I manage a list through CPanel v. 94.0.2 and I also have server access (from our paid host). Mailman v.2.1.33-2.cp1186.
I just tried to send a message and got this:
"A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The
following
At 08:23 PM 10/17/2017, Mark Sapiro wrote:
On 10/17/2017 05:32 PM, David Andrews wrote: >
At one time I set > Reply-To: header munging >
under general settings to Yes. Some of my users
used a screen reader > that balked unless the
header was munged, for some reason. Well
that > software
On 10/17/2017 05:32 PM, David Andrews wrote:
> At one time I set
> Reply-To: header munging
> under general settings to Yes. Some of my users used a screen reader
> that balked unless the header was munged, for some reason. Well that
> software has gone away, and ISP's are much pickier these
At one time I set
Reply-To: header munging
under general settings to Yes. Some of my users used a screen reader
that balked unless the header was munged, for some reason. Well that
software has gone away, and ISP's are much pickier these days, with
MARC and dkim and SPF etc. Would this
Hi and hope the answer(s) to my question are relatively simple. On one of two
lists I manage, some people are getting deleted due to too many bounces. And
the bounces seem to be related to their mail provider not allowing the
messages. As far as I can tell, the main culprits are gmail,
On 11/10/2016 10:49 AM, Christian F Buser via Mailman-Users wrote:
>
> On September 2, I asked here about a problem that subsciber's email addresses
> were displayed in the message headers, and you advised me to change the
> delivery method of Mailman to "Full Personalization".
What I said on
Hi,
On 11/10/2016 10:49 AM, Christian F Buser via Mailman-Users wrote:
The provider said that he can increase the numnber of messages per
connection but thinks that this is also a security issue (spam) and the
amount can only be set server-wide (no possibility to make an exception
rule for
Hi all
We have Mailman 2.1.21 running on a cPanel (58.0.34) installation. Our biggest
"regular" list has something over 200 subscribers.
On September 2, I asked here about a problem that subsciber's email addresses
were displayed in the message headers, and you advised me to change the
Hello,
I need help please. I am the administrator of a mailing list on Mailman 2.1.9 .
It's been 3-4 days, mails are not being delivered. Not mine, or anyone else
from the list. They are not held for approval by the admin, and no message or
error is being sent. The emails just disappear once I
* Remy .RIGO. N. rigo...@hotmail.com:
Hello,
I need help please. I am the administrator of a mailing list on Mailman
2.1.9 . It's been 3-4 days, mails are not being delivered. Not mine, or
anyone else from the list. They are not held for approval by the admin,
and no message or error is
On 9/12/2011 5:39 AM, Ralf Hildebrandt wrote:
* Remy .RIGO. N. rigo...@hotmail.com:
I need help please. I am the administrator of a mailing list on Mailman
2.1.9 . It's been 3-4 days, mails are not being delivered. Not mine, or
anyone else from the list. They are not held for approval by the
On 11/18/2008 12:14 PM, Jewel wrote:
*My smtp-failure and error logs are not helping me determine what's
wrong. Whenever I post a test to any list so far it always gets
delivered. But I have a few users who said they have tried several times
and don't see anything. I had one woman try again
On 11/18/2008 02:09 PM, Jewel wrote:
I know it's not a gmail problem because it's happening with so many
lists. I did notice that my CPU is almost always at 100% due to python -
don't know why. I know my machine is spitting out lots of mail but
cannot figure out what there is such a delay.
I recently upgraded my Mailman onto a new machine. It appeared
everything was running smoothly except now I have users saying they are
posting and not seeing it come through. All messages are successfully
posting to the archives and I am seeing most messages get delivered but
not 100%. I
Jewel wrote:
---I recently upgraded my Mailman onto a new machine. It appeared
---everything was running smoothly except now I have users saying they are
---posting and not seeing it come through. All messages are successfully
---posting to the archives and I am seeing most messages get
I know it's not a gmail problem because it's happening with so many
lists. I did notice that my CPU is almost always at 100% due to python -
don't know why. I know my machine is spitting out lots of mail but
cannot figure out what there is such a delay.
Ed at JustBrits wrote:
Jewel wrote:
On Tue, September 11, 2007 18:24, Mark Sapiro wrote:
Alexandros G. Fragkiadakis wrote:
the last few days i get hundreds of warnings like the following:
Transcript of session follows.
Out: 220 xxx.xxx.xxx.xx ESMTP Postfix
In: ehlo xxx.xxx.xxx.xx
Out: 250-xxx.xxx.xxx.xx
Out:
Alexandros G. Fragkiadakis wrote:
the last few days i get hundreds of warnings like the following:
Transcript of session follows.
Out: 220 xxx.xxx.xxx.xx ESMTP Postfix
In: ehlo xxx.xxx.xxx.xx
Out: 250-xxx.xxx.xxx.xx
Out: 250-PIPELINING
Out: 250-SIZE 2048
Out: 250-VRFY
Out: 250-ETRN
[EMAIL PROTECTED] wrote:
When I try to access to python shell with mailman user ( @# su
mailman ) I've got a error :
This account is currently not available.
Try running these as any 'ordinary' user - not root.
Also try sending mail using the example in the post at
Hi,
I'm in trouble. I've read the FAQ and everything about it on mailman site.
My problem is described in the FAQ (6.14) :
http://www.python.org/cgi-bin/faqw-mm.py?req=showfile=faq06.014.htp
I see these log entries in smtp-failure:
Dec 22 21:03:29 2004 (1060) delivery to [EMAIL PROTECTED]
On 12/15/06 6:45 PM, Brad Knowles [EMAIL PROTECTED] wrote:
At 10:48 AM -0300 12/15/06, Andres Tarallo wrote:
We need to receive a notification that the suscribers had received the mail.
We where thinking in adding a header that makes the mail client return an
automatic answer.
You can
We're deploying mailman to deliver information to a lot of people (1200
suscribers). The suscribers can't post to the list.
We need to receive a notification that the suscribers had received the mail.
We where thinking in adding a header that makes the mail client return an
automatic answer.
Any
Andres Tarallo wrote:
We need to receive a notification that the suscribers had received the mail.
We where thinking in adding a header that makes the mail client return an
automatic answer.
Don't do it. It is totally unreliable, and only serves to annoy people.
No matter what Header(s) you
At 10:48 AM -0300 12/15/06, Andres Tarallo wrote:
We need to receive a notification that the suscribers had received the mail.
We where thinking in adding a header that makes the mail client return an
automatic answer.
You can put in a header that some mail clients will recognize, and
I just replaced an old mailman server last night and was sent an email
saying that mail is bouncing. What could be causing this?
Subject:
Uncaught bounce notification
From:
[EMAIL PROTECTED]
Date:
Tue, 21 Mar 2006 10:21:32 -0600
To:
[EMAIL PROTECTED]
The attached message was received as a
The old server had the email: [EMAIL PROTECTED] as the list
administator. But now email is trying to deliver to
[EMAIL PROTECTED] How can this be corrected?
Jewel wrote:
I just replaced an old mailman server last night and was sent an email
saying that mail is bouncing. What could be
Jewel wrote:
The old server had the email: [EMAIL PROTECTED] as the list
administator. But now email is trying to deliver to
[EMAIL PROTECTED] How can this be corrected?
Change it on the lists admin web interface General Options page.
--
Mark Sapiro [EMAIL PROTECTED] The highway is
I went into a few lists and see that the email is
[EMAIL PROTECTED] I don't know where this [EMAIL PROTECTED]
is coming from. I am assuming this is some default setting within
Mailman or somewhere esle which I need to locate and change. I never
created the account manually. I upgraded
Jewel wrote:
I went into a few lists and see that the email is
[EMAIL PROTECTED] I don't know where this [EMAIL PROTECTED]
is coming from. I am assuming this is some default setting within
Mailman or somewhere esle which I need to locate and change.
There are no default addresses that
You stuffed up the ownerships/permissions on the files/directories
while restoring from backup.
Specifically this file was not possible to read:
/usr/local/cpanel/3rdparty/mailman/lists/tf-board_tolefriends.com/config.db
maybe try to run the included check_perms
or have a look at the backups
30 matches
Mail list logo
