Well, FreeBSD did do it after all. I only had 1 instance of
Wifi connectivity issue so far but zero wifi disconnects, like
I constantly had on OpenBSD. Shady.
On Thu, Apr 4, 2024 at 10:50 PM Peter N. M. Hansteen wrote:
>
> On Thu, Apr 04, 2024 at 07:22:01PM +0500, ofthecentury wrote:
&g
Okkk, device hangups still occur. But there's some
statistics at least in FreeBSD, by running
`sysctl dev.ath`...anything like that in OpenBSD?
On Thu, Apr 4, 2024 at 6:54 PM ofthecentury wrote:
>
> Here's the solution to the athn0 driver constant cop outs.
> I installed FreeBSD an
ofthecentury wrote:
>
> Frolicking through the net80211 jungle of the code, it looks like
> the authenticated wifi client info is stored by the kernel and not exposed
> to the userspace. But I'm still not 100% sure which source file does
> it and what variable holds that. I see net80211
frames. Is that where an authenticated user would be
saved? Or is there something above net80211 that will handle that?
On Wed, Apr 3, 2024 at 12:22 AM Peter J. Philipp wrote:
>
> On Tue, Apr 02, 2024 at 11:20:52PM +0500, ofthecentury wrote:
> > I'll take a look at those locations, than
1:59PM +0500, ofthecentury wrote:
> > Where does OpenBSD keep a list of all wireless clients that have
> > been authenticated? Not the dhcpd leases list. Actual wireless stations
> > that have authenticated to an interface running in hostap mode. Not arp
> > cache, is it
PM Peter N. M. Hansteen wrote:
>
> On Sat, Mar 30, 2024 at 08:59:49PM +0500, ofthecentury wrote:
> > And now something else happened, which seems like a big
> > bug.
> > athn0 sent a reason 6 deauthentication to my wifi client
> > after I cycled the athn0 wifi
- deauthenticating
an already authenticated client. I don't even understand why
the athn0 hostap wouldn't just re-associate the already authenticated
client, especially since I have the nwflag "stayauth" turned on
on the interface.
On Sat, Mar 30, 2024 at 8:30 PM ofthecentury wrote:
>
>
>
> On Sat, Mar 30, 2024 at 05:44:32PM +0500, ofthecentury wrote:
> > On Sat, Mar 30, 2024 at 5:29 PM Peter N. M. Hansteen
> > wrote:
> > >
> > > why?
> >
> > I got "disassoc"s events in the log.
>
> disassociations can happen for a nu
d scanning of
wifi networks that shows up in the log, which is normal
from what I gather, but I get constant, constant network
node cache purges for some reason...like, twice per minute
with up to 8 stations per node cache purge, which does
not seem that excessive.
On Sat, Mar 30, 2024 at 5:44 PM of
On Sat, Mar 30, 2024 at 5:29 PM Peter N. M. Hansteen wrote:
>
> why?
I got "disassoc"s events in the log.
> The option to make the driver output more information is
>
> debug
I did this. "ifconfig athn0 debug." That's how I saw "disassoc"
events.
Anyone can send disassociation events to the
I have an athn0 wifi hotspot going.
I think I get wifi dissassoc attacks.
I know I'm just mitigating for now, but
I cycle the wifi interface periodically,
and that gets my client device back online.
I actually don't understand why cycling
the interface gets my wifi device back
online. Maybe it's
I just don't even learn to know what cu is.
It's fantastic, everything works great.
On Fri, Mar 29, 2024 at 5:02 PM Florian Obser wrote:
>
> On 2024-03-29 08:12 +01, Evan Sherwood wrote:
> > Before I learned about the tilde sequences, I just unplugged the USB
> > adapter. That quits cu.
> >
>
(Fri) at 16:25:08 +0500 (+0500), ofthecentury wrote:
> :Thanks. This does work on an interface, but not on -r /var/log/pflog?
> :
> :On Fri, Mar 22, 2024 at 3:54 PM Stefan Sperling wrote:
> :>
> :> On Fri, Mar 22, 2024 at 03:39:57PM +0500, ofthecentury wrote:
> :> &
Thanks. This does work on an interface, but not on -r /var/log/pflog?
On Fri, Mar 22, 2024 at 3:54 PM Stefan Sperling wrote:
>
> On Fri, Mar 22, 2024 at 03:39:57PM +0500, ofthecentury wrote:
> > I am getting wireless disassociation attacks.
> > I wanted to look at the packets
I am getting wireless disassociation attacks.
I wanted to look at the packets via:
`tcpdump -nettt -I -i athn0 -s 256
type mgt subtype disassoc`
but I get an error:
"tcpdump: type not supported on linktype 0x1"
Should work according to man tcpdump.
2:22PM +0500, ofthecentury wrote:
> > I boot with 'boot -c' and then
> > enter 'disable mei' and then
> > 'quit'.
> > Pcidump still shows Intel MEI,
> > just as it does when booting
> > with default config. I don't
> > think anything changed.
> > But
On Sat, Mar 16, 2024 at 7:29 PM Nick Holland
wrote:
> Again, an incorrect assumption. boot -c does NOT retain
> changes between boots. UKC> is after the kernel is loaded
> but before the kernel is fully running. While in ukc>,
> the kernel doesn't really have an ability to write to
> disk, as
I boot with 'boot -c' and then
enter 'disable mei' and then
'quit'.
Pcidump still shows Intel MEI,
just as it does when booting
with default config. I don't
think anything changed.
But UKC doesn't complain
when I disable mei, so I know
it knows 'mei' and disables it.
But how would I know it
does
Oh, so perfect, thx.
Believe it or not,
I have used a
mechanical
typewriter before.
And also the
matrix printers
(resulting in
partial hearing
loss, probably).
On Fri, Mar 15, 2024 at 11:36 PM Nick Holland
wrote:
>
> On 3/15/24 07:56, ofthecentury via misc wrote:
> > When you want
urious how it's possible to debug this
on OpenBSD. Is there a way to enable debug
level verbosity on drivers? /var/log/messages
is so bareboned, almost spartan I would dare
to put forth.
On Fri, Mar 15, 2024 at 5:11 PM Laurence Tratt via misc
wrote:
>
> On Wed, Mar 13, 2024 at 05:12:29PM +05
When you want to turn off
a device on OpenBSD you
can do it at boot time with
manual `boot -c` command.
(Can also be automated)
After entering entering
`boot -c` you get UKC>
configuration prompt.
I type `list` and get a nice
list of all drivers I can
disable with `disable
mei` or disable `lpc`.
of me using OpenBSD due to the way OpenBSD was
centered around code auditing and only releasing something very
stable and tested, especially something so senstive as graphics.
On Wed, Mar 13, 2024 at 5:42 PM Zé Loff wrote:
>
> On Wed, Mar 13, 2024 at 05:01:57PM +0500, ofthecentury wrote:
> &
My USB mouse and keyboard hang intermittently.
Very weird things happen, i.e. my mouse's red LED
light begins to flicker in a very weird fashion, or my
keyboard stops responding and my sound output
is suddenly muted by itself (I don't even touch sound).
This was in the /var/log/messages
Just saw this in my /var/log/messages:
'/bsd: drm:pid1338:intel_pipe_update_start *ERROR*
[drm] *ERROR* Potential atomic update failure on pipe B'
Intel_pipe_update???
Not default here for some reason. Didn't change $HOME
at all.
On Wed, Mar 13, 2024 at 4:14 PM Stuart Henderson
wrote:
>
> On 2024-03-13, ofthecentury wrote:
> > After poking around, it turns out you just need to
> > add an environmental variable XAUTHORITY in XFCE ter
¯AM Stuart Henderson
wrote:
>
> On 2024-03-09, ofthecentury wrote:
> > For the droves who have/will have the same question:
> > You can disable DPMS by tweaking the Xorg config
> > out. First, get the monitor identifier from your
> > /var/log/Xorg.0.log. Then, add a
On Mon, Mar 11, 2024 at 11:22 PM Eric Furman
wrote:
> You don't happen to have an Xbox type controller plugged
> into your computer by any chance do you?
I do not. Only USB keyboard.
Speaking of USB keyboards. I get this second USB
keyboard interface which I always disable on Linux
with udevadm
ra instead of openbsd and not reading
> source code
>
> On Fri, March 8, 2024 4:43 pm, ofthecentury wrote:
> > I have a USB mouse that starts to move a little
> > on its own once in a while when I'm browsing the internet using chromium.
> > My USB keyboard
> >
Also need to see your pf firewall ruleset (pfctl -sr) probably.
On Sun, Mar 10, 2024 at 4:29 PM Zé Loff wrote:
>
> On Sun, Mar 10, 2024 at 10:00:23AM +, Hari wrote:
> > Hello,
> >
> > I wanted to connect my openbsd system to wifi. So I downloaded and
> > installed the
> > the necessary wifi
Maybe the issue is running it in XFCE from an xfce4-terminal.
On Sun, Mar 10, 2024 at 5:22 AM Stuart Henderson
wrote:
>
> On 2024-03-09, ofthecentury wrote:
> > For the droves who have/will have the same question:
> > You can disable DPMS by tweaking the Xorg config
&
LVDS0" [insert your monitor identifier]
Option "DPMS" "false"
EndSection
Kill xenodm and launch xenodm again.
Confirm by running 'xset q' that DPMS is disabled.
Laptop screen will not shut off on you again.
On Sat, Mar 9, 2024 at 9:33 AM ofthecentury wrote:
>
&g
Got it, thanks. But I didn't realize you have to run
'pkg_add -u -D snap' to upgrade all packages
after you upgrade with 'sysupgrade -s'.
On Sat, Mar 9, 2024 at 6:40 PM Thomas Frohwein wrote:
>
> On Sat, Mar 09, 2024 at 02:27:36PM +0500, ofthecentury wrote:
> > I had a similar probl
I had a similar problem this week, for amd64.
The 'packages/amd64' folder on the OpenBSD
mirrors for 7.5 snapshot is also empty. So I
just manually set PKG_PATH to 7.4 packages
folder for the time being.
On Sat, Mar 9, 2024 at 2:15 PM Dmitry Matveyev wrote:
>
> Hi,
>
> I was running an OpenBSD
I cannot turn off dpms so my screen doesn't shut
off after 10 mins (screensaver off already).
When running 'xset s off -dpms' I am getting an
error: 'Authorization required, but no
authorization protocol specified.'
I tried running xhost si:localuser:root, but xhost
gets the same error.
(OpenBSD
It's important to specify the interface when adding
default routes. Thanks. And all clear on egress
then since it is tied to the default route.
On Fri, Mar 8, 2024 at 9:58 PM Stuart Henderson
wrote:
>
> On 2024-03-08, ofthecentury wrote:
> > I made a little progress. I made routin
I have a USB mouse that starts to move a little
on its own once in a while when I'm browsing
the internet using chromium. My USB keyboard
is also acting up...it just started typing spaces all
of a sudden as I was typing up this email and
wasn't reactive to any input until I unplugged it
and
. Maybe there's an issue there somehow?
On Wed, Mar 6, 2024 at 12:54 PM Peter N. M. Hansteen wrote:
>
> On Wed, Mar 06, 2024 at 12:43:28PM +0500, ofthecentury wrote:
> > I'm stumped. Pls help.
> > I plug a TPLink USB ethernet dongle in, it
> > is identified by O
Who's this psycho Jan Stary telling people new to OpenBSD not to use
an appropriate public mailing list for legitimate questions?
-- Forwarded message -
From: Jan Stary
Date: Wed, Mar 6, 2024 at 1:26 PM
Subject: Re: Disk encryption cipher
To: ofthecentury
Stop poluting
I'm stumped. Pls help.
I plug a TPLink USB ethernet dongle in, it
is identified by OpenBSD, and I get a ure0
interface. It says ure0 is up and running. I
give it the ip address, default route, but
nothing happens, I don't get connectivity.
I do everything the same for the USB dongle
as for the
https://github.com/openbsd/src/blob/master/sys/dev/softraid.c
Judging by the source code it's aes-512-xts now.
Such hard. Very cipher. Hacking can't. NSA oh no.
On Wed, Mar 6, 2024 at 12:02 PM Janne Johansson wrote:
>
> Den ons 6 mars 2024 kl 07:17 skrev ofthecentury :
> >
> >
Hi. I cannot find what cipher is used for full
disk encryption on OpenBSD. I saw a mention
of salting too, but really no specifics on what
the encryption algorithm is. Is there somewhere
I can read about it? And really, what is the cipher
used?
utable was running which pid at a
> specific time, you need to put that information in a log, so you can
> associate pid and time with the executable path.
>
> --
> Raul
>
> On Tue, Mar 5, 2024 at 10:26 AM ofthecentury wrote:
> >
> > Well, that's not very noice. Where is sec
Well, that's not very noice. Where is security?
On Tue, Mar 5, 2024 at 7:45 PM Theo de Raadt wrote:
> PID 6504 was my shell. I've logged off now.
>
> What are you expecting here??
>
>
> ofthecentury wrote:
>
> > Yes, I'm tcdupming pflog and ALL my dropped packets
in tcpdump to the process,
and I cannot, and I believe I should be able to for security.
On Tue, Mar 5, 2024 at 7:12 PM Janne Johansson wrote:
> Den tis 5 mars 2024 kl 14:35 skrev ofthecentury :
> >
> > Hi, I'm on a fresh install of OpenBSD 7.4.
> > I am watching output of t
Hi, I'm on a fresh install of OpenBSD 7.4.
I am watching output of tcpdump and
seeing some drops that all reference
UID 0, pid 6504. I cannot find that PID
among running processes. Does anyone
know what is that process and why it's
not running but tcpdump references it?
Thanks!
45 matches
Mail list logo
