Markus Hennecke wrote:
Doesn't the bootloader number the com ports from zero on? AFAIR I could
set the bootloader on a DL 385 to use the ILO com port via setting up
com1 in boot.conf. This is a few month since I did that and I have no
physical access to that machine now, so I can't look at it f
On Fri, 30 Nov 2007, holger glaess wrote:
of cause , i try to setup com2 but the system says at bootpromt "com port is
not aviable" , but if the kernel
already loaded the com port is aviable.
there is no setting options at the bios to change the com port from the ipmi
board.
Doesn't the bootl
on: "Stijn" <[EMAIL PROTECTED]>
Gesendet: 29.11.07 22:40:22
An: holger glaess <[EMAIL PROTECTED]>
Betreff: Re: ilo (ipmi) and serial console redirection
Hi,
At the boot> prompt can you enter "set tty com2"? Does it redirect
correctly now? If so add the command to /et
hi
i try to setup the last days the console redirection on al HP DL 145 G2 with
ipmi board ( ilo standard )
the most works i see the post bios output and the first lines of der boot
console of openbsd but there is a first error message
that the com0 is not aviable and this ist true.
the ipmi
4 matches
Mail list logo