If I remember correctly, you have to use FS type RAID, and not FS type FS_RAID.
for the partition layout, the /boot on 100MB is to allow the machine
to boot, but after that, you put all your files in logical
subdivisions of the raid array.
I my case, I didn't use wd*a (/boot) in the /etc/fstab, as
On Wed, Sep 12, 2007 at 10:15:50PM -0700, Jake Conk wrote:
Hey,
I tried following that article but I got stuck at the part where you
start partition your second drive. I created the first partition with
100mb and type of 4.2 BSD then when I tried to create the second
partition on my drive
On 2007/09/13 10:10, Raimo Niskanen wrote:
By the way, I recall rumours about some other RAID implementation coming
in OpenBSD 4.2. Does anyone know, just rumours?
It's there, but not in GENERIC. Note the CAVEATS.
http://www.openbsd.org/cgi-bin/man.cgi?query=softraid
On Wed, Sep 12, 2007 at 04:53:29AM -0700, Jake Conk wrote:
I have OpenBSD 4.1 installed on one disk and I have an exact duplicate
disk where i want to mirror my installation to incase of disk failure.
If this needs to be setup during install I'm willing reinstall
everything or if there is a
Jake Conk wrote:
Hello,
I've searched hi and low for hours on how to setup my system of a RAID
1 and basically what it comes down to is ccd and/or Raid Frame. I've
found helpful docs on using some of the commands and where to put my
configurations but nothing seems complete enough for me to
I personnaly used the following doc to set up my software raid 1 frame :
http://www.linux.com/articles/52713
good luck :)
On 9/12/07, Steve Williams [EMAIL PROTECTED] wrote:
Jake Conk wrote:
Hello,
I've searched hi and low for hours on how to setup my system of a RAID
1 and basically
Hey,
I tried following that article but I got stuck at the part where you
start partition your second drive. I created the first partition with
100mb and type of 4.2 BSD then when I tried to create the second
partition on my drive as FS_RAID as the article says but it said that
FS_RAID is an
7 matches
Mail list logo
