FYI.
Craig
https://www.northerntool.com/shop/tools/product_200332201_200332201
BatteryMINDer Plus Battery Charger/Trickle Charger/Desulfator — 12 Volt,
1 Amp, Model# 12117TC
Reg. $67.99
Sale $19.99
Order today to get this price
* Full-time battery monitoring automatically tests battery con
Ever wonder what all those numerical terminal designations mean?
So did I.
Attached are the files I found.
Craig
klemmenbezeichnungen.pdf
Description: Adobe PDF document
bosch.terminal.designations.pdf
Description: Adobe PDF document
___
http://www.okiebe
On Tue, Jun 29, 2021, at 1:37 PM, Rick Knoble via Mercedes wrote:
> Does anyone know of a weather radar site that shows more than the
> last hour of precipitation movement?
I posed the question to my local NWS administrator's email and got the
following response:
Good morning Craig,
I have experienced recently our '93 300D running roughly after I start
it. When this happens, the tachometer is not working. A varying amount
of time later, the engine starts running smoothly, always accompanied
by the tachometer working.
I have changed fuse #5: stop lamp, instrument, front roof l
On Wed, 14 Jul 2021 17:48:48 -0400 Allan Streib via Mercedes
wrote:
> Went to the library, got a book on Tecumseh engines, learned what
> timing marks on gears were about, and got it back together correctly.
> And it ran fine for years after that.
Congratulations!
Craig
__
On Tue, 13 Jul 2021 21:08:07 -0500 Peter Frederick via Mercedes
wrote:
> Crank position sensor is bad or the connection behind the head is
> corroded. Runs rough because it's on the mechanical idle, not the
> computer controlled idle, and the tach is driven off that signal.
Thank you for the in
On Fri, 16 Jul 2021 10:47:04 + "dan penoff.com via Mercedes"
wrote:
> Very cool. I especially like the trafficators, or what we used to call
> “macht nichts” (sp?) on VWs because they rarely worked.
>
> I’ll be driving close to this tomorrow - if I had time I would check it
> out just to be
On Fri, 23 Jul 2021 18:37:09 -0400 Meade Dillon via Mercedes
wrote:
> This guy has lots and lots of info posted.
> http://oudemercedesbrochures.nl/index.html
http://oudemercedesbrochures.nl/W124_Zeichnungen_1084.html
is quite enlightening (and has a column for English.
Craig
__
On Sat, 24 Jul 2021 20:03:02 -0400 Meade Dillon via Mercedes
wrote:
> and I should replace the alternator pulley with the overrunning type
> (OAP) to reduce the wear and tear on the whole serpentine belt
> tensioning system.
Are these generally available for various types of alternators, or will
https://www.c3headlines.com/2021/07/ipccs-gold-standard-temperature-data-last-725-years-world-has-been-cooling-those-stubborn-facts-.html
IPCC's Gold-Standard Temperature Data: Last 7.25 Years World Has Been
Cooling
The UK's global land and ocean dataset of temperature measurements
confirms there
On Sat, 31 Jul 2021 14:40:19 -0600 Craig wrote:
> https://www.c3headlines.com/2021/07/ipccs-gold-standard-temperature-data-last-725-years-world-has-been-cooling-those-stubborn-facts-.html
>
> IPCC's Gold-Standard Temperature Data: Last 7.25 Years World Has Been
> Cooling
>
> The UK's global lan
On Fri, 30 Jul 2021 02:29:31 + Rick Knoble via Mercedes
wrote:
> > Don't get addicted. Otherwise relax and enjoy it to whatever degree
> > you can.
>
> Thanks Allan. I gave Craig the same admonishment several years ago.
Not only did I not get addicted, I wanted to get off the stuff as rapid
On Sat, 31 Jul 2021 22:59:55 -0400 Scott Ritchey via Mercedes
wrote:
> All this makes sense when you realize these numbers are sufficient to
> protect the wires. Fuses are a whole different animal.
Fuses depend upon the square of the current multiplied by the time
it is applied. (I^2 t)
There
I just turned on mail delivery for the list so I can ask a question
(which I will do separately).
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okieben
On Mon, 25 Jul 2022 18:23:50 -0500 Kaleb Striplin via Mercedes
wrote:
> Welcome back, we have missed you.
Thank you.
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go t
On Mon, 25 Jul 2022 19:24:01 -0400 mitch--- via Mercedes
wrote:
> On 2022-07-25 19:22, Craig via Mercedes wrote:
> > I just turned on mail delivery for the list so I can ask a question
> > (which I will do separately).
>
> Welcome back
On Mon, 25 Jul 2022 19:21:44 -0500 Kaleb Striplin via Mercedes
wrote:
> I just checked a 450SEL I am getting ready to order replacements for.
> It shows them. As far as I know they should all be the same.
So the 300SD and 450SEL are both W116s?
They have:
TRAKMOTIVE MB8003 {MB-8003} Does Not
On Tue, 26 Jul 2022 00:08:49 + "dan penoff.com via Mercedes"
wrote:
> Welcome back, Craig. Hope things are looking up in New Mexico.
Thank you, Dan. I think they are looking a little up.
Craig
___
http://www.okiebenz.com
To search list archives http://
On Tue, 26 Jul 2022 00:12:52 + "dan penoff.com via Mercedes"
wrote:
> If you can’t get aftermarket ones, there are some guys in Colorado who
> are considered the best rebuilders in the business. If they have one on
> the shelf they’ll do a swap with a core charge. They’re not cheap, but
> ver
On Tue, 26 Jul 2022 00:12:52 + "dan penoff.com via Mercedes"
wrote:
> If you can’t get aftermarket ones, there are some guys in Colorado who
> are considered the best rebuilders in the business. If they have one on
> the shelf they’ll do a swap with a core charge. They’re not cheap, but
> ver
On Tue, 2 Aug 2022 11:52:42 -0400 Floyd Thursby via Mercedes
wrote:
> or take them out for a flush then put them in?
This has my vote, if you mean, "then put the new ones in."
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.co
On Tue, 2 Aug 2022 16:58:03 + "dan penoff.com via Mercedes"
wrote:
> Yes. Here’s everything you wanted to know and more about canned air
> dusters:
>
> https://www.chemtronics.com/ultimate-guide-to-canned-air-aerosol-dusters4
Page not found
There are, however, https://www.chemtron
On Wed, 3 Aug 2022 10:45:44 -0500 Randy Bennell via Mercedes
wrote:
> BTW - today is our 49th wedding anniversary.
Congratulations!
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change deliver
On Wed, 3 Aug 2022 11:12:53 -0500 Randy Bennell via Mercedes
wrote:
> The computer in the truck said we were down to about 11.7 l per 100 K
> at one point but by the time we got home it was back up around 12.1.
>
> In any event, my numbers likely won't mean much to you folks south of
On Wed, 3 Aug 2022 18:52:34 + "dan penoff.com via Mercedes"
wrote:
> That reminds me - it’s Hatch pepper season! That means when I head back
> west in a couple of weeks the vendors will be roasting them on the side
> of the road. Yum!
The grocery stores here set up roasters outside their bui
On Thu, 4 Aug 2022 19:17:45 -0400 Buggered Benzmail via Mercedes
wrote:
> For that transmission fluid change
Do not shift gears.
Does that mean not moving the gear selector, or not driving it fast
enough for the transmission to upshift?
Craig
___
http://w
On Thu, 4 Aug 2022 23:45:02 -0400 Dimitri Seretakis via Mercedes
wrote:
> Yes. Last time I changed oil using lift, I missed the oil pan and
> created a big mess, hence the new purchase.
Yes, avoiding a big mess is very desirable!
Craig
___
http://www.okiebe
On Fri, 5 Aug 2022 11:10:57 -0500 OK Don via Mercedes
wrote:
> This is a new one for us!
>
> "A train derailment has delayed delivery. We're adjusting plans to
> deliver your package as quickly as possible."
I have never had them tell me the reason for a delay -- this one is sure
memorable!
>
On Fri, 05 Aug 2022 13:16:11 -0500 Allan Streib via Mercedes
wrote:
> I am hoping to do this without removing the hub. Can these typically be
> knocked out with a hammer? And the new one pulled in by just tightening
> the nut?
IIRC, that's the way a repair shop fixed the studs on a car I had in
On Sat, 6 Aug 2022 11:37:42 -0500 Kaleb Striplin via Mercedes
wrote:
> Getting ready to finish up the AC job on the GL by replacing the front
> expansion valve (still not sure if I should replace the rear one or
> not, or where it is even located). I just realized the replacement
> expansion va
On Sat, 6 Aug 2022 20:54:26 -0500 Kaleb Striplin via Mercedes
wrote:
> I ended up double nutting it and removed the stud and installed on the
> new one.
Yes, that works -- if they didn't use Loctite red ...
I have a small air regulator I am trying to remove the inlet fitting on
and it isn't co
On Mon, 8 Aug 2022 09:15:37 -0700 G Mann via Mercedes
wrote:
> It was a miserable car when sold new. It has not improved with age..
> Sourcing parts was a horrible problem, right off the showroom floor.
> That is unlikely to have improved.
> Ohh... did I mention is has Lucas electricals?
And the
On Mon, 08 Aug 2022 11:43:16 -0500 Allan Streib via Mercedes
wrote:
> Wow a V8 in that little thing?
Sort of like the Sunbeam Tiger ...
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change del
On Mon, 8 Aug 2022 12:02:50 -0500 Kaleb Striplin via Mercedes
wrote:
> As I was getting ready to head out of town I fired up sds to prepare to
> see if there were any codes. I decided to double check the fuse(s) and
> discovered there are actually multiple fuses per seat. Long story short
> after
On Tue, 9 Aug 2022 19:33:09 -0500 Kaleb Striplin via Mercedes
wrote:
> Yea, but the doctor would not refill her prescriptions without the well
> visit. So she could have done that but then would not have got her
> refills done.
For a Medicare Wellness Exam, all you are allowed to talk about is
On Wed, 10 Aug 2022 01:26:31 + Rick Knoble via Mercedes
wrote:
> > On a related note, I nearly got kicked out the last time I went
> > because the triage nurse goes through all of these questions about
> > “feeling centered”
>
> Wait until they are forced to ask if you have any firearms in t
On Wed, 10 Aug 2022 01:43:23 + "dan penoff.com via Mercedes"
wrote:
> Mrs. Dan sees a bunch of different doctors for various things. A
> concierge practice would be perfect for someone like her with multiple
> health issues, as she would actually get time to spend with a
> practitioner who co
On Wed, 10 Aug 2022 02:15:42 + "dan penoff.com via Mercedes"
wrote:
> Thanks, Craig.
>
> The physicians I was looking at in Flagstaff have a practice that’s set
> up using this model. They’re not part of the “wedge”, but the business
> model they use is quite similar.
That is good to hear.
On Fri, 12 Aug 2022 00:09:17 + "dan penoff.com via Mercedes"
wrote:
> Yeah, I’ve seen them come through Flagstaff 18 hours late, sometimes
> more, but typically in the 3-5 hour (late) range is pretty common.
>
> When freight has priority over passenger traffic, you’re going to be
> sitting o
On Thu, 11 Aug 2022 23:41:55 -0400 Buggered Benzmail via Mercedes
wrote:
> Good work truck. Hard to lose on that. You can get a frame hitch easy
> enough or a welding shop could fab one
https://www.etrailer.com/hitch-1993_Dodge_Ram+Pickup.htm
16000 Pound Towing
$258.00
https://www.etrailer.com/
On Tue, 16 Aug 2022 19:57:37 -0500 Kaleb Striplin via Mercedes
wrote:
> How does that work in the winter? Last time I was here it was about 6
> below and this unit produced the heat then.
> >
> > Central chilled water cooling.
Central heated water heating.
Craig
___
On Wed, 17 Aug 2022 11:09:21 -0500 Allan Streib via Mercedes
wrote:
> Turned out to me much easier than hoped. A rare outcome for me when it
> comes to repairs.
>
> A few hammer taps knocked the remains of the broken stud out of the
> back of the hub. There was enough clearance to get it out, an
On Sat, 20 Aug 2022 17:56:37 -0500 Allan Streib via Mercedes
wrote:
> Repaired!
Congratulations!
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebe
On Sun, 21 Aug 2022 13:24:40 -0700 David Bruckmann via Mercedes
wrote:
> Good afternoon,
>
> What do people use for r & r of the fuel filter/drain for W108, 115, 116
> etc?
>
> I measured it as a 24mm, but those seem very scarce on the ground.
> Anyone used a 15/16ths hex instead? I'd just grab
On Tue, 23 Aug 2022 13:58:00 -0400 mitch--- via Mercedes
wrote:
> ___
Where did you find it? It seems to have terms used in Great Britain.
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com
On Tue, 23 Aug 2022 19:07:10 -0400 mitch--- via Mercedes
wrote:
> > Where did you find it? It seems to have terms used in Great Britain.
>
> https://www.ar15.com/forums/general/Every-dashboard-light-in-one-pic/75-2579009/
I clicked on that link and wound up at
https://www.ar15.com/forums/gener
On Wed, 24 Aug 2022 07:16:27 -0400 mitch--- via Mercedes
wrote:
> On 2022-08-24 01:02, Curt Raymond via Mercedes wrote:
> > Oops, appears the post is gone.
>
> I'm sorry.
> For whatever reason, somebody posted that in the members only forum.
> So I can read it and you just get a home page redire
On Thu, 25 Aug 2022 19:13:08 -0500 Kaleb Striplin via Mercedes
wrote:
> https://www.copart.com/lot/56387872
No, not Semi Easy fix.
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
On Thu, 25 Aug 2022 22:58:34 -0400 Buggered Benzmail via Mercedes
wrote:
> https://www.copart.com/lot/52522972/2021-porsche-911-carrera-s-ca-martinez
Yup, a banged-up Porsche.
> Has a pedigree and provenance. Minor altercation with a Jeep.
How did you find that out?
Craig
On Thu, 25 Aug 2022 22:08:32 -0500 Allan Streib via Mercedes
wrote:
> Basically a new car, and damaged badly enough to write it off. Run away.
Yes, as fast as you can. I was thinking instead of a run-in with a Jeep
it was more like boy racer oversteering with the engine in the back and
banging i
On Fri, 26 Aug 2022 13:07:54 -0500 Allan Streib via Mercedes
wrote:
> For a variety of reasons I've been thinking about putting in a wood
> stove. I'd like something well made and efficient but also reasonably
> attractive to look at. Any recommendations?
We had Vermont Castings stoves in the lo
On Fri, 26 Aug 2022 18:37:54 -0400 greg via Mercedes
wrote:
> For efficiency, pellet stoves are a good bet. They are very popular here
> in the PNW. A typical setup here is a pellet stove backed up by
> resistance baseboard heat. They require less attention than a
> traditional woodstove and util
In looking at the breaker box in the building here for possible
installation of a 30 A breaker, I found there already is one installed.
The wires which connect to it go up to the top of the breaker box and
disappear into a thimble which connects to a piece of conduit (I think)
which goes I know not
On Sat, 27 Aug 2022 00:55:49 + (UTC) Curt Raymond via Mercedes
wrote:
> After our talk about COVID the other day imagine my excitement when I
> came down with it...
I'm not sure it's something about which to be excited ...
> It's only the 3rd class I've canceled in 16 years...
That speaks
On Fri, 26 Aug 2022 20:46:39 -0500 Allan Streib via Mercedes
wrote:
> I believe that there is a device that can be attached to the circuit
> that will put a high frequency signal on the wire, which then acts as a
> broadcast antenna. A separate device acting as a receiver can be used
> to trace t
quite close (even on) the breaker. How would that work with wire
inside a conduit or BX cable?
Craig
> > On Aug 26, 2022, at 10:47 PM, Craig via Mercedes
> > wrote:
> >
> > On Fri, 26 Aug 2022 20:46:39 -0500 Allan Streib via Mercedes
> > wrote:
> >
> &g
On Wed, 31 Aug 2022 13:16:53 -0500 Kaleb Striplin via Mercedes
wrote:
> https://www.benzworld.org/threads/1968-300sel-6-3-for-parts-non-running.3104214/
Remember the M100 handshake ...
Craig
___
http://www.okiebenz.com
To search list archives http://www.ok
On Wed, 7 Sep 2022 15:45:06 -0500 Kaleb Striplin via Mercedes
wrote:
> The prices of these have skyrocketed lately. A year or 2 ago you could
> buy a 72” for under a grand. Now they are $1500 or more.
The 56" boxes used to be about $650, now they are $920.
In addition, I don't see the gauge of
On Wed, 7 Sep 2022 19:00:51 -0500 Kaleb Striplin via Mercedes
wrote:
> Both are bottoms, I do not have tops for either and not sure I will get
> tops for them, I use the top for a work surface.
That is my thinking as well.
Craig
___
http://www.okiebenz.com
On Thu, 8 Sep 2022 19:11:10 -0400 Buggered Benzmail via Mercedes
wrote:
> I wonder if I can try to recharge the old one. It’s like a little
> burglar alarm battery, just a small thing. Maybe with the small
> maintainer/charger?
What manufacturer/model is "the small maintainer/charger"?
> Maybe
On Mon, 12 Sep 2022 13:16:38 -0700 Bob Rentfro via Mercedes
wrote:
> Now that the MIL is ensconced in her assisted care facility, we are
> taking off on a little ten to 14 day road-trip. Taking the new Outback.
> Putting the backseats down and loading up with some of our grandparents
> stuff and
On Mon, 12 Sep 2022 13:47:21 -0700 Bob Rentfro via Mercedes
wrote:
> I see that Moriarty exit every time we drive by. We shouldn’t be in a
> rush to get home so I may reach out. If something happens that we end
> up being in a rush to get home I have to do it another time.
If you are headed west
On Tue, 13 Sep 2022 22:49:30 + "dan penoff.com via Mercedes"
wrote:
> Got a used steering wheel for the ML550 that was in really good
> condition, arrived today, so after work I went out to swap it out.
>
> I swapped the whole horn plate and hardware from the original steering
> wh
On Sat, 17 Sep 2022 17:14:15 + "dan penoff.com via Mercedes"
wrote:
> After a restoration of that level, you would think they could have
> restored the generator pulley, wouldn’t you?
Yes, I would. At least put it in Jim Cathey's derusting apparatus and
spray it with the body-colored paint.
On Sat, 17 Sep 2022 10:23:04 -0700 Karl Wittnebel via Mercedes
wrote:
> Anyone have an old 2.42 diff from a 126? The USA sel cars had LSD, but
> not critical. Mine is whining. I guess I could put new bearings in and
> see if that fixes it, but I wonder if it is a bearing or gears that
> fail.
My
On Sat, 17 Sep 2022 16:34:03 -0500 Kaleb Striplin via Mercedes
wrote:
> It sounds like there are still a few chunks in there but I’m calling it
> as good as it’s going to get.
Could you vacuum the chunks out?
Craig
___
http://www.okiebenz.com
To search li
On Sat, 17 Sep 2022 20:29:23 -0500 Kaleb Striplin via Mercedes
wrote:
> It appears the sender is still available but is around $200. I do not
> believe I have one laying around as it appears to be only for late gas
> 116.
>
> On 9/17/2022 5:39 PM, Kaleb Striplin wrote:
> > I took the tube off
On Sat, 24 Sep 2022 08:52:39 -0500 Kaleb Striplin via Mercedes
wrote:
> > On Sep 24, 2022, at 8:51 AM, dan penoff.com via Mercedes
> > wrote:
> >
> > While I’m no fan of the Type II ACC servo, with the available options
> > now I’m less inclined to worry about them.
>
> Yea, you can go the alum
On Wed, 28 Sep 2022 00:37:32 + "dan penoff.com via Mercedes"
wrote:
> Gene Shepard lived there. We used to run into him at the general store
> on Captiva, but I didn’t know the guy from Adam at the time. My folks
> told me who it was some years later, but I remember the guy. It wasn’t
> until
On Wed, 28 Sep 2022 22:48:34 -0400 Buggered Benzmail via Mercedes
wrote:
> There is a stationary front sitting down a bit south. It has been
> keeping the outer bands south of it. By tomorrow afternoon it will get
> rolled over and we will start seeing wind and rain continuing through
> Saturday
On Thu, 6 Oct 2022 01:54:36 + Rick Knoble via Mercedes
wrote:
> > Tear apart the vacuum connector and try to fit 90-degree elbows in
> > there?
>
> That seems like the most Cathey-esque repair.
It does, doesn't it?
> > Take truck to real frame shop to have it all torqued into spec?
>
> I
On Tue, 11 Oct 2022 17:20:38 -0500 Kaleb Striplin via Mercedes
wrote:
> Your screen shots appear to get stripped but I will take your word for
> it.
They show up fine for me. They are attached, not in-line.
Craig
___
http://www.okiebenz.com
To search list
On Thu, 13 Oct 2022 21:07:01 -0500 Kaleb Striplin via Mercedes
wrote:
> Mercedes’ 300D Diesel
> https://stlouis.craigslist.org/pts/d/saint-peters-mercedes-300d-diesel/7543945619.html
He does not have a close-up picture of the up-in-the-air turbo setup, but
it sure looks like it has no air filter
On Fri, 14 Oct 2022 19:56:09 + "dan penoff.com via Mercedes"
wrote:
> Just for grins I clicked on a link for “MRCOOL DIY” mini-splits
> yesterday, and after going to their website got directed to a number of
> different retailers, one of which was Costco. I was just doing some
> research on a
On Sat, 15 Oct 2022 08:46:01 -0400 mitch--- via Mercedes
wrote:
> I just had a thought.
> There's an inverse relationship between altitude and the heat carrying
> capacity of a given volume of air.
> What does that do to the efficiency of a heat pump, in Flagstaff (7k)
> or Moriarty (10k)?
Mori
On Sat, 15 Oct 2022 21:58:31 -0400 mitch--- via Mercedes
wrote:
> On 2022-10-15 13:18, Craig via Mercedes wrote:
> >
> > Moriarty is 6.2k.
>
> I thought when you were sick and recovered enough to go home you went
> home to 10k elevation which your lungs weren't
On Sat, 15 Oct 2022 22:10:29 -0500 Kaleb Striplin via Mercedes
wrote:
> Yea, well, he might want to change the price in his listing, because
> the price is $1
> > https://www.ebay.com/itm/125564332049?hash=item1d3c37a811:g:qrgAAOSwzKxhoil8&amdata=enc%3AAQAHoPg%2FNQpW6ARn0z3iP%2B9qwHrhwgWAFhC
On Fri, 21 Oct 2022 16:30:29 -0700 Jim Cathey via Mercedes
wrote:
> Around here UPS sometimes uses USPS to do the last-mile delivery.
Same here.
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or c
On Sat, 22 Oct 2022 01:50:38 + Rick Knoble via Mercedes
wrote:
> Yep. It's called "Sure post" and it works pretty well, although it may
> cause a one day delay in delivery.
>
> https://mypostofficelocation.com/resources/what-is-ups-surepost/
>
> FedEx has a version too.
>
> https://www.cru
On Sat, 22 Oct 2022 16:02:14 + "dan penoff.com via Mercedes"
wrote:
> https://www.facebook.com/marketplace/item/796973534869557/
Or, one could say, "One for Mitchigan." :-)
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.
On Sat, 22 Oct 2022 20:54:03 -0400 Buggered Benzmail via Mercedes
wrote:
> HF has these on sale for $12. I was thinking to get the 1/4 and 3/8.
> Anyone used these? I’m sure they are ultra-accurate but I’m thinking
> they’re probably “good enough”
I think you meant to say, "I’m sure they are no
On Sun, 23 Oct 2022 16:33:46 + "dan penoff.com via Mercedes"
wrote:
> https://www.thedrive.com/the-war-zone/our-first-look-at-what-fully-upgraded-b-52-bombers-will-look-like
Speaking of Wilton, has anyone heard from him lately?
Craig
___
http://www.okie
On Mon, 24 Oct 2022 21:30:27 -0500 Kaleb Striplin via Mercedes
wrote:
> If I do get the tank clean, will it stay clean or does it need to be
> sealed?
The bare steel will rust quickly; you need to either put gasoline in it
(I think), or seal it. Probably sealing it would be better.
Craig
On Mon, 24 Oct 2022 22:05:43 -0500 Kaleb Striplin via Mercedes
wrote:
> I am just wondering what keeps them from rusting with normal use? I
> guess maybe it gets fresh fuel circulated thru it often enough that it
> leaves a coating on the bare metal keeping it from rusting.
I think that is inde
On Tue, 25 Oct 2022 10:30:56 -0500 Kaleb Striplin via Mercedes
wrote:
> Took the trailer connector apart on the truck and found the power wire
> was just slightly melted and fused to the right turn signal wire. Fixed
> that and all is good.
Congratulations!
Craig
On Tue, 25 Oct 2022 11:42:19 -0400 mitch--- via Mercedes
wrote:
> Found a fixer upper deal for you at the insurance auction.
>
> Lotus Elise.
>
> https://vis.iaai.com/resizer?imageKeys=34841846~SID~B542~S0~I1~RW2592~H1944~TH0&width=845&height=633
Oh, my!
Craig
__
On Tue, 25 Oct 2022 23:56:24 -0400 mitch--- via Mercedes
wrote:
> No Ludwig.
> The sender was Curt Raymond
>
$ host dnr.id
dnr.id has address 103.253.68.212
dnr.id mail is handled by 20 fallbackmx.spamexperts.eu.
dnr.id mail is handled by 10 mx.spamexperts.com.
dnr.id mail is handled by 30 las
On Thu, 27 Oct 2022 18:51:11 -0400 mitch--- via Mercedes
wrote:
> I just had a thought (belatedly) on the rust issue.
> How much washing soda does it take to electrically remove the rust from
> a 20 gallon tank?
> https://www.youtube.com/watch?v=y-WGJHI9eag
That's what Jim Cathey does.
Craig
On Thu, 27 Oct 2022 19:41:24 -0500 OK Don via Mercedes
wrote:
> https://youtu.be/bf3S-Nu2jQY
An interesting process and finished product -- and there seemed to be a
lot of completed mufflers on his shelves.
I wonder how concerned he is about safety. Most of the time it seemed he
did not shield
On Fri, 28 Oct 2022 18:00:48 + "dan penoff.com via Mercedes"
wrote:
> It’s more likely that CarFax is requiring MFA for account
> authentication.
Modified Financial Agreement?
Craig
___
http://www.okiebenz.com
To search list archives http://www.okieben
On Fri, 28 Oct 2022 20:25:40 -0500 Kaleb Striplin via Mercedes
wrote:
> Ordered a set of tires from Walmart. They were sent it 4 different
> shipments all from the same place. First tire went from CA, to NM,
> then KS, and now is in NY. Next tire went from CA to NY, back to CA,
> NY, and now
On Fri, 28 Oct 2022 14:07:04 -0700 Jim Cathey via Mercedes
wrote:
> Before: http://formicapeak.com/~jimc/genset/genhead.jpg
> After: http://formicapeak.com/~jimc/genset/genhead2.jpg
> Pool o' Death (after):
> http://formicapeak.com/~jimc/genset/poolodeath.jpg
My browser says,
The operat
I called Wilton this afternoon and Alice his wife answered the phone.
She said they were not doing very well and were now in a senior living
facility in assisted living. She called Wilton to the phone, so I was
able to talk with him.
He said his tremor was really bad, so bad he cannot use the comp
On Mon, 31 Oct 2022 12:39:08 -0700 Jim Cathey
wrote:
> On Fri, 28 Oct 2022 21:06:32 -0600 Craig via Mercedes
> wrote:
>
> > On Fri, 28 Oct 2022 14:07:04 -0700 Jim Cathey via Mercedes
> > wrote:
> >
> > > Before: http://formicapeak.com/~jimc/
On Wed, 02 Nov 2022 17:13:53 -0400 mitch--- via Mercedes
wrote:
> My oil industry contact said:
>
> "Not the first 303 lawsuit.
> Won’t be the last 303 lawsuit.
> Don’t ever buy 303 fluid."
I am glad 303 is too viscous to use in my 51' Kentucky furniture van's
rear hydraulically operated jacks,
On Fri, 4 Nov 2022 17:28:49 -0400 Buggered Benzmail via Mercedes
wrote:
> Should keep those fuses from blowing
Uhhh ... I don't think so.
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscrib
On Sun, 6 Nov 2022 11:50:10 -0600 Kaleb Striplin via Mercedes
wrote:
> I sure wish I would have done all of this before applying the coating.
> Anyway I think I’m going to have to squirt some carb cleaner in there
> and let it soak. If it’s dried up fuel in the line, if it’s like the
> other crap
On Wed, 9 Nov 2022 10:22:49 -0500 Floyd Thursby via Mercedes
wrote:
> It's in Ro Diland so he could send a coupla listers over to pick it up
>
> https://thembmarket.com/mercedes-benz-w123-green-interior-set
It's not complete; it's missing the door cards and the dash.
Craig
__
On Wed, 9 Nov 2022 09:18:26 -0800 Jim Cathey
wrote:
> > It's not complete; it's missing the door cards and the dash.
>
> Did you read the listing?
You are right. Mea culpa. I did not read the listing; I only looked at the
picture.
Craig
___
http://www.okie
On Wed, 9 Nov 2022 14:10:15 -0500 Buggered Benzmail via Mercedes
wrote:
> I saw pics of it all too
It took a long time for all the pictures to load for me, so when I sent
the email, I had seen only one picture.
Craig
___
http://www.okiebenz.com
To search l
101 - 200 of 5827 matches
Mail list logo