#
Is it safe to go to the install step? If not what's next? I've saved the
outputs of all the commands from login through cvs steps and all the
make steps if that is needed.
Joe Szedula
Email: [EMAIL PROTECTED]
I use a command like:
cpio -o -z -v -F /dev/rst0 in.lst out.lst
to perform a backup. But when I attempt to index the tape contents using:
cpio -i -t -v -z -F /dev/rst0
I get:
gzip: /dev/stdin: unrecognized file format
cpio: End of archive volume 1 reached
Oct 7 11:50:48 sys /bsd: st0:
doesn't use stdin or
stdout (except for lists of files and messages) does it? Doesn't -z on
the cpio command line mean Compress/Uncompress archive using gzip(1)
format.
Joe Szedula
Email: [EMAIL PROTECTED]
). The seller was kind enough to list the
chipset in the product description.
Joe Szedula
Email: [EMAIL PROTECTED]
Just tried adding a SATA drive to my ASUS K8S-MX system using -current
(as of August 13th) and got the following message (repeated twice before
the system hung up) during the boot:
wd2(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
This is similar to the problem I had
I've installed the amd64 -current (13 August) on my ASUS K8S-MX system.
It solved the bus-master DMA error problem as well as the problem with
the drives (CD hard disk) on the secondary IDE not being recognized. I
compiled the kernel and the rest of the system from source just to
exercise the
On 8/14/05 10:29 AM, Jonathan Gray ([EMAIL PROTECTED]) wrote:
Does this:
SIS 182 SATA rev 0x01 at pci0 dev 5 function 0 not configured
just mean there were no SATA drives connected? Will SATA drives work when
connected to this motherboard?
No this means no driver has claimed that device.
someone has any words of wisdom for fixing my problems with the
ASUS K8S-MX (like 3.7 -current works) it looks like I've managed to get
an unworkable motherboard. Anyone have any recommendations for solutions?
Replacement motherboards? Will OpenBSD 3.8 support this motherboard?
Joe Szedula
On 7/11/05 9:57 PM, Rene Rivera wrote:
I'm considering implementing a disk based backup system using USB2
hot-swap bays.
* Do others have such a system in use? And how is it working out?
* Has anyone done throughput measurements? How close to the 480Mbds
theory is practice?
* Are there
9 matches
Mail list logo