On 2007/09/13 10:10, Raimo Niskanen wrote:
> By the way, I recall rumours about some other RAID implementation coming
> in OpenBSD 4.2. Does anyone know, just rumours?
It's there, but not in GENERIC. Note the CAVEATS.
http://www.openbsd.org/cgi-bin/man.cgi?query=softraid
On Wed, Sep 12, 2007 at 10:15:50PM -0700, Jake Conk wrote:
> Hey,
>
> I tried following that article but I got stuck at the part where you
> start partition your second drive. I created the first partition with
> 100mb and type of 4.2 BSD then when I tried to create the second
> partition on my dr
If I remember correctly, you have to use FS type RAID, and not FS type FS_RAID.
for the partition layout, the /boot on 100MB is to allow the machine
to boot, but after that, you put all your files in "logical
subdivisions" of the raid array.
I my case, I didn't use wd*a (/boot) in the /etc/fstab, a
Hey,
I tried following that article but I got stuck at the part where you
start partition your second drive. I created the first partition with
100mb and type of 4.2 BSD then when I tried to create the second
partition on my drive as FS_RAID as the article says but it said that
FS_RAID is an unkno
I personnaly used the following doc to set up my software raid 1 frame :
http://www.linux.com/articles/52713
good luck :)
On 9/12/07, Steve Williams <[EMAIL PROTECTED]> wrote:
> Jake Conk wrote:
> > Hello,
> >
> > I've searched hi and low for hours on how to setup my system of a RAID
> > 1 and ba
Jake Conk wrote:
Hello,
I've searched hi and low for hours on how to setup my system of a RAID
1 and basically what it comes down to is ccd and/or Raid Frame. I've
found helpful docs on using some of the commands and where to put my
configurations but nothing seems complete enough for me to figu
On Wed, Sep 12, 2007 at 04:53:29AM -0700, Jake Conk wrote:
> I have OpenBSD 4.1 installed on one disk and I have an exact duplicate
> disk where i want to mirror my installation to incase of disk failure.
> If this needs to be setup during install I'm willing reinstall
> everything or if there is
Hello,
I've searched hi and low for hours on how to setup my system of a RAID
1 and basically what it comes down to is ccd and/or Raid Frame. I've
found helpful docs on using some of the commands and where to put my
configurations but nothing seems complete enough for me to figure it
out.
I have
8 matches
Mail list logo