Bravo!
--
Max Dillon
Charleston SC
'87 300TD
'95 E300
On August 6, 2017 6:52:21 PM EDT, "Kaleb C. Striplin via Mercedes"
wrote:
>So the axle I had on hand was too short so it did not come out of a
>124, I think it was a 126 axle. So after remembering the tricks to the
>job I was able to pull an axle out of the rusty e300 in about 10
>minutes. Got it installed in the car. Next up was installing the rear
>exhaust I pulled out of the other car. For some reason it is hanging
>slightly too high. Just enough to cause annoying rattles and it is
>contacting the diff end of the axle and the bolt heads are hitting it
>causing a hell of a noise. I jacked around with it prying it around to
>no avail. I had enough and gave up for the day. Tomorrow I will
>probably drop the exhaust down again and see if bending the rear and
>middle mounting hooks up slightly will drop the exhaust down. It only
>needs to be down probably a quarter of an inch.
>
>Sent from my iPhone
>
>___
>http://www.okiebenz.com
>
>To search list archives http://www.okiebenz.com/archive/
>
>To Unsubscribe or change delivery options go to:
>http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
