-
From: mercedes-boun...@okiebenz.com
[mailto:mercedes-boun...@okiebenz.com] On Behalf Of George Larribeau
Sent: Monday, May 10, 2010 10:51 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 300SD Front Suspension Woops !!
Thank you everyone .
A Shop near work in Carrollton Texas, Arthur's Mercedes
I used silicone grease ...
- Original Message -
From: Rich Thomas richthomas79td...@constructivity.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, May 09, 2010 9:45 PM
Subject: Re: [MBZ] 300SD Front Suspension Woops !!
Did you soap up (or otherwise lube
They are in good condition ...
GL
- Original Message -
From: Jaime Kopchinski jaime...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, May 09, 2010 10:26 PM
Subject: Re: [MBZ] 300SD Front Suspension Woops !!
Hi George,
I did the front end in my uncle's
wrote:
I used silicone grease ...
- Original Message - From: Rich Thomas richthomas79td...@constructivity.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, May 09, 2010 9:45 PM
Subject: Re: [MBZ] 300SD Front Suspension Woops !!
Did you soap up (or otherwise lube
,every one ...
- Original Message -
From: John Reames jwrea...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, May 09, 2010 10:50 PM
Subject: Re: [MBZ] 300SD Front Suspension Woops !!
I used a huge old vise to press the ends on.. I think the important
(including cost)
GL
Dallas Tx.
Thank you ,every one ...
- Original Message - From: John Reames
jwrea...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, May 09, 2010 10:50 PM
Subject: Re: [MBZ] 300SD Front Suspension Woops !!
I used a huge old vise
Thank you everyone .
A Shop near work in Carrollton Texas, Arthur’s Mercedes-Benz Service
pressed them on and sold me one new busshing, ( I trashed one) used one
part that I supplied
the total bill was less that $90 I will remember them.
I have The right side arms are in , steering knuckle ,
Tip for silicone grease, get the permatex silicone dielectric grease from
the FLAPS, it's amazing for anything electrical/vac/assembly related and
holds up nicely.
Glad to hear you got em in, and ya can't beat that price. :)
My 2 cents,
Walt
On May 10, 2010 10:52 PM, George Larribeau
Started a job Saturday to replace ball joints (upper and lower) lower
control arm bushings shocks and some brake service ...
It was going better than planed at firts, got the upper new control arms
installed, got the old ball joints pounded out of the knuckles,and the
new ones pressed in
Did you soap up (or otherwise lube) the bushings? That helps them go in
easier, maybe straighter?
--R
On 5/9/2010 10:15 PM, George Larribeau wrote:
Started a job Saturday to replace ball joints (upper and lower) lower
control arm bushings shocks and some brake service ...
It was going
Hi George,
I did the front end in my uncle's 300TD last year and found that the
lower control arms had corrosion where the bushings fit and was no
longer clean, round, etc. I exchanged the bushings to the dealer for
new control arms since I couldn't see the possibility of installing
the new
I used a huge old vise to press the ends on.. I think the important
thing is that the thing can press the ends on parallel to each other.
--
John W Reames
jwrea...@comcast.net
Home: +14106646986
Mobile: +14437915905
On May 9, 2010, at 22:15, George Larribeau gu...@airmail.net wrote:
Started
12 matches
Mail list logo