iked log messages when no traffic is on vpn tunnel

endelijke groet/Kind Regards, Peter van Oord van der Vlies

Re: 6.3 just died (not for the first time)

Hi Harald, > >please check the threads on the b...@openbsd.org mailing list. The patch >posted by Martin Pieuchot seemst to help. Its running on my hosts for >5 days without any hiccup. I applied them also on my systems on the 22 and they are still stable. So it seems this

Re: 6.3 just died (not for the first time)

Hello, Anyone found an solution for this or is there more information required ? This night it happened 2 times in less then 3 hours time. Please let me know. Running 6.3 with all syspatches applied. Kind Regards, Peter van Oord van der Vlies On 15/05/2018, 23:30, "owner-m...@openbs

Re: 6.3 just died (not for the first time)

I have seen the same error here on a host around 2 days after the upgrade to 6.3 inclusing patches. The keyboard wasnt working for me but the panic was the same. Op 15 mei 2018 om 23:30 heeft Harald Dunkel > het volgende geschreven:

Re: Failed syspatch 63-007 on i386 (verified but gzip i/o error)

Same here. Best Regards, Peter van Oord van der Vlies - Dear misc@, I do not know which mailing list is the best one for such report, so I start here. Syspatch worked

Re: ipv6 nd

ia_pd 2 vether6/1 #slaac private Van: Peter van Oord van der Vlies Verzonden: dinsdag 20 maart 2018 00:27 Aan: misc@openbsd.org Onderwerp: ipv6 nd Hello Misc, Today i replaced my cisco 881 because it wasn't able to handle the bandwidth anymore. I had

Re: ipv6 nd

On Tue, Mar 20, 2018 at 08:47:26AM +0100, Mischa wrote: > > On 20 Mar 2018, at 08:41, Marc Peters wrote: > > > > I use dhcpcd for on the WAN Interface to receive the prefix delegation. On > > the internal network, i use slaac with rtadvd. The README for dhcpcd > > provides

Re: ipv6 nd

  On Tue, Mar 20, 2018 at 12:19:09AM +, Peter van Oord van der Vlies wrote: > > > > Is slaacd or a dhcpv6 client running? > > Yes i tried with slaacd > Does `slaacctl show interface $if` reflect that a router advertisement > has been received? No, only this :

Re: ipv6 nd

> Is slaacd or a dhcpv6 client running? Yes i tried with slaacd > -- > 0x7D964D3361142ACF On Mon, Mar 19, 2018, at 16:27, Peter van Oord van der Vlies wrote: > Hello Misc, > > > Today i replaced my cisco 881 because it wasn't able to handle the > bandwidth anymore. &g

ipv6 nd

Hello Misc, Today i replaced my cisco 881 because it wasn't able to handle the bandwidth anymore. I had a working ipv6 setup for years with the following relevant part from my cisco wan interface config part: ipv6 address autoconfig ipv6 enable ipv6 nd ra interval 30 ipv6 dhcp

isakmp crash

Hello Misc, I have 2 firewalls in a failover setup running site-to-site vpn tunnels. Once in a while ISAKMP stops, not always i can find the stop error but 2 times i have seen now this error : sendmsg (48, 0x7f7dee10, 0): No buffer space available The systems are on OpenBSD 6.0 now but on

Re: hotmail rejecting messages relay=mx4.hotmail.com., dsn=5.1.2, stat=Host unknown (Unknown error: 275)

Op 23 mei 2015 om 17:54 heeft Peter Fraser p...@thinkage.ca het volgende geschreven: Any message sent to send mail seems to be rejected. The mx4 name changes, but the rejection is always the same. It would be nice to know what the unknown error is Does anyone have any idea what is

IPSEC with redundant remote peer address

Hello List, Does anyone know a way to built a setup when remote IPSEC endpoint got a failover setup on the IPSEC side ? On cisco IOS it's possible to configure multiple peers, when a peer dies it will try the other on the list. Anyone tried to fix this when the remote end is a cisco IOS device

Re: Is Soekris OpenBSD friendly?

for sure it’s a good device with openbsd, only price is sometimes an issue. I have been using it for more then 8 years now and works great, never had an hardware failure. Even the oldest devices are still up and running but are getting to slow.. On 16 Nov 2013, at 01:03, SmithS smit...@hush.ai

Re: www.openbsd.org down?

http://www.isup.me/www.openbsd.org it's down ( also from the netherlands ) On Jun 25, 2013, at 1:17 PM, Killman BOFH kill...@dkcorp.ec wrote: http://www.isup.me/openbsd.org *Enterprise Networks* Blog: unixlegion.com GPG Key: *0xBBDC0CDE* OpenNIC Project: opennic.sle.ec *IT Security

Re: OpenSMTPD getting closer to stable ;-)

smtp.sessions.active=0 smtp.sessions.maxactive=29 smtp.sessions.timeout=4 smtp.sessions.smtps=0 smtp.sessions.smtps.active=0 smtp.sessions.smtps.maxactive=0 smtp.sessions.starttls=0 smtp.sessions.starttls.active=0 smtp.sessions.starttls.maxactive=0 Keep up the good work ! Kind Regards, Peter van Oord

Re: Unbound in base

Hello, Why replacing bind ? Kind Regards Peter - Oorspronkelijk bericht - Van: Bjvrn Ketelaars [mailto:bjorn.ketela...@hydroxide.nl] Verzonden: Monday, February 13, 2012 10:35 PM Aan: misc@openbsd.org misc@openbsd.org; t...@openbsd.org t...@openbsd.org Onderwerp: Unbound in base

Re: bgpctl shiw rib out displaying incorrect information

flags destination gateway lpref med aspath origin AI* 10.0.1.0/24 172.29.1.200 100 0 i current1# What is incorrect on this ?

HP DL320 G6 shared network adapter not working

Hello misc, I am installing several HP DL320G6 servers and see there are some problems with the Network Adapter that is shared with ILO2 . When openbsd boots the ILO adapter becomes unavailable and within openbsd the interface bge0 is not usable. It's connected at 10BaseT but in real it's

strange problem when using aliases

Hello All, There is a strange issue when using aliases on a network interface and the client is using the alias address as default gateway. For example i have : trunk0: flags=8943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST mtu 1500 lladdr 00:18:fe:2e:e4:81 priority: 0

routing issue with carp

Hello list, I have a setup with 2 firewalls (openbsd 4.7 MP ) and using carp for redundancy. All systems are using the ip number of the inside carp interface as default gateway. There is another router in that subnet that is used to reach another network so i have static route to that network on

Re: undeadly.org IPv6 reachability

On Sun, 16 Aug 2009, Denis Fondras wrote: Hello Misc, Since a few day, I can't connect to Undeadly.org over IPv6 (works well over v4). For me the same, takes forever to load the page. gr, peter

Re: Boxes hanging intermittently. Anybody seen such ?

For me the same issue on a couple of boxes. The only common thing for me is : - Soekris - SpamAssassin - Clamav-milter - PF + spamd - Sendmail Most of the boxes runs without any problems for years and sometimes it dies... Peter On Mon, 17 Aug 2009, Michal wrote: Is there a set time

Re: Ultrabasic guide to NAT

On Fri, 3 Jul 2009, Manuel Ravasio wrote: I'm still missing a point: how do I map more than 1 IP address on a single physical interface? Is there something like Linux' and Solaris' ifconfig [interface]:1 blah blah blah ? ifconfig ifname alias ipnumber 255.255.255.255

apache DOS tool

Hi, Today i some pages are publishing news about a apache DOS tool for example (http://isc.sans.org/diary.html?storyid=6601) and http://ha.ckers.org/blog/20090617/slowloris-http-dos/ Does this applies to the openbsd apache to ? Peter

Re: slim and capable hardware for firewalls use

The HP DL360 works very well. We are running more then 40 of those systems for more then 5 years now. I have tried some DL320 but they are not that fast as the 360's and i don't like ATA/SATA . On Mon, 15 Jun 2009, Peter N. M. Hansteen wrote: I've been asked to hunt for hardware that meets