Re: [M100] In search of bad DRA< - 4164, 41256, etc.

not sure if i have bad 4116's still will look On Fri, Sep 13, 2019 at 5:14 PM Jeffrey Birt wrote: > It depends on if my insurance company quits fighting paying for the > procedure or not. I'm planning on not being able to make it still. I would > be happy to pay for postage. > > Jeff > >

Re: [M100] Need help with bad RAM identification and replacement

I found a few more in my stock, so there are 3 on arcadeshopper.com..ordering more too On Wed, Aug 21, 2019 at 6:34 PM Chad Hendrickson < chadhendrick...@sbcglobal.net> wrote: > Thank you for confirming. > > If anyone has RAM for sale, please let me know. I’m located in Illinois, > USA. > >

Re: [M100] In the hospital

glad to hear you are going in to get the surgery! Hope it goes well and we will hear from you after you feel a lot better! Greg On Fri, Jul 19, 2019 at 8:05 AM Ken Pettit wrote: > Hey Gang, > > I had to come to the hospital again on Wednesday because of cardio > issues. After the angiogram

Re: [M100] weird serial port (or other?) issue in T200

sounds like something's holding up the serial port, flow control On Thu, Jul 18, 2019 at 10:33 AM Jim Anderson wrote: > So I have been getting back into amateur radio this year (was licensed in > 2002 but slowly fell away from the hobby with children, divorce, etc.) > > I'm sure I'm not the

Re: [M100] Using HTERM on a M100

sounds like maybe either baud rate or cts/rts isnt wired correctly with the cable On Mon, Jul 15, 2019 at 9:09 AM John R. Hogerhuis wrote: > I'm the author. > > Other than loading and launching it, what's your setup? > > It's a terminal program, it doesn't do anything if you don't send or type

Re: [M100] Types of caps in M100

I have cap kits in my store at arcadeshopper.com https://www.arcadeshopper.com/wp/?page_id=11#!/model-100-102-capacitor-kit/p/139509791/category=28313042 On Fri, Jul 12, 2019 at 8:50 AM Stephen Adolph wrote: > popping this back up, > > Is there a good digikey list for M100 electrolytic caps? >

Re: [M100] 102 LCD part

thanks guys! On Wed, Jun 26, 2019 at 2:48 PM Stephen Adolph wrote: > seems like it . > that or AX-4001. > > > On Wed, Jun 26, 2019 at 5:38 PM Gregory McGill > wrote: > >> sorry i meant to remove all that, and do a new subject.. but only did the >> sub

Re: [M100] 102 LCD part

ead. > What are you asking? What part are you referring to? > > thx > Steve > > On Wed, Jun 26, 2019 at 5:01 PM Gregory McGill > wrote: > >> did anyone see this? >> >> On Mon, Jun 24, 2019 at 8:30 PM Gregory McGill >> wrote: >> >>> Can someone confirm that APLX142AAQ is the part? >>> >>> Greg >>> >>

Re: [M100] 102 LCD part

did anyone see this? On Mon, Jun 24, 2019 at 8:30 PM Gregory McGill wrote: > Can someone confirm that APLX142AAQ is the part? > > Greg >

[M100] 102 LCD part

Can someone confirm that APLX142AAQ is the part? Greg On Mon, Jun 24, 2019, 5:19 PM Kurt McCullum wrote: > Thanks a million Steve! Those are the two pins. > > 10 15 > 00 = Bank 1 > 01 = Bank 2 > 11 = Bank 3 > > Based on that, I'm going to tie off of

Re: [M100] Wifi RS232 Trouble

sounds like you should return it, and get a gurumodem or wifi232 or wimodem232 those all work and are tested,, i have the guru's in stock at arcadeshopper.com On Sat, Jun 22, 2019 at 5:43 PM Jason Benson wrote: > I've tried with a null modem and a standard serial cable. I was able to > access

Re: [M100] rexmgr q

looks like you already answered him :) sorry Greg On Tue, May 21, 2019 at 10:47 PM Gregory McGill wrote: > had someone ask me what the "M,1" means in rexmgr right to the right of > REX4.9 on the top line.. > > Greg >

[M100] rexmgr q

had someone ask me what the "M,1" means in rexmgr right to the right of REX4.9 on the top line.. Greg

Re: [M100] New version of LaddieAlpha up

Good choice John.. DO is the easiest to deal with Greg On Sat, May 4, 2019 at 8:53 AM John R. Hogerhuis wrote: > We're not relitigating this, counselor. > > It's my program. I do what I think is best. What I did is what I think is > best. > > The only change I'd make is to make Tsdos not care

Re: [M100] Non-Charger (Terry Cox)

original battery? If so maybe time to replace it. I had one take a couple days to charge so it would boot.. I almost wrote it off Greg On Tue, Apr 23, 2019 at 3:30 PM Chris Fezzler wrote: > I removed the batteries last night and plugged into the power adaptor. > Couldn't get it going again.

Re: [M100] REX replaces internal RAM?

Rex = no ram. just backups of whatever is in ram to a nvram storage I have ram chips in stock.. so you can expand to 32k.. the QUAD used to be available that replaced internal ram but it's no longer being made Greg On Sun, Apr 21, 2019 at 6:25 PM Anthony Coghlan wrote: > Chris, to John’s

Re: [M100] Going online?

there's also this: https://www.arcadeshopper.com/wp/?page_id=11#!/Gurumodem/p/134166147/category=28313042

Re: [M100] REX: Downloading OPTROM images

there's also mcomm for windows http://www.club100.org/memfiles/index.php?direction===Kurt%20McCullum; also likely a false positive on that filter.. Greg On Sun, Mar 24, 2019 at 7:39 PM Peter Noeth wrote: > Group, > > I purchased a REX at Tandy Assembly 2018, but am just now getting around >

Re: [M100] question regarding floppy disks.

>> The combination of >> (Coco, std controller, PC 1.44MB drive + a 720kB dd floppy) works >> >> whereas >> (Coco, std controller, PC 1.44MB drive + a 1.44MBB hd floppy) does not >> work >> >> this is something I don't understand! >&g

Re: [M100] question regarding floppy disks.

likely the floppy controller doesn't support 80 tracks or high density.. most of the controllers of the era are ds/sd 40 track or dsdd 40 track.. are you able to format 720k? ds/dd 80 track? Greg On Sun, Mar 24, 2019 at 2:38 PM Stephen Adolph wrote: > I'll start by saying this isn't an M100

Re: [M100] 100/102 to USB?

mac terminal: https://www.emtec.com/zoc/ probably can find minicom in brew or something too Greg On Wed, Mar 20, 2019 at 2:06 PM John Graf wrote: > I have one or two serial to USB cables, but I can’t find a “Terminal” app > like there used to be on the older Macs, complete with the comm

Re: [M100] DVI Disk Formatting

likely old caps in the drive or controller needing replacement On Fri, Mar 15, 2019 at 6:23 PM Randall Kindig wrote: > Funny you should ask. At Tandy Assembly (http://www.tandyassembly.com) > last year I found the same issue with my single-drive DVI. I can boot from > a disk fine, but cannot

Re: [M100] Greetings to the M100 community.

Welcome Tim! I recommend using mcomm on an android device such as the android tv boxes I sell pre-configured with all the cables needed. Also there is mcomm for windows, laddiealpha for dos/linux/mac and others..if you need something portable a cell phone with android will work as well with an

Re: [M100] ebay seller

I'd be interested in a intact 600 if anyone wants to pass one along packed well :) Greg On Tue, Feb 26, 2019 at 9:44 AM Josh Malone wrote: > On Tue, Feb 26, 2019 at 12:07 PM Tom Dison wrote: > > > > Thanks for the great info. I'm probably going to pass, my current queue > is pretty full with

Re: [M100] Rex vs DVI

I posted a similar experience last year when i got mine with tsdos and dvi trying to copy files from my android mcomm drive to dvi disks is frustrating On Tue, Feb 19, 2019, 5:20 AM Josh Malone wrote: > On Tue, Feb 19, 2019 at 8:05 AM Stephen Adolph > wrote: > > > > Greg, I don't have a DVI,

Re: [M100] Arcade Shopper?

Probably you didnt get your rex from Stephen Pereria.. who said he is new.. I run arcadeshopper.com and am arcadeshopper on most social media.. trying to have a one stop shop for classics like the model 100 line and ti99/4a and coco etc.. Greg On Sun, Feb 10, 2019 at 11:59 PM James Zeun wrote:

Re: [M100] Arcade Shopper?

y. Mid week, I sent an e-mail asking when I might expect it to be > shipped, as it still (even today right now) shows a status of “awaiting > processing.” I got an answer back from Gregory McGill saying that he only > works this part time, and he may ship on Friday or Monday. This for

Re: [M100] Dust Covers

Can i see a photo? Installed is fine On Mon, Feb 4, 2019, 9:33 AM Gary Weber You're right Bert, maybe it could more appropriately be called a > "protective cover". I remember it was black thick plastic and it had the > Club 100 logo on it. I'm basically looking to replicate that, somehow. 3D

Re: [M100] REX in a sub-standard machine

I have ram for the 102 at arcadeshopper.com Greg On Mon, Jan 28, 2019 at 8:15 AM VANDEN BOSSCHE JAN < jan.vandenboss...@vivaqua.be> wrote: > > All it means is - you need to upgrade your RAM, to enjoy the benefits of > more RAM. > > > > That's the bottom line, and that's all I need to know. > >

Re: [M100] REX in a sub-standard machine

bucket = 24k flash image = 32k you can't put 32k in 24k so it will truncate at 24k.. or saving flash images from that machine will only save 24k of data. because that's all there is easy fix: I sell 8k ram at arcadeshopper.com Greg On Fri, Jan 25, 2019 at 11:17 AM Fred Whitaker wrote: > If

Re: [M100] REX in a sub-standard machine

wish I could get more quads :) On Fri, Jan 25, 2019 at 11:17 AM Fred Whitaker wrote: > If it is a Model 100, and you have a quad, you can enjoy 32K on four > screens. > > > > Sent from Mail for > Windows 10 > > > -- >

Re: [M100] Unable to Load TEENY to MT

are you out of ram? :) On Wed, Jan 23, 2019 at 5:59 PM Greg Swallow wrote: > Thank you Erik and John. I got RealTerm to work at 300bd (DTR/DSR) and > dropped TD-DOS.DO into TEXT with a Load from: COM:39E1E. Took a while, I > watched the news.TS-DOS is load and functioning. Yeah! > > Got

Re: [M100] NEC Personal Application Kit

Thank you! On Sat, Jan 5, 2019 at 12:58 PM Terry Stewart wrote: > >For those interested, I was able to get a copy of the NEC Personal > Application Kit tape and pull all the files off. I put everything in a ZIP > file. > >This includes the barcode drivers that somebody was looking for earlier >

Re: [M100] Noob squared

Yep I have more On Tue, Dec 18, 2018 at 9:30 AM Gregory McGill wrote: > I may have more. let me check > > Greg > arcadeshopper.com > > On Tue, Dec 18, 2018 at 4:12 AM Charles Hudson wrote: > >> The offending battery is removed. I had already removed the AAs and 6 &g

Re: [M100] Noob squared

I may have more. let me check Greg arcadeshopper.com On Tue, Dec 18, 2018 at 4:12 AM Charles Hudson wrote: > The offending battery is removed. I had already removed the AAs and 6 VDC > adapter before opening the case. I am opting for an 80 mAh NiMh > replacement. Arcadeshopper is out of

Re: [M100] Noob squared

I have the batteries as well https://www.arcadeshopper.com/wp/?page_id=11#!/Replacement-Batteries/c/32594049/offset=0=nameAsc On Mon, Dec 17, 2018 at 11:47 AM Charles Hudson wrote: > Thank you for your replies. I found them in the archives; I'm not sure > how to access the (current) list

Re: [M100] Noob squared

I have stock of REX :) Greg On Mon, Dec 17, 2018 at 7:56 AM Josh Malone wrote: > Hello Charles! Welcome to Club 100 :) > > You are correct about the ports under the ROM door. The 40-pin DIP is the > system bus connector; it's used for direct system bus peripherals such as > the Disk/Video

Re: [M100] updated REX manager software, + REXNEC.

Thanks Stephen! got mine today https://photos.app.goo.gl/MQFt5ijgar3XvaRJ9 On Tue, Nov 13, 2018 at 6:05 PM Stephen Adolph wrote: > All, > I have an updated software load for REX which I will be posting shortly. > Now that it is working well again, I feel ok selling REXNEC. > I have 3 units

Re: [M100] Olivetti M10 and REX

Great work Stephen! On Fri, Dec 7, 2018 at 9:12 PM Stephen Adolph wrote: > turns out the REXNEC plugs right into M10. I'll test REXManager on M10 > tomorrow. fingers crossed it is essentially done. > > On Fri, Dec 7, 2018 at 10:23 PM John R. Hogerhuis > wrote: > >> Very cool, Steve... I have

Re: [M100] New M100 and M102 owner here, recommendations?

Likely you are looking at my store for the other items.. arcadeshopper.com I sell an android tv box with mcomm already installed and ready to go with all the cables you need to hook it up as well.. nadsbox equivelent Greg On Fri, Nov 16, 2018 at 12:03 PM George Hines wrote: > Hi All, > > Just

Re: [M100] (M100] ZeroPhone

I sell set ups with android tv boxes that do just this Greg On Thu, Oct 4, 2018 at 10:14 AM Greg Swallow wrote: > The idea is a modernized M100 and DVI setup. An Android phone/tablet can > be plugged into a television via USB to use the TV as a display. I have > done this with my Tab3 and a

Re: [M100] program library in WAV format

I talked him down to 80 with make an offer.. fyi Greg On Wed, Oct 3, 2018 at 6:26 AM Greg Swallow wrote: > Has anyone tried, or looked into, something like this device for the CoCo? > > >

Re: [M100] Dead lines in the LCD

This problem seems relatively common. I have two units one with partial and one with a couple full columns out.. It would be nice if we could locate a replacement display to resolve the issue with a modern solution. The game machines have them... Greg On Tue, Sep 18, 2018 at 4:57 PM Jim

Re: [M100] Gonna need to replace my NiCad

It's more the de-soldering that's the tricky part.. soldering the new one in is pretty simple.. On Sun, Sep 16, 2018 at 9:40 PM Daryn Hanright wrote: > Hey gang > > My Tandy 102's NiCad finally looks like its giving up the ghost, so have > ordered this: > > >

Re: [M100] Power on/off issues on M100

Because it's letting some power though but not enough to retain the ram so it scrambles On Mon, Sep 10, 2018, 6:50 AM Josh Malone wrote: > On Mon, Sep 10, 2018 at 9:32 AM Gregory McGill > wrote: > > > > Flakey memory power switch? > > When I got the machine, I

Re: [M100] Power on/off issues on M100

Flakey memory power switch? On Sat, Sep 8, 2018, 2:42 PM Josh Malone wrote: > All, > > So, after resolving the serial port issue on that machine that I > posted about last (replaced the 1604 UART), I declared victory and > sent the machine back to Randy. However, he's now reporting that it >

Re: [M100] New Age Digital Storage Box (NADSBox)

I have the memory modules at arcadeshopper.com and also a android based tpdd solution Greg On Sat, Aug 18, 2018 at 12:12 PM Jesus R wrote: > Team, I know I'm late to the party, but I just purchased a T100 and it > should arrive soon:) I noticed the NADSBox has been discontinued or out of >

Re: [M100] Option ROM burning?

Sure. or you can get a REX from me as well and never have to burn again Greg On Tue, Aug 14, 2018 at 7:50 PM John Ames wrote: > Does anybody on the list have the means to burn an option ROM for me? > My chintzy nameless Willem clone programmer seems to not be working at > the moment and I'd

Re: [M100] T200 Restoration and Mods/Playing

I have some at arcadeshopper.com On Fri, Jul 27, 2018, 7:10 PM Josh Malone wrote: > I hope to build another small batch of REXes soon. Fugu might still have > some in the meantime. > > On Fri, Jul 27, 2018, 10:00 PM Brian White wrote: > >> We can't know what it is until you dump it and upload

Re: [M100] Ask a silly question

Pretty rare my buddy that worked at rs says he only sold a couple the entire time he was there On Tue, Jul 24, 2018, 12:26 PM wrote: > Oh! Well I've owned my M100 for years now and I had never seen the DVI. > Are these rare? What advantages does this give over a stock M100 with a > floppy

Re: [M100] DVI

create and test the copy. > > -- > bkw > > On Tue, Jul 24, 2018, 1:48 AM Gregory McGill > wrote: > >> I got mine today works good so far but no disk. What are my options? >> >> Greg >> >

[M100] DVI

I got mine today works good so far but no disk. What are my options? Greg

Re: [M100] tpdd mcomm setups

got more stock coming in so ready for your order! :) On Mon, Jul 23, 2018 at 10:20 AM Gregory McGill wrote: > same place.. www.arcadeshopper.com/wp I'm temp out of stock but more are > being made > > On Mon, Jul 23, 2018 at 10:17 AM Tom Dison wrote: > >> And where do I fi

Re: [M100] tpdd mcomm setups

; > On Mon, Jul 23, 2018, at 1:39 PM, Gregory McGill wrote: > > I'll have to look I have a android 6 and an android 7 box.. both seem a > little slower.. i have a few comm errors on my android 6 box I am using > personally, but it works on retry > > On Mon, Jul 23, 2018

Re: [M100] GOTEK USB Floppy Emulator vs DVI

Lee, I use flashfloppy.. has more features and is opensource the oled screens are way better than the lcd On Mon, Jul 23, 2018 at 1:30 PM Lee Olivares wrote: > Hey a GoTek, I know those things. > > There is a powerful (commercial) replacement firmware for those gadgets, > HxC2001 has some extra

Re: [M100] tpdd mcomm setups

rt > > > On Mon, Jul 23, 2018, at 11:28 AM, Gregory McGill wrote: > > :D well I'm just trying to get everything in one place and available..not > really making money on my stuff.. just enough to cover part of the time it > takes to do the mailing etc.. > > If anyone wants

Re: [M100] tpdd mcomm setups

:D well I'm just trying to get everything in one place and available..not really making money on my stuff.. just enough to cover part of the time it takes to do the mailing etc.. If anyone wants to put things on my store please contact me direct at arcadeshopper@gmail and we can discuss can do

Re: [M100] GOTEK USB Floppy Emulator vs DVI

you tried one of the GOTEK emulators in a DVI? I have my DVI > converted to > 3.5 with dual 1.44 drives. An emulator in the drive 1: slot would be > useful. > > God Bless, > > GregS <>< > > - Original Message - > From: "Gregory McGill" > To:

Re: [M100] tpdd mcomm setups

same place.. www.arcadeshopper.com/wp I'm temp out of stock but more are being made On Mon, Jul 23, 2018 at 10:17 AM Tom Dison wrote: > And where do I find a Rex? I've really been looking but haven't found one. > > On Mon, Jul 23, 2018, 12:14 PM Gregory McGill > wrote: > &

Re: [M100] tpdd mcomm setups

a TPDD but haven't been able to find a utility disk to use it. > > On Mon, Jul 23, 2018, 10:56 AM Gregory McGill > wrote: > >> I am putting together a few MCOMM TPDD setups using android tv boxes, >> good rs232 cables and a null modem cable if anyone is interested th

[M100] tpdd mcomm setups

I am putting together a few MCOMM TPDD setups using android tv boxes, good rs232 cables and a null modem cable if anyone is interested they are in my store at https://www.arcadeshopper.com/wp Greg

Re: [M100] REX and rom bank

mmand all the way > through. I'm usually determined to see an install to the very end, but at > least had the M102 to succeed. > > *James Keith Houston* > > 404-259-3453 Cell > > 129 Remington Ln > > Acworth, GA. 30101 > > > --

Re: [M100] NEC Rex

glad you are doing better, interested in the REXNEC when you are ready! Greg On Mon, Jul 16, 2018 at 5:58 AM Stephen Adolph wrote: > Hi Roma, > Thanks for your note. Yes I did break my leg in March and am now the > proud owner of a couple of titanium implants in my left tibia/fibula! > Doing

Re: [M100] Got a DVI and rant about shipping

ebay seller mailed me a "new" scsi drive for a dell server, in a flat rate cardboard envelope, that's it.. not even a little bubblewrap showed up sticking half way out one side of the envelope.. On Sat, Jul 14, 2018 at 4:55 PM Lee Olivares wrote: > I’ll share mine: Rare Samsung N501 DVD

Re: [M100] NEC Rex

Me too and can sell some on arcadeshopper.com On Fri, Jul 13, 2018, 11:39 PM z wrote: > My understanding is that Steve had broken his leg, and we all should > wish him well. > > Also, I want an NEC Rex, but he needs enough love to do another run. So > ... I'd like to know how many of us would

[M100] REX and rom bank

Had a customer let me know he couldn't get his new REX to work in his 100 with 'rom bank' I assume any modifications to the option ROM socket would not work with the REX. Is there exception to this or am I correct? Greg

Re: [M100] Model 100 on GoodWill auction site

Went and got it today it works 32k.. contrast seems to be a little flakey otherwise good possibly dirty pot on the dial On Wed, Jul 11, 2018, 3:33 AM Josh Malone wrote: > Nice. Good price if it works. > > On Wed, Jul 11, 2018, 2:57 AM Gregory McGill > wrote: > >> Won

Re: [M100] Model 100 on GoodWill auction site

Won that auction now need to go get it On Wed, Jul 4, 2018, 7:58 AM Gregory McGill wrote: > This is local to me so no shipping  > > On Wed, Jul 4, 2018, 5:35 AM Bob wrote: > >> https://www.shopgoodwill.com/Item/54688381 >> >> >> Check shipping to your area, they seem high to me >> >>

Re: [M100] model 200 arrived..

lect and R/W signals. Any > chip select from the main board that is unique to each driver would be > suspect as well as any traces/logic on the LCD board to the affected areas. > > > > I’m not sure that helps, it will be a case of tracking down signals I’m > afraid. > > >

Re: [M100] model 200 arrived..

n most cases) it >> just lets you see the solder joints in that area better. If it were me I >> would look at the schematic and see which driver ships control that section >> of the screen and give all those joints a good once over. >> >> >> >> Jeff >> &

Re: [M100] model 200 arrived..

look well soldered to > me. > > > > Jeff > > > > *From:* M100 *On Behalf Of *Gregory > McGill > *Sent:* Sunday, July 8, 2018 10:42 AM > *To:* m...@bitchin100.com > *Subject:* Re: [M100] model 200 arrived.. > > > > https://photos.app.goo.gl/R7p1wJ7kvVEgmEL

Re: [M100] model 200 arrived..

; > > *From:* M100 *On Behalf Of *Gregory > McGill > *Sent:* Sunday, July 8, 2018 10:42 AM > *To:* m...@bitchin100.com > *Subject:* Re: [M100] model 200 arrived.. > > > > https://photos.app.goo.gl/R7p1wJ7kvVEgmELMA some gunk by the corner there > > > > On Jul 8,

Re: [M100] model 200 arrived..

main board that is unique to each driver would be suspect as well as any traces/logic on the LCD board to the affected areas. I’m not sure that helps, it will be a case of tracking down signals I’m afraid. Jeff *From:* M100 *On Behalf Of *Gregory McGill *Sent:* Saturday, July 7, 2018 2:40

Re: [M100] wanted m200 (Gregory McGill)

On Sun, Jul 8, 2018, 2:20 AM Gregory McGill > wrote: > >> Yeah that was me >> >> On Sat, Jul 7, 2018, 8:22 PM Nickolas Nolan >> wrote: >> >>> @Gregory, >>> >>> No, it arrangements never worked out. He dropped the price, the

Re: [M100] wanted m200 (Gregory McGill)

Yeah that was me On Sat, Jul 7, 2018, 8:22 PM Nickolas Nolan wrote: > @Gregory, > > No, it arrangements never worked out. He dropped the price, then someone > swiped it for 125 before I could. After arrangements fell through, I was > thinking of just fixing and selling for no turnaround, but

Re: [M100] model 200 arrived..

ars change? > > > > Jeff > > > > *From:* M100 *On Behalf Of *Gregory > McGill > *Sent:* Saturday, July 7, 2018 11:56 AM > *To:* m...@bitchin100.com > *Subject:* [M100] model 200 arrived.. > > > > bottom half of the screen is black bars and changes w

[M100] model 200 arrived..

bottom half of the screen is black bars and changes with screen writes https://photos.app.goo.gl/7kbkwK47soK8vmUv8 any repair info would be appreciated Greg

Re: [M100] wanted m200 (Gregory McGill)

Did you get together with the 225$ guy? On Mon, Jul 2, 2018, 11:01 AM Nickolas Nolan wrote: > The one for $135 looks easy to repair, > > I was almost thinking of buying it to look at myself, but I wouldn't know > what to do with it as I already have 1 good and 1 parts in my trunk. > > ebay:

Re: [M100] Model 100 on GoodWill auction site

This is local to me so no shipping  On Wed, Jul 4, 2018, 5:35 AM Bob wrote: > https://www.shopgoodwill.com/Item/54688381 > > > Check shipping to your area, they seem high to me > >

[M100] Nice write up on converting a model 100 REX to a model 200 REX

http://munk.org/typecast/2018/07/02/converting-a-trs-80-model-100-rex-rom-to-work-in-a-tandy-200/

Re: [M100] wanted m200 (Gregory McGill)

lmk the process on fixing this 200's display :) also I have a couple 100's with dead columns Greg On Mon, Jul 2, 2018 at 11:01 AM Nickolas Nolan wrote: > The one for $135 looks easy to repair, > > I was almost thinking of buying it to look at myself, but I wouldn't know > what to do with it

Re: [M100] wanted m200 (Gregory McGill)

cool i got it for 110 :) Greg On Mon, Jul 2, 2018 at 11:01 AM Nickolas Nolan wrote: > The one for $135 looks easy to repair, > > I was almost thinking of buying it to look at myself, but I wouldn't know > what to do with it as I already have 1 good and 1 parts in my trunk. > > ebay:

[M100] wanted m200

anyone have one working for sale? Ebay is insane.. Greg

Re: [M100] nn - getting back involved.

I see one in stock will have to make some more :) On Thu, Jun 28, 2018 at 9:13 PM Gregory McGill wrote: > Let me check i think I have at least one still > > On Thu, Jun 28, 2018 at 5:42 PM Randall Kindig > wrote: > >> The RAM boards show out of stock, Greg >> >

Re: [M100] nn - getting back involved.

Let me check i think I have at least one still On Thu, Jun 28, 2018 at 5:42 PM Randall Kindig wrote: > The RAM boards show out of stock, Greg > > On Jun 27, 2018, at 12:49 PM, Gregory McGill > wrote: > > I sell both already assembled and tested on arcadeshopper.com > &

Re: [M100] nn - getting back involved.

I sell both already assembled and tested on arcadeshopper.com On Wed, Jun 27, 2018 at 9:00 AM Fugu ME100 wrote: > There are at least two M100 RAM Boards on OSH Park (a DIP version and an > SM Version): > > https://oshpark.com/shared_projects/V0tpeuMg > >

Re: [M100] M200 differences

it has a solder jumper to assert dsr/dtr On Thu, May 31, 2018 at 10:18 AM, John R. Hogerhuis wrote: > > On Thu, May 31, 2018 at 10:10 AM Kurt McCullum wrote: > >> My 200 was picky about the DSR/DTR lines. I seem to recall that without a >> loopback of those it wasn't happy. >> >> > If the

Re: [M100] M200 differences

I had this problem with a wimodem sending xon/xoff to my term program on a commodore and I ended up having to disable xon/off in the terminal to get it to stop locking the terminal up On Wed, May 30, 2018 at 10:13 PM, John R. Hogerhuis wrote: > > Instead of connecting to Wifi232 can you try

[M100] REX now available

http://arcadeshopper.com/wp#!/REX/p/102954443 On Thu, May 3, 2018, 2:22 PM Kevin Becker wrote: > I didn’t even know there was a Facebook group, lol > > > On May 3, 2018, at 3:40 PM, John R. Hogerhuis wrote: > > > > Lots of new subscribers lately.

Re: [M100] New user, AA battery leakage

I can print some and put them in my store at arcadeshopper.com as for the corrosion use vinegar to neutralize the acid and a strong brush like a toothbrush to clean off the stuck on bits.. On Sat, Apr 28, 2018 at 11:13 AM, John R. Hogerhuis wrote: > There are battery covers

Re: [M100] List of capacitors

supp...@lizardhill.com is don's email. knock yourself out Greg On Mon, Apr 23, 2018 at 4:35 PM, Daryl Tester < dt-m...@handcraftedcomputers.com.au> wrote: > On Mon, 23 Apr 2018 09:44:24 -0700, Gregory McGill wrote: > > A while back we did a server upgrade, and the new FTP ser

Re: [M100] List of capacitors

Yep me too, but I did set up a firewall on the BBS that blocks the 'bad countries' that most of the attacks come from.. port 23 open is way too exciting to the morons.. Greg On Mon, Apr 23, 2018 at 10:22 AM, Josh Malone wrote: > Okay - thanks. > > > > The new FTP server

Re: [M100] List of capacitors

with all sorts of dictionary attacks. Now, if any IP fails logging in 5 times it's banned. Hope this helps for everyone!! Don (still lurking in the shadows, lol) On Mon, Apr 23, 2018 at 9:43 AM, Gregory McGill <arcadeshop...@gmail.com> wrote: > yep and as I stated in a post in t

Re: [M100] List of capacitors

sed that they can't fix > this on a single line in the config file. > > -Josh > > On Sun, Apr 22, 2018 at 6:57 PM, Daryl Tester > <dt-m...@handcraftedcomputers.com.au> wrote: > > On Sun, 22 Apr 2018 11:05:29 -0700, Gregory McGill wrote: > > > >> best

Re: [M100] List of capacitors

best to use http://ftp.whtech.com or https://ftp.whtech.com then with that browser On Sun, Apr 22, 2018 at 1:12 AM, Daryl Tester < dt-m...@handcraftedcomputers.com.au> wrote: > A possibly irrelevant data point. > > I tried using ftp://anonymous:@ftp.whtech.com/club100/doc/m100ServiceManua >

Re: [M100] Got my M100!

Leave it overnight.. also take it apart and make sure the battery is not leaking Greg On Thu, Apr 19, 2018 at 7:31 PM, Kevin Becker wrote: > It's probably worth replacing even if you get it working. I proactively > replaced mine that was working fine and was glad that

Re: [M100] Rex

re do I get it from? >> >> Sent from my iPhone >> >> >> On Apr 17, 2018, at 8:05 PM, Chris Kmiec <ckmi...@gmail.com> wrote: >> >> I'd highly recommend Fugu ME100, I got two from him, and they work >> perfectly. Definitely the single most important

Re: [M100] Rex

it is.. they are being made by a few members they will announce here when they are available On Tue, Apr 17, 2018 at 4:29 PM, David Laffineuse wrote: > Hi, I am new to the Model 100 and to this group and was wondering if it > was still possible to acquire a Rex chip. >

Re: [M100] Rex for model 100

btw is there a nec version we can get? Greg On Wed, Mar 21, 2018 at 10:33 AM, Fugu ME100 wrote: > I have a few REX left, please contact me off list. > > On 21/3/18, 10:18 AM, "M100 on behalf of Josh Malone" >

Re: [M100] Needing a tech

I don't see why not. I'll see about putting together a kit on arcadeshopper.com I'm setting up a m100 area and will be carrying some products Greg On Fri, Mar 2, 2018 at 9:16 AM, megarat wrote: > In this vein, is it possible to get a cap kit for the M100, or at least a >

<    1   2   3   4   >