Re: GIMP native Quartz

Hi Ryan, No we don't have a 10.5 i386 builder, and as I said there's practically no reason why anyone should use such a system, since all Intel Macs that support 10.5 can and should upgrade to 10.6. Well.. I quite like 10.5. The story is that I had a MacBook previously running 10.6.8, it

Re: GIMP native Quartz

Hi Ryan, Ryan Schmidt wrote: The "+no_x11" variant is a hack MacPorts used a decade or more ago, because of a deficiency of MacPorts base that would not record in the registry any variants the user had requested to disable (only those the user had requested to enable). That deficiency was

Re: GIMP native Quartz

Hi, On 2017-12-12 21:51:45 +0100 Mojca Miklavec wrote: Usually Trac is better unless you really don't know what to do. cmake was built successfully on the buildbot. Ok... fine... I will open an issue on track. I don't see an obvious error I understand so I ask help.

Re: Flexisheet

Hi, Riccardo Mottola via macports-users wrote: The bad news is that it is still a jam project, upgrading it broke the build for me in a very strange way and I am not an XCode expert. For some reason the Application doesn't link correctly against the FSCore framwork. Any experts that can help

Re: Flexisheet

Hi Michael, Michael wrote: Has anyone ever updated flexisheet for modern (non PPC) systems? are you referring to the Quantrix-like spreadsheet application from Stefan Leuker? What sources are you using? Many many years ago, we of the GNUstep Application Project, asked to make the sources

Re: GIMP native Quartz

libvpx on 10.5 and earlier

Hi, I have big issues building TenFourFox currently because of its integrated libvpx, I haveissues with sse2/sse3 and yasm. If anybody is a bit knowledgeable there the TTF-PPC uses different files so it works, Mr. Kaiser worked essentially in porting libvpx to PPC and 10.4 Another

Re: Compiling TeX Live on 10.5 (was: libatomic build failure 10.5/x86)

Hi Mojca, On 2018-04-26 07:33:30 +0200 Mojca Miklavec wrote: Riccardo, can you please try: sudo port -v build luajit configure.compiler=macports-gcc-6 or sudo port -v build luajit configure.compiler=macports-gcc-7 It should potentially lead to the same issue (it

Re: gcc49 fails to build

Hi, Dave Horsfall wrote: We can't guess what the problem is. Please file a bug report and attach the compressed main.log. I like to make sure that I'm not duplicating a bug report -- how do *you* go bug-hunting? -- but OK, one hidously-long filename "main.log.gz" attached... In the

Re: issue building libgcc 7.3 on Snow Leopard

Hi Ken, Ken Cunningham wrote: o sudo port -v install libmacho you should be good to go. If it works for you as well as it has for me, I'll add it as a build dep for 10.6. Please report back. yes, it works for me! I was able to rebuild libgcc and all installed gccs. I still wonder why it

python 2.7 usage failure

Hi, today during my attempts of TFF build, I get this unexpected stacktrace: Traceback (most recent call last): File "/Users/multix/Documents/code/tenfourfox/mach", line 148, in main(sys.argv[1:]) File "/Users/multix/Documents/code/tenfourfox/mach", line 76, in main mach =

Re: python 2.7 usage failure

Hi Ryan! On 2018-06-25 21:25:02 +0200 Ryan Schmidt wrote: I suppose python is acting up, since this always worked. Can you tell if it is core python or some modules acting up? While not all packages I have are up-to-date since I have some issues to fix, all python modules look to be

libomp upgrade issues

Hi all, I have a strange problem: I have libomp listed as upgradable. I do an upgrade, I get no errors and nothing happens. Even if I clean, the install is extremely quick to the point of being supspicious: Koreander:~ multix$ sudo port clean libomp Password: ---> Cleaning libomp

fail do install dbus

Hi, installing dbus fails with this message: ---> Cleaning dbus Error: Couldn't activate dbus 1.12.8_2: can't create directory "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_dbus": permission denied Koreander:~

Keeping selected ports to a previous version

Hi All, can selected ports be kept at a previous version? E.g. gimp 2.10 currently doesn't compile on older MacOS versions. I have supplied Ken some patches that will fix it on 10.6, but 10.5 and 10.4 are very dyfficult, perhaps impossible. 2.8 continues to work. I'd like to keep that. Can I

Re: Keeping selected ports to a previous version

Hi Ken, On 2018-07-02 20:07:06 +0200 Ken Cunningham wrote: The full description is here , but there is a crucial concept to get. I got the grucial concept before asking, but it was still shadowy to me how to make

Re: ffmpeg on 10.5/PPC

Hi, On 2018-04-29 15:08:11 +0200 Ken Cunningham wrote: I do see that same assembler warning... presumable because we're using the Apple version of "as" rather than the gnu version of "gas" maybe it can be installed/configured? Howver if it is not an issue

Re: ffmpeg on 10.5/PPC

Hi Ken! On 2018-04-29 14:36:02 +0200 Ken Cunningham wrote: clang-3.4 will never work on PPC, so don't even bother. In the sense that it is too broken? It actually starts compiling. I have many ffmpeg versions built on 10.5 PPC, including what I think is

Re: TenFourFox on Intel

Hi Ken, >> OK. My 10.5 Intel machine is humming away, trying to build TenFourFox using >> your latest git commits. It’s about 40 minutes into is so far. >> There were no issues building all the prerequisites using MacPorts default >> portfiles, except for the libidl +universal thing I

Re: Flexisheet

Hi Michael, On 2017-12-18 23:28:40 + Michael wrote: Has anyone ever updated flexisheet for modern (non PPC) systems? Just out of curiosity... was my answer on topic? Was it the Flexisheet you were looking for? Did you play with it? Riccardo

Re: TenFourFox on Intel

Hi Ken, Riccardo Mottola via macports-users wrote: I actually use a different one, it is not commited (*), I attach it here. It disables several problematic features: The goal is currently to "finish the build" and see if we start up the browser. Slowly we can then debug enable th

Re: binary packages for 10.5.8

Hi, Chris Jones wrote: many reasons. For instance security. In my view users should always migrate their machines to the most up to date OS they can run, one that is still receiving security updates, in order to not expose themselves to possible issues. 10.5 for sure hasn't received any

Re: binary packages for 10.5.8

Off topic :) Ken Cunningham wrote: To get reasonable performance out of these machines I always max out the Ram (cheap cheap cheap on Ebay) and in most of them, flip in an SSD. I tried outting a SSD in mine, but it run hiccups... so I bought a new spinning rust HD and that one works fine.

Re: scp ignores case in filenames?

Hi, On 2018-01-20 09:52:28 +0100 Ryan Schmidt wrote: But it looks like Adobe's installer goes a step further and actively prevents you from installing on case-sensitive volumes, and they have a knowledge base article explaining that.

Re: gdb fails to compile on Leopard - C++11 compiler

Hi Mojca, thank you for the hints. On 2018-01-25 12:55:39 +0100 Mojca Miklavec wrote: You can try to add "PortGroup cxx11 1.1" somewhere at the top of the Portfile or install the port with port install gdb configure.compiler= (not sure which one though) and try

Re: binary packages for 10.5.8

Hi Jan, Jan Stary wrote: PPC or Intel ? A buildbot exists for PPC, but not intel Ah, right, my machine is Intel. Thanks. most stuff works fine on 10.5 and I an happy with that OS which is faster than 10.6 if you have 32bit intel CPUs (if you have 64bit, indeed, 10.6 is a recommendable

Re: gdb fails to compile on Leopard - C++11 compiler

Hi, Chris Jones wrote: Or maybe the gdb port could be updated to use one of macports python versions ? can I do this easily as a test in my portfile? could you do it? I already have a newer python installed from macports, so it would be a matter of "using" it. Riccardo

issue upgrading libcxxabi

Hi, I wanted to update all my outdated packages, but I fail with: ---> Cleaning git ---> Fetching distfiles for libcxxabi ---> Verifying checksums for libcxxabi ---> Extracting libcxxabi ---> Configuring libcxxabi Error: libcxxabi is obsolete; please uninstall it. Error: Failed to

Re: issue upgrading libcxxabi

Hi Ken, On 2018-01-30 18:49:01 +0100 Ken Cunningham <ken.cunningham.web...@gmail.com> wrote: On 2018-01-30, at 9:44 AM, Riccardo Mottola via macports-users wrote: Hi, before filing a bug, maybe this is expected and there is a stragey for updating it or replacing it with som

Re: issue upgrading libcxxabi

Hi Christopher! On 2018-01-30 20:16:00 +0100 Christopher Jones wrote: > Do what it says. uninstall libcxxabi…. Did so! uninstalled it running port upgrade outdaed again... did nothing hope everything is fine now :) Riccardo

Re: gdb fails to compile on Leopard - C++11 compiler

Hi, I forgot to reply this! Chris Jones wrote: It appears the port already has support for building against MPs python versions, it just is not enabled by default. Titan ~/Projects/MacPorts/ports > port variants gdb gdb has the variants:    multiarch: Support all target architectures   

Re: TenFourFox on Intel

Re: TenFourFox on Intel

Re: TenFourFox on Intel

Hi Ken, On 2017-12-12 18:59:47 +0100 Ken Cunningham wrote: >> Finally, see this: >> https://sourceforge.net/p/leopard-webkit/wiki/Home/ > > > Just like to make a point of this project. I didn’t think this could > actually be done, but in fact, here it is.

Re: TenFourFox on Intel

Hi, On 2017-12-11 17:44:24 +0100 Ken Cunningham wrote: I'm very interested. Very good. I need some help now! Anybody else? :) I have a Portfile I started here for TenFourFox: https://github.com/kencu/myports/tree/master/www/tenfourfox It builds to a

Re: TenFourFox on Intel

Hi,m On 2017-12-28 00:15:33 +0100 Ken Cunningham wrote: Thanks. You are building on 10.5 Intel still I believe. Yes I do. You could even attempt 10.4, since the official target remains 10.4 PPC "and up". As long as you have the 10.4 SDK you can try

Re: GIMP native Quartz

Hi, Ryan Schmidt wrote: Question: GIMP works quite fine, but compared to the official build I got on the website (which is for 10.6 and up though), in our version all controls look like GTK on X11, while in the other one they look more mac-like, some look being even native. Is this a

GIMP2 fails to build on 10.7

Hi, I am updating gimp2 and it fails to build: /opt/local/bin/clang-mp-5.0 -DHAVE_CONFIG_H -I. -I../.. -DISO_CODES_LOCATION=\"/opt/local/share/xml/iso-codes\" -DISO_CODES_LOCALEDIR=\"/opt/local/share/locale\" -DG_LOG_DOMAIN=\"Gimp-Widgets\" -I../.. -I../.. -I../../app -I../../app

Re: GIMP2 fails to build on 10.7

Hi Ryan! On 2018-08-26 03:08:57 +0200 Ryan Schmidt wrote: > CoreGraphics didn't become a top-level framework until OS X 10.8. On 10.7 it > was only available as a part of ApplicationServices. > > According to >

Re: error building/configuring ninja

Hi Ryan On 08/30/2018 12:10 PM, Ryan Schmidt wrote: Hi Riccardo, Run "sudo port selfupdate" and "sudo port upgrade outdated" to get re2c @1.1_1; re2c @1.1_0 had a bug. This affected all systems, not just Leopard. indeed... some ports needed an override on the compiler to build (clang

cctools fails to build on Snow Leopard

Hi, the latest cctools fails to build on Snow Leopard as follows. Question: is the compiler critical or can I just configure it with a macports compiler? which one? Second question: can it be done automatically? Riccardo /usr/bin/gcc-4.2 -Os -std=gnu99 -Os -DLTO_SUPPORT -g -I../../include

Re: cctools fails to build on Snow Leopard

Hi Christopher, On 09/01/18 00:55, Christopher Jones wrote: > The latest cctools built just fine for the build bots on 10.6 > > http://packages.macports.org/cctools/ > > something is up on your system. Please provide more details which details could be relevant? Just ask me.. this failure is

port listed to be upgraded but not upgraded

Hi, I finished "port upgrade outdated" successfully (on Lion) and in fact I can re-run it and no action happens. Kaiserin:~ multix$ sudo port -v upgrade outdated Password: ---> Scanning binaries for linking errors ---> No broken files found. ---> No broken ports found. however, if I list

error building/configuring ninja

Hey, I was upgrading ports on my Leopard system 10.5, I missed a couple of weeks.. a lot of "big stuff" built well though :) ninja fails - it is not directly selected for upgrade, it must be a dependency. bootstrapping ninja... "./src/inline.sh" kBrowsePy < ./src/browse.py >

Re: MacPorts 2.4.3 has been released

Hi, Lenore Horner wrote: Both last night after receiving this announcement and this morning I have run sudo port selfupdate and received the following response. --->  Updating MacPorts base sources using rsync MacPorts base version 2.4.2 installed, MacPorts base version 2.4.2 downloaded. ---> 

libatomic build failure 10.5/x86

Hi, after the new macports update, I started upgrading packages on 10.5 intel. I get an issue that several packages depend on libatomics and I get this faliure during build: el_libatomic_ops/libatomic_ops/work/libatomic_ops-7.6.4/tests' :info:build /usr/bin/gcc-4.2 -DHAVE_CONFIG_H

Re: Installing gcc6 on a PPC Mac Mini 10.4 gives me hell

Hi, Chris Jones wrote: IMHO we shouldn't do anything to support Mac OS versions that aren't getting security patches from Apple anymore (since it's a dis-service to the rest of the people who use the internet when we make it easier for people to keep unpatched machines connected to that

Re: Compiling TeX Live on 10.5 (was: libatomic build failure 10.5/x86)

Hi Mojca, On 2018-04-25 11:05:31 +0200 Mojca Miklavec wrote: I cannot say why this breaks. This gcc 6 compiler is selected because of PortGroup cxx11 1.1 but as far as I remember only dvisvgm required C++11 and that one is packaged as a separate port anyway. You could

Re: Compiling TeX Live on 10.5 (was: libatomic build failure 10.5/x86)

Hi, Michael Dickens wrote: That said, on 10.6 Intel there's an issue with objc++ compiling, where the OBJCXXFLAGS requires "-fpermissive" to get over some untyped enum issues in some security framework. I had 'port' use the defaults for compiler & other settings, and with a small tweak to

Re: Compiling TeX Live on 10.5 (was: libatomic build failure 10.5/x86)

Hi, On 2018-04-25 20:11:32 +0200 Ken Cunningham wrote: But you have to be very facile at forcing different compilers as I showed you. A very great amount of software no longer builds with MacPorts default compilers on these old systems, and you have to

Re: fail do install dbus

Hi, Ryan Schmidt wrote: the build directory is owned by root - could it be that macports user is trying to use it? We are seeing a lot of reports of this type of problem since the release of MacPorts 2.5. I don't know why. that is very reassuring :) Some fixes or workarounds? Riccardo

Re: configure fails - compiler help

Hi Ken Ken Cunningham wrote: I assume you're on 10.6.8 or newer -- clang and ld are thinking you are building against something newer than 10.5, so looking for the usual link libraries on 10.6.8. no.. the fact is that I am building directly on 10.5, not on 10.6 using a 10.5 SDK! could

Re: netbpm fails to build on Leopard

Hi Ryan, Ryan Schmidt wrote: /usr/bin/gcc-4.2 -o pamtris pamtris.o boundaries.o framebuffer.o input.o triangle.o utils.o -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_graphics_netpbm/netpbm/work/advanced-r3369/lib -lnetpbm

configure fails - compiler help

Hi, I am trying to compile a program using macport's clang. It should build with clang 3.9 as other tried that. It uses ccache, I installed that too from macports. Being on Leopart, I set the 10.5 SDK. However, I get this: configure:9841: checking whether the C++ compiler

Re: configure fails - compiler help

Hi Ken, On 26/10/2018 06:43, Ken Cunningham wrote: On 2018-10-18, at 4:54 PM, Riccardo Mottola wrote: a little experimenting on 10.5 today shows this: $ /usr/bin/ld ld warning: -arch not specified ld: no object files specified for inferred architecture i386 $ /opt/local/bin/ld ld:

Re: gegl issue when doing rev-update

Hi, On 2018-11-09 18:43:56 +0100 Ken Cunningham wrote: openexr was updated a few days ago the new library version is /opt/local/lib/libIlmImf-2_3.24.dylib it looks like gegl (gegl-0.2) is gone now. Not sure where or when it went. there is gegl-0.3, gegl-.04, and gegl-devel. You

Re: gimp2 install

Hi Uli! Uli Wienands wrote: Hi, after Riccardo Mottola mentioned that he contributed a patch to gimp to make Gimp 2.10 run under 10.6 I tried to install it. cool :) I suppos eyou atre trying the Quartz variant. I don't know about your install problem, but it is not direclty gimp related.

Re: gimp2 install

Hi, as you thought, it is specific ASM stuff, so the typos are relative to a precise architecture only, On 2018-11-14 20:55:58 +0100 Ryan Schmidt wrote: On Nov 14, 2018, at 11:17, Riccardo Mottola wrote: I wonder if this will cause issues on my 10.5 at the next upgrade, since it is

gegl issue when doing rev-update

Hi, I got this (on Lion): ---> Scanning binaries for linking errors Could not open /opt/local/lib/libIlmThread-2_2.23.dylib: Error opening or reading file (referenced from /opt/local/lib/gegl-0.2/exr-load.so) Could not open /opt/local/lib/libIexMath-2_2.23.dylib: Error opening or reading

Re: gegl issue when doing rev-update

Hi Bill, On 2018-11-12 17:03:56 +0100 Bill Cole wrote: >> how can I try uninstalling gegl-0.2 without causing issues? I notice it is >> the active "gegl" without version suffix. > > Which would reflect a port maintenance bug, if you were using a current > version of the ports tree. 'gegl'

Re: gimp2 install

Hi! Ryan Schmidt wrote: zstd is a new dependency of the tiff port as of version 4.0.10. It's optional, but I decided to enable it always, for simplicity. If this causes problems, we can change tiff's zstd support to a variant. The log shows you're building universal on 10.6. That

Re: gimp2 install

Hi Uli, Uli Wienands wrote: At present I have clang 3.4, 3.7 and 5.0 installed. Don't know why not 3.9 but then, none of these were deliberately installed anyway, all pulled in as dependencies. But I gather from the file you reference below this is not enough. In fact, it seems like to

gutenprint fails to build

Hi all! latest turn of upgrades on Leopard 10.5 I get the failure below building gutenprint. do you think the issue is the version of GCC used or is gutenprint not compatible with GCC anymore? unfortunately the makefile is not printing out which CC is being used, so which compiler!

netbpm fails to build on Leopard

Hi! with the latest update round, I have this new issue. Any clues? Should I just try a different compiler? a dependency mssing? I can open a ticket of course. I tried configure.compiler=macports-gcc-6 but the issue persists unchancged. I then tried macports-clang-3.9, but it doesn't help

Re: gutenprint fails to build

Hi Chris, Chris Jones wrote: Please provide a *complete* log from a clean build. The compiler version is likely listed in an earlier section you have removed. I actually lost the log because I rebuild, I forced configuring with macports-gcc-6 and it worked. Riccardo

Re: netbpm fails to build on Leopard

Hi Chris, Chris Jones wrote: The log snippet you post below is clearly showing neither of these two compiler options is used. /usr/bin/gcc-4.2 is being used. Same comment as before. Please post trac tickets at https://trac.macports.org/ with *full* *clean* log files. the log snipped is

Re: gutenprint fails to build

Hi Ken, Ken Cunningham wrote: older gcc versions show this error. try with gcc 6 or 7. or we often patch this to move the pragma outside the function, which allows the older compiler to still be usable. as I wrote, the GCC6 build worked. Riccardo

libgcc8 build failure (stage comparison) on Snow Leopard

Hi all, I hope my cctools built with clang 3.4 is working fine :) Next in the upgrade on 10.6.8 process is libgcc which is libgcc8 now (last time I built it it was still v7 IIRC) current outdated shows for me: libgcc @1.0lang/libgcc The following ports

Re: cctools fails to build on Snow Leopard

Hi, On 09/02/18 13:35, Chris Jones wrote: > For starters Why are you building cctools in universal mode ? This is not > standard. I need gcc as universal, possilbly this causes cctools to be universal? I already had this configuration since a year, in any case. Riccardo pEpkey.asc

Re: cctools fails to build on Snow Leopard

Hi, On 09/02/18 17:08, Ken Cunningham wrote: > As part of the LibcxxOnOlderSystems instructions, you can (must) build > cctools against newer llvm headers, but forcing the build with clang-3.4: > > cctools @895_7+llvm39+universal-llvm34 (active) platform='darwin 10' > archs='i386 x86_64'

Re: cctools fails to build on Snow Leopard

Hi Ken, On 09/02/18 16:55, Ken Cunningham wrote: >  usr/bin/gcc-4.2 -Os -std=gnu99 -Os -DLTO_SUPPORT -g -I../../include > -Wall -D_MACH_I386_THREAD_STATUS_FPSTATE_LEGACY_FIELD_NAMES_ > -D_ARCHITECTURE_I386_FPU_FPSTATE_LEGACY_FIELD_NAMES_ > -I/opt/local/include >

Re: libgcc8 build failure (stage comparison) on Snow Leopard

Hi Chris, Chris Jones wrote: libgcc8 builds just fine on 10.6 with its default variants. Its difficult to say if your issue is due to your use of the universal variant (do you *really* need to build everything with this ??) or something else on your system. no, not everything.. but I need

Re: pkg reclaim and versions check

Hi Ken. Ken Cunningham wrote: It can be risky to use port reclaim for systems that can't use the buildbots as backup, or don't have a buildbot like 10.5 Intel or 10.4 PPC. You must be quite careful, or you'll be doing a lot of needless rebuilding. For each port or ports that you know you

gdb compile error on Leopard and patched gcc

Hi all... I suppose this is stuff for Ken.. I have a lot of issues with upgrading the latest turn of packges. Luckly nutls is in - important. gdb has this failure:   CXX    dwarf2-frame.o dwarf-index-write.c: In member function 'void debug_names::build()': dwarf-index-write.c:708:32:

failure to build libuv (Leopard)

Hi, I have an issue upgrading libuv and this is blocking a couple of other dependencies apparently. The failure I see is: /bin/sh ./libtool  --tag=CC   --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"libuv\" -DPACKAGE_TARNAME=\"libuv\" -DPACKAGE_VERSION=\"1.25.0\"

Re: gnutls and LTS on 10.5

Hi Ken, I had finally some time to test your suggestions, below my feedback. libs/libcrypto.a |  | /usr/bin/sed 's/.* //' | sort | uniq > .libs/libgnutls.exp ../libtool: eval: line 1731: syntax error near unexpected token `|' this occurs because the version of nm used to process the

Re: Poppler and Snow Leopard

Hi, Ken Cunningham wrote: builds fine with gcc7 as well (legacysupport PG added for the missing strn* function) with gcc 6.5 too (by forcing configure) ! very good. Riccardo

Re: segfault while building gimp

Hi, Ken Cunningham wrote: This error looks similar, if not completely identical: I think your fix will be on that site, anyway. Some error in gegl on Darwin. the error looks similar, although the stacktrace is totally different. There is a

Re: Gimp doesn't start

Hi, Vincent Habchi wrote: Nah. This is not X11 related but Cocoa-. It means the underlying handling code for some UI elements is missing, which is rather strange. When you launch GIMP, do you (briefly) see the X11 icon popping up? Did you installed GTK3 with the +quartz variant too? I would

Poppler and Snow Leopard

Hi all, today I tried to upgrade packages on SL 10.6, first I got this issue: ---> Attempting to fetch poppler-0.71.0.tar.xz from http://nue.de.distfiles.macports.org/poppler ---> Verifying checksums for poppler ---> Extracting poppler ---> Applying patches to poppler ---> Configuring

segfault while building gimp

Hi, I am trying to build gimp 2.10 on Leopard! I did some further backports in gtk3 that could be enough. The main issue is that the native file chooser is heavily 10.6 stuff dependent, for now I tried to disable it, maybe better things can be done, but I don't think they should cause the

Re: segfault while building gimp

Hi, I think the issue is in GEGL... On 2018-11-23 08:55:24 +0100 Ken Cunningham wrote: When this happens, you need to go manually. Go into the directory where the issue occurred: cd

gnutls and LTS on 10.5

Hi, I am rebuilding gnutls as an upgrade and it fails. The compile error I see is: libtool: compile: /opt/local/bin/clang-mp-3.4 -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/opt/local/share/locale\" -I./../gl -I./../gl -I./includes -I./x509 -I./includes -I./includes -I./x509

Re: conflicting variants while rebuilding a dependency

Hi Joshua, On 2019-01-13 02:04:30 +0100 Joshua Root wrote: The following ports are currently installed: gexiv2 @0.10.8_1+python27+python36 (active) So, I suppose that when it was installed, the two python variants were possible, but now now anymore? It's boost complaining about

Re: conflicting variants while rebuilding a dependency

Hi Moja, On 2019-01-12 20:39:08 +0100 Mojca Miklavec wrote: I did some "tests" to get further information. It may not be a bug, just an inconvenience. I still think users should be able to usually just "upgrade". gexiv2 is a dependency for me, I never installed it directly. gexiv2 still

conflicting variants while rebuilding a dependency

Hi all! I get this (Lion 10.7): --> Scanning binaries for linking errors Could not open /opt/local/lib/libexiv2.26.dylib: Error opening or reading file (referenced from /opt/local/lib/libgexiv2.2.dylib) ---> Found 1 broken file, matching files to ports ---> Found 1 broken port, determining

SSE & clang 3.7

Hi! I am trying quite stubbornly to compile ArcticFox on 10.5. When using clang 3.9, which I know works fine on 10.6 and produces good results, I get an "illegal instruction" at a certain point and "don't know from what". I have issues using gcc 6.5 on Mac (works on other platforms. Clang

gimp doesn't open images

Hi All, after upgrading all my ports, GIMP is malfunctioning. It starts, but then it will fail at loading any image, spitting out two alert messages, but not crashing (the loading plugin has the issue). Any of you experiencing something similar? Riccardo

Re: gimp doesn't open images

Hi Piet, Piet van Oostrum wrote: Any of you experiencing something similar? https://trac.macports.org/ticket/57842 it looks indeed very similar :) Same error.. however for me it happens both for JPEG and TIFF images. BMP does work :) The bug looks closed with the addition of patches?

Re: gimp doesn't open images

Hi, On 2019-01-30 01:13:13 +0100 Marius Schamschula wrote: > Strange, > > With the patched exiv2, I can open jpeg and tiff files in Gimp w/o any issues. > > High Sierra, > > exiv2 @0.27_1 (active) platform='darwin 17' archs='x86_64' > date='2019-01-15T16:54:11-0600’ > gimp2

Re: smtube -- useful little youtube browser.

Hi Uli On 2/2/19 7:05 AM, Ken Cunningham wrote: config.status:1261: creating Makefile config.status:1413: error: could not create Makefile Which is a weird error --- is your disk full or something? check permissions... if your disk it is not full, perhaps something is not writable - check

Re: smtube -- useful little youtube browser.

Hi, On 2/2/19 5:01 PM, Uli Wienands wrote: Next step is that gnutls does not want to build. I get a message about it cannot build with autoconf-archive being active. I'll have to put this down for now as some real work needs to get done first. I have received a similar message, I

Re: browser recomendations

Hi James, James Linder wrote: From firefox’s forums: Ah, I see Mozilla is adopting the Microsoft Windows 10 attitude: “We know what’s best for you. Turn off updates completely? What folly! We reserve the right to nag you incessantly until you comply! Use a feature which we deem obsolete or

Re: ghostview gsview gsview32

Hi, On 4/8/19 2:14 PM, Dr M J Carter wrote: A question: does macports supply something like gsview? Under Windows I’m using still the very useful PS viewer (ghostscript) gsview32.exe (Version 5.0). Has this version or another similarly well usable version been ported to macOS (macports)? I

Re: after latest update, gimp not opening files

Hi Ken, Ken Cunningham wrote: sounds like error noted before in exiv2 https://trac.macports.org/ticket/57842 yes, sounds very similar... the fix worked for me, how did the bug come back? Riccardo

Re: after latest update, gimp not opening files

Hi Ryan! On 2019-05-29 10:17:15 +0200 Ryan Schmidt wrote: On May 26, 2019, at 09:21, Riccardo Mottola wrote: The error I am seeing is as in the attached screenshot. The screenshot says the plug-in crashed. Did that leave a crash log in ~/Library/Logs/DiagnosticReports? If so, please

Re: after latest update, gimp not opening files

Hi Lenore, On 2019-05-31 22:48:45 +0200 Lenore Horner wrote: >> May 31 22:22:34 Kaiserin [0x0-0x1d01d].org.gimp.GIMP[28473]: Using >> the >> fallback 'C' locale. >> May 31 22:22:35 Kaiserin [0x0-0x1d01d].org.gimp.GIMP[28473]: Session D-Bus >> not running. Try running `launchctl load

file with wrong checksum

Hi all, while upgrading, I god an error telling me that I got a size mismatch fro libidn2-2.2.0.tar.gz I suppose a network error, or maybe a DNS error or server werror where just a small file with a few bytes containing the error gets created. How can I resume? I had the birlliant idea

Re: after latest update, gimp not opening files

Hi Ryan, On 6/1/19 3:12 PM, Ryan Schmidt wrote: Sounds like it can't find pygtk. This is surprising, since the gimp2 port's +python27 variant does declare a dependency on the py27-pygtk port. Can you verify that gimp2 is installed with the +python27 variant and that the py27-pygtk port is

Re: 10.5 Leopard and 64bit support

Hi, Riccardo Mottola via macports-users wrote: Now, clearly 10.5 has 64bit support, however, freshly booted and installed, I notice that all processes (by Apple) are running in 32bit mode. How will MacPorts install? I fear everything in 32bit. Or is it smart= How can I build 64bit apps

  1   2   3   >