzer escribió: > Well, finally the package is off: > > ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-1_qt_mdv2006.i586.rpm > > Try install it and then let me know whether you were successful or not. > > Bye. > > On Wednesday 11 October 2006 05:06, you wrote: > >> Hello Rudi : >> >> I need the rpm, to my Mandriva 2006. I work now with the 1.3.7 version. >> How can you send me it ? >> >> Thanks advanced >> >> Miguel >> >> Rudi Gaelzer escribió: >> >>> Hi. >>> I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE >>> 2006. I followed the guidelines originally posted by Paul Smith and >>> Christian Ridderström in: >>> >>> http://wiki.lyx.org/LyX/LyXOnRedHat >>> >>> It is not a terribly well-organized rpm package, but it looks like it >>> installed in my MDV2006 box all right. >>> >>> If anyone is interested, I could distribute the package, but I think I >>> have no permission to transfer it to any standard lyx mirror... >>> > > -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFNNf4yFpgM/szBZQRAmS4AKCCKbAsCo8/Je2Reg5glb8kKMdMyACfSjk2 2FW2HCGDGaCOORqy0IHXWis= =1Va6 -END PGP SIGNATURE-
Re: lyx 1.4.3 RPM for Mandriva 2006.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 When installed libqt3-devel, have more dependences : libmng-devel, liblcms-devel, libadudio-devel and so, and so .. to infinite. I have download and installed some packages and say me : failed dependences : need libmng-devel, liblcms-devel and so . It's impossible Someone idea Rudi ? Thanks Miguel Rudi Gaelzer escribió: > On Tuesday 17 October 2006 04:26, you wrote: > >> Two question : >> 1. In your system you have installed the package qt3-devel ? >> > The development library I installed to compile the lyx source is: > libqt3-devel-3.3.4-23mdk > > >> 2. Your Mandriva is commercial or free download ? >> > Free download. > > Any success? > > >> Thanks >> Miguel >> >> >>> Never seen this before. Have no idea where to start looking... >>> >>> How did you install it? Was it an upgrade or a fresh install? I'd >>> recommend you do a fresh install: >>> >>> rpm -qa | grep lyx >>> copy the full name and then: >>> rpm -e (removes whatever lyx you have) >>> rpm -ivh >>> >>> I'd also recommend that you move your local .lyx directory somewhere else >>> (to save it) and start lyx. This forces lyx to create a new local >>> configuration. I didn't do this at first and then I got the old 1.3.7 >>> layout. When I forced a new local configuration, I got the beautiful >>> 1.4.3 layout, with several additional menu items... >>> >>> If this doesn't work, I'd recommend you send the errors to the list, >>> where someone can have a clue on what to do... >>> >>> The package worked all right in my laptop, but it was compiled there, >>> anyway. This is the very first time I concocted a rpm package... >>> >>> Cheer up! >>> >>> On Monday 16 October 2006 06:05, you wrote: >>> Hello Rudi : Don't work. I have installed it, without error, but don't start. I have make the command lyx -dbg 2 and that is the log : lyxrc.dist Not found Preferences Not found Encodings Not found Languages Not found Reading layouts ... and stop. Someone idea Thanks advanced Miguel Rudi Gaelzer escribió: > Well, finally the package is off: > > ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-1_qt_mdv2006.i586.rpm > > Try install it and then let me know whether you were successful or not. > > Bye. > > On Wednesday 11 October 2006 05:06, you wrote: > >> Hello Rudi : >> >> I need the rpm, to my Mandriva 2006. I work now with the 1.3.7 >> version. How can you send me it ? >> >> Thanks advanced >> >> Miguel >> >> Rudi Gaelzer escribió: >> >>> Hi. >>> I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE >>> 2006. I followed the guidelines originally posted by Paul Smith and >>> Christian Ridderström in: >>> >>> http://wiki.lyx.org/LyX/LyXOnRedHat >>> >>> It is not a terribly well-organized rpm package, but it looks like it >>> installed in my MDV2006 box all right. >>> >>> If anyone is interested, I could distribute the package, but I think >>> I have no permission to transfer it to any standard lyx mirror... >>> > > -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFNOWwyFpgM/szBZQRAiCmAKCE1bhJGaScHRLcXHFycqrPvY50KQCgk0Rl IkACjMtMATrEInIV1vCeZBs= =4jwf -END PGP SIGNATURE-
Re: lyx 1.4.3 RPM for Mandriva 2006.
Georg == Georg Baum [EMAIL PROTECTED] writes: Georg Rudi Gaelzer wrote: I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: Georg I did not know that you used checkinstall. I just corrected the Georg wiki page, because checkinstall builds suboptimal packages. Georg They should not be distributed IMHO. If you use the rpm spec Georg file that is inside the source archive then you get better Georg dependencies. Rudi, are you able to make a new rpm from our lyx.spec file? JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
Hi, Jean-Marc. I created a new rpm from Georg's intructions. Its name is: lyx-1.4.3-1_qt_mdv2006.i586.rpm I uploaded it to ftp.devel.lyx.org/pub/incoming. The ftp client reported a successful transfer, but I could not get the directory listing to confirm. Could you please verify for me? Thank you. On Friday 13 October 2006 11:04, you wrote: Georg == Georg Baum [EMAIL PROTECTED] writes: Georg I did not know that you used checkinstall. I just corrected the Georg wiki page, because checkinstall builds suboptimal packages. Georg They should not be distributed IMHO. If you use the rpm spec Georg file that is inside the source archive then you get better Georg dependencies. Rudi, are you able to make a new rpm from our lyx.spec file? JMarc -- Rudi Gaelzer Departamento de Física Instituto de Física e Matemática Fundação Universidade Federal de Pelotas Caixa Postal 354 - Campus UFPel 96010-900 Pelotas - RS Fone: (53) 3275-7416 FAX: (53) 3275-7343 Usuário de Linux registrado # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi == Rudi Gaelzer [EMAIL PROTECTED] writes: Rudi Hi, Jean-Marc. I created a new rpm from Georg's intructions. Its Rudi name is: lyx-1.4.3-1_qt_mdv2006.i586.rpm Very good. Rudi I uploaded it to ftp.devel.lyx.org/pub/incoming. The ftp client Rudi reported a successful transfer, but I could not get the Rudi directory listing to confirm. Rudi Could you please verify for me? Thank you. I got the file, but it seems truncated: lftp [EMAIL PROTECTED]:/home/ftp/pub/incoming dir -rw-rw1 14 2002 2264056 Oct 12 23:58 lyx-1.4.3-1_qt_mdv2006.i586.rpm . Rpm says that the MD5 is wrong. Could you check that? JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
Georg == Georg Baum [EMAIL PROTECTED] writes: Georg Rudi Gaelzer wrote: I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: Georg I did not know that you used checkinstall. I just corrected the Georg wiki page, because checkinstall builds suboptimal packages. Georg They should not be distributed IMHO. If you use the rpm spec Georg file that is inside the source archive then you get better Georg dependencies. Rudi, are you able to make a new rpm from our lyx.spec file? JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
Hi, Jean-Marc. I created a new rpm from Georg's intructions. Its name is: lyx-1.4.3-1_qt_mdv2006.i586.rpm I uploaded it to ftp.devel.lyx.org/pub/incoming. The ftp client reported a successful transfer, but I could not get the directory listing to confirm. Could you please verify for me? Thank you. On Friday 13 October 2006 11:04, you wrote: Georg == Georg Baum [EMAIL PROTECTED] writes: Georg I did not know that you used checkinstall. I just corrected the Georg wiki page, because checkinstall builds suboptimal packages. Georg They should not be distributed IMHO. If you use the rpm spec Georg file that is inside the source archive then you get better Georg dependencies. Rudi, are you able to make a new rpm from our lyx.spec file? JMarc -- Rudi Gaelzer Departamento de Física Instituto de Física e Matemática Fundação Universidade Federal de Pelotas Caixa Postal 354 - Campus UFPel 96010-900 Pelotas - RS Fone: (53) 3275-7416 FAX: (53) 3275-7343 Usuário de Linux registrado # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi == Rudi Gaelzer [EMAIL PROTECTED] writes: Rudi Hi, Jean-Marc. I created a new rpm from Georg's intructions. Its Rudi name is: lyx-1.4.3-1_qt_mdv2006.i586.rpm Very good. Rudi I uploaded it to ftp.devel.lyx.org/pub/incoming. The ftp client Rudi reported a successful transfer, but I could not get the Rudi directory listing to confirm. Rudi Could you please verify for me? Thank you. I got the file, but it seems truncated: lftp [EMAIL PROTECTED]:/home/ftp/pub/incoming dir -rw-rw1 14 2002 2264056 Oct 12 23:58 lyx-1.4.3-1_qt_mdv2006.i586.rpm . Rpm says that the MD5 is wrong. Could you check that? JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
> "Georg" == Georg Baum <[EMAIL PROTECTED]> writes: Georg> Rudi Gaelzer wrote: >> I just don't know if I got the requires list quite right. As per >> instructions, I ran checkinstall with no extra options. On the man >> page, I noticed that you can include extra requirements to the >> final rpm package, but I did not do that. Here's the list from: Georg> I did not know that you used checkinstall. I just corrected the Georg> wiki page, because checkinstall builds suboptimal packages. Georg> They should not be distributed IMHO. If you use the rpm spec Georg> file that is inside the source archive then you get better Georg> dependencies. Rudi, are you able to make a new rpm from our lyx.spec file? JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
Hi, Jean-Marc. I created a new rpm from Georg's intructions. Its name is: lyx-1.4.3-1_qt_mdv2006.i586.rpm I uploaded it to ftp.devel.lyx.org/pub/incoming. The ftp client reported a successful transfer, but I could not get the directory listing to confirm. Could you please verify for me? Thank you. On Friday 13 October 2006 11:04, you wrote: > > "Georg" == Georg Baum <[EMAIL PROTECTED]> writes: > Georg> I did not know that you used checkinstall. I just corrected the > Georg> wiki page, because checkinstall builds suboptimal packages. > Georg> They should not be distributed IMHO. If you use the rpm spec > Georg> file that is inside the source archive then you get better > Georg> dependencies. > > Rudi, are you able to make a new rpm from our lyx.spec file? > > JMarc -- Rudi Gaelzer Departamento de Física Instituto de Física e Matemática Fundação Universidade Federal de Pelotas Caixa Postal 354 - Campus UFPel 96010-900 Pelotas - RS Fone: (53) 3275-7416 FAX: (53) 3275-7343 Usuário de Linux registrado # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
> "Rudi" == Rudi Gaelzer <[EMAIL PROTECTED]> writes: Rudi> Hi, Jean-Marc. I created a new rpm from Georg's intructions. Its Rudi> name is: lyx-1.4.3-1_qt_mdv2006.i586.rpm Very good. Rudi> I uploaded it to ftp.devel.lyx.org/pub/incoming. The ftp client Rudi> reported a successful transfer, but I could not get the Rudi> directory listing to confirm. Rudi> Could you please verify for me? Thank you. I got the file, but it seems truncated: lftp [EMAIL PROTECTED]:/home/ftp/pub/incoming> dir -rw-rw1 14 2002 2264056 Oct 12 23:58 lyx-1.4.3-1_qt_mdv2006.i586.rpm . Rpm says that the MD5 is wrong. Could you check that? JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
Hi, Christian. On Wednesday 11 October 2006 17:03, [EMAIL PROTECTED] wrote: Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian I think that 'LyX on RPM-based Linux' or something like: 'Compiling LyX on RPM-based linux' is a good choice, since there are several distros based on rpm nowadays. I think someone else replied out how you do to upload it. Yep! -- Rudi Gaelzer Departament of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Thanks, Georg. On Wednesday 11 October 2006 12:15, Georg Baum wrote: If your package was built from clean sources and it is useful for a wider audience, i.e. it does not require anything that is not part of your distro, then it would be a good idea to put it on the LyX ftp server. If you want to do that, upload it to ftp.devel.lyx.org/pub/incoming, and tell Jean-Marc that he can move it to the final place (the devel in the address above is important). I think it's safe to say that the answers to both your questions is yes. I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: rpm -qpR lyx-1.4.3-1mdvLE2006_qt.i586.rpm --- /bin/sh rpmlib(PayloadFilesHavePrefix) = 4.0-1 rpmlib(CompressedFileNames) = 3.0.4-1 coreutils python-base libaudio.so.2 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libdl.so.2 libexpat.so.0 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libICE.so.6 libjpeg.so.62 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libqt-mt.so.3 libSM.so.6 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) libX11.so.6 libXcursor.so.1 libXext.so.6 libXft.so.2 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXt.so.6 libz.so.1 --- As you can see, tetex, Aiksaurus and other packages are left out. I don't know if this is a big deal or not... I just uploaded the package to ftp.devel.lyx.org/pub/incoming -- Rudi Gaelzer Departament of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi == Rudi Gaelzer [EMAIL PROTECTED] writes: Rudi I think it's safe to say that the answers to both your questions Rudi is yes. Rudi I just don't know if I got the requires list quite right. As per Rudi instructions, I ran checkinstall with no extra options. On the Rudi man page, I noticed that you can include extra requirements to Rudi the final rpm package, but I did not do that. Here's the list Rudi from: rpm -qpR lyx-1.4.3-1mdvLE2006_qt.i586.rpm What does the LE stand for? Only 2005 was a LE version (because they rushed it out, IIRC). JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thursday 12 October 2006 11:51, Jean-Marc Lasgouttes wrote: Rudi == Rudi Gaelzer [EMAIL PROTECTED] writes: What does the LE stand for? Only 2005 was a LE version (because they rushed it out, IIRC). Really? I didn't pay attention to that... My bad, sorry... perhaps you should remove LE from the package name... JMarc -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: I did not know that you used checkinstall. I just corrected the wiki page, because checkinstall builds suboptimal packages. They should not be distributed IMHO. If you use the rpm spec file that is inside the source archive then you get better dependencies. Georg
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thu, 12 Oct 2006, Rudi Gaelzer wrote: Hi, Christian. On Wednesday 11 October 2006 17:03, [EMAIL PROTECTED] wrote: Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian I think that 'LyX on RPM-based Linux' or something like: 'Compiling LyX on RPM-based linux' is a good choice, since there are several distros based on rpm nowadays. I've moved the content to this page http://wiki.lyx.org/LyX/CreatingLyXRPM and also linked to it from this page http://wiki.lyx.org/LyX/LyXOnLinux and made a note that the information has been moved from the page in question, i.e. this page http://wiki.lyx.org/LyX/LyXOnRedHat /Christian -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thursday 12 October 2006 12:05, Georg Baum wrote: I did not know that you used checkinstall. I just corrected the wiki page, because checkinstall builds suboptimal packages. They should not be distributed IMHO. If you use the rpm spec file that is inside the source archive then you get better dependencies. Georg Ok. I recompiled using Georg's new instructions on the wiki page. The only difference is that I had to save a copy of lyx.spec on /usr/src/RPM/SPECS and a copy of lyx.xpm on /usr/src/RPM/SOURCES. The package name is now: lyx-1.4.3-1_qt_mdv2006.i586.rpm but the requires list seems to be exactly the same: -- rpm -qpR lyx-1.4.3-1_qt_mdv2006.i586.rpm /bin/sh /bin/sh rpmlib(PayloadFilesHavePrefix) = 4.0-1 rpmlib(CompressedFileNames) = 3.0.4-1 coreutils python-base libaudio.so.2 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libdl.so.2 libexpat.so.0 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libICE.so.6 libjpeg.so.62 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libqt-mt.so.3 libSM.so.6 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) libX11.so.6 libXcursor.so.1 libXext.so.6 libXft.so.2 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXt.so.6 libz.so.1 Jean-Marc: Could you please remove the previous file and substitute for the new one? Thank you. -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Hi, Christian. On Wednesday 11 October 2006 17:03, [EMAIL PROTECTED] wrote: Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian I think that 'LyX on RPM-based Linux' or something like: 'Compiling LyX on RPM-based linux' is a good choice, since there are several distros based on rpm nowadays. I think someone else replied out how you do to upload it. Yep! -- Rudi Gaelzer Departament of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Thanks, Georg. On Wednesday 11 October 2006 12:15, Georg Baum wrote: If your package was built from clean sources and it is useful for a wider audience, i.e. it does not require anything that is not part of your distro, then it would be a good idea to put it on the LyX ftp server. If you want to do that, upload it to ftp.devel.lyx.org/pub/incoming, and tell Jean-Marc that he can move it to the final place (the devel in the address above is important). I think it's safe to say that the answers to both your questions is yes. I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: rpm -qpR lyx-1.4.3-1mdvLE2006_qt.i586.rpm --- /bin/sh rpmlib(PayloadFilesHavePrefix) = 4.0-1 rpmlib(CompressedFileNames) = 3.0.4-1 coreutils python-base libaudio.so.2 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libdl.so.2 libexpat.so.0 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libICE.so.6 libjpeg.so.62 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libqt-mt.so.3 libSM.so.6 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) libX11.so.6 libXcursor.so.1 libXext.so.6 libXft.so.2 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXt.so.6 libz.so.1 --- As you can see, tetex, Aiksaurus and other packages are left out. I don't know if this is a big deal or not... I just uploaded the package to ftp.devel.lyx.org/pub/incoming -- Rudi Gaelzer Departament of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi == Rudi Gaelzer [EMAIL PROTECTED] writes: Rudi I think it's safe to say that the answers to both your questions Rudi is yes. Rudi I just don't know if I got the requires list quite right. As per Rudi instructions, I ran checkinstall with no extra options. On the Rudi man page, I noticed that you can include extra requirements to Rudi the final rpm package, but I did not do that. Here's the list Rudi from: rpm -qpR lyx-1.4.3-1mdvLE2006_qt.i586.rpm What does the LE stand for? Only 2005 was a LE version (because they rushed it out, IIRC). JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thursday 12 October 2006 11:51, Jean-Marc Lasgouttes wrote: Rudi == Rudi Gaelzer [EMAIL PROTECTED] writes: What does the LE stand for? Only 2005 was a LE version (because they rushed it out, IIRC). Really? I didn't pay attention to that... My bad, sorry... perhaps you should remove LE from the package name... JMarc -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: I did not know that you used checkinstall. I just corrected the wiki page, because checkinstall builds suboptimal packages. They should not be distributed IMHO. If you use the rpm spec file that is inside the source archive then you get better dependencies. Georg
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thu, 12 Oct 2006, Rudi Gaelzer wrote: Hi, Christian. On Wednesday 11 October 2006 17:03, [EMAIL PROTECTED] wrote: Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian I think that 'LyX on RPM-based Linux' or something like: 'Compiling LyX on RPM-based linux' is a good choice, since there are several distros based on rpm nowadays. I've moved the content to this page http://wiki.lyx.org/LyX/CreatingLyXRPM and also linked to it from this page http://wiki.lyx.org/LyX/LyXOnLinux and made a note that the information has been moved from the page in question, i.e. this page http://wiki.lyx.org/LyX/LyXOnRedHat /Christian -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thursday 12 October 2006 12:05, Georg Baum wrote: I did not know that you used checkinstall. I just corrected the wiki page, because checkinstall builds suboptimal packages. They should not be distributed IMHO. If you use the rpm spec file that is inside the source archive then you get better dependencies. Georg Ok. I recompiled using Georg's new instructions on the wiki page. The only difference is that I had to save a copy of lyx.spec on /usr/src/RPM/SPECS and a copy of lyx.xpm on /usr/src/RPM/SOURCES. The package name is now: lyx-1.4.3-1_qt_mdv2006.i586.rpm but the requires list seems to be exactly the same: -- rpm -qpR lyx-1.4.3-1_qt_mdv2006.i586.rpm /bin/sh /bin/sh rpmlib(PayloadFilesHavePrefix) = 4.0-1 rpmlib(CompressedFileNames) = 3.0.4-1 coreutils python-base libaudio.so.2 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libdl.so.2 libexpat.so.0 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libICE.so.6 libjpeg.so.62 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libqt-mt.so.3 libSM.so.6 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) libX11.so.6 libXcursor.so.1 libXext.so.6 libXft.so.2 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXt.so.6 libz.so.1 Jean-Marc: Could you please remove the previous file and substitute for the new one? Thank you. -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Hi, Christian. On Wednesday 11 October 2006 17:03, [EMAIL PROTECTED] wrote: > Ok, so we'll keep the page. I didn't quite understand if you wanted to > keep the name of the page, or thought it was ok to rename it to 'LyX on > RPM-based Linux'? (Or if you have another suggestion for the name of the > page). > > cheers > /Christian I think that 'LyX on RPM-based Linux' or something like: 'Compiling LyX on RPM-based linux' is a good choice, since there are several distros based on rpm nowadays. > > I think someone else replied out how you do to upload it. Yep! -- Rudi Gaelzer Departament of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Thanks, Georg. On Wednesday 11 October 2006 12:15, Georg Baum wrote: > If your package was built from clean sources and it is useful for a wider > audience, i.e. it does not require anything that is not part of your > distro, then it would be a good idea to put it on the LyX ftp server. If > you want to do that, upload it to ftp.devel.lyx.org/pub/incoming, and tell > Jean-Marc that he can move it to the final place (the devel in the address > above is important). I think it's safe to say that the answers to both your questions is yes. I just don't know if I got the requires list quite right. As per instructions, I ran checkinstall with no extra options. On the man page, I noticed that you can include extra requirements to the final rpm package, but I did not do that. Here's the list from: rpm -qpR lyx-1.4.3-1mdvLE2006_qt.i586.rpm --- /bin/sh rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 coreutils python-base libaudio.so.2 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libdl.so.2 libexpat.so.0 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libICE.so.6 libjpeg.so.62 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libqt-mt.so.3 libSM.so.6 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) libX11.so.6 libXcursor.so.1 libXext.so.6 libXft.so.2 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXt.so.6 libz.so.1 --- As you can see, tetex, Aiksaurus and other packages are left out. I don't know if this is a big deal or not... I just uploaded the package to ftp.devel.lyx.org/pub/incoming -- Rudi Gaelzer Departament of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
> "Rudi" == Rudi Gaelzer <[EMAIL PROTECTED]> writes: Rudi> I think it's safe to say that the answers to both your questions Rudi> is yes. Rudi> I just don't know if I got the requires list quite right. As per Rudi> instructions, I ran checkinstall with no extra options. On the Rudi> man page, I noticed that you can include extra requirements to Rudi> the final rpm package, but I did not do that. Here's the list Rudi> from: rpm -qpR lyx-1.4.3-1mdvLE2006_qt.i586.rpm What does the LE stand for? Only 2005 was a LE version (because they rushed it out, IIRC). JMarc
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thursday 12 October 2006 11:51, Jean-Marc Lasgouttes wrote: > > "Rudi" == Rudi Gaelzer <[EMAIL PROTECTED]> writes: > What does the LE stand for? Only 2005 was a LE version (because they > rushed it out, IIRC). Really? I didn't pay attention to that... My bad, sorry... perhaps you should remove LE from the package name... > > JMarc -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: > I just don't know if I got the requires list quite right. As per > instructions, I ran checkinstall with no extra options. On the man page, > I noticed that you can include extra requirements to the final rpm > package, but > I did not do that. Here's the list from: I did not know that you used checkinstall. I just corrected the wiki page, because checkinstall builds suboptimal packages. They should not be distributed IMHO. If you use the rpm spec file that is inside the source archive then you get better dependencies. Georg
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thu, 12 Oct 2006, Rudi Gaelzer wrote: > Hi, Christian. > On Wednesday 11 October 2006 17:03, [EMAIL PROTECTED] wrote: > > Ok, so we'll keep the page. I didn't quite understand if you wanted to > > keep the name of the page, or thought it was ok to rename it to 'LyX on > > RPM-based Linux'? (Or if you have another suggestion for the name of the > > page). > > > > cheers > > /Christian > > I think that 'LyX on RPM-based Linux' or something like: 'Compiling LyX on > RPM-based linux' is a good choice, since there are several distros based on > rpm nowadays. I've moved the content to this page http://wiki.lyx.org/LyX/CreatingLyXRPM and also linked to it from this page http://wiki.lyx.org/LyX/LyXOnLinux and made a note that the information has been moved from the page in question, i.e. this page http://wiki.lyx.org/LyX/LyXOnRedHat /Christian -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Thursday 12 October 2006 12:05, Georg Baum wrote: > I did not know that you used checkinstall. I just corrected the wiki page, > because checkinstall builds suboptimal packages. They should not be > distributed IMHO. If you use the rpm spec file that is inside the source > archive then you get better dependencies. > > > Georg Ok. I recompiled using Georg's new instructions on the wiki page. The only difference is that I had to save a copy of lyx.spec on /usr/src/RPM/SPECS and a copy of lyx.xpm on /usr/src/RPM/SOURCES. The package name is now: lyx-1.4.3-1_qt_mdv2006.i586.rpm but the requires list seems to be exactly the same: -- rpm -qpR lyx-1.4.3-1_qt_mdv2006.i586.rpm /bin/sh /bin/sh rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 coreutils python-base libaudio.so.2 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libdl.so.2 libexpat.so.0 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libICE.so.6 libjpeg.so.62 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libqt-mt.so.3 libSM.so.6 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) libX11.so.6 libXcursor.so.1 libXext.so.6 libXft.so.2 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXt.so.6 libz.so.1 Jean-Marc: Could you please remove the previous file and substitute for the new one? Thank you. -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered Linux User # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Tuesday 10 October 2006 17:51, [EMAIL PROTECTED] wrote: I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian Oh, I think this is important. If Paul hadn't scribbled those instructions, I would be really hard-pressed to create the rpm... Mandriva does have official rpm's for Lyx, but only for the older 1.3.x versions. In fact, updates to Mandriva LE are really slow to come by, as compared to fedora, for instance... Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered linux user # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... If your package was built from clean sources and it is useful for a wider audience, i.e. it does not require anything that is not part of your distro, then it would be a good idea to put it on the LyX ftp server. If you want to do that, upload it to ftp.devel.lyx.org/pub/incoming, and tell Jean-Marc that he can move it to the final place (the devel in the address above is important). Georg
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Wed, 11 Oct 2006, Rudi Gaelzer wrote: On Tuesday 10 October 2006 17:51, [EMAIL PROTECTED] wrote: I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian Oh, I think this is important. If Paul hadn't scribbled those instructions, I would be really hard-pressed to create the rpm... Mandriva does have official rpm's for Lyx, but only for the older 1.3.x versions. In fact, updates to Mandriva LE are really slow to come by, as compared to fedora, for instance... Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... I think someone else replied out how you do to upload it. -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Tuesday 10 October 2006 17:51, [EMAIL PROTECTED] wrote: I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian Oh, I think this is important. If Paul hadn't scribbled those instructions, I would be really hard-pressed to create the rpm... Mandriva does have official rpm's for Lyx, but only for the older 1.3.x versions. In fact, updates to Mandriva LE are really slow to come by, as compared to fedora, for instance... Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered linux user # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... If your package was built from clean sources and it is useful for a wider audience, i.e. it does not require anything that is not part of your distro, then it would be a good idea to put it on the LyX ftp server. If you want to do that, upload it to ftp.devel.lyx.org/pub/incoming, and tell Jean-Marc that he can move it to the final place (the devel in the address above is important). Georg
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Wed, 11 Oct 2006, Rudi Gaelzer wrote: On Tuesday 10 October 2006 17:51, [EMAIL PROTECTED] wrote: I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian Oh, I think this is important. If Paul hadn't scribbled those instructions, I would be really hard-pressed to create the rpm... Mandriva does have official rpm's for Lyx, but only for the older 1.3.x versions. In fact, updates to Mandriva LE are really slow to come by, as compared to fedora, for instance... Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... I think someone else replied out how you do to upload it. -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Tuesday 10 October 2006 17:51, [EMAIL PROTECTED] wrote: > > I might have created the page based on Paul's post. The page should > probably say that LyX is in Fedora Extras (whatever that is). > > Is there a point to having a page describing how to create LyX RPM? If so, > maybe the page could be called 'LyX on RPM-based Linux'? > > /Christian Oh, I think this is important. If Paul hadn't scribbled those instructions, I would be really hard-pressed to create the rpm... Mandriva does have official rpm's for Lyx, but only for the older 1.3.x versions. In fact, updates to Mandriva LE are really slow to come by, as compared to fedora, for instance... Anyway, I got at least one person interested in my package. Is there any possibility that I can upload it to an official mirror? I don't have any public repository quota available to me, right now... -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered linux user # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: > Anyway, I got at least one person interested in my package. Is there any > possibility that I can upload it to an official mirror? I don't have any > public repository quota available to me, right now... If your package was built from clean sources and it is useful for a wider audience, i.e. it does not require anything that is not part of your distro, then it would be a good idea to put it on the LyX ftp server. If you want to do that, upload it to ftp.devel.lyx.org/pub/incoming, and tell Jean-Marc that he can move it to the final place (the devel in the address above is important). Georg
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Wed, 11 Oct 2006, Rudi Gaelzer wrote: > On Tuesday 10 October 2006 17:51, [EMAIL PROTECTED] wrote: > > > > I might have created the page based on Paul's post. The page should > > probably say that LyX is in Fedora Extras (whatever that is). > > > > Is there a point to having a page describing how to create LyX RPM? If so, > > maybe the page could be called 'LyX on RPM-based Linux'? > > > > /Christian > > Oh, I think this is important. If Paul hadn't scribbled those > instructions, I would be really hard-pressed to create the rpm... > Mandriva does have official rpm's for Lyx, but only for the older 1.3.x > versions. In fact, updates to Mandriva LE are really slow to come by, > as compared to fedora, for instance... Ok, so we'll keep the page. I didn't quite understand if you wanted to keep the name of the page, or thought it was ok to rename it to 'LyX on RPM-based Linux'? (Or if you have another suggestion for the name of the page). cheers /Christian > Anyway, I got at least one person interested in my package. Is there any > possibility that I can upload it to an official mirror? I don't have any > public repository quota available to me, right now... I think someone else replied out how you do to upload it. -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
lyx 1.4.3 RPM for Mandriva 2006.
Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered linux user # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? -- Rex
Re: lyx 1.4.3 RPM for Mandriva 2006.
On 10/10/06, Rex Dieter [EMAIL PROTECTED] wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, LyX on Mandriva. Paul
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Tue, 10 Oct 2006, Paul Smith wrote: On 10/10/06, Rex Dieter [EMAIL PROTECTED] wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, LyX on Mandriva. I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On 10/10/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, LyX on Mandriva. I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? I fully agree with you, Christian. Paul
Re: lyx 1.4.3 RPM for Mandriva 2006.
Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? +1 as official Mandriva also has rpm packages for Lyx, Mandriva 2006 is just offering a little bit older 1.3x version.
lyx 1.4.3 RPM for Mandriva 2006.
Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered linux user # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? -- Rex
Re: lyx 1.4.3 RPM for Mandriva 2006.
On 10/10/06, Rex Dieter [EMAIL PROTECTED] wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, LyX on Mandriva. Paul
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Tue, 10 Oct 2006, Paul Smith wrote: On 10/10/06, Rex Dieter [EMAIL PROTECTED] wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, LyX on Mandriva. I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On 10/10/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, LyX on Mandriva. I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? I fully agree with you, Christian. Paul
Re: lyx 1.4.3 RPM for Mandriva 2006.
Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? +1 as official Mandriva also has rpm packages for Lyx, Mandriva 2006 is just offering a little bit older 1.3x version.
lyx 1.4.3 RPM for Mandriva 2006.
Hi. I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. I followed the guidelines originally posted by Paul Smith and Christian Ridderström in: http://wiki.lyx.org/LyX/LyXOnRedHat It is not a terribly well-organized rpm package, but it looks like it installed in my MDV2006 box all right. If anyone is interested, I could distribute the package, but I think I have no permission to transfer it to any standard lyx mirror... -- Rudi Gaelzer Department of Physics Institute of Physics and Mathematics Federal University of Pelotas BRAZIL Registered linux user # 153741
Re: lyx 1.4.3 RPM for Mandriva 2006.
Rudi Gaelzer wrote: > I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. > I followed the guidelines originally posted by Paul Smith and Christian > Ridderström in: > > http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? -- Rex
Re: lyx 1.4.3 RPM for Mandriva 2006.
On 10/10/06, Rex Dieter <[EMAIL PROTECTED]> wrote: > I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. > I followed the guidelines originally posted by Paul Smith and Christian > Ridderström in: > > http://wiki.lyx.org/LyX/LyXOnRedHat Now that lyx is in Fedora Extras (and has been for some time), is there really much point in keeping that wiki page around? I am not the creator of that page, although it is based on a post by me. I think the page should be retained, but with another title, say, "LyX on Mandriva". Paul
Re: lyx 1.4.3 RPM for Mandriva 2006.
On Tue, 10 Oct 2006, Paul Smith wrote: > On 10/10/06, Rex Dieter <[EMAIL PROTECTED]> > wrote: > > > I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. > > > I followed the guidelines originally posted by Paul Smith and Christian > > > Ridderström in: > > > > > > http://wiki.lyx.org/LyX/LyXOnRedHat > > > > Now that lyx is in Fedora Extras (and has been for some time), is there > > really much point in keeping that wiki page around? > > I am not the creator of that page, although it is based on a post by > me. I think the page should be retained, but with another title, say, > "LyX on Mandriva". I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? /Christian -- Christian Ridderström, +46-8-768 39 44 http://www.md.kth.se/~chr
Re: lyx 1.4.3 RPM for Mandriva 2006.
On 10/10/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > > I managed to create a RPM package of lyx 1.4.3 for Mandriva Linux LE 2006. > > > I followed the guidelines originally posted by Paul Smith and Christian > > > Ridderström in: > > > > > > http://wiki.lyx.org/LyX/LyXOnRedHat > > > > Now that lyx is in Fedora Extras (and has been for some time), is there > > really much point in keeping that wiki page around? > > I am not the creator of that page, although it is based on a post by > me. I think the page should be retained, but with another title, say, > "LyX on Mandriva". I might have created the page based on Paul's post. The page should probably say that LyX is in Fedora Extras (whatever that is). Is there a point to having a page describing how to create LyX RPM? If so, maybe the page could be called 'LyX on RPM-based Linux'? I fully agree with you, Christian. Paul
Re: lyx 1.4.3 RPM for Mandriva 2006.
> Is there a point to having a page describing how to create LyX RPM? If so, > maybe the page could be called 'LyX on RPM-based Linux'? > > +1 as official Mandriva also has rpm packages for Lyx, Mandriva 2006 is just offering a little bit older 1.3x version.
