Re: [MBZ] OT cheap cordless drill

2017-09-12 Thread Kaleb Striplin via Mercedes
That's probably what happened to mine. I have had it a while but don't use it that much and the battery will not hold a charge long enough to screw in a couple of screws. I always just left the battery on the charger all the time till I needed it. Sent from my iPhone > On Sep 12, 2017, at

Re: [MBZ] OT cheap cordless drill

2017-09-12 Thread OK Don via Mercedes
I have the little brother - the 12v Bosch drill - and love it so much that I got a second one so I don't have to run between the hangar and the garage, it was always in the other building from where I was working. I think the second one was on "sale" at Lowes for $99 at the time. It has two speeds

Re: [MBZ] OT cheap cordless drill

2017-09-12 Thread Curt Raymond via Mercedes
We have a Dewalt at work and its really nice. When the battery in my Craftsman 19v finally dies I'll probably go with one of those.That said the second battery started dying 2 or 3 years ago probably from lack of use but the "good" one is still fine. I've had the thing nearly 10 years, nothing

Re: [MBZ] OT cheap cordless drill

2017-09-12 Thread Curley McLain via Mercedes
I have a couple HF drills. the charger does not regulate, so it is easy to ruin batteries by overcharging! (forget to take it off the charger) I'd go with the house brand from lowe/HF/maynerds or Dewalt/Milwaukee. I finally broke down and went dewalt because of the ubiquitousness of the

Re: [MBZ] OT cheap cordless drill

2017-09-12 Thread Curley McLain via Mercedes
It works. see my earlier messages from about May, Jolt, then charge/discharge cycles with RC charger to revive dead nicads. Mountain Man via Mercedes September 11, 2017 at 10:57 AM Several youtube about recovery of battery using jolt from welder. Someone of

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Greg Fiorentino via Mercedes
: Re: [MBZ] OT cheap cordless drill Here’s the deal you need on a drill: https://www.amazon.com/Bosch-DDB181-02-Lithium-Ion-Batteries-Contractor/dp/B00N8I29X2/ref=lp_10664393011_1_2?s=hi=UTF8=1505130884=1-2=kinjadeals-20=[t|link[p|1803129315[a|B00N8I29X2[au|5727177402741770316[b|lifehacker Better

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread fmiser via Mercedes
> Dan wrote: > Here’s the deal you need on a drill: > > https://www.amazon.com/Bosch-DDB181-02-Lithium-Ion-Batteries-Contractor/dp/B00N8I29X2/ref=lp_10664393011_1_2?s=hi=UTF8=1505130884=1-2=kinjadeals-20=[t|link[p|1803129315[a|B00N8I29X2[au|5727177402741770316[b|lifehacker > > Better hurry! I

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dan Penoff via Mercedes
Here’s the deal you need on a drill: https://www.amazon.com/Bosch-DDB181-02-Lithium-Ion-Batteries-Contractor/dp/B00N8I29X2/ref=lp_10664393011_1_2?s=hi=UTF8=1505130884=1-2=kinjadeals-20=[t|link[p|1803129315[a|B00N8I29X2[au|5727177402741770316[b|lifehacker Better hurry! -D > On Sep 11, 2017, at

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Randy Bennell via Mercedes
Sounds good. Let us know how it works out for you! RB On 11/09/2017 10:57 AM, Mountain Man via Mercedes wrote: Several youtube about recovery of battery using jolt from welder. Someone of us should try that and let us know? Thanks. tin.man ___

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Randy Bennell via Mercedes
The same shutters have been used now for about 16 winters and really show no deterioration. It is 7/16" rather than just 3/8" but I doubt that makes much difference. They have a coat of white paint on the exterior side. Might only be primer. My mother painted them so I really don't know what

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Randy Bennell via Mercedes
No need to apologize. I found it interesting. RB On 11/09/2017 4:38 PM, Dan Penoff via Mercedes wrote: Sorry for over explaining. Yes, you could reuse the holes. How many times I’m not sure. What most people do in situations like this is use an anchor with a threaded end, which is

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Mitch Haley via Mercedes
OSB would have been about my last choice for something you're planning to leave out in the weather, all winter, for multiple winters... Mitch. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dan Penoff via Mercedes
Sorry for over explaining. Yes, you could reuse the holes. How many times I’m not sure. What most people do in situations like this is use an anchor with a threaded end, which is expoxied into the hole. Then a washer and wing nut to hold the panel in place. -D > On Sep 11, 2017, at

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Randy Bennell via Mercedes
Ok, interesting. We put shutters made out of OSB (chip board) over the windows of our cottage out at the lake in the fall to avoid any damage if a window were to get broken over the winter. We normally close up in October and do not re-open until May.  We use wood screws and just run the

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dan Penoff via Mercedes
I did, however, I don’t plan on reusing it. Here’s why: Time didn’t permit me to do a better job of getting what I needed, so I went 100% low tech. I bought 3/4” treated plywood and 2-3/4” tapcon screws. I screwed the plywood over the window openings directly through my stucco into the

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Randy Bennell via Mercedes
Do you save and mark the site and orientation of the plywood so you can put it back in the same spot using the same holes next time? RB On 11/09/2017 3:43 PM, Dan Penoff via Mercedes wrote: No problem at all. Spun them out in record time. -D On Sep 11, 2017, at 4:40 PM, M. Mitchell

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dan Penoff via Mercedes
No problem at all. Spun them out in record time. -D > On Sep 11, 2017, at 4:40 PM, M. Mitchell Marmel via Mercedes > wrote: > > On Mon, Sep 11, 2017 at 10:19 AM, Dan Penoff via Mercedes < > mercedes@okiebenz.com> wrote: > >> My Chicago Tools 18V HF drill spent the

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread M. Mitchell Marmel via Mercedes
On Mon, Sep 11, 2017 at 10:19 AM, Dan Penoff via Mercedes < mercedes@okiebenz.com> wrote: > My Chicago Tools 18V HF drill spent the last couple of days running nearly > 200 - 2-3/4” Tapcons into concrete block without a hitch. > >

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Kaleb Striplin via Mercedes
Got ya. My drill works fine but the battery is junk. Sent from my iPhone > On Sep 11, 2017, at 10:26 AM, Meade Dillon via Mercedes > wrote: > > Drill Master 18v cordless 3/8 drill/driver for $16 with the coupon. NiCad > batteries. Second battery pack was like $13, I

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dimitri via Mercedes
Well that's impressive! Sent from my iPhone > On Sep 11, 2017, at 11:19 AM, Dan Penoff via Mercedes > wrote: > > My Chicago Tools 18V HF drill spent the last couple of days running nearly > 200 - 2-3/4” Tapcons into concrete block without a hitch. > > -D > >> On Sep

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Craig via Mercedes
On Mon, 11 Sep 2017 11:11:39 -0400 (EDT) Mitch Haley via Mercedes wrote: > I don't buy a cheap cordless drill expecting it to last 10 years with > little to no use, I figure the battery will die in five years (which > might be 5-10 uses) so I buy a cheap 120v drill and

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Meade Dillon via Mercedes
Curly posted something about that earlier, but I looked at what it would cost to purchase the needed electrics, and that exceeded the cost of this new stuff. - Max Charleston SC On Mon, Sep 11, 2017 at 11:57 AM, Mountain Man via Mercedes < mercedes@okiebenz.com> wrote: > > Several

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Mountain Man via Mercedes
Curt wrote: > Let us know, I've got an older 19v Craftsman with a dead battery. Several youtube about recovery of battery using jolt from welder. Someone of us should try that and let us know? Thanks. tin.man ___ http://www.okiebenz.com To search list

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dan Penoff via Mercedes
Don’t know, I’ll have to look. -D > On Sep 11, 2017, at 11:28 AM, Curt Raymond wrote: > > Is that the $99 Hercules or the cheaper one? > > The thing to remember with AVE is he's comparing to Pro gear, could be the HF > unit is fine for most home gamers. > > Curt > >

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Curt Raymond via Mercedes
Is that the $99 Hercules or the cheaper one? The thing to remember with AVE is he's comparing to Pro gear, could be the HF unit is fine for most home gamers. Curt Sent from Yahoo Mail on Android On Mon, Sep 11, 2017 at 8:20 AM, Dan Penoff via Mercedes wrote: My

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Meade Dillon via Mercedes
Drill Master 18v cordless 3/8 drill/driver for $16 with the coupon. NiCad batteries. Second battery pack was like $13, I used the 20% off coupon on that. - Max Charleston SC On Mon, Sep 11, 2017 at 11:21 AM, Kaleb Striplin via Mercedes < mercedes@okiebenz.com> wrote: > Which one

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Kaleb Striplin via Mercedes
Which one did yo get? I need to get a new one Sent from my iPhone > On Sep 11, 2017, at 10:18 AM, Meade Dillon via Mercedes > wrote: > > The Sears cordless drill lasted about 10 years, and at 16 years one of the > battery packs still will hold enough juice to get a few

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Dan Penoff via Mercedes
My Chicago Tools 18V HF drill spent the last couple of days running nearly 200 - 2-3/4” Tapcons into concrete block without a hitch. -D > On Sep 11, 2017, at 11:11 AM, Mitch Haley via Mercedes > wrote: > > I don't buy a cheap cordless drill expecting it to last 10

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Meade Dillon via Mercedes
The Sears cordless drill lasted about 10 years, and at 16 years one of the battery packs still will hold enough juice to get a few small things done. I was tempted to either rebuild the battery packs or replace the battery packs, but when I looked at the cost, this HF deal was a no-brainer. $26.40

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Mitch Haley via Mercedes
I don't buy a cheap cordless drill expecting it to last 10 years with little to no use, I figure the battery will die in five years (which might be 5-10 uses) so I buy a cheap 120v drill and expect it to last a lifetime. Mitch. ___ http://www.okiebenz.com

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Curt Raymond via Mercedes
Let us know, I've got an older 19v Craftsman with a dead battery. I hate to buy another battery for an old drill so I'm considering a whole new drill. I do have one working battery so I guess I'll keep it as long as that lasts. Sent from Yahoo Mail on Android On Mon, Sep 11, 2017 at 6:30

Re: [MBZ] OT cheap cordless drill

2017-09-11 Thread Meade Dillon via Mercedes
Thanks, but that is the "'high end" Hercules drill from Harbor Freight, I bought the cheap-cheap model ($17 vs. $99). For the small amount of use the drill will see in my household, it will probably last another 10 years. - Max Charleston SC On Sun, Sep 10, 2017 at 8:45 PM, Curt

Re: [MBZ] OT cheap cordless drill

2017-09-10 Thread Curt Raymond via Mercedes
AVE did a review recently, he wasn't very complimentary... ;) Curt Sent from Yahoo Mail on Android On Sun, Sep 10, 2017 at 12:28 PM, Max Dillon via Mercedes wrote: Made a run to Harbor Freight with the latest batch of coupons, picked up this 18v cordless 3/8

[MBZ] OT cheap cordless drill

2017-09-10 Thread Max Dillon via Mercedes
Made a run to Harbor Freight with the latest batch of coupons, picked up this 18v cordless 3/8 drill/driver for $17, used the 25% coupon to get an extra battery for $10. Looks like a decent replacement for my dead Sears cordless drill. This new drill is smaller and lighter, I'll bet the