The following message to cartasi_info...@cartasi.it was undeliverable.
The reason for the problem:
5.1.0 - Unknown address error 550-'5.1.1 User unknown'
Reporting-MTA: dns; ascentricsm1.telecomitalia.it
Final-Recipient: rfc822;cartasi_info...@cartasi.it
Action: failed
Status: 5.0.0 (permanent
On Fri, Dec 16, 2011 at 08:28:31PM +0100, Christopher Zimmermann wrote:
I want to use aucat as remote and local soundserver. It works with the
following parameters. The only problem is that only one client can
connect at one time. Either remote or local.
-L alix -s default
You have to copy
Hi Stuart and thank you for the excellent info.
It looks like we're good then, our install is due this coming Monday
so I will refer to your mail as we proceed through the initial setup.
Oh, and for the archives s/FTTC/FTTP.
Percy.
On Thursday 15 December 2011, Jonathan Perkin wrote:
I read a long time ago that layered softraid wasn't supported, and
when looking recently I didn't read anything which suggested that had
changed, however on the off-chance I tried it out and it seems to work
ok - at least in limited testing
On Fri, Dec 16, 2011 at 09:41:07PM -0800, Barbier, Jason wrote:
Hey,
its been a while since I have seen any update about how KMS and support for
the Intel HD 3000 (the sandy bridge Intel card). Anyone know what happens
to be going on with that?
KMS porting efforts have stalled for a number
On Sat, 17 Dec 2011, percy piper wrote:
Hi Stuart and thank you for the excellent info.
It looks like we're good then, our install is due this coming Monday
so I will refer to your mail as we proceed through the initial setup.
Oh, and for the archives s/FTTC/FTTP.
Percy.
What vendor for
On 2011-12-17, Diana Eichert deich...@wrench.com wrote:
On Sat, 17 Dec 2011, percy piper wrote:
Hi Stuart and thank you for the excellent info.
It looks like we're good then, our install is due this coming Monday
so I will refer to your mail as we proceed through the initial setup.
Oh, and
Are you using route-to in your configuration?
This has been partly fixed in -current; if the route-to rule is matching
on an outbound packet the deferred packet will be routed correctly.
It is still broken in the case where route-to is on the inbound path;
this is trickier to fix and I'm still
Salut !
J'ai pensi ` toi quand j'ai dicouvert ce jeune artiste sur le net car je sais
que tu aimes le
rap,la soul ,le hip hop.
Voici un lien vers sa dernihre chanson, tu verras il a du talent et un sacri
potentiel.
http://soundcloud.com/dwin-3/dwin-smile-on-prod-ster
Il y a son facebook aussi
Hi,
I am trying to install Openbsd 5.0 on a compaq proliant dl360 G2. I have
tried to do the install with a install cd, a cd50, cdemu, and snapshot
cd50 iso cds. All of them stop at the same point.
When the dmesg reaches the line uhub0 at usb0 ServerWorks OHCI root
hub rev 1.00/1.00 addr 1
If applicable, try switching USB to/from Legacy mode in BIOS.
On Sat, Dec 17, 2011 at 04:54:14PM -0500, Understudy wrote:
Hi,
I am trying to install Openbsd 5.0 on a compaq proliant dl360 G2. I
have tried to do the install with a install cd, a cd50, cdemu, and
snapshot cd50 iso cds. All of
Hi,
The bios do not allow for the change on the USB settings. I have tried
two different smart start cds, neither comes up fully.
Sincerely,
Brendhan
On 12/17/11 21:36, Erling Westenvik wrote:
If applicable, try switching USB to/from Legacy mode in BIOS.
On Sat, Dec 17, 2011 at 04:54:14PM
I can load FreeBSD 8.2 on it no problem. Knoppix livecd also comes up
just fine. I have not tried Debian on the box.
Sincerely,
Brendhan
On 12/17/11 18:39, Richard Thornton wrote:
Debian Linux, have you tried?
On Dec 17, 2011 6:18 PM, Understudy l...@understudy.net
I've had some problems installing 5.0 on a couple of older machines. For
at least two of them upgrading the BIOS did the trick. The latest BIOS
for your ProLiant appears to be 4.1.0:
14 matches
Mail list logo
