For about a month now I have been trying to get my Ralink PCI card
working under OpenBSD - I have had it working under FreeBSD, but could
not get my wireless mouse working there. I a last effort to figure out
why Ralink isn't working on my Fujitsu-Siemens Amilo L7300 laptop I have
to ask the
Hi Anders,
From your dmesg:
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
From RAL(4)
CAVEATS
PCI ral adapters seem to strictly require a system supporting PCI 2.2 or
greater and will likely not work in systems based on older revisions of
the PCI specification.
/jkm
* Anders
On Mon, Jan 23, 2006 at 12:36:46PM +0100, Joakim Aronius wrote:
Hi Anders,
From your dmesg:
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
From RAL(4)
CAVEATS
PCI ral adapters seem to strictly require a system supporting PCI 2.2 or
greater and will likely not work in systems based
Joakim Aronius skrev:
Hi Anders,
From your dmesg:
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
From RAL(4)
CAVEATS
PCI ral adapters seem to strictly require a system supporting PCI 2.2 or
greater and will likely not work in systems based on older revisions of
the PCI
* Jonathan Gray ([EMAIL PROTECTED]) wrote:
On Mon, Jan 23, 2006 at 12:36:46PM +0100, Joakim Aronius wrote:
Hi Anders,
From your dmesg:
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
From RAL(4)
CAVEATS
PCI ral adapters seem to strictly require a system supporting PCI 2.2
or
On 2006/01/23 23:04, Jonathan Gray wrote:
On Mon, Jan 23, 2006 at 12:36:46PM +0100, Joakim Aronius wrote:
Hi Anders,
From your dmesg:
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
From RAL(4)
CAVEATS
PCI ral adapters seem to strictly require a system supporting PCI 2.2
or
I had the same problem, worked on it for a while, was pointed at the Caveats
section of the man page and gave up. I just found the mobo documentation at
Dell and my system should support PCI 2.2 so i guess it should have worked.. As
i remember the interface seemed to be up but it was not
On Mon, Jan 23, 2006 at 01:20:36PM +0100, Joakim Aronius wrote:
* Jonathan Gray ([EMAIL PROTECTED]) wrote:
On Mon, Jan 23, 2006 at 12:36:46PM +0100, Joakim Aronius wrote:
Hi Anders,
From your dmesg:
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
From RAL(4)
CAVEATS
Based on this excerpt from dmesg, I assume that the ral card has been
detected:
ral0 at pci0 dev 6 function 0 Ralink RT2560 rev 0x01: irq 11, address
00:14:a5:0b:85:2b
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
I also tried to check whether the driver had been loaded using
config(8) and
I also have a Ralink adapter. But mine works perfectly. I'm getting good
speed and it is reliable!
What I can remember from when did my setup is that I had to specify
54Mbit to get optimal speed.
This is my hostname.ral0:
nwid media OFDM54 mode 11g
dhcp
And here is ifconfig:
ral0:
10 matches
Mail list logo
