RE: [MDT-OSD] DaRT use in SCCM Task Sequence - Question
I have been doing UVNC during the WinPE Phase myself (don’t got the license for dart). To improve a little on that blogpost. First make sure that you download the SecureVNC plugin from http://www.uvnc.com/downloads/encryption-plugins/87-encryption-plugins.html It solves to major issues with VNC. 1. The encryption algorithm is very weak – with this plugin you can use AES 2. The VNC standard only allows for eight character passwords. You can enter longer passwords but only the eight first will be used. This plugin changes that You can also add certificates to the mix to beef up security some more. The second improvement is to do the firewall part a little better. The blogpost says that we should disable the firewall and leave it disabled. I prefer to stop it, reg add the proper firewall rules for Uvnc and then restart the FW. Now we have a properly configured FW instead Best Regards Mats From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Daniel Ratliff Sent: den 16 september 2016 17:02 To: mdtosd@lists.myitforum.com Subject: RE: [MDT-OSD] DaRT use in SCCM Task Sequence - Question There are lots of options to do this with VNC, but it is usually a less secure method. Gary Block just did a post a few weeks ago even. http://garytown.com/dart-vnc-remote-during-osd-without-integration http://syswow.blogspot.com/2012/05/remote-control-during-sccm-osd-without.html https://morecomputerstuff.wordpress.com/2015/05/08/remote-access-vnc-to-osd-build-during-winpe/ Daniel Ratliff From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Miller, Todd Sent: Friday, September 16, 2016 10:43 AM To: mdtosd@lists.myitforum.com Subject: RE: [MDT-OSD] DaRT use in SCCM Task Sequence - Question There are times during OS deployment that it will not be possible to communicate with the client system. For instance during Windows setup, the network drivers have not been loaded yet, so obviously no way to connect to the computer. AMT would be able to but you’ve already said that is not possible. From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of S ConfigMgr Sent: Friday, September 16, 2016 5:05 AM To: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Subject: [MDT-OSD] DaRT use in SCCM Task Sequence - Question Hi All, Can i use RemoteRecovery.exe DaRT (after WINPE stage) during the SCCM Task Sequence deployment ? Currently am able to take control in WINPE state... But this is not enough... for us... we wanted to take remote of the machine start to end of the installation... IS it possible ? or there any other soultions ? [Image removed by sender.] -- Thanks, ED Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
RE: [MDT-OSD] DaRT use in SCCM Task Sequence - Question
There are lots of options to do this with VNC, but it is usually a less secure method. Gary Block just did a post a few weeks ago even. http://garytown.com/dart-vnc-remote-during-osd-without-integration http://syswow.blogspot.com/2012/05/remote-control-during-sccm-osd-without.html https://morecomputerstuff.wordpress.com/2015/05/08/remote-access-vnc-to-osd-build-during-winpe/ Daniel Ratliff From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Miller, Todd Sent: Friday, September 16, 2016 10:43 AM To: mdtosd@lists.myitforum.com Subject: RE: [MDT-OSD] DaRT use in SCCM Task Sequence - Question There are times during OS deployment that it will not be possible to communicate with the client system. For instance during Windows setup, the network drivers have not been loaded yet, so obviously no way to connect to the computer. AMT would be able to but you’ve already said that is not possible. From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of S ConfigMgr Sent: Friday, September 16, 2016 5:05 AM To: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Subject: [MDT-OSD] DaRT use in SCCM Task Sequence - Question Hi All, Can i use RemoteRecovery.exe DaRT (after WINPE stage) during the SCCM Task Sequence deployment ? Currently am able to take control in WINPE state... But this is not enough... for us... we wanted to take remote of the machine start to end of the installation... IS it possible ? or there any other soultions ? [https://ssl.gstatic.com/ui/v1/icons/mail/images/cleardot.gif] -- Thanks, ED Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
RE: [MDT-OSD] DaRT use in SCCM Task Sequence - Question
There are times during OS deployment that it will not be possible to communicate with the client system. For instance during Windows setup, the network drivers have not been loaded yet, so obviously no way to connect to the computer. AMT would be able to but you’ve already said that is not possible. From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of S ConfigMgr Sent: Friday, September 16, 2016 5:05 AM To: mdtosd@lists.myitforum.com Subject: [MDT-OSD] DaRT use in SCCM Task Sequence - Question Hi All, Can i use RemoteRecovery.exe DaRT (after WINPE stage) during the SCCM Task Sequence deployment ? Currently am able to take control in WINPE state... But this is not enough... for us... we wanted to take remote of the machine start to end of the installation... IS it possible ? or there any other soultions ? [https://ssl.gstatic.com/ui/v1/icons/mail/images/cleardot.gif] -- Thanks, ED Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete or destroy all copies of the original message and attachments thereto. Email sent to or from UI Health Care may be retained as required by law or regulation. Thank you.
Re: [MDT-OSD] DaRT use in SCCM Task Sequence - Question
My last job invested in making sure vPro was enabled on all computer purchases, then management decided not to spend the money for the implementation project. (Oil and gas, there was no money for any projects) Sent from my iPhone > On Sep 16, 2016, at 7:29 AM, S ConfigMgr wrote: > > no... as V-Pro chip is not mandatory in all models :( > >> On Fri, Sep 16, 2016 at 5:52 PM, Joshua Delaughter >> wrote: >> Have you thought about vPro? >> http://www.intel.com/content/www/us/en/architecture-and-technology/intel-active-management-technology.html >> >> -- >> Joshua Delaughter >> www.joshuadelaughter.com | www.fromrebeltoriches.com >> >>> On Fri, Sep 16, 2016 at 5:04 AM, S ConfigMgr >>> wrote: >>> >>> Hi All, >>> >>> Can i use RemoteRecovery.exe DaRT (after WINPE stage) during the SCCM Task >>> Sequence deployment ? >>> >>> >>> Currently am able to take control in WINPE state... But this is not >>> enough... for us... we wanted to take remote of the machine start to end of >>> the installation... >>> >>> IS it possible ? >>> >>> or there any other soultions ? >>> >>> >>> -- >>> Thanks, >>> ED >> > > > > -- > Thanks, > ED
Re: [MDT-OSD] DaRT use in SCCM Task Sequence - Question
no... as V-Pro chip is not mandatory in all models :( On Fri, Sep 16, 2016 at 5:52 PM, Joshua Delaughter < joshua.delaugh...@gmail.com> wrote: > Have you thought about vPro? http://www.intel.com/content/www/us/en/ > architecture-and-technology/intel-active-management-technology.html > > -- > Joshua Delaughter > www.joshuadelaughter.com | www.fromrebeltoriches.com > > On Fri, Sep 16, 2016 at 5:04 AM, S ConfigMgr > wrote: > >> >> Hi All, >> >> Can i use RemoteRecovery.exe DaRT (after WINPE stage) during the SCCM >> Task Sequence deployment ? >> >> >> Currently am able to take control in WINPE state... But this is not >> enough... for us... we wanted to take remote of the machine start to end of >> the installation... >> >> IS it possible ? >> >> or there any other soultions ? >> >> >> -- >> Thanks, >> ED >> > > -- Thanks, ED
Re: [MDT-OSD] DaRT use in SCCM Task Sequence - Question
Have you thought about vPro? http://www.intel.com/content/www/us/en/architecture-and-technology/intel-active-management-technology.html -- Joshua Delaughter www.joshuadelaughter.com | www.fromrebeltoriches.com On Fri, Sep 16, 2016 at 5:04 AM, S ConfigMgr wrote: > > Hi All, > > Can i use RemoteRecovery.exe DaRT (after WINPE stage) during the SCCM Task > Sequence deployment ? > > > Currently am able to take control in WINPE state... But this is not > enough... for us... we wanted to take remote of the machine start to end of > the installation... > > IS it possible ? > > or there any other soultions ? > > > -- > Thanks, > ED >