TomC!E! BodEC!r wrote:
There must be some funny tricks on those other OS's.But it doesn't
matter (I will investigate myself).
Now I know more about those random generators and tests for real are ok.
Untar of src.tar.gz shows about 9MB/s in iostat(8) and dd ports.tar.gz
to some file
shows
Simen Stavdal wrote:
Hello misc,
I have an openbsd host running that I wish to access in different
manners depending on where the users connect from.
This host runs sftp chrooted for internet users, and at the same time,
I wish to administer the box with ssh.
At the same time, I do not wish
I know.That's why I tested in dd and iostat too.
2009/9/29 Janne Johansson j...@it.su.se:
TomC!E! BodEC!r wrote:
There must be some funny tricks on those other OS's.But it doesn't
matter (I will investigate myself).
Now I know more about those random generators and tests for real are ok.
Hi,
I guess it is time I looked into a deeper aspect of OpenBSD, CARP.
Currently I have two OpenBSD firewalls fw1 and fw2.
fw1 connects to internet a portion of people in LAN which is under the
subnet 172,16,0.0/12 through ISP1
fw2 connects to internet the other portion of people in LAN which is
Siju George wrote:
Is it possible for me to make both fw1 and fw2 listen on ip address
172.17.1.0 and load balance connections through both ISPs?
And also make a fail over set up so that when either ISP1 or ISP2 is
not functioning all hosts in the network going through the other.
-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf
Of Janne Johansson
Sent: Tuesday, September 29, 2009 6:14 AM
To: misc
Subject: Re: Carp basics
Siju George wrote:
Is it possible for me to make both fw1 and fw2 listen on ip address
Here is my e6500:
$ sudo dd if=/dev/rsd0c of=/dev/null bs=1m count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 4.631 secs (113202161 bytes/sec)
On Tue, Sep 29, 2009 at 09:44:53AM +0200, Tom Bodr wrote:
I know.That's why I tested in dd and iostat too.
Hello,
I'm trying to implement CARP on our edge BGP OpenBSD routers. CARP
itself seems to be working perfectly but I'm having problems figuring
out how to propertly configure BGP.
I have couple of external IP's on my network, so limited number of them
is not an issue (as it's often with internet
Hi,
I've a problem with logging packets in bridging mode with pf under -current.
My setup is a machine with em2 ad em3 interfaces in a bridge (no IP
address), witth a ruleset that looks like:
---cut---
admif=em0
table laas const { }
table administrees const { }
table rfc1918 const {
By chrooting it, it's root (/) becomes the directory where you've
chrooted.Hence, as far as I understand, it can't see your /etc/localtime;
you'd need to create inside the chroot directory.
On Fri, Sep 25, 2009 at 06:35, LEVAI Daniel l...@ecentrum.hu wrote:
On Friday 25 September 2009 11.16.14
Hi,
I am trying to install some php extensions on my OBSD 4.5 box, which
is to run a Horde email server.
I am following along, and see that I need 3 extensions via pecl: lzf,
fileinfo and memcache.
I run pecl install fileinfo (for example). It looks like everything
installs just fine,
Hello Peter
Den 29/09/2009 kl. 14.33 skrev peter dunaskin:
Hello,
I'm trying to implement CARP on our edge BGP OpenBSD routers. CARP
itself seems to be working perfectly but I'm having problems figuring
out how to propertly configure BGP.
I have couple of external IP's on my network, so
Den 29/09/2009 kl. 18.24 skrev peter dunaskin:
Hello Soeren,
I'm trying to implement CARP on our edge BGP OpenBSD routers. CARP
itself seems to be working perfectly but I'm having problems
figuring
out how to propertly configure BGP.
I have couple of external IP's on my network, so
On Mon, Sep 28, 2009 at 11:28:51PM +0200, Simen Stavdal wrote:
Hello misc,
I have an openbsd host running that I wish to access in different
manners depending on where the users connect from.
This host runs sftp chrooted for internet users, and at the same
time, I wish to administer the box
Congreso Latinoamericano de Mantenimiento Preventivo y Predictivo
Monterrey 29-30 de octubre de 2009
Guadalajara 05-06 de noviembre de 2009
Mexico D.F. 12-13 de noviembre de 2009
Acapulco 03-04 de diciembre de 2009
USTED CONOCE...
Cual es el defecto que causa el 90% de todas las avermas
On 29/09/2009 00:33, Stuart Henderson wrote:
The only change to ifstated between 4.4 and 4.5 was a minor change
to the config parser. (there was another change after 4.5, so if 4.5
works for someone but -current doesn't, they can try reverting it).
Hi,
Here is what i temporarily did in the
On 2009/09/29 22:38, Laurent CARON wrote:
On 29/09/2009 00:33, Stuart Henderson wrote:
The only change to ifstated between 4.4 and 4.5 was a minor change
to the config parser. (there was another change after 4.5, so if 4.5
works for someone but -current doesn't, they can try reverting it).
On 29/09/2009 23:05, Stuart Henderson wrote:
yep, using ifconfig like that isn't really very clean -
does this help at all?
I did try to revert this change to no avail. :$
On 2009/09/29 23:12, Laurent CARON wrote:
On 29/09/2009 23:05, Stuart Henderson wrote:
yep, using ifconfig like that isn't really very clean -
does this help at all?
I did try to revert this change to no avail. :$
no, that's something different.
Hello,
Iam having issues with Raritan Dominion KX II 32
Most of the macros dont work (most important the one to cal DDB), and
Iam suspecting that is making some OBSD 4.5 boxes to freeze.
Before they froozed this is what the boxes (raritan usb error ) had in
common:
uhidev0 at uhub2 port 2
Vox Laci...a voz do lago
Coro de S.Domingos de Rana
--
Assunto: Tragam os amigos, os tios , as primas, os pais e
irmcos
OodjskdjksBom Dia Coros, Maestros e Coristas
O POVERTY
Estimado Sr.:
Nuestra empresa Formada por Profesionales se
especializa en asesoramiento y comercializacisn de:
Seguros para Empresas e Individuos, (AGRARIOS, COMERCIOS, CONSORCIOS,
CAUCIONES, AUTOMOTORES, MOTOS, MALA PRAXIS MEDICA Y PROFECIONAL, ETC)
Productos y
Miod,
Applied the diff and recompiled current. It works perfectly!!
Thank you,
Greg
Miod Vallat wrote:
After getting an USB keyboard, I noticed no beep when hitting the escape
key in Vi. Plugged in the PS/2 keyboard and I get the beep back!
After doing some googling, it appears that USB
Ola
Meu nome i Cleber Galdino e venho por meio desse email, trazer ao seu
conhecimento nossos servigos e informagco:
msn:s...@galdino.ws
---
Plano Sossegado
Criado para futuros empreendedores, lhe oferecemos um site
24 matches
Mail list logo