apm -A on AC power runs at max, for some time now.
Jan
On Nov 28 06:37:02, l...@ecentrum.hu wrote:
> Hi all,
>
> I don't know since when, unfortunately, but it seems auto-adjusting CPU
> frequency doesn't work anymore on my APU1 and an APU4 PCEngines boards (I
> only have these versions at
Le 28 novembre 2022 08:37:02 GMT+02:00, "Lévai, Dániel" a
écrit :
>Hi all,
>
>I don't know since when, unfortunately, but it seems auto-adjusting CPU
>frequency doesn't work anymore on my APU1 and an APU4 PCEngines boards (I only
>have these versions at hand atm).
>They're both running an
Hi all,
I don't know since when, unfortunately, but it seems auto-adjusting CPU
frequency doesn't work anymore on my APU1 and an APU4 PCEngines boards (I only
have these versions at hand atm).
They're both running an updated fw at v4.17.0.2.
IIRC `apmd -A' + `sysctl hw.perfpolicy=auto' did the
On 28.11.2022 05:50, Kevin Williams wrote:
Greetings.
Has anyone tried to install Solaris 9 into an OBSD LDOM running on a
TS2000?
(I found some information on the mailing list pertaining to different
machines and Solaris versions.)
Sincerely,
N.
We need more information to better
> Greetings.
>
> Has anyone tried to install Solaris 9 into an OBSD LDOM running on a TS2000?
>
> (I found some information on the mailing list pertaining to different
> machines and Solaris versions.)
>
> Sincerely,
> N.
>
We need more information to better assist you.
By LDOM, do you
Greetings.
Has anyone tried to install Solaris 9 into an OBSD LDOM running on a TS2000?
(I found some information on the mailing list pertaining to different
machines and Solaris versions.)
Sincerely,
N.
Short form:
I'm using rad to update local machines with the IPv6 address prefix
currently assigned by Verizon. It runs on my firewall/external router.
The router advertisement destructively changes the route and interface
of an address on that machine.
dhcpcd gets /56 from Verizon fiber
On 27.11.2022 21:07, James Johnson wrote:
Thank you for this interesting perspective.
Combined with the previous advice, I am convinced. I will not try to
have the machine sleep, or even try to put the drives in spun down.
From what you guys are saying, it seems doing so would be
On Sun, Nov 27, 2022 at 09:37:19AM +, James Johnson wrote:
> Hi all,
>
> OpenBSD is amazing. But I need help in configuring it correctly as a
> remote server, rarely used.
>
>
> The main thing I am trying to do is to make it sleep every now and
> then to protect resources. I am very
I tried again, without full disk encryption and it works. System booted
properly to a console login prompt.
On Sun, Nov 27, 2022 at 08:40:57PM +, Mikolaj Kucharski wrote:
> Hi,
>
> I was able to go through installer on today's arm64 snapshot with full
> disk encryption setup. With some
Hi,
I was able to go through installer on today's arm64 snapshot with full
disk encryption setup. With some manual `sh MAKEDEV sd0 sd1` during the
installer I managed to install, but then after first boot passphrase and
boot> prompt I see
booting sr0a:/bsd: 9769...
FACP CSRT DBG2 GTDT IORT APIC
Thank you for this interesting perspective.
Combined with the previous advice, I am convinced. I will not try to have the
machine sleep, or even try to put the drives in spun down. From what you guys
are saying, it seems doing so would be over-engineering.
What are your thoughts regarding
On 27.11.2022 10:37, James Johnson wrote:
Hi all,
OpenBSD is amazing. But I need help in configuring it correctly as a
remote server, rarely used.
The main thing I am trying to do is to make it sleep every now and
then to protect resources. I am very flexible on how to do this, but
have
"Does it just need to wake up to run a script and then shut down again" -> yes,
that's basically that. Of course, requirements might evolve.
"Why does it even have to be a separate machine?" -> There are benefits to
this, including data safety (different location).
Thank you for your help, have
On 2022-11-27, Jan Stary wrote:
> that's why replacing them with SSD might be your best bet.
HDD is likely better for medium-term storage (especially if the device would
be powered down).
https://www.quora.com/How-long-can-SSD-store-data-without-power-Can-data-be-recovered-from-SSD
>> Yes, I
Namaste Misc,
ASSUMPTION
Consider two disks sd0 and sd1 assembled into sd2 with RAID 1C as the
discipline.
QUESTION
Which of the following is the correct way to write random data for the
RAID 1C discipline during installation?
1) # dd if=/dev/urandom bs=1m 2>dd.result | tee /dev/rsd0c >
On Fri, Nov 25, 2022 at 03:32:20AM +0100, Mike Fischer wrote:
>
> > Am 24.11.2022 um 15:07 schrieb u...@disroot.org:
> >
> > Hello!
> >
> > I would like to find some supporting documentation too, if anything is
> > available, but for certain other reasons
> >
On 2022-11-27 12:33:18-0500, Nick Holland wrote:
> Steady-state is easiest on hw. Powering up and down is large power
> surges, and that's generally not good. This is across the board --
> power supply, hard drives, main board, CPU, memory, etc. The only
> part that I think gets a benefit from
> > As for rotating metal disks, they have a lifetime;
> > that's why replacing them with SSD might be your best bet.
>
> In the case of an SDD, is there no consideration of turning them off,
> if they are unused for some time?
No.
> In the case of HDD, are you saying that putting them in "spun
> On 27 Nov 2022, at 17:28, Jan Stary wrote:
>
> On Nov 27 17:10:11, mytraddr...@gmail.com wrote:
>> I am not intending to switch the machine.
>
> Why?
It is just not an option for this specific project.
>
>> In terms of resources, I am mainly concerned about hard drives
>> and cpu being
On 11/27/22 12:10, James Johnson wrote:
Thanks for your response.
I am not intending to switch the machine. In terms of resources, I am
mainly concerned about hard drives and cpu being worn down
unnecessarily. I am not sure how much of a concern this should be
though.
The CPU isn't going to
On Nov 27 17:10:11, mytraddr...@gmail.com wrote:
> I am not intending to switch the machine.
Why?
> In terms of resources, I am mainly concerned about hard drives
> and cpu being worn down unnecessarily. I am not sure how much
> of a concern this should be though.
The CPU is not being "worn
Thank you for the pointer, I will look into that.
> On 27 Nov 2022, at 14:13, T K wrote:
>
> "I have been able to lower the CPU speed by running `apm -L`."
> For automation purposes consider using obsdfreqd (pkg_add obsdfreqd) instead.
>
> niedz., 27 lis 2022, 10:39 użytkownik James Johnson
Thanks for your response.
I am not intending to switch the machine. In terms of resources, I am mainly
concerned about hard drives and cpu being worn down unnecessarily. I am not
sure how much of a concern this should be though.
Yes, I do know in advance when the machine needs to run and when
On Nov 27 09:37:19, mytraddr...@gmail.com wrote:
> The main thing I am trying to do is to make it sleep
> every now and then to protect resources.
How much eletricity does the machine eat?
(What other "resources" are you concerned about?)
> 1) Make it sleep and wake up when woken up remotely
> I
"I have been able to lower the CPU speed by running `apm -L`."
For automation purposes consider using obsdfreqd (pkg_add obsdfreqd)
instead.
niedz., 27 lis 2022, 10:39 użytkownik James Johnson
napisał:
> Hi all,
>
> OpenBSD is amazing. But I need help in configuring it correctly as a
> remote
Hi all,
OpenBSD is amazing. But I need help in configuring it correctly as a remote
server, rarely used.
The main thing I am trying to do is to make it sleep every now and then to
protect resources. I am very flexible on how to do this, but have been unable
to do so.
Here's what I tried :
27 matches
Mail list logo